* [PATCH] FIT: Parse `load` and `entry` addresses.
@ 2020-07-13 12:03 Christian Mauderer
2020-07-13 13:36 ` Ahmad Fatoum
0 siblings, 1 reply; 3+ messages in thread
From: Christian Mauderer @ 2020-07-13 12:03 UTC (permalink / raw)
To: barebox
According to the U-Boot documentation for the FIT file format, the load
and entry have to be allways defined for a "kernel" or "standalone".
But Barebox ignored the parameters. That changes with this patch.
For backward compatibility the default address is still used for images
without `load` or `entry`.
---
arch/arm/mach-layerscape/ppa.c | 3 +-
common/bootm.c | 7 ++--
common/image-fit.c | 61 +++++++++++++++++++++++++++++++++-
include/image-fit.h | 3 +-
4 files changed, 68 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-layerscape/ppa.c b/arch/arm/mach-layerscape/ppa.c
index 477e89478..3eb7ab641 100644
--- a/arch/arm/mach-layerscape/ppa.c
+++ b/arch/arm/mach-layerscape/ppa.c
@@ -82,7 +82,8 @@ static int ppa_init(void *ppa, size_t ppa_size, void *sec_firmware_addr)
}
- ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size);
+ ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size,
+ NULL, NULL);
if (ret) {
pr_err("Cannot open firmware image in ppa FIT image: %s\n",
strerror(-ret));
diff --git a/common/bootm.c b/common/bootm.c
index 366f31455..94600cae3 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -222,7 +222,7 @@ int bootm_load_initrd(struct image_data *data, unsigned long load_address)
unsigned long initrd_size;
ret = fit_open_image(data->os_fit, data->fit_config, "ramdisk",
- &initrd, &initrd_size);
+ &initrd, &initrd_size, NULL, NULL);
data->initrd_res = request_sdram_region("initrd",
load_address,
@@ -348,7 +348,7 @@ void *bootm_get_devicetree(struct image_data *data)
unsigned long of_size;
ret = fit_open_image(data->os_fit, data->fit_config, "fdt",
- &of_tree, &of_size);
+ &of_tree, &of_size, NULL, NULL);
if (ret)
return ERR_PTR(ret);
@@ -622,7 +622,8 @@ int bootm_boot(struct bootm_data *bootm_data)
}
ret = fit_open_image(data->os_fit, data->fit_config, "kernel",
- &data->fit_kernel, &data->fit_kernel_size);
+ &data->fit_kernel, &data->fit_kernel_size,
+ &data->os_address, &data->os_entry);
if (ret)
goto err_out;
}
diff --git a/common/image-fit.c b/common/image-fit.c
index 2681d62a9..40ee6d0d8 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -517,12 +517,43 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
return 1;
}
+static int fit_get_address(struct device_node *image, const char *property,
+ unsigned long *addr)
+{
+ int ret = 0;
+ uint64_t value64;
+ uint32_t value32;
+
+ if (sizeof(*addr) == sizeof(value64)) {
+ ret = of_property_read_u64(image, property, &value64);
+ if (ret == 0) {
+ *addr = value64;
+ } else if (ret == -EOVERFLOW) {
+ ret = of_property_read_u32(image, property, &value32);
+ if (ret == 0) {
+ *addr = value32;
+ }
+ }
+ } else if (sizeof(*addr) == sizeof(value32)) {
+ ret = of_property_read_u32(image, property, &value32);
+ if (ret == 0) {
+ *addr = value32;
+ }
+ } else {
+ ret = -ENOTSUPP;
+ }
+
+ return ret;
+}
+
/**
* fit_open_image - Open an image in a FIT image
* @handle: The FIT image handle
* @name: The name of the image to open
* @outdata: The returned image
* @outsize: Size of the returned image
+ * @load: The load address given by the image
+ * @entry: The entry address given by the image
*
* Open an image in a FIT image. The returned image is freed during fit_close().
* @configuration holds the cookie returned from fit_open_configuration() if
@@ -532,11 +563,16 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
* then only the hash is checked (because opening the configuration already
* checks the RSA signature of all involved nodes).
*
+ * The load address and entry point of the image description in the FIT will be
+ * parsed if they exist and if the @load and @entry parameters are not NULL.
+ * Otherwise @load and @entry won't be changed.
+ *
* Return: 0 for success, negative error code otherwise
*/
int fit_open_image(struct fit_handle *handle, void *configuration,
const char *name, const void **outdata,
- unsigned long *outsize)
+ unsigned long *outsize, unsigned long *load,
+ unsigned long *entry)
{
struct device_node *image;
const char *unit, *type = NULL, *desc= "(no description)";
@@ -573,6 +609,29 @@ int fit_open_image(struct fit_handle *handle, void *configuration,
return -EINVAL;
}
+ if (load) {
+ ret = fit_get_address(image, "load", load);
+ if (ret < 0) {
+ pr_info("Couldn't get load address in %s. Use default.\n", image->full_name);
+ ret = 0;
+ } else {
+ pr_info("load: 0x%08lx\n", *load);
+ }
+ }
+
+ if (load && entry) {
+ ret = fit_get_address(image, "entry", entry);
+ if (ret < 0) {
+ pr_info("Couldn't get entry point in %s. Use default.\n", image->full_name);
+ ret = 0;
+ } else {
+ /* Barebox uses an entry relative to load but the FIT
+ * images assume an absolute entry. */
+ *entry -= *load;
+ pr_info("entry: 0x%08lx\n", *entry);
+ }
+ }
+
if (conf_node)
ret = fit_verify_hash(handle, image, data, data_len);
else
diff --git a/include/image-fit.h b/include/image-fit.h
index 27c9e8351..038732d0d 100644
--- a/include/image-fit.h
+++ b/include/image-fit.h
@@ -31,7 +31,8 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
const char *name);
int fit_open_image(struct fit_handle *handle, void *configuration,
const char *name, const void **outdata,
- unsigned long *outsize);
+ unsigned long *outsize, unsigned long *load,
+ unsigned long *entry);
void fit_close(struct fit_handle *handle);
--
2.26.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] FIT: Parse `load` and `entry` addresses.
2020-07-13 12:03 [PATCH] FIT: Parse `load` and `entry` addresses Christian Mauderer
@ 2020-07-13 13:36 ` Ahmad Fatoum
2020-07-13 14:20 ` Christian Mauderer
0 siblings, 1 reply; 3+ messages in thread
From: Ahmad Fatoum @ 2020-07-13 13:36 UTC (permalink / raw)
To: Christian Mauderer, barebox
Hello Christian,
On 7/13/20 2:03 PM, Christian Mauderer wrote:
> According to the U-Boot documentation for the FIT file format, the load
> and entry have to be allways defined for a "kernel" or "standalone".
> But Barebox ignored the parameters. That changes with this patch.
>
> For backward compatibility the default address is still used for images
> without `load` or `entry`.
> ---
> arch/arm/mach-layerscape/ppa.c | 3 +-
> common/bootm.c | 7 ++--
> common/image-fit.c | 61 +++++++++++++++++++++++++++++++++-
> include/image-fit.h | 3 +-
> 4 files changed, 68 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-layerscape/ppa.c b/arch/arm/mach-layerscape/ppa.c
> index 477e89478..3eb7ab641 100644
> --- a/arch/arm/mach-layerscape/ppa.c
> +++ b/arch/arm/mach-layerscape/ppa.c
> @@ -82,7 +82,8 @@ static int ppa_init(void *ppa, size_t ppa_size, void *sec_firmware_addr)
> }
>
>
> - ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size);
> + ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size,
> + NULL, NULL);
> if (ret) {
> pr_err("Cannot open firmware image in ppa FIT image: %s\n",
> strerror(-ret));
> diff --git a/common/bootm.c b/common/bootm.c
> index 366f31455..94600cae3 100644
> --- a/common/bootm.c
> +++ b/common/bootm.c
> @@ -222,7 +222,7 @@ int bootm_load_initrd(struct image_data *data, unsigned long load_address)
> unsigned long initrd_size;
>
> ret = fit_open_image(data->os_fit, data->fit_config, "ramdisk",
> - &initrd, &initrd_size);
> + &initrd, &initrd_size, NULL, NULL);
>
> data->initrd_res = request_sdram_region("initrd",
> load_address,
> @@ -348,7 +348,7 @@ void *bootm_get_devicetree(struct image_data *data)
> unsigned long of_size;
>
> ret = fit_open_image(data->os_fit, data->fit_config, "fdt",
> - &of_tree, &of_size);
> + &of_tree, &of_size, NULL, NULL);
> if (ret)
> return ERR_PTR(ret);
>
> @@ -622,7 +622,8 @@ int bootm_boot(struct bootm_data *bootm_data)
> }
>
> ret = fit_open_image(data->os_fit, data->fit_config, "kernel",
> - &data->fit_kernel, &data->fit_kernel_size);
> + &data->fit_kernel, &data->fit_kernel_size,
> + &data->os_address, &data->os_entry);
> if (ret)
> goto err_out;
> }
> diff --git a/common/image-fit.c b/common/image-fit.c
> index 2681d62a9..40ee6d0d8 100644
> --- a/common/image-fit.c
> +++ b/common/image-fit.c
> @@ -517,12 +517,43 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
> return 1;
> }
>
> +static int fit_get_address(struct device_node *image, const char *property,
> + unsigned long *addr)
> +{
> + int ret = 0;
> + uint64_t value64;
> + uint32_t value32;
> +
> + if (sizeof(*addr) == sizeof(value64)) {
> + ret = of_property_read_u64(image, property, &value64);
> + if (ret == 0) {
> + *addr = value64;
> + } else if (ret == -EOVERFLOW) {
> + ret = of_property_read_u32(image, property, &value32);
> + if (ret == 0) {
> + *addr = value32;
> + }
> + }
> + } else if (sizeof(*addr) == sizeof(value32)) {
> + ret = of_property_read_u32(image, property, &value32);
> + if (ret == 0) {
> + *addr = value32;
> + }
> + } else {
> + ret = -ENOTSUPP;
> + }
> +
> + return ret;
You can make this more concise by calling of_read_number yourself:
const __be32 *cell;
int len = 0;
cell = of_get_property(image, property, &len);
if (!cell)
return -EINVAL;
if (len > sizeof(unsigned long))
return -ENOTSUPP;
*addr = (unsigned long)of_read_number(cell, len / sizeof(*cell));
return 0;
> +}
> +
> /**
> * fit_open_image - Open an image in a FIT image
> * @handle: The FIT image handle
> * @name: The name of the image to open
> * @outdata: The returned image
> * @outsize: Size of the returned image
> + * @load: The load address given by the image
> + * @entry: The entry address given by the image
> *
> * Open an image in a FIT image. The returned image is freed during fit_close().
> * @configuration holds the cookie returned from fit_open_configuration() if
> @@ -532,11 +563,16 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
> * then only the hash is checked (because opening the configuration already
> * checks the RSA signature of all involved nodes).
> *
> + * The load address and entry point of the image description in the FIT will be
> + * parsed if they exist and if the @load and @entry parameters are not NULL.
> + * Otherwise @load and @entry won't be changed.
> + *
> * Return: 0 for success, negative error code otherwise
> */
> int fit_open_image(struct fit_handle *handle, void *configuration,
> const char *name, const void **outdata,
> - unsigned long *outsize)
> + unsigned long *outsize, unsigned long *load,
> + unsigned long *entry)
> {
> struct device_node *image;
> const char *unit, *type = NULL, *desc= "(no description)";
> @@ -573,6 +609,29 @@ int fit_open_image(struct fit_handle *handle, void *configuration,
> return -EINVAL;
> }
>
> + if (load) {
> + ret = fit_get_address(image, "load", load);
> + if (ret < 0) {
> + pr_info("Couldn't get load address in %s. Use default.\n", image->full_name);
> + ret = 0;
> + } else {
> + pr_info("load: 0x%08lx\n", *load);
Fold this pr_info and the next into the already existing one?
That way, we don't print 3 separate lines every time.
> + }
> + }
> +
> + if (load && entry) {
> + ret = fit_get_address(image, "entry", entry);
> + if (ret < 0) {
> + pr_info("Couldn't get entry point in %s. Use default.\n", image->full_name);
> + ret = 0;
> + } else {
> + /* Barebox uses an entry relative to load but the FIT
> + * images assume an absolute entry. */
> + *entry -= *load;
> + pr_info("entry: 0x%08lx\n", *entry);
> + }
> + }
> +
> if (conf_node)
> ret = fit_verify_hash(handle, image, data, data_len);
> else
> diff --git a/include/image-fit.h b/include/image-fit.h
> index 27c9e8351..038732d0d 100644
> --- a/include/image-fit.h
> +++ b/include/image-fit.h
> @@ -31,7 +31,8 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
> const char *name);
> int fit_open_image(struct fit_handle *handle, void *configuration,
> const char *name, const void **outdata,
> - unsigned long *outsize);
> + unsigned long *outsize, unsigned long *load,
> + unsigned long *entry);
>
> void fit_close(struct fit_handle *handle);
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] FIT: Parse `load` and `entry` addresses.
2020-07-13 13:36 ` Ahmad Fatoum
@ 2020-07-13 14:20 ` Christian Mauderer
0 siblings, 0 replies; 3+ messages in thread
From: Christian Mauderer @ 2020-07-13 14:20 UTC (permalink / raw)
To: Ahmad Fatoum, barebox
Hello Ahmad,
thanks for the fast review. I'll make the suggested changes and post a
V2 (most likely) tomorrow.
Best regards
Christian
On 13/07/2020 15:36, Ahmad Fatoum wrote:
> Hello Christian,
>
> On 7/13/20 2:03 PM, Christian Mauderer wrote:
>> According to the U-Boot documentation for the FIT file format, the load
>> and entry have to be allways defined for a "kernel" or "standalone".
>> But Barebox ignored the parameters. That changes with this patch.
>>
>> For backward compatibility the default address is still used for images
>> without `load` or `entry`.
>> ---
>> arch/arm/mach-layerscape/ppa.c | 3 +-
>> common/bootm.c | 7 ++--
>> common/image-fit.c | 61 +++++++++++++++++++++++++++++++++-
>> include/image-fit.h | 3 +-
>> 4 files changed, 68 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-layerscape/ppa.c b/arch/arm/mach-layerscape/ppa.c
>> index 477e89478..3eb7ab641 100644
>> --- a/arch/arm/mach-layerscape/ppa.c
>> +++ b/arch/arm/mach-layerscape/ppa.c
>> @@ -82,7 +82,8 @@ static int ppa_init(void *ppa, size_t ppa_size, void *sec_firmware_addr)
>> }
>>
>>
>> - ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size);
>> + ret = fit_open_image(fit, conf, "firmware", &buf, &firmware_size,
>> + NULL, NULL);
>> if (ret) {
>> pr_err("Cannot open firmware image in ppa FIT image: %s\n",
>> strerror(-ret));
>> diff --git a/common/bootm.c b/common/bootm.c
>> index 366f31455..94600cae3 100644
>> --- a/common/bootm.c
>> +++ b/common/bootm.c
>> @@ -222,7 +222,7 @@ int bootm_load_initrd(struct image_data *data, unsigned long load_address)
>> unsigned long initrd_size;
>>
>> ret = fit_open_image(data->os_fit, data->fit_config, "ramdisk",
>> - &initrd, &initrd_size);
>> + &initrd, &initrd_size, NULL, NULL);
>>
>> data->initrd_res = request_sdram_region("initrd",
>> load_address,
>> @@ -348,7 +348,7 @@ void *bootm_get_devicetree(struct image_data *data)
>> unsigned long of_size;
>>
>> ret = fit_open_image(data->os_fit, data->fit_config, "fdt",
>> - &of_tree, &of_size);
>> + &of_tree, &of_size, NULL, NULL);
>> if (ret)
>> return ERR_PTR(ret);
>>
>> @@ -622,7 +622,8 @@ int bootm_boot(struct bootm_data *bootm_data)
>> }
>>
>> ret = fit_open_image(data->os_fit, data->fit_config, "kernel",
>> - &data->fit_kernel, &data->fit_kernel_size);
>> + &data->fit_kernel, &data->fit_kernel_size,
>> + &data->os_address, &data->os_entry);
>> if (ret)
>> goto err_out;
>> }
>> diff --git a/common/image-fit.c b/common/image-fit.c
>> index 2681d62a9..40ee6d0d8 100644
>> --- a/common/image-fit.c
>> +++ b/common/image-fit.c
>> @@ -517,12 +517,43 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
>> return 1;
>> }
>>
>> +static int fit_get_address(struct device_node *image, const char *property,
>> + unsigned long *addr)
>> +{
>> + int ret = 0;
>> + uint64_t value64;
>> + uint32_t value32;
>> +
>> + if (sizeof(*addr) == sizeof(value64)) {
>> + ret = of_property_read_u64(image, property, &value64);
>> + if (ret == 0) {
>> + *addr = value64;
>> + } else if (ret == -EOVERFLOW) {
>> + ret = of_property_read_u32(image, property, &value32);
>> + if (ret == 0) {
>> + *addr = value32;
>> + }
>> + }
>> + } else if (sizeof(*addr) == sizeof(value32)) {
>> + ret = of_property_read_u32(image, property, &value32);
>> + if (ret == 0) {
>> + *addr = value32;
>> + }
>> + } else {
>> + ret = -ENOTSUPP;
>> + }
>> +
>> + return ret;
>
> You can make this more concise by calling of_read_number yourself:
>
> const __be32 *cell;
> int len = 0;
>
> cell = of_get_property(image, property, &len);
> if (!cell)
> return -EINVAL;
> if (len > sizeof(unsigned long))
> return -ENOTSUPP;
>
> *addr = (unsigned long)of_read_number(cell, len / sizeof(*cell));
> return 0;
>
>> +}
>> +
>> /**
>> * fit_open_image - Open an image in a FIT image
>> * @handle: The FIT image handle
>> * @name: The name of the image to open
>> * @outdata: The returned image
>> * @outsize: Size of the returned image
>> + * @load: The load address given by the image
>> + * @entry: The entry address given by the image
>> *
>> * Open an image in a FIT image. The returned image is freed during fit_close().
>> * @configuration holds the cookie returned from fit_open_configuration() if
>> @@ -532,11 +563,16 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
>> * then only the hash is checked (because opening the configuration already
>> * checks the RSA signature of all involved nodes).
>> *
>> + * The load address and entry point of the image description in the FIT will be
>> + * parsed if they exist and if the @load and @entry parameters are not NULL.
>> + * Otherwise @load and @entry won't be changed.
>> + *
>> * Return: 0 for success, negative error code otherwise
>> */
>> int fit_open_image(struct fit_handle *handle, void *configuration,
>> const char *name, const void **outdata,
>> - unsigned long *outsize)
>> + unsigned long *outsize, unsigned long *load,
>> + unsigned long *entry)
>> {
>> struct device_node *image;
>> const char *unit, *type = NULL, *desc= "(no description)";
>> @@ -573,6 +609,29 @@ int fit_open_image(struct fit_handle *handle, void *configuration,
>> return -EINVAL;
>> }
>>
>> + if (load) {
>> + ret = fit_get_address(image, "load", load);
>> + if (ret < 0) {
>> + pr_info("Couldn't get load address in %s. Use default.\n", image->full_name);
>> + ret = 0;
>> + } else {
>> + pr_info("load: 0x%08lx\n", *load);
>
> Fold this pr_info and the next into the already existing one?
> That way, we don't print 3 separate lines every time.
>
>> + }
>> + }
>> +
>> + if (load && entry) {
>> + ret = fit_get_address(image, "entry", entry);
>> + if (ret < 0) {
>> + pr_info("Couldn't get entry point in %s. Use default.\n", image->full_name);
>> + ret = 0;
>> + } else {
>> + /* Barebox uses an entry relative to load but the FIT
>> + * images assume an absolute entry. */
>> + *entry -= *load;
>> + pr_info("entry: 0x%08lx\n", *entry);
>> + }
>> + }
>> +
>> if (conf_node)
>> ret = fit_verify_hash(handle, image, data, data_len);
>> else
>> diff --git a/include/image-fit.h b/include/image-fit.h
>> index 27c9e8351..038732d0d 100644
>> --- a/include/image-fit.h
>> +++ b/include/image-fit.h
>> @@ -31,7 +31,8 @@ int fit_has_image(struct fit_handle *handle, void *configuration,
>> const char *name);
>> int fit_open_image(struct fit_handle *handle, void *configuration,
>> const char *name, const void **outdata,
>> - unsigned long *outsize);
>> + unsigned long *outsize, unsigned long *load,
>> + unsigned long *entry);
>>
>> void fit_close(struct fit_handle *handle);
>>
>>
>
--
--------------------------------------------
embedded brains GmbH
Herr Christian Mauderer
Dornierstr. 4
D-82178 Puchheim
Germany
email: christian.mauderer@embedded-brains.de
Phone: +49-89-18 94 741 - 18
Fax: +49-89-18 94 741 - 08
PGP: Public key available on request.
Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-13 14:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-13 12:03 [PATCH] FIT: Parse `load` and `entry` addresses Christian Mauderer
2020-07-13 13:36 ` Ahmad Fatoum
2020-07-13 14:20 ` Christian Mauderer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox