Hi Rouven, Am 13.12.18 um 08:44 schrieb Rouven Czerwinski: > Add the compatible for the Raspberry Pi AUX UART and an init function which > enables it via the aux register and configures the correct shift value. > > Signed-off-by: Rouven Czerwinski > --- > drivers/serial/serial_ns16550.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c > index 8ddcfdbef..7a4054a67 100644 > --- a/drivers/serial/serial_ns16550.c > +++ b/drivers/serial/serial_ns16550.c > @@ -253,6 +253,20 @@ static void ns16550_jz_init_port(struct console_device *cdev) > ns16550_serial_init_port(cdev); > } > > +static void rpi_init_port(struct console_device *cdev) > +{ > + struct ns16550_priv *priv = to_ns16550_priv(cdev); > + > + writeb(0x01, 0x3f215004); > + priv->plat.shift = 2; > + /* > + * We double the clock rate since the 16550 will divide by 16 > + * (instead of 8 required by the BCM2835 peripheral manual) > + */ > + priv->plat.clock = priv->plat.clock*2; > + ns16550_serial_init_port(cdev); > +} Formatting is broken here, you are using spaces instead of tabs. Probably using checkpatch will show it. > /*********** Exposed Functions **********************************/ > > /** > @@ -353,6 +367,11 @@ static __maybe_unused struct ns16550_drvdata tegra_drvdata = { > .linux_console_name = "ttyS", > }; > > +static struct ns16550_drvdata rpi_drvdata = { > + .init_port = rpi_init_port, > + .linux_console_name = "ttyS", > +}; same here. > static int ns16550_init_iomem(struct device_d *dev, struct ns16550_priv *priv) > { > struct resource *iores; > @@ -527,6 +546,12 @@ static struct of_device_id ns16550_serial_dt_ids[] = { > .compatible = "ingenic,jz4740-uart", > .data = &jz_drvdata, > }, > +#endif > +#if IS_ENABLED(CONFIG_MACH_RPI_COMMON) > + { > + .compatible = "brcm,bcm2835-aux-uart", > + .data = &rpi_drvdata, > + }, > #endif > { > /* sentinel */ > -- Regards, Oleksij