From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from vsmx009.vodafonemail.xion.oxcs.net ([153.92.174.87]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1dxuSk-0001BO-Vu for barebox@lists.infradead.org; Fri, 29 Sep 2017 12:32:39 +0000 Date: Fri, 29 Sep 2017 14:31:40 +0200 (CEST) From: Giorgio Dal Molin Message-ID: <1240553302.113348.1506688301119@mail.vodafone.de> In-Reply-To: <20170929113543.p2unhzcdk4knwpvx@pengutronix.de> References: <1043852685.129432.1506673503086@mail.vodafone.de> <20170929113543.p2unhzcdk4knwpvx@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: how to persistently save config values To: Sascha Hauer Cc: barebox@lists.infradead.org Hi Sascha, thank you for the answer. I just experimented a bit with the environment and the nv vars and I think I'll go this way. I was a bit surprised by the saveenv command though: my understanding of the (default) environment was that it was a read only blob hardcoded in the barebox image; I thought if I want some new/dynamic env content to be saved for the next reboot I have to explicitly provide a storage disk/cf/mtd partition to the saveenv and then to the loadenv. Instead, just saying 'saveenv' saves the contents of '/env' 'somewhere' from where it can be restored on next reboot (very good!). Together with the nv vars and the 'nv.dev.' prefix this just does the trick for me. Thank you. giorgio > On September 29, 2017 at 1:35 PM Sascha Hauer wrote: > > On Fri, Sep 29, 2017 at 10:25:03AM +0200, Giorgio Dal Molin wrote: > > Hi, > > > > I'm working on a new project with an embedded system based on > > a standard intel PC. > > > > I already have a barebox.efi running on the system; my problem is now > > how to permanently save some variables so that, on restart, they can be > > automatically restored by my '/env/bin/init' script. > > The variables I mean are for example 'eth0.ipaddr' or 'eth0.serveraddr'. > > A solution I used in the past was a custom 'env_dump' command that generated > > a config text file like: > > > > eth0.ipaddr=10.0.0.15 > > eth0.serveraddr=10.0.0.1 > > (should be eth0.serverip) > > ... > > > > Then I saved the file with 'saveenv' and restored it back with 'loadenv'. > > Normally you should edit /env/network/eth0 to change the network config. > > Also there is the possibility to create a nv variable that automatically > mirrors to the device variable. In this case it would be > nv.dev.eth0.ipaddr and nv.dev.eth0.serverip. This doesn't work with dhcp > though. > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox