From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Denis Orlov <denorl2009@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 11/17] MIPS: Makefile: sign-extend TEXT_BASE value on CONFIG_64BIT
Date: Fri, 9 Jun 2023 08:40:07 +0200 [thread overview]
Message-ID: <0f7d75ec-a85c-7b80-7a42-a8b76d138ffe@pengutronix.de> (raw)
In-Reply-To: <CALHb5ujFX=0QUsdeFDNmvoL6W4+79aXwnsn0j4+hnWOVQ6P=aQ@mail.gmail.com>
On 06.06.23 11:23, Denis Orlov wrote:
> On Tue, 6 Jun 2023 at 12:04, Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>>
>> On 05.06.23 22:10, Denis Orlov wrote:
>>> The code that uses TEXT_BASE will fail on reading truncated 32-bit
>>> address if running with 64BIT enabled. As we only support running from
>>> compatibility segments (i.e. no 'proper' 64-bit base addresses), simply
>>> make sure the value is sign-extended when passing it as a define.
>>
>> Below is not really a sign extension. e.g. 0x0000_0000 would be turned
>> into 0xffff_ffff_0000_0000. Is that ok?
>
> Yeah, we can only handle KSEG0/KSEG1 segments, i.e. text base should be
> somewhere in 0x8000_0000/0xa000_0000. So for those, this might be
> considered a sign extension, I guess.
Hmm, ok.
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>
> Regards,
> Denis
>
>>
>>>
>>> Signed-off-by: Denis Orlov <denorl2009@gmail.com>
>>> ---
>>> arch/mips/Makefile | 8 +++++++-
>>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
>>> index bad6e574c4..65a00379ab 100644
>>> --- a/arch/mips/Makefile
>>> +++ b/arch/mips/Makefile
>>> @@ -57,7 +57,13 @@ cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS
>>> cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) -Wa,-mips64r2 -Wa,--trap
>>> cflags-$(CONFIG_CPU_GS232) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) -Wa,-mips32r2 -Wa,--trap
>>>
>>> -KBUILD_CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
>>> +ifdef CONFIG_64BIT
>>> +MIPS_TEXT_BASE = $(subst 0x,0xffffffff,$(CONFIG_TEXT_BASE))
>>> +else
>>> +MIPS_TEXT_BASE = $(CONFIG_TEXT_BASE)
>>> +endif
>>> +
>>> +KBUILD_CPPFLAGS += -DTEXT_BASE=$(MIPS_TEXT_BASE)
>>>
>>> ifndef CONFIG_MODULES
>>> # Add cleanup flags
>>
>> --
>> Pengutronix e.K. | |
>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-06-09 6:41 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 20:10 [PATCH 00/17] MIPS: fix and improve 64BIT support Denis Orlov
2023-06-05 20:10 ` [PATCH 01/17] MIPS: malta: allow to choose MIPS64 target CPU in config Denis Orlov
2023-06-06 8:06 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 02/17] MIPS: malta: use CKSEG instead of KSEG macros Denis Orlov
2023-06-06 8:03 ` Ahmad Fatoum
2023-06-06 9:14 ` Denis Orlov
2023-06-05 20:10 ` [PATCH 03/17] MIPS: reloc: fix relocation with CONFIG_64BIT enabled Denis Orlov
2023-06-06 8:08 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 04/17] MIPS: o32: provide ta0..ta3 register definitions Denis Orlov
2023-06-06 8:13 ` Ahmad Fatoum
2023-06-06 9:38 ` Denis Orlov
2023-06-05 20:10 ` [PATCH 05/17] MIPS: pbl: use o32/n64 compatible " Denis Orlov
2023-06-06 8:20 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 06/17] MIPS: pbl: fix linking errors with CONFIG_64BIT Denis Orlov
2023-06-05 20:10 ` [PATCH 07/17] MIPS: use MIPS32/MIPS64 generic instruction macros Denis Orlov
2023-06-06 8:23 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 08/17] MIPS: malta: fix GT64120 base virtual address on 64BIT Denis Orlov
2023-06-06 8:35 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 09/17] MIPS: fix addresses of exception vectors in 64-bit mode Denis Orlov
2023-06-06 8:36 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 10/17] MIPS: fix *ADDR macro usage warnings on CONFIG_64BIT Denis Orlov
2023-06-05 20:10 ` [PATCH 11/17] MIPS: Makefile: sign-extend TEXT_BASE value " Denis Orlov
2023-06-06 9:04 ` Ahmad Fatoum
2023-06-06 9:23 ` Denis Orlov
2023-06-09 6:40 ` Ahmad Fatoum [this message]
2023-06-05 20:10 ` [PATCH 12/17] MIPS: enable 64-bit kernel segment addressing " Denis Orlov
2023-06-06 9:06 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 13/17] MIPS: traps: fix passing wrong sp when returning from exception Denis Orlov
2023-06-05 20:10 ` [PATCH 14/17] MIPS: pbl_macros: use generic load/store macros in copy_to_link_location Denis Orlov
2023-06-06 9:07 ` Ahmad Fatoum
2023-06-05 20:10 ` [PATCH 15/17] MIPS: add 64-bit support for optimized string functions Denis Orlov
2023-06-05 20:10 ` [PATCH 16/17] MIPS: make setjmp/longjmp/initjmp available in 64BIT builds Denis Orlov
2023-06-05 20:10 ` [PATCH 17/17] MIPS: main_entry-pbl: fix conversion warnings on CONFIG_64BIT Denis Orlov
2023-06-06 8:02 ` [PATCH 00/17] MIPS: fix and improve 64BIT support Ahmad Fatoum
2023-06-06 8:43 ` Denis Orlov
2023-06-09 6:43 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0f7d75ec-a85c-7b80-7a42-a8b76d138ffe@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=denorl2009@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox