DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit]  [PATCH 04/12] v8a: update kernel from v6.6 → v6.8
Date: Sat, 16 Mar 2024 12:18:30 +0100	[thread overview]
Message-ID: <ZfWABt1c4Ax1UY8D@pengutronix.de> (raw)
In-Reply-To: <20240315211240.3016716-5-a.fatoum@pengutronix.de>

On Fri, Mar 15, 2024 at 10:12:32PM +0100, Ahmad Fatoum wrote:
> config changes are those of olddefconfig with the notable exception of

Huh, I tried to do the same but got different results.

> CONFIG_BLK_DEV_WRITE_MOUNTED: This is enabled by default as not to break
> some existing userspace, but we shouldn't have any of that, so disable it.
> This will cause the kernel to refuse writes to mounted block devices.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  configs/platform-v8a/kernelconfig   | 121 ++++++++++++++++++++--------
>  configs/platform-v8a/platformconfig |   4 +-
>  2 files changed, 89 insertions(+), 36 deletions(-)
> 
> diff --git a/configs/platform-v8a/kernelconfig b/configs/platform-v8a/kernelconfig
> index 425a247ac2ab..4daf8080f717 100644
> --- a/configs/platform-v8a/kernelconfig
> +++ b/configs/platform-v8a/kernelconfig
> @@ -1,6 +1,6 @@
>  #
>  # Automatically generated file; DO NOT EDIT.
> -# Linux/arm64 6.6 Kernel Configuration
> +# Linux/arm64 6.8 Kernel Configuration
>  #
>  CONFIG_CC_VERSION_TEXT="aarch64-v8a-linux-gnu-gcc (OSELAS.Toolchain-2023.07.0 13-20230624) 13.1.1 20230624"
>  CONFIG_CC_IS_GCC=y
> @@ -15,6 +15,7 @@ CONFIG_CC_CAN_LINK=y
>  CONFIG_CC_CAN_LINK_STATIC=y
>  CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
>  CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
> +CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
>  CONFIG_CC_HAS_ASM_INLINE=y
>  CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
>  CONFIG_PAHOLE_VERSION=0
> @@ -160,8 +161,10 @@ CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
>  CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
>  CONFIG_CC_HAS_INT128=y
>  CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
> -CONFIG_GCC11_NO_ARRAY_BOUNDS=y
> +CONFIG_GCC10_NO_ARRAY_BOUNDS=y
>  CONFIG_CC_NO_ARRAY_BOUNDS=y
> +CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
> +CONFIG_CC_NO_STRINGOP_OVERFLOW=y
>  CONFIG_ARCH_SUPPORTS_INT128=y
>  CONFIG_CGROUPS=y
>  CONFIG_PAGE_COUNTER=y
> @@ -237,17 +240,17 @@ CONFIG_AIO=y
>  CONFIG_IO_URING=y
>  CONFIG_ADVISE_SYSCALLS=y
>  CONFIG_MEMBARRIER=y
> +CONFIG_KCMP=y
> +CONFIG_RSEQ=y
> +# CONFIG_DEBUG_RSEQ is not set
> +CONFIG_CACHESTAT_SYSCALL=y
> +# CONFIG_PC104 is not set
>  CONFIG_KALLSYMS=y
>  # CONFIG_KALLSYMS_SELFTEST is not set
>  CONFIG_KALLSYMS_ALL=y
>  CONFIG_KALLSYMS_BASE_RELATIVE=y
>  CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
> -CONFIG_KCMP=y
> -CONFIG_RSEQ=y
> -CONFIG_CACHESTAT_SYSCALL=y
> -# CONFIG_DEBUG_RSEQ is not set
>  CONFIG_HAVE_PERF_EVENTS=y
> -# CONFIG_PC104 is not set
>  
>  #
>  # Kernel Performance Events And Counters
> @@ -264,6 +267,7 @@ CONFIG_TRACEPOINTS=y
>  # Kexec and crash features
>  #
>  # CONFIG_KEXEC_FILE is not set
> +# CONFIG_CRASH_DUMP is not set
>  # end of Kexec and crash features
>  # end of General setup
>  
> @@ -319,6 +323,7 @@ CONFIG_ARCH_MXC=y
>  # CONFIG_ARCH_S32 is not set
>  # CONFIG_ARCH_MA35 is not set
>  # CONFIG_ARCH_NPCM is not set
> +# CONFIG_ARCH_PENSANDO is not set
>  # CONFIG_ARCH_QCOM is not set
>  # CONFIG_ARCH_REALTEK is not set
>  # CONFIG_ARCH_RENESAS is not set
> @@ -376,6 +381,7 @@ CONFIG_ARM64_ERRATUM_1508412=y
>  # CONFIG_ARM64_ERRATUM_2441009 is not set
>  # CONFIG_ARM64_ERRATUM_2645198 is not set
>  # CONFIG_ARM64_ERRATUM_2966298 is not set
> +# CONFIG_ARM64_ERRATUM_3117295 is not set

This was enabled for my, but disabling it is correct here.
It's for Cortex-A510.

>  # CONFIG_CAVIUM_ERRATUM_22375 is not set
>  # CONFIG_CAVIUM_ERRATUM_23154 is not set
>  # CONFIG_CAVIUM_ERRATUM_27456 is not set
> @@ -684,6 +690,7 @@ CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
>  CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
>  CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
>  CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y
> +CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
>  
>  #
>  # GCOV-based kernel profiling
> @@ -726,6 +733,7 @@ CONFIG_BLK_ICQ=y
>  CONFIG_BLK_DEV_BSGLIB=y
>  CONFIG_BLK_DEV_INTEGRITY=y
>  CONFIG_BLK_DEV_INTEGRITY_T10=y
> +# CONFIG_BLK_DEV_WRITE_MOUNTED is not set
>  # CONFIG_BLK_DEV_ZONED is not set
>  # CONFIG_BLK_DEV_THROTTLING is not set
>  # CONFIG_BLK_WBT is not set
> @@ -795,9 +803,8 @@ CONFIG_COREDUMP=y
>  # CONFIG_SWAP is not set
>  
>  #
> -# SLAB allocator options
> +# Slab allocator options
>  #
> -# CONFIG_SLAB_DEPRECATED is not set
>  CONFIG_SLUB=y
>  # CONFIG_SLUB_TINY is not set
>  CONFIG_SLAB_MERGE_DEFAULT=y
> @@ -806,7 +813,7 @@ CONFIG_SLAB_FREELIST_RANDOM=y
>  # CONFIG_SLUB_STATS is not set
>  CONFIG_SLUB_CPU_PARTIAL=y
>  # CONFIG_RANDOM_KMALLOC_CACHES is not set
> -# end of SLAB allocator options
> +# end of Slab allocator options
>  
>  # CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
>  # CONFIG_COMPAT_BRK is not set
> @@ -829,6 +836,7 @@ CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
>  CONFIG_PAGE_REPORTING=y
>  CONFIG_MIGRATION=y
>  CONFIG_CONTIG_ALLOC=y
> +CONFIG_PCP_BATCH_SCALE_MAX=5
>  CONFIG_PHYS_ADDR_T_64BIT=y
>  # CONFIG_KSM is not set
>  CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
> @@ -916,6 +924,7 @@ CONFIG_INET_TCP_DIAG=y
>  # CONFIG_TCP_CONG_ADVANCED is not set
>  CONFIG_TCP_CONG_CUBIC=y
>  CONFIG_DEFAULT_TCP_CONG="cubic"
> +# CONFIG_TCP_AO is not set
>  # CONFIG_TCP_MD5SIG is not set
>  CONFIG_IPV6=y
>  # CONFIG_IPV6_ROUTER_PREF is not set
> @@ -1116,7 +1125,6 @@ CONFIG_IP6_NF_TARGET_MASQUERADE=m
>  
>  CONFIG_NF_DEFRAG_IPV6=m
>  # CONFIG_NF_CONNTRACK_BRIDGE is not set
> -# CONFIG_BPFILTER is not set
>  # CONFIG_IP_DCCP is not set
>  # CONFIG_IP_SCTP is not set
>  # CONFIG_RDS is not set
> @@ -1304,7 +1312,6 @@ CONFIG_PCI_HOST_GENERIC=y
>  # Cadence-based PCIe controllers
>  #
>  # CONFIG_PCIE_CADENCE_PLAT_HOST is not set
> -# CONFIG_PCI_J721E_HOST is not set
>  # end of Cadence-based PCIe controllers
>  
>  #
> @@ -1373,6 +1380,7 @@ CONFIG_DEV_COREDUMP=y
>  # CONFIG_DEBUG_DEVRES is not set
>  # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
>  # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
> +CONFIG_GENERIC_CPU_DEVICES=y
>  CONFIG_GENERIC_CPU_AUTOPROBE=y
>  CONFIG_GENERIC_CPU_VULNERABILITIES=y
>  CONFIG_SOC_BUS=y
> @@ -1389,7 +1397,6 @@ CONFIG_GENERIC_ARCH_TOPOLOGY=y
>  #
>  # Bus devices
>  #
> -# CONFIG_BRCMSTB_GISB_ARB is not set
>  # CONFIG_MOXTET is not set
>  # CONFIG_IMX_WEIM is not set
>  # CONFIG_VEXPRESS_CONFIG is not set
> @@ -1422,12 +1429,10 @@ CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
>  CONFIG_ARM_SCMI_TRANSPORT_SMC=y
>  # CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
>  # CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
> -CONFIG_ARM_SCMI_POWER_DOMAIN=y
>  CONFIG_ARM_SCMI_POWER_CONTROL=y
>  # end of ARM System Control and Management Interface Protocol
>  
>  CONFIG_ARM_SCPI_PROTOCOL=y
> -CONFIG_ARM_SCPI_POWER_DOMAIN=y
>  # CONFIG_FIRMWARE_MEMMAP is not set
>  # CONFIG_FW_CFG_SYSFS is not set
>  # CONFIG_TURRIS_MOX_RWTM is not set
> @@ -1436,6 +1441,12 @@ CONFIG_ARM_SCPI_POWER_DOMAIN=y
>  # CONFIG_IMX_DSP is not set
>  # CONFIG_IMX_SCU is not set
>  CONFIG_ARM_PSCI_FW=y
> +
> +#
> +# Qualcomm firmware drivers
> +#
> +# end of Qualcomm firmware drivers
> +
>  CONFIG_HAVE_ARM_SMCCC=y
>  CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
>  CONFIG_ARM_SMCCC_SOC_ID=y
> @@ -1453,7 +1464,6 @@ CONFIG_MTD=y
>  #
>  # Partition parsers
>  #
> -# CONFIG_MTD_AR7_PARTS is not set
>  # CONFIG_MTD_CMDLINE_PARTS is not set
>  CONFIG_MTD_OF_PARTS=y
>  # CONFIG_MTD_AFS_PARTS is not set
> @@ -1658,6 +1668,7 @@ CONFIG_SRAM=y
>  # CONFIG_HISI_HIKEY_USB is not set
>  # CONFIG_OPEN_DICE is not set
>  # CONFIG_VCPU_STALL_DETECTOR is not set
> +# CONFIG_NSM is not set
>  # CONFIG_C2PORT is not set
>  
>  #
> @@ -1665,7 +1676,6 @@ CONFIG_SRAM=y
>  #
>  CONFIG_EEPROM_AT24=m
>  CONFIG_EEPROM_AT25=m
> -# CONFIG_EEPROM_LEGACY is not set
>  # CONFIG_EEPROM_MAX6875 is not set
>  # CONFIG_EEPROM_93CX6 is not set
>  # CONFIG_EEPROM_93XX46 is not set
> @@ -1872,6 +1882,7 @@ CONFIG_NET_CORE=y
>  # CONFIG_VETH is not set
>  CONFIG_VIRTIO_NET=y
>  # CONFIG_NLMON is not set
> +# CONFIG_NETKIT is not set
>  # CONFIG_ARCNET is not set
>  CONFIG_ETHERNET=y
>  # CONFIG_NET_VENDOR_3COM is not set
> @@ -1965,7 +1976,6 @@ CONFIG_DWMAC_GENERIC=y
>  CONFIG_DWMAC_ROCKCHIP=y
>  CONFIG_DWMAC_IMX8=y
>  # CONFIG_DWMAC_INTEL_PLAT is not set
> -# CONFIG_DWMAC_LOONGSON is not set
>  # CONFIG_STMMAC_PCI is not set
>  # CONFIG_NET_VENDOR_SUN is not set
>  # CONFIG_NET_VENDOR_SYNOPSYS is not set
> @@ -2037,6 +2047,7 @@ CONFIG_ROCKCHIP_PHY=y
>  CONFIG_DP83867_PHY=y
>  # CONFIG_DP83869_PHY is not set
>  # CONFIG_DP83TD510_PHY is not set
> +# CONFIG_DP83TG720_PHY is not set
>  # CONFIG_VITESSE_PHY is not set
>  # CONFIG_XILINX_GMII2RGMII is not set
>  # CONFIG_MICREL_KS8995MA is not set
> @@ -2189,6 +2200,7 @@ CONFIG_SERIAL_8250_16550A_VARIANTS=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_DMA=y
>  # CONFIG_SERIAL_8250_PCI is not set
> +# CONFIG_SERIAL_8250_EXAR is not set
>  CONFIG_SERIAL_8250_NR_UARTS=4
>  CONFIG_SERIAL_8250_RUNTIME_UARTS=4
>  # CONFIG_SERIAL_8250_EXTENDED is not set
> @@ -2584,7 +2596,6 @@ CONFIG_GPIO_MAX77620=y
>  
>  # CONFIG_W1 is not set
>  CONFIG_POWER_RESET=y
> -# CONFIG_POWER_RESET_BRCMSTB is not set
>  # CONFIG_POWER_RESET_GPIO is not set
>  # CONFIG_POWER_RESET_GPIO_RESTART is not set
>  # CONFIG_POWER_RESET_LINKSTATION is not set
> @@ -2612,7 +2623,6 @@ CONFIG_POWER_SUPPLY_HWMON=y
>  # CONFIG_CHARGER_SBS is not set
>  # CONFIG_MANAGER_SBS is not set
>  # CONFIG_BATTERY_BQ27XXX is not set
> -# CONFIG_BATTERY_MAX17040 is not set
>  # CONFIG_BATTERY_MAX17042 is not set
>  # CONFIG_CHARGER_ISP1704 is not set
>  # CONFIG_CHARGER_MAX8903 is not set
> @@ -2642,6 +2652,7 @@ CONFIG_POWER_SUPPLY_HWMON=y
>  # CONFIG_CHARGER_UCS1002 is not set
>  # CONFIG_CHARGER_BD99954 is not set
>  # CONFIG_BATTERY_UG3105 is not set
> +# CONFIG_FUEL_GAUGE_MM8013 is not set
>  CONFIG_HWMON=y
>  # CONFIG_HWMON_DEBUG_CHIP is not set
>  
> @@ -2689,12 +2700,14 @@ CONFIG_SENSORS_ARM_SCPI=y
>  # CONFIG_SENSORS_HS3001 is not set
>  # CONFIG_SENSORS_IT87 is not set
>  # CONFIG_SENSORS_JC42 is not set
> +# CONFIG_SENSORS_POWERZ is not set
>  # CONFIG_SENSORS_POWR1220 is not set
>  # CONFIG_SENSORS_LINEAGE is not set
>  # CONFIG_SENSORS_LTC2945 is not set
>  # CONFIG_SENSORS_LTC2947_I2C is not set
>  # CONFIG_SENSORS_LTC2947_SPI is not set
>  # CONFIG_SENSORS_LTC2990 is not set
> +# CONFIG_SENSORS_LTC2991 is not set
>  # CONFIG_SENSORS_LTC2992 is not set
>  # CONFIG_SENSORS_LTC4151 is not set
>  # CONFIG_SENSORS_LTC4215 is not set
> @@ -2804,6 +2817,7 @@ CONFIG_SENSORS_LM90=m
>  CONFIG_THERMAL=y
>  # CONFIG_THERMAL_NETLINK is not set
>  # CONFIG_THERMAL_STATISTICS is not set
> +CONFIG_THERMAL_DEBUGFS=y

Is was disabled by default for me and I would prefer it that way.

>  CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
>  CONFIG_THERMAL_HWMON=y
>  CONFIG_THERMAL_OF=y
> @@ -2958,7 +2972,6 @@ CONFIG_MFD_SEC_CORE=y
>  # CONFIG_MFD_SKY81452 is not set
>  # CONFIG_MFD_STMPE is not set
>  CONFIG_MFD_SYSCON=y
> -# CONFIG_MFD_TI_AM335X_TSCADC is not set
>  # CONFIG_MFD_LP3943 is not set
>  # CONFIG_MFD_LP8788 is not set
>  # CONFIG_MFD_TI_LMU is not set
> @@ -3012,6 +3025,7 @@ CONFIG_REGULATOR=y
>  CONFIG_REGULATOR_FIXED_VOLTAGE=y
>  # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
>  # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
> +# CONFIG_REGULATOR_NETLINK_EVENTS is not set
>  # CONFIG_REGULATOR_88PG86X is not set
>  # CONFIG_REGULATOR_ACT8865 is not set
>  # CONFIG_REGULATOR_AD5398 is not set
> @@ -3038,6 +3052,7 @@ CONFIG_REGULATOR_GPIO=y
>  # CONFIG_REGULATOR_LTC3589 is not set
>  # CONFIG_REGULATOR_LTC3676 is not set
>  # CONFIG_REGULATOR_MAX1586 is not set
> +# CONFIG_REGULATOR_MAX77503 is not set
>  # CONFIG_REGULATOR_MAX77620 is not set
>  # CONFIG_REGULATOR_MAX77857 is not set
>  # CONFIG_REGULATOR_MAX8649 is not set
> @@ -3346,6 +3361,7 @@ CONFIG_USB_CHIPIDEA=y
>  CONFIG_USB_CHIPIDEA_UDC=y
>  CONFIG_USB_CHIPIDEA_HOST=y
>  # CONFIG_USB_CHIPIDEA_MSM is not set
> +# CONFIG_USB_CHIPIDEA_NPCM is not set
>  CONFIG_USB_CHIPIDEA_IMX=y
>  CONFIG_USB_CHIPIDEA_GENERIC=y
>  # CONFIG_USB_CHIPIDEA_TEGRA is not set
> @@ -3464,6 +3480,8 @@ CONFIG_TYPEC_TCPCI=y
>  # CONFIG_TYPEC_MUX_GPIO_SBU is not set
>  # CONFIG_TYPEC_MUX_PI3USB30532 is not set
>  # CONFIG_TYPEC_MUX_NB7VPQ904M is not set
> +# CONFIG_TYPEC_MUX_PTN36502 is not set
> +# CONFIG_TYPEC_MUX_WCD939X_USBSS is not set
>  # end of USB Type-C Multiplexer/DeMultiplexer Switch support
>  
>  #
> @@ -3519,8 +3537,6 @@ CONFIG_MMC_CQHCI=y
>  # CONFIG_MMC_TOSHIBA_PCI is not set
>  # CONFIG_MMC_MTK is not set
>  CONFIG_MMC_SDHCI_XENON=y
> -# CONFIG_MMC_SDHCI_OMAP is not set
> -# CONFIG_MMC_SDHCI_AM654 is not set
>  # CONFIG_SCSI_UFSHCD is not set
>  # CONFIG_MEMSTICK is not set
>  CONFIG_NEW_LEDS=y
> @@ -3595,6 +3611,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>  # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
>  CONFIG_LEDS_TRIGGER_CPU=y
>  # CONFIG_LEDS_TRIGGER_ACTIVITY is not set
> +# CONFIG_LEDS_TRIGGER_GPIO is not set
>  CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
>  
>  #
> @@ -3644,6 +3661,7 @@ CONFIG_RTC_INTF_DEV=y
>  # CONFIG_RTC_DRV_DS1672 is not set
>  CONFIG_RTC_DRV_HYM8563=y
>  # CONFIG_RTC_DRV_MAX6900 is not set
> +# CONFIG_RTC_DRV_MAX31335 is not set
>  # CONFIG_RTC_DRV_MAX77686 is not set
>  # CONFIG_RTC_DRV_NCT3018Y is not set
>  CONFIG_RTC_DRV_RK808=y
> @@ -3958,7 +3976,6 @@ CONFIG_IMX_REMOTEPROC=y
>  #
>  # Broadcom SoC drivers
>  #
> -# CONFIG_SOC_BRCMSTB is not set
>  # end of Broadcom SoC drivers
>  
>  #
> @@ -3976,10 +3993,8 @@ CONFIG_FSL_GUTS=y
>  #
>  # i.MX SoC drivers
>  #
> -CONFIG_IMX_GPCV2_PM_DOMAINS=y
>  CONFIG_SOC_IMX8M=y
>  # CONFIG_SOC_IMX9 is not set
> -CONFIG_IMX8M_BLK_CTRL=y
>  # end of i.MX SoC drivers
>  
>  #
> @@ -3997,7 +4012,6 @@ CONFIG_IMX8M_BLK_CTRL=y
>  
>  CONFIG_ROCKCHIP_GRF=y
>  CONFIG_ROCKCHIP_IODOMAIN=y
> -CONFIG_ROCKCHIP_PM_DOMAINS=y
>  # CONFIG_SOC_TI is not set
>  
>  #
> @@ -4006,6 +4020,39 @@ CONFIG_ROCKCHIP_PM_DOMAINS=y
>  # end of Xilinx SoC drivers
>  # end of SOC (System On Chip) specific Drivers
>  
> +#
> +# PM Domains
> +#
> +
> +#
> +# Amlogic PM Domains
> +#
> +# end of Amlogic PM Domains
> +
> +# CONFIG_ARM_SCMI_PERF_DOMAIN is not set

This defaults to y, but I have no clue when this is needed.

The rest looks good to me.

Michael

> +CONFIG_ARM_SCMI_POWER_DOMAIN=y
> +CONFIG_ARM_SCPI_POWER_DOMAIN=y
> +
> +#
> +# Broadcom PM Domains
> +#
> +# end of Broadcom PM Domains
> +
> +#
> +# i.MX PM Domains
> +#
> +CONFIG_IMX_GPCV2_PM_DOMAINS=y
> +CONFIG_IMX8M_BLK_CTRL=y
> +# end of i.MX PM Domains
> +
> +#
> +# Qualcomm PM Domains
> +#
> +# end of Qualcomm PM Domains
> +
> +CONFIG_ROCKCHIP_PM_DOMAINS=y
> +# end of PM Domains
> +
>  CONFIG_PM_DEVFREQ=y
>  
>  #
> @@ -4156,6 +4203,7 @@ CONFIG_FSL_IMX8_DDR_PMU=y
>  # CONFIG_ARM_SPE_PMU is not set
>  # CONFIG_HISI_PCIE_PMU is not set
>  # CONFIG_HNS3_PMU is not set
> +# CONFIG_DWC_PCIE_PMU is not set
>  # CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU is not set
>  # end of Performance monitor support
>  
> @@ -4172,6 +4220,7 @@ CONFIG_RAS=y
>  # CONFIG_DAX is not set
>  CONFIG_NVMEM=y
>  CONFIG_NVMEM_SYSFS=y
> +CONFIG_NVMEM_LAYOUTS=y
>  
>  #
>  # Layout Types
> @@ -4233,6 +4282,7 @@ CONFIG_INTERCONNECT_IMX8MP=y
>  CONFIG_DCACHE_WORD_ACCESS=y
>  # CONFIG_VALIDATE_FS_PARSER is not set
>  CONFIG_FS_IOMAP=y
> +CONFIG_FS_STACK=y
>  CONFIG_BUFFER_HEAD=y
>  CONFIG_LEGACY_DIRECT_IO=y
>  # CONFIG_EXT2_FS is not set
> @@ -4253,6 +4303,7 @@ CONFIG_FS_MBCACHE=y
>  # CONFIG_BTRFS_FS is not set
>  # CONFIG_NILFS2_FS is not set
>  # CONFIG_F2FS_FS is not set
> +# CONFIG_BCACHEFS_FS is not set
>  CONFIG_FS_POSIX_ACL=y
>  CONFIG_EXPORTFS=y
>  # CONFIG_EXPORTFS_BLOCK_OPS is not set
> @@ -4392,6 +4443,7 @@ CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
>  # CONFIG_NFS_V4_1_MIGRATION is not set
>  CONFIG_NFS_V4_SECURITY_LABEL=y
>  CONFIG_ROOT_NFS=y
> +# CONFIG_NFS_FSCACHE is not set
>  # CONFIG_NFS_USE_LEGACY_DNS is not set
>  CONFIG_NFS_USE_KERNEL_DNS=y
>  CONFIG_NFS_DISABLE_UDP_SUPPORT=y
> @@ -4598,14 +4650,12 @@ CONFIG_CRYPTO_SM4_GENERIC=m
>  # CONFIG_CRYPTO_ADIANTUM is not set
>  CONFIG_CRYPTO_CHACHA20=y
>  CONFIG_CRYPTO_CBC=y
> -# CONFIG_CRYPTO_CFB is not set
>  CONFIG_CRYPTO_CTR=m
>  # CONFIG_CRYPTO_CTS is not set
>  CONFIG_CRYPTO_ECB=y
>  # CONFIG_CRYPTO_HCTR2 is not set
>  # CONFIG_CRYPTO_KEYWRAP is not set
>  # CONFIG_CRYPTO_LRW is not set
> -# CONFIG_CRYPTO_OFB is not set
>  # CONFIG_CRYPTO_PCBC is not set
>  CONFIG_CRYPTO_XTS=y
>  # end of Length-preserving ciphers and modes
> @@ -4677,7 +4727,9 @@ CONFIG_CRYPTO_DRBG_HMAC=y
>  # CONFIG_CRYPTO_DRBG_CTR is not set
>  CONFIG_CRYPTO_DRBG=y
>  CONFIG_CRYPTO_JITTERENTROPY=y
> -# CONFIG_CRYPTO_JITTERENTROPY_TESTINTERFACE is not set
> +CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
> +CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
> +CONFIG_CRYPTO_JITTERENTROPY_OSR=1
>  # end of Random number generation
>  
>  #
> @@ -4747,6 +4799,7 @@ CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
>  # CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
>  # CONFIG_CRYPTO_DEV_QAT_C62X is not set
>  # CONFIG_CRYPTO_DEV_QAT_4XXX is not set
> +# CONFIG_CRYPTO_DEV_QAT_420XX is not set
>  # CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
>  # CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
>  # CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
> @@ -4846,7 +4899,6 @@ CONFIG_ZSTD_DECOMPRESS=y
>  CONFIG_XZ_DEC=y
>  CONFIG_XZ_DEC_X86=y
>  CONFIG_XZ_DEC_POWERPC=y
> -CONFIG_XZ_DEC_IA64=y
>  CONFIG_XZ_DEC_ARM=y
>  CONFIG_XZ_DEC_ARMTHUMB=y
>  CONFIG_XZ_DEC_SPARC=y
> @@ -4901,6 +4953,7 @@ CONFIG_NLATTR=y
>  CONFIG_CLZ_TAB=y
>  CONFIG_IRQ_POLL=y
>  CONFIG_MPILIB=y
> +CONFIG_DIMLIB=y
>  CONFIG_LIBFDT=y
>  CONFIG_OID_REGISTRY=y
>  CONFIG_HAVE_GENERIC_VDSO=y
> @@ -4909,7 +4962,9 @@ CONFIG_GENERIC_VDSO_TIME_NS=y
>  CONFIG_SG_POOL=y
>  CONFIG_ARCH_STACKWALK=y
>  CONFIG_STACKDEPOT=y
> +CONFIG_STACKDEPOT_MAX_FRAMES=64
>  CONFIG_SBITMAP=y
> +# CONFIG_LWQ_TEST is not set
>  # end of Library routines
>  
>  CONFIG_GENERIC_IOREMAP=y
> @@ -4942,7 +4997,7 @@ CONFIG_DEBUG_MISC=y
>  # Compile-time checks and compiler options
>  #
>  CONFIG_DEBUG_INFO=y
> -CONFIG_AS_HAS_NON_CONST_LEB128=y
> +CONFIG_AS_HAS_NON_CONST_ULEB128=y
>  # CONFIG_DEBUG_INFO_NONE is not set
>  CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
>  # CONFIG_DEBUG_INFO_DWARF4 is not set
> @@ -5107,8 +5162,6 @@ CONFIG_STACKTRACE=y
>  # CONFIG_DEBUG_MAPLE_TREE is not set
>  # end of Debug kernel data structures
>  
> -# CONFIG_DEBUG_CREDENTIALS is not set
> -
>  #
>  # RCU Debugging
>  #
> diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
> index 675874fc4a3c..7653891e537d 100644
> --- a/configs/platform-v8a/platformconfig
> +++ b/configs/platform-v8a/platformconfig
> @@ -121,8 +121,8 @@ PTXCONF_KERNEL_INSTALL=y
>  PTXCONF_KERNEL_MODULES=y
>  PTXCONF_KERNEL_MODULES_INSTALL=y
>  # PTXCONF_KERNEL_MODULES_SIGN is not set
> -PTXCONF_KERNEL_VERSION="6.6"
> -PTXCONF_KERNEL_MD5="452098d80ba925af3a4ab35998f3aef5"
> +PTXCONF_KERNEL_VERSION="6.8"
> +PTXCONF_KERNEL_MD5="72d623b959a11850b57406f0b9fe3946"
>  # PTXCONF_KERNEL_IMAGE_BZ is not set
>  # PTXCONF_KERNEL_IMAGE_Z is not set
>  # PTXCONF_KERNEL_IMAGE_XIP is not set
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



  reply	other threads:[~2024-03-16 11:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-15 21:12 [DistroKit] [PATCH 00/12] update and add STM32MP135F-DK support Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 01/12] ptxdist: migrate 2023.02.0 → 2024.03.0 Ahmad Fatoum
2024-03-16  9:26   ` Alexander Dahl
2024-03-17 19:14     ` Robert Schwebel
2024-03-21  9:37   ` Alexander Dahl
2024-03-25 18:45     ` [DistroKit] [PATCH] blspec-entry: remove superfluous file Roland Hieber
2024-03-25 20:51       ` Robert Schwebel
2024-03-15 21:12 ` [DistroKit] [PATCH 02/12] tf-a: update from v2.8 → v2.10 Ahmad Fatoum
2024-04-24 11:15   ` Alexander Dahl
2024-04-24 11:48     ` Ahmad Fatoum
2024-04-24 11:58       ` Alexander Dahl
2024-03-15 21:12 ` [DistroKit] [PATCH 03/12] v8a: imx8mq-evk: disable PCI nodes Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 04/12] v8a: update kernel from v6.6 → v6.8 Ahmad Fatoum
2024-03-16 11:18   ` Michael Olbrich [this message]
2024-03-16 13:09     ` Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 05/12] v8a: barebox: version bump v2023.12.0 → v2024.03.0 Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 06/12] v7a: update kernel from v6.6 → v6.8 Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 07/12] v7a: barebox: version bump v2024.01.0 → v2024.03.0 Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 08/12] v7a: barebox: enable STM32MP135F-DK support Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 09/12] v7a: build OP-TEE for STM32MP13 Ahmad Fatoum
2024-03-15 21:12 ` [DistroKit] [PATCH 10/12] v7a: stm32mp: add TF-A recipe " Ahmad Fatoum
2024-04-26  8:03   ` Alexander Dahl
2024-03-15 21:12 ` [DistroKit] [PATCH 11/12] v7a: kernel: enable STM32MP135F-DK support Ahmad Fatoum
2024-03-18 13:07   ` Michael Olbrich
2024-03-18 14:23     ` Robert Schwebel
2024-03-15 21:12 ` [DistroKit] [PATCH 12/12] v7a: stm32mp: add image recipe for STM32MP135F-DK Ahmad Fatoum
2024-03-17 19:27 ` [DistroKit] [PATCH 00/12] update and add STM32MP135F-DK support Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZfWABt1c4Ax1UY8D@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox