From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH v2 1/6] net: add promiscuous mode configuration support
Date: Fri, 4 Nov 2022 09:37:16 +0100 [thread overview]
Message-ID: <0bf2eb6a-5c5a-2456-6080-7092291c524f@pengutronix.de> (raw)
In-Reply-To: <20221103131351.2059683-1-o.rempel@pengutronix.de>
Hello Oleksij,
On 03.11.22 14:13, Oleksij Rempel wrote:
> This configuration is mostly needed for controllers attached to switches
> with different MAC address configurations.
I think all interfaces should have a promisc parameter to be able to
configure this. This can be added in future, but for now it would be
great if ethlog could have an optional parameter to enable promisc
on the interface it's listening at. Should be useful for future
debugging.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> include/net.h | 3 +++
> net/eth.c | 10 ++++++++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/include/net.h b/include/net.h
> index 338033d698..96c2ed1d11 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -49,6 +49,8 @@ struct eth_device {
> int *length);
> void (*rx_monitor) (struct eth_device*, void *packet, int length);
> void (*tx_monitor) (struct eth_device*, void *packet, int length);
> + /* Set promiscuous mode */
> + int (*set_promiscuous_mode) (struct eth_device*, bool enable);
>
> struct eth_device *next;
> void *priv;
> @@ -113,6 +115,7 @@ int eth_send(struct eth_device *edev, void *packet, int length); /* Send a pa
> int eth_rx(void); /* Check for received packets */
> void eth_open_all(void);
> struct eth_device *of_find_eth_device_by_node(struct device_node *np);
> +int eth_set_promiscuous_mode(struct eth_device *edev, bool enable);
>
> /* associate a MAC address to a ethernet device. Should be called by
> * board code for boards which store their MAC address at some unusual
> diff --git a/net/eth.c b/net/eth.c
> index 8f6ff7db3a..ad4b9d5987 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -31,6 +31,16 @@ struct eth_ethaddr {
>
> static LIST_HEAD(ethaddr_list);
>
> +int eth_set_promiscuous_mode(struct eth_device *edev, bool enable)
> +{
> + int ret = 0;
> +
> + if (edev->set_promiscuous_mode)
> + ret = edev->set_promiscuous_mode(edev, enable);
> +
> + return ret;
> +}
> +
> int eth_set_ethaddr(struct eth_device *edev, const char *ethaddr)
> {
> int ret;
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2022-11-04 8:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-03 13:13 Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev Oleksij Rempel
2022-11-04 8:26 ` Sascha Hauer
2022-11-04 8:34 ` Ahmad Fatoum
2022-11-03 13:13 ` [PATCH v2 3/6] drivers: net: fec_imx: add promiscuous mode configuration support Oleksij Rempel
2022-11-04 8:29 ` Sascha Hauer
2022-11-04 8:52 ` Sascha Hauer
2022-11-03 13:13 ` [PATCH v2 4/6] net: dsa: fix of_device_ensure_probed*() for switch ports Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 5/6] ARM: boards: skov-imx6: convert all pr_ to dev_ prints Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 6/6] ARM: boards: skov-imx6: assigned separate MAC address to LAN2 Oleksij Rempel
2022-11-04 8:25 ` [PATCH v2 1/6] net: add promiscuous mode configuration support Sascha Hauer
2022-11-04 8:37 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0bf2eb6a-5c5a-2456-6080-7092291c524f@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox