From: "Clément Leger" <cleger@kalray.eu>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH] Marvell: implement marvell_of_reg_init
Date: Tue, 10 Oct 2017 14:38:19 +0200 (CEST) [thread overview]
Message-ID: <118967021.61066184.1507639099296.JavaMail.zimbra@kalray.eu> (raw)
From ed1cbcd05d5efeb4012d77a9a4ab9c1da0449bdc Mon Sep 17 00:00:00 2001
From: Clement Leger <clement.leger@kalray.eu>
Date: Tue, 10 Oct 2017 14:29:49 +0200
Subject: [PATCH] Marvell: implement marvell_of_reg_init
Implement marvell_of_reg_init in order to use marvell,reg-init property
from device-tree. The code is taken from Linux kernel and slighlty
modify to fit barebox structures.
---
drivers/net/phy/marvell.c | 73 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 69 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index ea5a4a9..73d6453 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -175,13 +175,78 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
};
/*
- * This same function in the Linux kernel parses the marvell,reg-init dt
- * property and does the necessary register writes. It's kept as an exercise for
- * a future user to implement this. :-)
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
*/
static int marvell_of_reg_init(struct phy_device *phydev)
{
- return 0;
+ const __be32 *paddr;
+ int len, i, saved_page, current_page, page_changed, ret;
+
+ if (!phydev->dev.device_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.device_node,
+ "marvell,reg-init", &len);
+ if (!paddr || len < (4 * sizeof(*paddr)))
+ return 0;
+
+ saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+ if (saved_page < 0)
+ return saved_page;
+ page_changed = 0;
+ current_page = saved_page;
+
+ ret = 0;
+ len /= sizeof(*paddr);
+ for (i = 0; i < len - 3; i += 4) {
+ u16 reg_page = be32_to_cpup(paddr + i);
+ u16 reg = be32_to_cpup(paddr + i + 1);
+ u16 mask = be32_to_cpup(paddr + i + 2);
+ u16 val_bits = be32_to_cpup(paddr + i + 3);
+ int val;
+
+ if (reg_page != current_page) {
+ current_page = reg_page;
+ page_changed = 1;
+ ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+ if (ret < 0)
+ goto err;
+ }
+
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, reg);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, reg, val);
+ if (ret < 0)
+ goto err;
+
+ }
+err:
+ if (page_changed) {
+ i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+ if (ret == 0)
+ ret = i;
+ }
+ return ret;
}
static int m88e1121_config_aneg(struct phy_device *phydev)
--
1.8.3.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2017-10-10 12:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 12:38 Clément Leger [this message]
2017-10-16 7:37 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=118967021.61066184.1507639099296.JavaMail.zimbra@kalray.eu \
--to=cleger@kalray.eu \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox