* barebox Patches @ 2009-12-18 15:47 Sascha Hauer 2009-12-18 15:47 ` [PATCH 01/36] i.MX25 3stack: fixup flash header to new names/layout Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Hi all, With the following series barebox compiles all defconfigs except m68k without errors. M68K seems fundamentally broken, so I haven't touched it yet. Sascha _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 01/36] i.MX25 3stack: fixup flash header to new names/layout 2009-12-18 15:47 barebox Patches Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 02/36] ipe337: add missing include Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- board/freescale-mx25-3-stack/3stack.c | 38 +++++++++++++++----------------- 1 files changed, 18 insertions(+), 20 deletions(-) diff --git a/board/freescale-mx25-3-stack/3stack.c b/board/freescale-mx25-3-stack/3stack.c index 3a528fa..5590e55 100644 --- a/board/freescale-mx25-3-stack/3stack.c +++ b/board/freescale-mx25-3-stack/3stack.c @@ -34,7 +34,7 @@ #include <mach/imx-nand.h> #include <fec.h> #include <nand.h> -#include <mach/imx25-flash-header.h> +#include <mach/imx-flash-header.h> #include <mach/iomux-mx25.h> extern unsigned long _stext; @@ -44,43 +44,41 @@ void __naked __flash_header_start go(void) __asm__ __volatile__("b _start\n"); } -struct mx25_dcd_entry __dcd_entry dcd_entry[] = { +struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = { { .ptr_type = 4, .addr = 0xb8002050, .val = 0x0000d843, }, { .ptr_type = 4, .addr = 0xb8002054, .val = 0x22252521, }, { .ptr_type = 4, .addr = 0xb8002058, .val = 0x22220a00, }, { .ptr_type = 4, .addr = 0xb8001010, .val = 0x00000004, }, { .ptr_type = 4, .addr = 0xb8001000, .val = 0x92100000, }, - { .ptr_type = 1, .addr = 0x80000400, .val = 0x12344321, }, + { .ptr_type = 1, .addr = 0x80000400, .val = 0x21, }, { .ptr_type = 4, .addr = 0xb8001000, .val = 0xa2100000, }, { .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, }, { .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, }, { .ptr_type = 4, .addr = 0xb8001000, .val = 0xb2100000, }, - { .ptr_type = 1, .addr = 0x80000033, .val = 0x000000da, }, - { .ptr_type = 1, .addr = 0x81000000, .val = 0x000000ff, }, + { .ptr_type = 1, .addr = 0x80000033, .val = 0xda, }, + { .ptr_type = 1, .addr = 0x81000000, .val = 0xff, }, { .ptr_type = 4, .addr = 0xb8001000, .val = 0x82216880, }, { .ptr_type = 4, .addr = 0xb8001004, .val = 0x00295729, }, { .ptr_type = 4, .addr = 0x53f80008, .val = 0x20034000, }, }; -struct mx25_nand_flash_header __flash_header mx25_3ds_header = { - .flash_header = { - .app_code_jump_vector = &_stext, - .app_code_barker = APP_CODE_BARKER, - .app_code_csf = NULL, - .dcd_ptr_ptr = &mx25_3ds_header.flash_header.dcd, - .super_root_key = NULL, - .dcd = &mx25_3ds_header.dcd_header, - .app_dest = (void *)TEXT_BASE, - }, - .dcd_header = { - .barker = DCD_BARKER, - .block_len = sizeof (dcd_entry), - }, +#define APP_DEST 0x80000000 + +struct imx_flash_header __flash_header_0x400 mx25_3ds_header = { + .app_code_jump_vector = APP_DEST + 0x1000, + .app_code_barker = APP_CODE_BARKER, + .app_code_csf = 0, + .dcd_ptr_ptr = APP_DEST + 0x400 + offsetof(struct imx_flash_header, dcd), + .super_root_key = 0, + .dcd = APP_DEST + 0x400 + offsetof(struct imx_flash_header, dcd_barker), + .app_dest = APP_DEST, + .dcd_barker = DCD_BARKER, + .dcd_block_len = sizeof (dcd_entry), }; extern unsigned long __bss_start; -unsigned long __image_len barebox_len = 0x40000; +unsigned long __image_len_0x400 barebox_len = 0x40000; static struct fec_platform_data fec_info = { .xcv_type = RMII, -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 02/36] ipe337: add missing include 2009-12-18 15:47 ` [PATCH 01/36] i.MX25 3stack: fixup flash header to new names/layout Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 03/36] scb9328: setup chipselect the correct way Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- board/ipe337/ipe337.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/board/ipe337/ipe337.c b/board/ipe337/ipe337.c index c9416fe..269e774 100644 --- a/board/ipe337/ipe337.c +++ b/board/ipe337/ipe337.c @@ -3,6 +3,7 @@ #include <driver.h> #include <asm/cpu/cdefBF561.h> #include <partition.h> +#include <fs.h> static struct device_d cfi_dev = { .name = "cfi_flash", -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 03/36] scb9328: setup chipselect the correct way 2009-12-18 15:47 ` [PATCH 02/36] ipe337: add missing include Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 04/36] read_key: Use ARRAY_SIZE instead of hardcoded value Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- board/scb9328/scb9328.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 6b86352..356c4b8 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -67,9 +67,7 @@ static struct device_d dm9000_dev = { static int scb9328_devices_init(void) { - /* adjust chipselects */ - GPR(0) = 0x00800000; - GIUS(0) = 0x0043fffe; + imx_gpio_mode(PA23_PF_CS5); /* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */ FMCR = 0x1; -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 04/36] read_key: Use ARRAY_SIZE instead of hardcoded value 2009-12-18 15:47 ` [PATCH 03/36] scb9328: setup chipselect the correct way Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 05/36] Remove unnecessary casts in key defines Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- lib/readkey.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/lib/readkey.c b/lib/readkey.c index 5937fd0..0464ce4 100644 --- a/lib/readkey.c +++ b/lib/readkey.c @@ -70,7 +70,7 @@ char read_key(void) } } esc[i] = 0; - for (i = 0; i < 18; i++){ + for (i = 0; i < ARRAY_SIZE(esccmds); i++){ if (!strcmp(esc, esccmds[i].seq)) return esccmds[i].val; } -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 05/36] Remove unnecessary casts in key defines 2009-12-18 15:47 ` [PATCH 04/36] read_key: Use ARRAY_SIZE instead of hardcoded value Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 06/36] replace // style comments Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- commands/edit.c | 2 +- include/readkey.h | 12 ++++++------ lib/readkey.c | 2 +- lib/readline.c | 6 +++--- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/commands/edit.c b/commands/edit.c index 6503edf..d292a52 100644 --- a/commands/edit.c +++ b/commands/edit.c @@ -394,7 +394,7 @@ static int do_edit(cmd_tbl_t * cmdtp, int argc, char *argv[]) int lastscrcol; int i; int linepos; - char c; + int c; if (argc != 2) return COMMAND_ERROR_USAGE; diff --git a/include/readkey.h b/include/readkey.h index d27f0b4..d073e43 100644 --- a/include/readkey.h +++ b/include/readkey.h @@ -14,15 +14,15 @@ #define KEY_ERASE_LINE CTL_CH('x') #define KEY_INSERT CTL_CH('o') #define KEY_CLEAR_SCREEN CTL_CH('l') -#define KEY_DEL7 (char)127 -#define KEY_END (char)133 // Cursor Key End -#define KEY_PAGEUP (char)135 // Cursor Key Page Up -#define KEY_PAGEDOWN (char)136 // Cursor Key Page Down -#define KEY_DEL (char)137 // Cursor Key Del +#define KEY_DEL7 127 +#define KEY_END 133 // Cursor Key End +#define KEY_PAGEUP 135 // Cursor Key Page Up +#define KEY_PAGEDOWN 136 // Cursor Key Page Down +#define KEY_DEL 137 // Cursor Key Del #define ANSI_CLEAR_SCREEN "\e[2J\e[;H" -char read_key(void); +int read_key(void); #endif /* READKEY_H */ diff --git a/lib/readkey.c b/lib/readkey.c index 0464ce4..a42d1cb 100644 --- a/lib/readkey.c +++ b/lib/readkey.c @@ -52,7 +52,7 @@ static const struct esc_cmds esccmds[] = { {"[6~", KEY_PAGEDOWN},// Cursor Key Page Down }; -char read_key(void) +int read_key(void) { char c; char esc[5]; diff --git a/lib/readline.c b/lib/readline.c index 750da3b..b82150e 100644 --- a/lib/readline.c +++ b/lib/readline.c @@ -17,8 +17,8 @@ #define MAX_CMDBUF_SIZE 256 #define CTL_BACKSPACE ('\b') -#define DEL ((char)255) -#define DEL7 ((char)127) +#define DEL 255 +#define DEL7 127 #define CREAD_HIST_CHAR ('!') #define getcmd_putch(ch) putchar(ch) @@ -178,7 +178,7 @@ int readline(const char *prompt, char *buf, int len) unsigned long eol_num = 0; unsigned long rlen; unsigned long wlen; - unsigned char ichar; + int ichar; int insert = 1; int rc = 0; #ifdef CONFIG_AUTO_COMPLETE -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 06/36] replace // style comments 2009-12-18 15:47 ` [PATCH 05/36] Remove unnecessary casts in key defines Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 07/36] netx: enable second ethernet device Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- include/readkey.h | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/readkey.h b/include/readkey.h index d073e43..919af64 100644 --- a/include/readkey.h +++ b/include/readkey.h @@ -3,22 +3,22 @@ #define CTL_CH(c) ((c) - 'a' + 1) -// Misc. non-Ascii keys -#define KEY_UP CTL_CH('p') // cursor key Up -#define KEY_DOWN CTL_CH('n') // cursor key Down -#define KEY_RIGHT CTL_CH('f') // Cursor Key Right -#define KEY_LEFT CTL_CH('b') // cursor key Left -#define KEY_HOME CTL_CH('a') // Cursor Key Home +/* Misc. non-Ascii keys */ +#define KEY_UP CTL_CH('p') /* cursor key Up */ +#define KEY_DOWN CTL_CH('n') /* cursor key Down */ +#define KEY_RIGHT CTL_CH('f') /* Cursor Key Right */ +#define KEY_LEFT CTL_CH('b') /* cursor key Left */ +#define KEY_HOME CTL_CH('a') /* Cursor Key Home */ #define KEY_ERASE_TO_EOL CTL_CH('k') #define KEY_REFRESH_TO_EOL CTL_CH('e') #define KEY_ERASE_LINE CTL_CH('x') #define KEY_INSERT CTL_CH('o') #define KEY_CLEAR_SCREEN CTL_CH('l') #define KEY_DEL7 127 -#define KEY_END 133 // Cursor Key End -#define KEY_PAGEUP 135 // Cursor Key Page Up -#define KEY_PAGEDOWN 136 // Cursor Key Page Down -#define KEY_DEL 137 // Cursor Key Del +#define KEY_END 133 /* Cursor Key End */ +#define KEY_PAGEUP 135 /* Cursor Key Page Up */ +#define KEY_PAGEDOWN 136 /* Cursor Key Page Down */ +#define KEY_DEL 137 /* Cursor Key Del */ #define ANSI_CLEAR_SCREEN "\e[2J\e[;H" -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 07/36] netx: enable second ethernet device 2009-12-18 15:47 ` [PATCH 06/36] replace // style comments Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 08/36] pcm037: Add missing include Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- board/netx/netx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/netx/netx.c b/board/netx/netx.c index 5276d59..f187820 100644 --- a/board/netx/netx.c +++ b/board/netx/netx.c @@ -71,7 +71,7 @@ static int netx_devices_init(void) { register_device(&cfi_dev); register_device(&sdram_dev); register_device(&netx_eth_dev0); -// register_device(&netx_eth_dev1); + register_device(&netx_eth_dev1); devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0"); -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 08/36] pcm037: Add missing include 2009-12-18 15:47 ` [PATCH 07/36] netx: enable second ethernet device Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 09/36] imx ipu fb: Make fb_videomode const Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- board/pcm037/pcm037.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/board/pcm037/pcm037.c b/board/pcm037/pcm037.c index 8a15da4..aee40c6 100644 --- a/board/pcm037/pcm037.c +++ b/board/pcm037/pcm037.c @@ -25,6 +25,7 @@ #include <common.h> #include <init.h> #include <driver.h> +#include <fs.h> #include <environment.h> #include <usb/isp1504.h> #include <mach/imx-regs.h> -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 09/36] imx ipu fb: Make fb_videomode const 2009-12-18 15:47 ` [PATCH 08/36] pcm037: Add missing include Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:47 ` [PATCH 10/36] i.MX nand: mx21 has a v1 type controller Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-imx/include/mach/imx-ipu-fb.h | 2 +- board/pcm043/pcm043.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/include/mach/imx-ipu-fb.h b/arch/arm/mach-imx/include/mach/imx-ipu-fb.h index c0cc883..53c6d26 100644 --- a/arch/arm/mach-imx/include/mach/imx-ipu-fb.h +++ b/arch/arm/mach-imx/include/mach/imx-ipu-fb.h @@ -25,7 +25,7 @@ * struct mx3fb_platform_data - mx3fb platform data */ struct imx_ipu_fb_platform_data { - struct fb_videomode *mode; + const struct fb_videomode *mode; unsigned char bpp; void __iomem *framebuffer; }; diff --git a/board/pcm043/pcm043.c b/board/pcm043/pcm043.c index d93ef80..0e7f6d3 100644 --- a/board/pcm043/pcm043.c +++ b/board/pcm043/pcm043.c @@ -113,7 +113,7 @@ static const struct fb_videomode pcm043_fb_mode = { .flag = 0, }; #else -static struct fb_videomode pcm043_fb_mode = { +static const struct fb_videomode pcm043_fb_mode = { /* 240x320 @ 60 Hz */ .name = "TX090", .refresh = 60, -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 10/36] i.MX nand: mx21 has a v1 type controller 2009-12-18 15:47 ` [PATCH 09/36] imx ipu fb: Make fb_videomode const Sascha Hauer @ 2009-12-18 15:47 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 11/36] vsprintf: Only define PAGE_SIZE if not already defined Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:47 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/nand/nand_imx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/nand/nand_imx.c b/drivers/nand/nand_imx.c index 5fe288f..5811e27 100644 --- a/drivers/nand/nand_imx.c +++ b/drivers/nand/nand_imx.c @@ -32,7 +32,7 @@ #define DVR_VER "2.0" -#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) +#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx21()) #define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27()) /* -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 11/36] vsprintf: Only define PAGE_SIZE if not already defined 2009-12-18 15:47 ` [PATCH 10/36] i.MX nand: mx21 has a v1 type controller Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 12/36] i2c: Add a no-op i2c_register_board_info if i2c is disabled Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- lib/vsprintf.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index b04694f..6008305 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -206,7 +206,9 @@ static char *number(char *buf, char *end, unsigned long long num, int base, int return buf; } +#ifndef PAGE_SIZE #define PAGE_SIZE 4096 +#endif static char *string(char *buf, char *end, char *s, int field_width, int precision, int flags) { -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 12/36] i2c: Add a no-op i2c_register_board_info if i2c is disabled 2009-12-18 15:48 ` [PATCH 11/36] vsprintf: Only define PAGE_SIZE if not already defined Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 13/36] sandbox: update defconfig Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- include/i2c/i2c.h | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/include/i2c/i2c.h b/include/i2c/i2c.h index 991dd5b..3e9d2b4 100644 --- a/include/i2c/i2c.h +++ b/include/i2c/i2c.h @@ -110,7 +110,15 @@ struct i2c_board_info { #define I2C_BOARD_INFO(dev_type, dev_addr) \ .type = dev_type, .addr = (dev_addr) +#ifdef CONFIG_I2C extern int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n); +#else +static inline int i2c_register_board_info(int busnum, + struct i2c_board_info const *info, unsigned n) +{ + return 0; +} +#endif extern int i2c_add_numbered_adapter(struct i2c_adapter *adapter); extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 13/36] sandbox: update defconfig 2009-12-18 15:48 ` [PATCH 12/36] i2c: Add a no-op i2c_register_board_info if i2c is disabled Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 14/36] pcm030: Update defconfig Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/sandbox/configs/sandbox_defconfig | 9 ++------- 1 files changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/sandbox/configs/sandbox_defconfig b/arch/sandbox/configs/sandbox_defconfig index 8757fd0..adcb07e 100644 --- a/arch/sandbox/configs/sandbox_defconfig +++ b/arch/sandbox/configs/sandbox_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # barebox version: 2.0.0-rc10 -# Mon Oct 12 14:15:55 2009 +# Fri Dec 18 11:53:08 2009 # CONFIG_ARCH_TEXT_BASE=0x00000000 CONFIG_BOARDINFO="sandbox" @@ -114,10 +114,8 @@ CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y @@ -143,6 +141,7 @@ CONFIG_DRIVER_NET_TAP=y # SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # # flash drivers @@ -152,10 +151,6 @@ CONFIG_DRIVER_NET_TAP=y # CONFIG_NAND is not set # CONFIG_USB is not set # CONFIG_USB_GADGET is not set - -# -# Video drivers -# # CONFIG_VIDEO is not set # -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 14/36] pcm030: Update defconfig 2009-12-18 15:48 ` [PATCH 13/36] sandbox: update defconfig Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 15/36] mx21ads: update defconfig Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/ppc/configs/pcm030_defconfig | 27 +++++++++++++++++++-------- 1 files changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/ppc/configs/pcm030_defconfig b/arch/ppc/configs/pcm030_defconfig index a03e7aa..efdfb52 100644 --- a/arch/ppc/configs/pcm030_defconfig +++ b/arch/ppc/configs/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Thu Jul 3 09:49:23 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:53:12 2009 # CONFIG_BOARDINFO="Phytec Phycore mpc5200b tiny" CONFIG_ARCH_TEXT_BASE=0x01000000 @@ -28,6 +28,7 @@ CONFIG_CMD_MEMORY=y # # General Settings # +CONFIG_LOCALVERSION_AUTO=y # # memory layout @@ -44,8 +45,6 @@ CONFIG_MALLOC_SIZE=0x400000 # CONFIG_RELOCATABLE is not set CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 -CONFIG_CMDLINE_EDITING=y -CONFIG_AUTO_COMPLETE=y CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 @@ -53,9 +52,12 @@ CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set CONFIG_GLOB=y CONFIG_PROMPT_HUSH_PS2="> " +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_ERRNO_MESSAGES=y CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y CONFIG_EARLY_CONSOLE_BAUDRATE=115200 CONFIG_OF_FLAT_TREE=y @@ -83,8 +85,9 @@ CONFIG_CMD_SLEEP=y # CONFIG_CMD_LOADENV is not set # CONFIG_CMD_EXPORT is not set # CONFIG_CMD_PRINTENV is not set -CONFIG_CMD_HELP=y # CONFIG_CMD_READLINE is not set +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # # file commands @@ -118,7 +121,6 @@ CONFIG_CMD_MEMINFO=y # flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # # booting @@ -133,11 +135,12 @@ CONFIG_CMD_GO=y # CONFIG_CMD_PARTITION is not set CONFIG_CMD_TEST=y # CONFIG_CMD_REGINFO is not set +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y @@ -157,6 +160,7 @@ CONFIG_MIIPHY=y # Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_MPC5200=y # @@ -164,6 +168,7 @@ CONFIG_DRIVER_NET_MPC5200=y # CONFIG_SPI=y # CONFIG_DRIVER_SPI_MC13783 is not set +# CONFIG_I2C is not set # # flash drivers @@ -174,11 +179,17 @@ CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_OLD=y # CONFIG_CFI_BUFFER_WRITE is not set # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # # Filesystem support # CONFIG_FS_CRAMFS=y +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y CONFIG_ZLIB=y CONFIG_BZLIB=y CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 15/36] mx21ads: update defconfig 2009-12-18 15:48 ` [PATCH 14/36] pcm030: Update defconfig Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 16/36] pcm037: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/mx21ads_defconfig | 105 ++++++++++++++++++++++-------------- 1 files changed, 64 insertions(+), 41 deletions(-) diff --git a/arch/arm/configs/mx21ads_defconfig b/arch/arm/configs/mx21ads_defconfig index 6589ca8..99a8714 100644 --- a/arch/arm/configs/mx21ads_defconfig +++ b/arch/arm/configs/mx21ads_defconfig @@ -1,60 +1,78 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc8 -# Tue Apr 28 08:40:15 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:48:02 2009 # -CONFIG_ARCH_TEXT_BASE=0xc0000000 -CONFIG_BOARDINFO="Freescale i.MX21 ADS" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -CONFIG_MACH_IMX21ADS=y -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set -# CONFIG_MACH_PCA100 is not set # -# Board specific settings +# System Type # +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0xc0000000 +CONFIG_BOARDINFO="Freescale i.MX21 ADS" + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set CONFIG_ARCH_IMX21=y +# CONFIG_ARCH_IMX25 is not set +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +CONFIG_MACH_IMX21ADS=y + +# +# Board specific settings +# # -# i.MX specific settings +# i.MX specific settings # CONFIG_IMX_CLKO=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0xc1000000 @@ -89,7 +107,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/imx21ads/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -97,11 +115,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/imx21ads/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -114,7 +132,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -128,13 +146,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -143,18 +161,19 @@ CONFIG_CMD_MTEST=y CONFIG_CMD_MTEST_ALTERNATIVE=y # -# flash +# flash # CONFIG_CMD_FLASH=y -CONFIG_CMD_NAND=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -163,39 +182,41 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set CONFIG_NET_NFS=y CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_HAS_CS8900=y # -# Network drivers +# Network drivers # CONFIG_DRIVER_NET_CS8900=y # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y @@ -214,9 +235,11 @@ CONFIG_NAND_IMX=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 16/36] pcm037: update defconfig 2009-12-18 15:48 ` [PATCH 15/36] mx21ads: update defconfig Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 17/36] pca100: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/pcm037_defconfig | 123 ++++++++++++++++++++++++++----------- 1 files changed, 88 insertions(+), 35 deletions(-) diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig index b4fb2d9..e82733f 100644 --- a/arch/arm/configs/pcm037_defconfig +++ b/arch/arm/configs/pcm037_defconfig @@ -1,43 +1,80 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Thu Jul 3 09:29:45 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:49:38 2009 # -CONFIG_ARCH_TEXT_BASE=0x87f00000 -CONFIG_BOARDINFO="Phytec phyCORE-i.MX31" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x87f00000 +CONFIG_BOARDINFO="Phytec phyCORE-i.MX31" + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set +# CONFIG_ARCH_IMX27 is not set CONFIG_ARCH_IMX31=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set +# CONFIG_ARCH_IMX35 is not set CONFIG_MACH_PCM037=y -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set # -# Arm specific settings +# Board specific settings +# +CONFIG_PCM037_SDRAM_BANK0_128MB=y +# CONFIG_PCM037_SDRAM_BANK0_256MB is not set +CONFIG_PCM037_SDRAM_BANK1_NONE=y +# CONFIG_PCM037_SDRAM_BANK1_128MB is not set +# CONFIG_PCM037_SDRAM_BANK1_256MB is not set + +# +# i.MX specific settings +# +# CONFIG_AEABI is not set + +# +# Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # +CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x87f00000 @@ -48,10 +85,10 @@ CONFIG_STACK_SIZE=0x8000 CONFIG_MALLOC_SIZE=0x400000 # CONFIG_BROKEN is not set # CONFIG_EXPERIMENTAL is not set +CONFIG_MACH_HAS_LOWLEVEL_INIT=y +CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 -CONFIG_CMDLINE_EDITING=y -CONFIG_AUTO_COMPLETE=y CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 @@ -59,9 +96,12 @@ CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set CONFIG_GLOB=y CONFIG_PROMPT_HUSH_PS2="> " +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_ERRNO_MESSAGES=y CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set CONFIG_PARTITION=y @@ -69,7 +109,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm037/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -77,11 +117,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm037/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -89,11 +129,12 @@ CONFIG_CMD_SAVEENV=y CONFIG_CMD_LOADENV=y CONFIG_CMD_EXPORT=y CONFIG_CMD_PRINTENV=y -CONFIG_CMD_HELP=y CONFIG_CMD_READLINE=y +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -107,13 +148,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -121,67 +162,79 @@ CONFIG_CMD_CRC=y # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_PARTITION=y CONFIG_CMD_TEST=y +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # CONFIG_DRIVER_NET_SMC911X=y CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT=0 +# CONFIG_DRIVER_NET_SMC91111 is not set # -# SPI drivers +# SPI drivers # CONFIG_SPI=y # CONFIG_DRIVER_SPI_IMX is not set # CONFIG_DRIVER_SPI_MC13783 is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_DRIVER_CFI=y # CONFIG_DRIVER_CFI_NEW is not set CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 17/36] pca100: update defconfig 2009-12-18 15:48 ` [PATCH 16/36] pcm037: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 18/36] mx27ads: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/pca100_defconfig | 110 +++++++++++++++++++++++-------------- 1 files changed, 69 insertions(+), 41 deletions(-) diff --git a/arch/arm/configs/pca100_defconfig b/arch/arm/configs/pca100_defconfig index 7ae2065..f0a9512 100644 --- a/arch/arm/configs/pca100_defconfig +++ b/arch/arm/configs/pca100_defconfig @@ -1,62 +1,85 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc9 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:49:29 2009 # -CONFIG_ARCH_TEXT_BASE=0xa7f00000 -CONFIG_BOARDINFO="Phytec phyCard-i.MX27" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set -CONFIG_MACH_PCA100=y -# CONFIG_MACH_MMCCPU is not set # -# Board specific settings +# System Type # +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0xa7f00000 +CONFIG_BOARDINFO="Phytec phyCard-i.MX27" CONFIG_ARCH_HAS_FEC_IMX=y + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set CONFIG_ARCH_IMX27=y +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +# CONFIG_MACH_EUKREA_CPUIMX27 is not set +# CONFIG_MACH_IMX27ADS is not set +CONFIG_MACH_PCA100=y +# CONFIG_MACH_PCM038 is not set + +# +# Board specific settings +# # -# i.MX specific settings +# i.MX specific settings # CONFIG_IMX_CLKO=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # +CONFIG_HAVE_MMU=y +# CONFIG_MMU is not set CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0xa7f00000 CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y @@ -90,7 +113,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/phycard-i.MX27/env/" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -98,11 +121,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/phycard-i.MX27/env/" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -115,7 +138,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -129,13 +152,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -144,18 +167,19 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -CONFIG_CMD_NAND=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -164,39 +188,41 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_FEC_IMX=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # # CONFIG_DRIVER_CFI is not set CONFIG_DRIVER_CFI_OLD=y @@ -207,9 +233,11 @@ CONFIG_NAND_IMX_BOOT=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 18/36] mx27ads: update defconfig 2009-12-18 15:48 ` [PATCH 17/36] pca100: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 19/36] ipe337: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/mx27ads_defconfig | 113 ++++++++++++++++++++++++----------- 1 files changed, 77 insertions(+), 36 deletions(-) diff --git a/arch/arm/configs/mx27ads_defconfig b/arch/arm/configs/mx27ads_defconfig index d40fbd2..71880c0 100644 --- a/arch/arm/configs/mx27ads_defconfig +++ b/arch/arm/configs/mx27ads_defconfig @@ -1,46 +1,82 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Thu Aug 21 16:59:40 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:48:21 2009 # -CONFIG_ARCH_TEXT_BASE=0xa0000000 -CONFIG_BOARDINFO="Freescale i.MX27 ADS" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0xa0000000 +CONFIG_BOARDINFO="Freescale i.MX27 ADS" +CONFIG_ARCH_HAS_FEC_IMX=y + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set CONFIG_ARCH_IMX27=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +# CONFIG_MACH_EUKREA_CPUIMX27 is not set CONFIG_MACH_IMX27ADS=y -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set +# CONFIG_MACH_PCA100 is not set +# CONFIG_MACH_PCM038 is not set + +# +# Board specific settings +# + +# +# i.MX specific settings +# CONFIG_IMX_CLKO=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # +CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0xa7f00000 @@ -75,7 +111,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/imx27ads/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -83,11 +119,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/imx27ads/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -100,7 +136,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -114,13 +150,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -129,18 +165,19 @@ CONFIG_CMD_MTEST=y CONFIG_CMD_MTEST_ALTERNATIVE=y # -# flash +# flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -149,41 +186,42 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set -CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set -CONFIG_DRIVER_NET_IMX27=y +# CONFIG_DRIVER_NET_SMC91111 is not set +# CONFIG_DRIVER_NET_FEC_IMX is not set # -# SPI drivers +# SPI drivers # CONFIG_SPI=y CONFIG_DRIVER_SPI_IMX=y CONFIG_DRIVER_SPI_MC13783=y +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y @@ -196,9 +234,12 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_4=y # CONFIG_DRIVER_CFI_BANK_WIDTH_8 is not set CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 19/36] ipe337: update defconfig 2009-12-18 15:48 ` [PATCH 18/36] mx27ads: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 20/36] scb9328: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/blackfin/configs/ipe337_defconfig | 27 +++++++++++++++++++-------- 1 files changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/configs/ipe337_defconfig b/arch/blackfin/configs/ipe337_defconfig index 16bf2c2..fd4ff66 100644 --- a/arch/blackfin/configs/ipe337_defconfig +++ b/arch/blackfin/configs/ipe337_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Thu Jul 3 10:25:25 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:53:16 2009 # CONFIG_BLACKFIN=y CONFIG_BF561=y @@ -22,6 +22,7 @@ CONFIG_ENV_HANDLING=y # # General Settings # +CONFIG_LOCALVERSION_AUTO=y # # memory layout @@ -37,8 +38,6 @@ CONFIG_MALLOC_SIZE=0x400000 # CONFIG_EXPERIMENTAL is not set CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 -CONFIG_CMDLINE_EDITING=y -# CONFIG_AUTO_COMPLETE is not set CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 @@ -46,9 +45,12 @@ CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_GLOB is not set CONFIG_PROMPT_HUSH_PS2="> " +CONFIG_CMDLINE_EDITING=y +# CONFIG_AUTO_COMPLETE is not set CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_ERRNO_MESSAGES=y CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set CONFIG_PARTITION=y @@ -76,8 +78,9 @@ CONFIG_CMD_SAVEENV=y CONFIG_CMD_LOADENV=y CONFIG_CMD_EXPORT=y CONFIG_CMD_PRINTENV=y -CONFIG_CMD_HELP=y CONFIG_CMD_READLINE=y +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # # file commands @@ -111,7 +114,6 @@ CONFIG_CMD_CRC=y # flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # # booting @@ -125,11 +127,12 @@ CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_PARTITION=y CONFIG_CMD_TEST=y +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y @@ -150,12 +153,14 @@ CONFIG_MIIPHY=y # CONFIG_DRIVER_NET_SMC911X=y CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT=1 +# CONFIG_DRIVER_NET_SMC91111 is not set # # SPI drivers # CONFIG_SPI=y # CONFIG_DRIVER_SPI_MC13783 is not set +# CONFIG_I2C is not set # # flash drivers @@ -165,10 +170,16 @@ CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # # Filesystem support # # CONFIG_FS_CRAMFS is not set +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y CONFIG_ZLIB=y CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 20/36] scb9328: update defconfig 2009-12-18 15:48 ` [PATCH 19/36] ipe337: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 21/36] pcm043: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/scb9328_defconfig | 144 ++++++++++++++++++++++++++++-------- 1 files changed, 113 insertions(+), 31 deletions(-) diff --git a/arch/arm/configs/scb9328_defconfig b/arch/arm/configs/scb9328_defconfig index d3d723f..6638234 100644 --- a/arch/arm/configs/scb9328_defconfig +++ b/arch/arm/configs/scb9328_defconfig @@ -1,79 +1,139 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-git -# Fri Oct 19 11:00:09 2007 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:50:25 2009 # -CONFIG_ARCH_TEXT_BASE=0x08f80000 -CONFIG_BOARDINFO="Synertronixx scb9328" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM920T=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x08f80000 +CONFIG_BOARDINFO="Synertronixx scb9328" + +# +# Freescale i.MX System-on-Chip +# CONFIG_ARCH_IMX1=y +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set # CONFIG_MACH_MX1ADS is not set CONFIG_MACH_SCB9328=y -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set + +# +# Board specific settings +# + +# +# i.MX specific settings +# +# CONFIG_AEABI is not set # # Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y +CONFIG_CMD_MEMORY=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings +# +CONFIG_LOCALVERSION_AUTO=y + # +# memory layout +# +CONFIG_HAVE_MMU=y +# CONFIG_MMU is not set +CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x08f80000 +CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y +CONFIG_MEMORY_LAYOUT_DEFAULT=y +# CONFIG_MEMORY_LAYOUT_FIXED is not set +CONFIG_STACK_SIZE=0x8000 +CONFIG_MALLOC_SIZE=0x400000 # CONFIG_BROKEN is not set # CONFIG_EXPERIMENTAL is not set +CONFIG_MACH_HAS_LOWLEVEL_INIT=y +CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 -CONFIG_CMDLINE_EDITING=y -# CONFIG_AUTO_COMPLETE is not set CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set +# CONFIG_GLOB is not set CONFIG_PROMPT_HUSH_PS2="> " +CONFIG_CMDLINE_EDITING=y +# CONFIG_AUTO_COMPLETE is not set CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_ERRNO_MESSAGES=y CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set +# CONFIG_PARTITION is not set CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/scb9328/env" # -# Debugging +# Debugging # -CONFIG_SKIP_LOWLEVEL_INIT=y +# CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set # CONFIG_ENABLE_PARTITION_NOISE is not set # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y -CONFIG_CMD_ENVIRONMENT=y -CONFIG_CMD_HELP=y +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_LOADENV is not set +# CONFIG_CMD_EXPORT is not set +# CONFIG_CMD_PRINTENV is not set +# CONFIG_CMD_READLINE is not set +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -87,73 +147,95 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # +# CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMORY=y # CONFIG_CMD_CRC is not set # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_PARTITION=y CONFIG_CMD_TEST=y +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y +# CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_HAS_DM9000=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_DM9000=y # -# flash drivers +# SPI drivers +# +CONFIG_SPI=y +# CONFIG_DRIVER_SPI_IMX is not set +# CONFIG_DRIVER_SPI_MC13783 is not set +# CONFIG_I2C is not set + +# +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y # CONFIG_DRIVER_CFI_NEW is not set +CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 21/36] pcm043: update defconfig 2009-12-18 15:48 ` [PATCH 20/36] scb9328: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 22/36] pm9263: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/pcm043_defconfig | 114 ++++++++++++++++++++++++------------- 1 files changed, 74 insertions(+), 40 deletions(-) diff --git a/arch/arm/configs/pcm043_defconfig b/arch/arm/configs/pcm043_defconfig index c4df354..5563356 100644 --- a/arch/arm/configs/pcm043_defconfig +++ b/arch/arm/configs/pcm043_defconfig @@ -1,61 +1,84 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc8 -# Fri Apr 17 13:27:24 2009 +# barebox version: 2009.12.0-pre +# Fri Dec 18 16:42:27 2009 # -CONFIG_ARCH_TEXT_BASE=0x87f00000 -CONFIG_BOARDINFO="Phytec phyCORE-i.MX35" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -CONFIG_MACH_PCM043=y -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set -# CONFIG_MACH_PCA100 is not set # -# Board specific settings +# System Type # +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x87f00000 +CONFIG_BOARDINFO="Phytec phyCORE-i.MX35" CONFIG_ARCH_HAS_FEC_IMX=y +# CONFIG_ARCH_IMX_INTERNAL_BOOT is not set + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set CONFIG_ARCH_IMX35=y +# CONFIG_MACH_FREESCALE_MX35_3STACK is not set +CONFIG_MACH_PCM043=y + +# +# Board specific settings +# +CONFIG_PCM043_DISPLAY_SHARP=y +# CONFIG_PCM043_DISPLAY_TY090 is not set # -# i.MX specific settings +# i.MX specific settings # # CONFIG_IMX_CLKO is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # +CONFIG_HAVE_MMU=y +# CONFIG_MMU is not set CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x87F00000 CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y @@ -89,7 +112,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm043/env/" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -97,11 +120,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm043/env/" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -114,7 +137,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -128,13 +151,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -142,17 +165,19 @@ CONFIG_CMD_CRC=y # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -161,50 +186,59 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_FEC_IMX=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y # CONFIG_DRIVER_CFI_NEW is not set CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y -# CONFIG_NAND is not set +CONFIG_NAND=y +CONFIG_NAND_IMX=y +CONFIG_NAND_IMX_BOOT=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 22/36] pm9263: update defconfig 2009-12-18 15:48 ` [PATCH 21/36] pcm043: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 23/36] netx: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/pm9263_defconfig | 96 ++++++++++++++++++++++++------------- 1 files changed, 62 insertions(+), 34 deletions(-) diff --git a/arch/arm/configs/pm9263_defconfig b/arch/arm/configs/pm9263_defconfig index 1854345..cde5cbe 100644 --- a/arch/arm/configs/pm9263_defconfig +++ b/arch/arm/configs/pm9263_defconfig @@ -1,45 +1,67 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Tue Aug 26 09:41:29 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:50:15 2009 # -CONFIG_ARCH_TEXT_BASE=0x23f00000 -CONFIG_BOARDINFO="Ronetix PM9263" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# CONFIG_ARCH_AT91=y +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x23f00000 +CONFIG_BOARDINFO="Ronetix PM9263" + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91SAM9260 is not set CONFIG_ARCH_AT91SAM9263=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_MACH_AT91SAM9263EK is not set +# CONFIG_MACH_MMCCPU is not set CONFIG_MACH_PM9263=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # +CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x23f00000 @@ -74,7 +96,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pm9263/env/" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -82,11 +104,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pm9263/env/" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -99,7 +121,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -113,13 +135,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -128,18 +150,19 @@ CONFIG_CMD_MTEST=y CONFIG_CMD_MTEST_ALTERNATIVE=y # -# flash +# flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -148,39 +171,41 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_ATMEL=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_MACB=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_NEW=y @@ -196,9 +221,12 @@ CONFIG_NAND_ATMEL=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 23/36] netx: update defconfig 2009-12-18 15:48 ` [PATCH 22/36] pm9263: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 24/36] mmccpu: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/netx_nxdb500_defconfig | 103 +++++++++++++++++++----------- 1 files changed, 65 insertions(+), 38 deletions(-) diff --git a/arch/arm/configs/netx_nxdb500_defconfig b/arch/arm/configs/netx_nxdb500_defconfig index 5315333..95afb5e 100644 --- a/arch/arm/configs/netx_nxdb500_defconfig +++ b/arch/arm/configs/netx_nxdb500_defconfig @@ -1,35 +1,49 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Thu Jul 3 09:34:20 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:48:29 2009 # -CONFIG_ARCH_TEXT_BASE=0x81f00000 -CONFIG_BOARDINFO="Hilscher Netx nxdb500" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set CONFIG_ARCH_NETX=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -CONFIG_MACH_NXDB500=y -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x81f00000 +CONFIG_BOARDINFO="Hilscher Netx nxdb500" CONFIG_NETX_SDRAM_CTRL=0x010D0121 CONFIG_NETX_SDRAM_TIMING_CTRL=0x03C13261 CONFIG_NETX_MEM_CTRL=0x0203030F CONFIG_NETX_COOKIE=32 +CONFIG_MACH_NXDB500=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y CONFIG_INITRD_TAG=y +# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y @@ -37,11 +51,12 @@ CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y # -# General Settings +# General Settings # +CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x08f80000 @@ -57,8 +72,6 @@ CONFIG_MACH_HAS_LOWLEVEL_INIT=y CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_PROMPT="barebox:" CONFIG_BAUDRATE=115200 -CONFIG_CMDLINE_EDITING=y -CONFIG_AUTO_COMPLETE=y CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 @@ -66,16 +79,19 @@ CONFIG_SHELL_HUSH=y # CONFIG_SHELL_SIMPLE is not set # CONFIG_GLOB is not set CONFIG_PROMPT_HUSH_PS2="> " +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_ERRNO_MESSAGES=y CONFIG_TIMESTAMP=y +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set CONFIG_PARTITION=y # CONFIG_DEFAULT_ENVIRONMENT is not set # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -83,11 +99,11 @@ CONFIG_PARTITION=y # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -95,11 +111,12 @@ CONFIG_CMD_SAVEENV=y CONFIG_CMD_LOADENV=y CONFIG_CMD_EXPORT=y CONFIG_CMD_PRINTENV=y -CONFIG_CMD_HELP=y CONFIG_CMD_READLINE=y +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -113,14 +130,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y -# CONFIG_CMD_SPLASH is not set # -# memory +# memory # # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set @@ -129,58 +145,63 @@ CONFIG_CMD_CRC=y # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_PARTITION=y CONFIG_CMD_TEST=y +CONFIG_CMD_VERSION=y +CONFIG_CMD_HELP=y +CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_NETX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_HAS_NETX_ETHER=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_NETX=y # -# SPI drivers +# SPI drivers # CONFIG_SPI=y # CONFIG_DRIVER_SPI_MC13783 is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y @@ -188,9 +209,15 @@ CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set +CONFIG_FS_RAMFS=y +CONFIG_FS_DEVFS=y CONFIG_CRC32=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 24/36] mmccpu: update defconfig 2009-12-18 15:48 ` [PATCH 23/36] netx: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 25/36] eukrea cpuimx27: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/mmccpu_defconfig | 110 +++++++++++++++++++------------------ 1 files changed, 57 insertions(+), 53 deletions(-) diff --git a/arch/arm/configs/mmccpu_defconfig b/arch/arm/configs/mmccpu_defconfig index bc9bd6a..2b80a30 100644 --- a/arch/arm/configs/mmccpu_defconfig +++ b/arch/arm/configs/mmccpu_defconfig @@ -1,60 +1,67 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc8 -# Tue May 19 09:44:44 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:47:54 2009 # -CONFIG_ARCH_TEXT_BASE=0x23f00000 -CONFIG_BOARDINFO="Bucyrus MMC-CPU" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set -# CONFIG_MACH_PCA100 is not set -CONFIG_MACH_MMCCPU=y +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y # -# Board specific settings +# processor features # +CONFIG_ARCH_TEXT_BASE=0x23f00000 +CONFIG_BOARDINFO="Bucyrus MMC-CPU" # -# i.MX specific settings +# Atmel AT91 System-on-Chip # +# CONFIG_ARCH_AT91SAM9260 is not set +CONFIG_ARCH_AT91SAM9263=y +# CONFIG_MACH_AT91SAM9263EK is not set +CONFIG_MACH_MMCCPU=y +# CONFIG_MACH_PM9263 is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x23f00000 @@ -89,7 +96,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/mmccpu/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -97,11 +104,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/mmccpu/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -114,7 +121,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -128,13 +135,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -143,22 +150,19 @@ CONFIG_CMD_MTEST=y CONFIG_CMD_MTEST_ALTERNATIVE=y # -# flash +# flash # CONFIG_CMD_FLASH=y # -# i2c -# -CONFIG_CMD_I2C=y - -# -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -167,39 +171,43 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_ATMEL=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_MACB=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +CONFIG_I2C=y +# CONFIG_DRIVER_I2C_MC13892 is not set +# CONFIG_DRIVER_I2C_MC9SDZ60 is not set # -# flash drivers +# flash drivers # CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_NEW=y @@ -212,15 +220,11 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_4=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# I2C drivers -# -CONFIG_I2C=y -CONFIG_DRIVER_I2C_BITBANG=y - -# -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 25/36] eukrea cpuimx27: update defconfig 2009-12-18 15:48 ` [PATCH 24/36] mmccpu: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 26/36] at91sam9260ek: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/eukrea_cpuimx27_defconfig | 109 ++++++++++++++++------------ 1 files changed, 61 insertions(+), 48 deletions(-) diff --git a/arch/arm/configs/eukrea_cpuimx27_defconfig b/arch/arm/configs/eukrea_cpuimx27_defconfig index 0e15bc5..b1624de 100644 --- a/arch/arm/configs/eukrea_cpuimx27_defconfig +++ b/arch/arm/configs/eukrea_cpuimx27_defconfig @@ -1,39 +1,52 @@ # # Automatically generated make config: don't edit # barebox version: 2.0.0-rc10 -# Thu Oct 22 16:38:29 2009 +# Fri Dec 18 11:47:22 2009 # -CONFIG_ARCH_TEXT_BASE=0xa0000000 -CONFIG_BOARDINFO="Eukrea CPUIMX27" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_FREESCALE_MX25_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set -# CONFIG_MACH_A9M2410 is not set -# CONFIG_MACH_A9M2440 is not set -# CONFIG_MACH_PCA100 is not set -# CONFIG_MACH_MMCCPU is not set -CONFIG_MACH_EUKREA_CPUIMX27=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0xa0000000 +CONFIG_BOARDINFO="Eukrea CPUIMX27" CONFIG_ARCH_HAS_FEC_IMX=y + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set CONFIG_ARCH_IMX27=y +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +CONFIG_MACH_EUKREA_CPUIMX27=y +# CONFIG_MACH_IMX27ADS is not set +# CONFIG_MACH_PCA100 is not set +# CONFIG_MACH_PCM038 is not set # -# Board specific settings +# Board specific settings # CONFIG_EUKREA_CPUIMX27_SDRAM_128MB=y # CONFIG_EUKREA_CPUIMX27_SDRAM_256MB is not set @@ -45,31 +58,33 @@ CONFIG_EUKREA_CPUIMX27_QUART1=y # CONFIG_EUKREA_CPUIMX27_QUART4 is not set # -# i.MX specific settings +# i.MX specific settings # CONFIG_IMX_CLKO=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set -# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_MMU=y CONFIG_MMU=y @@ -107,7 +122,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/eukrea_cpuimx27/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -115,11 +130,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/eukrea_cpuimx27/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -132,7 +147,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -146,13 +161,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -161,12 +176,12 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set @@ -182,6 +197,7 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set @@ -190,32 +206,34 @@ CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y CONFIG_DRIVER_SERIAL_NS16550=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set # CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_FEC_IMX=y # -# SPI drivers +# SPI drivers # CONFIG_SPI=y CONFIG_DRIVER_SPI_IMX=y CONFIG_DRIVER_SPI_MC13783=y +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y @@ -224,21 +242,16 @@ CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y CONFIG_NAND=y CONFIG_NAND_IMX=y -# CONFIG_MXC_NAND_LOW_LEVEL_ERASE is not set # CONFIG_NAND_IMX_BOOT is not set # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_USB is not set # CONFIG_USB_GADGET is not set - -# -# Video drivers -# # CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 26/36] at91sam9260ek: update defconfig 2009-12-18 15:48 ` [PATCH 25/36] eukrea cpuimx27: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 27/36] at91sam9263ek: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/at91sam9260ek_defconfig | 93 +++++++++++++++++++----------- 1 files changed, 59 insertions(+), 34 deletions(-) diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 258b82e..61df756 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -1,46 +1,65 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Tue Oct 21 18:24:32 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:46:40 2009 # -CONFIG_ARCH_TEXT_BASE=0x23f00000 -CONFIG_BOARDINFO="Atmel 91SAM9260-EK" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# CONFIG_ARCH_AT91=y +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x23f00000 +CONFIG_BOARDINFO="Atmel 91SAM9260-EK" + +# +# Atmel AT91 System-on-Chip +# CONFIG_ARCH_AT91SAM9260=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set +# CONFIG_ARCH_AT91SAM9263 is not set CONFIG_MACH_AT91SAM9260EK=y -# CONFIG_MACH_PM9263 is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # +CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x23f00000 @@ -73,7 +92,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/at91sam9260ek/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -81,11 +100,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/at91sam9260ek/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -98,7 +117,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -112,13 +131,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -127,18 +146,19 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -# CONFIG_CMD_NAND is not set # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -147,39 +167,41 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_ATMEL=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_MACB=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set @@ -188,9 +210,12 @@ CONFIG_NAND_ATMEL=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 27/36] at91sam9263ek: update defconfig 2009-12-18 15:48 ` [PATCH 26/36] at91sam9260ek: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 28/36] Digi a9m2410: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/at91sam9263ek_defconfig | 97 ++++++++++++++++-------------- 1 files changed, 52 insertions(+), 45 deletions(-) diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index c81371d..eb47856 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -1,39 +1,47 @@ # # Automatically generated make config: don't edit # barebox version: 2.0.0-rc10 -# Sat Sep 26 18:45:28 2009 +# Fri Dec 18 11:47:16 2009 # -CONFIG_ARCH_TEXT_BASE=0x23f00000 -CONFIG_BOARDINFO="Atmel at91sam9263-ek" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y + +# +# System Type +# CONFIG_ARCH_AT91=y +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x23f00000 +CONFIG_BOARDINFO="Atmel at91sam9263-ek" + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91SAM9260 is not set CONFIG_ARCH_AT91SAM9263=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_FREESCALE_MX25_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set CONFIG_MACH_AT91SAM9263EK=y -# CONFIG_MACH_PM9263 is not set -# CONFIG_MACH_A9M2410 is not set -# CONFIG_MACH_A9M2440 is not set -# CONFIG_MACH_PCA100 is not set # CONFIG_MACH_MMCCPU is not set -# CONFIG_MACH_EUKREA_CPUIMX27 is not set +# CONFIG_MACH_PM9263 is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y @@ -45,14 +53,15 @@ CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x23f00000 @@ -87,7 +96,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/at91sam9263ek/env" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -95,11 +104,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/at91sam9263ek/env" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -112,7 +121,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -126,13 +135,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -141,12 +150,12 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y # -# booting +# booting # CONFIG_CMD_BOOTM=y CONFIG_CMD_BOOTM_ZLIB=y @@ -162,40 +171,41 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set CONFIG_NET_NFS=y CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_ATMEL=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set # CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_MACB=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_NEW=y @@ -212,14 +222,11 @@ CONFIG_NAND_ATMEL=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_USB is not set - -# -# Video drivers -# +# CONFIG_USB_GADGET is not set # CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 28/36] Digi a9m2410: update defconfig 2009-12-18 15:48 ` [PATCH 27/36] at91sam9263ek: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 29/36] Digi a9m2440: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/a9m2410_defconfig | 96 +++++++++++++++++++---------------- 1 files changed, 52 insertions(+), 44 deletions(-) diff --git a/arch/arm/configs/a9m2410_defconfig b/arch/arm/configs/a9m2410_defconfig index 5cd1ac2..9429a37 100644 --- a/arch/arm/configs/a9m2410_defconfig +++ b/arch/arm/configs/a9m2410_defconfig @@ -1,53 +1,59 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc9 -# Wed Jul 1 14:15:55 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:46:05 2009 # -CONFIG_ARCH_TEXT_BASE=0x31fc0000 -CONFIG_BOARDINFO="Digi A9M2410" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_ARCH_S3C24xx=y + +# +# Processor Type +# +CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set +CONFIG_CPU_32v4T=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x31fc0000 +CONFIG_BOARDINFO="Digi A9M2410" +CONFIG_CPU_S3C2410=y CONFIG_MACH_A9M2410=y # CONFIG_MACH_A9M2440 is not set -# CONFIG_MACH_PCA100 is not set -# CONFIG_MACH_MMCCPU is not set -CONFIG_ARCH_S3C24xx=y -CONFIG_CPU_S3C2410=y # -# Board specific settings +# Board specific settings # # -# S3C24X0 Features +# S3C24X0 Features # CONFIG_S3C24XX_LOW_LEVEL_INIT=y CONFIG_S3C24XX_PLL_INIT=y CONFIG_S3C24XX_SDRAM_INIT=y CONFIG_S3C24XX_NAND_BOOT=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y @@ -55,12 +61,12 @@ CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x31fc0000 @@ -97,7 +103,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/a9m2410/env" # -# Debugging +# Debugging # CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_FLASH_NOISE is not set @@ -105,11 +111,11 @@ CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -122,7 +128,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -136,14 +142,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y -# CONFIG_CMD_SPLASH is not set # -# memory +# memory # # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADY is not set @@ -154,18 +159,19 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -CONFIG_CMD_NAND=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -175,39 +181,39 @@ CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_S3C24X0=y # CONFIG_DRIVER_SERIAL_S3C24X0_AUTOSYNC is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set CONFIG_DRIVER_NET_SMC91111=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set @@ -218,9 +224,11 @@ CONFIG_NAND_S3C24X0=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 29/36] Digi a9m2440: update defconfig 2009-12-18 15:48 ` [PATCH 28/36] Digi a9m2410: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 30/36] i.MX25 3stack: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/a9m2440_defconfig | 99 ++++++++++++++++++++---------------- 1 files changed, 55 insertions(+), 44 deletions(-) diff --git a/arch/arm/configs/a9m2440_defconfig b/arch/arm/configs/a9m2440_defconfig index f77bb70..1fcabbb 100644 --- a/arch/arm/configs/a9m2440_defconfig +++ b/arch/arm/configs/a9m2440_defconfig @@ -1,53 +1,60 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc9 -# Wed Jul 1 14:23:41 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:46:15 2009 # -CONFIG_ARCH_TEXT_BASE=0x31fc0000 -CONFIG_BOARDINFO="Digi A9M2440" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_ARCH_S3C24xx=y + +# +# Processor Type +# +CONFIG_CPU_32=y CONFIG_CPU_ARM920T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set +CONFIG_CPU_32v4T=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x31fc0000 +CONFIG_BOARDINFO="Digi A9M2440" +CONFIG_CPU_S3C2440=y # CONFIG_MACH_A9M2410 is not set CONFIG_MACH_A9M2440=y -# CONFIG_MACH_PCA100 is not set -# CONFIG_MACH_MMCCPU is not set -CONFIG_ARCH_S3C24xx=y -CONFIG_CPU_S3C2440=y # -# Board specific settings +# Board specific settings # +CONFIG_MACH_A9M2410DEV=y # -# S3C24X0 Features +# S3C24X0 Features # CONFIG_S3C24XX_LOW_LEVEL_INIT=y CONFIG_S3C24XX_PLL_INIT=y CONFIG_S3C24XX_SDRAM_INIT=y CONFIG_S3C24XX_NAND_BOOT=y +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y @@ -55,12 +62,12 @@ CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x31fc0000 @@ -97,7 +104,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/a9m2440/env" # -# Debugging +# Debugging # CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_FLASH_NOISE is not set @@ -105,11 +112,11 @@ CONFIG_DEBUG_INFO=y # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -122,7 +129,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -136,14 +143,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y -# CONFIG_CMD_SPLASH is not set # -# memory +# memory # # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADY is not set @@ -154,18 +160,19 @@ CONFIG_CMD_MTEST=y # CONFIG_CMD_MTEST_ALTERNATIVE is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -CONFIG_CMD_NAND=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -175,39 +182,41 @@ CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_DRIVER_SERIAL_S3C24X0=y # CONFIG_DRIVER_SERIAL_S3C24X0_AUTOSYNC is not set +CONFIG_HAS_CS8900=y CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # +# CONFIG_DRIVER_NET_CS8900 is not set # CONFIG_DRIVER_NET_SMC911X is not set CONFIG_DRIVER_NET_SMC91111=y # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set @@ -218,9 +227,11 @@ CONFIG_NAND_S3C24X0=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 30/36] i.MX25 3stack: update defconfig 2009-12-18 15:48 ` [PATCH 29/36] Digi a9m2440: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 31/36] i.MX35 " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/freescale_mx25_3stack_defconfig | 108 +++++++++++++-------- 1 files changed, 67 insertions(+), 41 deletions(-) diff --git a/arch/arm/configs/freescale_mx25_3stack_defconfig b/arch/arm/configs/freescale_mx25_3stack_defconfig index d9cefd4..d308e5b 100644 --- a/arch/arm/configs/freescale_mx25_3stack_defconfig +++ b/arch/arm/configs/freescale_mx25_3stack_defconfig @@ -1,60 +1,80 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc8 -# Wed Apr 8 13:06:07 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:47:29 2009 # -CONFIG_ARCH_TEXT_BASE=0x87f00000 -CONFIG_BOARDINFO="Freescale MX25 3Stack" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_ARM926T=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX21ADS is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set -# CONFIG_MACH_FREESCALE_MX35_3STACK is not set -CONFIG_MACH_FREESCALE_MX25_3STACK=y -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set # -# Board specific settings +# System Type # +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x87f00000 +CONFIG_BOARDINFO="Freescale MX25 3Stack" CONFIG_ARCH_HAS_FEC_IMX=y +# CONFIG_ARCH_IMX_INTERNAL_BOOT is not set + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set CONFIG_ARCH_IMX25=y +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set +# CONFIG_ARCH_IMX35 is not set +CONFIG_MACH_FREESCALE_MX25_3STACK=y + +# +# Board specific settings +# # -# i.MX specific settings +# i.MX specific settings # +# CONFIG_IMX_CLKO is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x87F00000 @@ -89,7 +109,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/freescale-mx25-3-stack/env/" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -97,11 +117,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/freescale-mx25-3-stack/env/" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -114,7 +134,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -128,13 +148,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -142,18 +162,19 @@ CONFIG_CMD_CRC=y # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y -CONFIG_CMD_NAND=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -162,54 +183,59 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # # CONFIG_DRIVER_NET_SMC911X is not set +# CONFIG_DRIVER_NET_SMC91111 is not set CONFIG_DRIVER_NET_FEC_IMX=y # CONFIG_NET_USB is not set # -# SPI drivers +# SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set CONFIG_NAND=y +# CONFIG_NAND_IMX is not set # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y CONFIG_USB=y CONFIG_USB_EHCI=y # CONFIG_USB_ISP1504 is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 31/36] i.MX35 3stack: update defconfig 2009-12-18 15:48 ` [PATCH 30/36] i.MX25 3stack: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 32/36] sdp3430: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/freescale_mx35_3stack_defconfig | 108 ++++++++++++++-------- 1 files changed, 70 insertions(+), 38 deletions(-) diff --git a/arch/arm/configs/freescale_mx35_3stack_defconfig b/arch/arm/configs/freescale_mx35_3stack_defconfig index d48adf5..1319a69 100644 --- a/arch/arm/configs/freescale_mx35_3stack_defconfig +++ b/arch/arm/configs/freescale_mx35_3stack_defconfig @@ -1,57 +1,79 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc7 -# Mon Feb 2 16:43:49 2009 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:47:45 2009 # -CONFIG_ARCH_TEXT_BASE=0x87f00000 -CONFIG_BOARDINFO="Freescale MX35 3Stack" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_IMX=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x87f00000 +CONFIG_BOARDINFO="Freescale MX35 3Stack" +CONFIG_ARCH_HAS_FEC_IMX=y +# CONFIG_ARCH_IMX_INTERNAL_BOOT is not set + +# +# Freescale i.MX System-on-Chip +# +# CONFIG_ARCH_IMX1 is not set +# CONFIG_ARCH_IMX21 is not set +# CONFIG_ARCH_IMX25 is not set +# CONFIG_ARCH_IMX27 is not set +# CONFIG_ARCH_IMX31 is not set CONFIG_ARCH_IMX35=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_PCM043 is not set CONFIG_MACH_FREESCALE_MX35_3STACK=y -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_OMAP is not set -# CONFIG_MACH_AT91SAM9260EK is not set -# CONFIG_MACH_PM9263 is not set +# CONFIG_MACH_PCM043 is not set # -# Board specific settings +# Board specific settings # # -# i.MX specific settings +# i.MX specific settings # -# CONFIG_CMD_IMX_FUSE is not set +# CONFIG_IMX_CLKO is not set +# CONFIG_AEABI is not set # -# Arm specific settings +# Arm specific settings # CONFIG_CMD_ARM_CPUINFO=y CONFIG_CMDLINE_TAG=y CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y CONFIG_ENV_HANDLING=y +CONFIG_GENERIC_GPIO=y # -# General Settings +# General Settings # CONFIG_LOCALVERSION_AUTO=y # -# memory layout +# memory layout # CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_TEXT_BASE=0x87F00000 @@ -86,7 +108,7 @@ CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm043/env/" # -# Debugging +# Debugging # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_FLASH_NOISE is not set @@ -94,11 +116,11 @@ CONFIG_DEFAULT_ENVIRONMENT_PATH="board/pcm043/env/" # CONFIG_ENABLE_DEVICE_NOISE is not set # -# Commands +# Commands # # -# scripting +# scripting # CONFIG_CMD_EDIT=y CONFIG_CMD_SLEEP=y @@ -111,7 +133,7 @@ CONFIG_CMD_TRUE=y CONFIG_CMD_FALSE=y # -# file commands +# file commands # CONFIG_CMD_LS=y CONFIG_CMD_RM=y @@ -125,13 +147,13 @@ CONFIG_CMD_MOUNT=y CONFIG_CMD_UMOUNT=y # -# console +# console # CONFIG_CMD_CLEAR=y CONFIG_CMD_ECHO=y # -# memory +# memory # # CONFIG_CMD_LOADB is not set CONFIG_CMD_MEMINFO=y @@ -139,17 +161,19 @@ CONFIG_CMD_CRC=y # CONFIG_CMD_MTEST is not set # -# flash +# flash # CONFIG_CMD_FLASH=y # -# booting +# booting # CONFIG_CMD_BOOTM=y # CONFIG_CMD_BOOTM_ZLIB is not set # CONFIG_CMD_BOOTM_BZLIB is not set # CONFIG_CMD_BOOTM_SHOW_TYPE is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y @@ -158,42 +182,47 @@ CONFIG_CMD_TEST=y CONFIG_CMD_VERSION=y CONFIG_CMD_HELP=y CONFIG_CMD_DEVINFO=y +CONFIG_CMD_GPIO=y CONFIG_NET=y -CONFIG_NET_BOOTP=y CONFIG_NET_DHCP=y # CONFIG_NET_RARP is not set -# CONFIG_NET_SNTP is not set # CONFIG_NET_NFS is not set CONFIG_NET_PING=y CONFIG_NET_TFTP=y # -# Drivers +# Drivers # # -# serial drivers +# serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_IMX=y # CONFIG_DRIVER_SERIAL_NS16550 is not set CONFIG_MIIPHY=y # -# Network drivers +# Network drivers # CONFIG_DRIVER_NET_SMC911X=y CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT=0 -CONFIG_DRIVER_NET_IMX27=y +# CONFIG_DRIVER_NET_SMC91111 is not set +# CONFIG_DRIVER_NET_FEC_IMX is not set # -# SPI drivers +# SPI drivers # CONFIG_SPI=y # CONFIG_DRIVER_SPI_IMX is not set # CONFIG_DRIVER_SPI_MC13783 is not set +CONFIG_I2C=y +CONFIG_DRIVER_I2C_IMX=y +CONFIG_DRIVER_I2C_MC13892=y +CONFIG_DRIVER_I2C_MC9SDZ60=y # -# flash drivers +# flash drivers # CONFIG_HAS_CFI=y CONFIG_DRIVER_CFI=y @@ -201,9 +230,12 @@ CONFIG_DRIVER_CFI=y CONFIG_DRIVER_CFI_OLD=y CONFIG_CFI_BUFFER_WRITE=y # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # -# Filesystem support +# Filesystem support # # CONFIG_FS_CRAMFS is not set CONFIG_FS_RAMFS=y -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 32/36] sdp3430: update defconfig 2009-12-18 15:48 ` [PATCH 31/36] i.MX35 " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 33/36] beagle board: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- .../configs/omap3430_sdp3430_per_uart_defconfig | 67 +++++++++++++++----- 1 files changed, 50 insertions(+), 17 deletions(-) diff --git a/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig b/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig index 81bd0c1..4501f5a 100644 --- a/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig +++ b/arch/arm/configs/omap3430_sdp3430_per_uart_defconfig @@ -1,23 +1,34 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Wed Jun 4 13:18:29 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:48:53 2009 # -CONFIG_ARCH_TEXT_BASE=0x80e80000 -CONFIG_BOARDINFO="Texas Instrument's SDP343x" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_V7=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set CONFIG_ARCH_OMAP=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -CONFIG_MACH_OMAP=y +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x80e80000 +CONFIG_BOARDINFO="Texas Instrument's SDP343x" # # OMAP Features @@ -29,20 +40,28 @@ CONFIG_OMAP_CLOCK_ALL=y CONFIG_OMAP_CLOCK_SOURCE_S32K=y CONFIG_OMAP3_CLOCK_CONFIG=y # CONFIG_OMAP3_COPY_CLOCK_SRAM is not set +CONFIG_GPMC=y # # OMAP Platform Features # CONFIG_MACH_OMAP343xSDP=y +# CONFIG_MACH_BEAGLE is not set +# CONFIG_MACH_OMAP3EVM is not set # CONFIG_MACH_OMAP_ADVANCED_MUX is not set +CONFIG_HAS_OMAP_NAND=y +# CONFIG_MACH_OMAP_GPMC_NAND is not set +# CONFIG_AEABI is not set # # Arm specific settings # -# CONFIG_CMDLINE_TAG is not set -# CONFIG_SETUP_MEMORY_TAGS is not set +CONFIG_CMD_ARM_CPUINFO=y +CONFIG_CMDLINE_TAG=y +CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set # CONFIG_CPU_V7_DCACHE_SKIP is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y # CONFIG_CMD_MEMORY is not set @@ -50,6 +69,7 @@ CONFIG_HAS_MODULES=y # # General Settings # +CONFIG_LOCALVERSION_AUTO=y # # memory layout @@ -70,15 +90,16 @@ CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_ARCH_HAS_LOWLEVEL_INIT=y CONFIG_PROMPT="X-load 343x> " CONFIG_BAUDRATE=115200 -# CONFIG_CMDLINE_EDITING is not set CONFIG_SIMPLE_READLINE=y CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 # CONFIG_SHELL_HUSH is not set CONFIG_SHELL_SIMPLE=y +# CONFIG_CMDLINE_EDITING is not set # CONFIG_ERRNO_MESSAGES is not set # CONFIG_TIMESTAMP is not set +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set # CONFIG_PARTITION is not set @@ -106,8 +127,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_CMD_LOADENV is not set # CONFIG_CMD_EXPORT is not set # CONFIG_CMD_PRINTENV is not set -# CONFIG_CMD_HELP is not set # CONFIG_CMD_READLINE is not set +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # # file commands @@ -146,10 +168,15 @@ CONFIG_CMD_LOADB=y # booting # # CONFIG_CMD_BOOTM is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y # CONFIG_CMD_RESET is not set CONFIG_CMD_GO=y # CONFIG_CMD_TIMEOUT is not set # CONFIG_CMD_PARTITION is not set +CONFIG_CMD_VERSION=y +# CONFIG_CMD_HELP is not set +CONFIG_CMD_DEVINFO=y # CONFIG_NET is not set # @@ -159,6 +186,7 @@ CONFIG_CMD_GO=y # # serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_NS16550=y CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y @@ -166,6 +194,7 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y # SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # # flash drivers @@ -173,6 +202,9 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # # Filesystem support @@ -181,3 +213,4 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y CONFIG_FS_RAMFS=y CONFIG_FS_DEVFS=y CONFIG_CRC16=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 33/36] beagle board: update defconfig 2009-12-18 15:48 ` [PATCH 32/36] sdp3430: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 34/36] omap3_evm: " Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- .../arm/configs/omap3530_beagle_per_uart_defconfig | 68 ++++++++++++++------ 1 files changed, 49 insertions(+), 19 deletions(-) diff --git a/arch/arm/configs/omap3530_beagle_per_uart_defconfig b/arch/arm/configs/omap3530_beagle_per_uart_defconfig index 3af7993..76fbe84 100644 --- a/arch/arm/configs/omap3530_beagle_per_uart_defconfig +++ b/arch/arm/configs/omap3530_beagle_per_uart_defconfig @@ -1,24 +1,34 @@ # # Automatically generated make config: don't edit -# barebox version: 2.0.0-rc5-git -# Tue Jun 24 02:22:41 2008 +# barebox version: 2.0.0-rc10 +# Fri Dec 18 11:49:08 2009 # -CONFIG_ARCH_TEXT_BASE=0x80e80000 -CONFIG_BOARDINFO="Texas Instrument's Beagle" # CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y -CONFIG_CPU_V7=y + +# +# System Type +# +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set CONFIG_ARCH_OMAP=y -# CONFIG_MACH_MX1ADS is not set -# CONFIG_MACH_SCB9328 is not set -# CONFIG_MACH_PCM038 is not set -# CONFIG_MACH_IMX27ADS is not set -# CONFIG_MACH_ECO920 is not set -# CONFIG_MACH_NXDB500 is not set -# CONFIG_MACH_PCM037 is not set -CONFIG_MACH_OMAP=y -# CONFIG_MACH_AT91SAM9260EK is not set +# CONFIG_ARCH_S3C24xx is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y + +# +# processor features +# +CONFIG_ARCH_TEXT_BASE=0x80e80000 +CONFIG_BOARDINFO="Texas Instrument's Beagle" # # OMAP Features @@ -30,20 +40,27 @@ CONFIG_OMAP_CLOCK_ALL=y CONFIG_OMAP_CLOCK_SOURCE_S32K=y CONFIG_OMAP3_CLOCK_CONFIG=y # CONFIG_OMAP3_COPY_CLOCK_SRAM is not set +CONFIG_GPMC=y # # OMAP Platform Features # # CONFIG_MACH_OMAP343xSDP is not set CONFIG_MACH_BEAGLE=y +# CONFIG_MACH_OMAP3EVM is not set +CONFIG_HAS_OMAP_NAND=y +# CONFIG_MACH_OMAP_GPMC_NAND is not set +# CONFIG_AEABI is not set # # Arm specific settings # -# CONFIG_CMDLINE_TAG is not set -# CONFIG_SETUP_MEMORY_TAGS is not set +CONFIG_CMD_ARM_CPUINFO=y +CONFIG_CMDLINE_TAG=y +CONFIG_SETUP_MEMORY_TAGS=y # CONFIG_INITRD_TAG is not set # CONFIG_CPU_V7_DCACHE_SKIP is not set +# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y CONFIG_CMD_MEMORY=y @@ -51,6 +68,7 @@ CONFIG_CMD_MEMORY=y # # General Settings # +CONFIG_LOCALVERSION_AUTO=y # # memory layout @@ -71,15 +89,16 @@ CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_ARCH_HAS_LOWLEVEL_INIT=y CONFIG_PROMPT="X-load Beagle>" CONFIG_BAUDRATE=115200 -# CONFIG_CMDLINE_EDITING is not set CONFIG_SIMPLE_READLINE=y CONFIG_LONGHELP=y CONFIG_CBSIZE=1024 CONFIG_MAXARGS=16 # CONFIG_SHELL_HUSH is not set CONFIG_SHELL_SIMPLE=y +# CONFIG_CMDLINE_EDITING is not set # CONFIG_ERRNO_MESSAGES is not set # CONFIG_TIMESTAMP is not set +CONFIG_CONSOLE_FULL=y CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_OF_FLAT_TREE is not set # CONFIG_PARTITION is not set @@ -107,8 +126,9 @@ CONFIG_CONSOLE_ACTIVATE_FIRST=y # CONFIG_CMD_LOADENV is not set # CONFIG_CMD_EXPORT is not set # CONFIG_CMD_PRINTENV is not set -# CONFIG_CMD_HELP is not set # CONFIG_CMD_READLINE is not set +CONFIG_CMD_TRUE=y +CONFIG_CMD_FALSE=y # # file commands @@ -142,16 +162,20 @@ CONFIG_CMD_LOADB=y # flash # # CONFIG_CMD_FLASH is not set -# CONFIG_CMD_NAND is not set # # booting # # CONFIG_CMD_BOOTM is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_BOOTU=y # CONFIG_CMD_RESET is not set CONFIG_CMD_GO=y # CONFIG_CMD_TIMEOUT is not set # CONFIG_CMD_PARTITION is not set +CONFIG_CMD_VERSION=y +# CONFIG_CMD_HELP is not set +CONFIG_CMD_DEVINFO=y # CONFIG_NET is not set # @@ -161,6 +185,7 @@ CONFIG_CMD_GO=y # # serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_NS16550=y CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y @@ -168,6 +193,7 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y # SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # # flash drivers @@ -175,6 +201,9 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y # CONFIG_DRIVER_CFI is not set # CONFIG_DRIVER_CFI_OLD is not set # CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # # Filesystem support @@ -183,3 +212,4 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y CONFIG_FS_RAMFS=y CONFIG_FS_DEVFS=y CONFIG_CRC16=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 34/36] omap3_evm: update defconfig 2009-12-18 15:48 ` [PATCH 33/36] beagle board: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 35/36] Makefile: clean barebox.ldr Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/configs/omap3_evm_defconfig | 27 +++++++++++++++++++++++---- 1 files changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index 99d1198..abf60e6 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -1,15 +1,22 @@ # # Automatically generated make config: don't edit -# U-Boot version: 2.0.0-rc10 -# Mon Dec 14 16:16:09 2009 +# barebox version: 2009.12.0-pre +# Fri Dec 18 16:39:27 2009 # +# CONFIG_BOARD_LINKER_SCRIPT is not set CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ARM=y # # System Type # +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NETX is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_S3C24xx is not set + # # Processor Type # @@ -20,7 +27,6 @@ CONFIG_CPU_32v7=y # # processor features # -CONFIG_ARCH_TEXT_BASE=0x80e80000 CONFIG_BOARDINFO="Texas Instrument's OMAP3EVM" # @@ -38,10 +44,13 @@ CONFIG_GPMC=y # # OMAP Platform Features # +# CONFIG_MACH_OMAP343xSDP is not set +# CONFIG_MACH_BEAGLE is not set CONFIG_MACH_OMAP3EVM=y CONFIG_OMAP3EVM_UART1=y # CONFIG_OMAP3EVM_UART3 is not set CONFIG_HAS_OMAP_NAND=y +# CONFIG_MACH_OMAP_GPMC_NAND is not set CONFIG_AEABI=y # @@ -52,6 +61,7 @@ CONFIG_CMD_ARM_CPUINFO=y # CONFIG_SETUP_MEMORY_TAGS is not set # CONFIG_INITRD_TAG is not set # CONFIG_CPU_V7_DCACHE_SKIP is not set +# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set CONFIG_HAS_KALLSYMS=y CONFIG_HAS_MODULES=y # CONFIG_CMD_MEMORY is not set @@ -152,6 +162,7 @@ CONFIG_CMD_MEMINFO=y # # flash # +# CONFIG_CMD_FLASH is not set # # booting @@ -175,6 +186,7 @@ CONFIG_CMD_DEVINFO=y # # serial drivers # +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set CONFIG_DRIVER_SERIAL_NS16550=y CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y @@ -182,11 +194,17 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y # SPI drivers # # CONFIG_SPI is not set +# CONFIG_I2C is not set # # flash drivers # - +# CONFIG_DRIVER_CFI is not set +CONFIG_DRIVER_CFI_OLD=y +# CONFIG_NAND is not set +# CONFIG_USB is not set +# CONFIG_USB_GADGET is not set +# CONFIG_VIDEO is not set # # Filesystem support @@ -195,3 +213,4 @@ CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y CONFIG_FS_RAMFS=y CONFIG_FS_DEVFS=y CONFIG_CRC16=y +# CONFIG_GENERIC_FIND_NEXT_BIT is not set -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 35/36] Makefile: clean barebox.ldr 2009-12-18 15:48 ` [PATCH 34/36] omap3_evm: " Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 2009-12-18 15:48 ` [PATCH 36/36] Fix barebox Version number Sascha Hauer 0 siblings, 1 reply; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Makefile b/Makefile index d69f6ef..5c45db6 100644 --- a/Makefile +++ b/Makefile @@ -939,7 +939,7 @@ endif # CONFIG_MODULES CLEAN_DIRS += $(MODVERDIR) CLEAN_FILES += barebox System.map include/barebox_default_env.h \ .tmp_version .tmp_barebox* barebox.bin barebox.S \ - .tmp_kallsyms* barebox_default_env + .tmp_kallsyms* barebox_default_env barebox.ldr # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config include2 usr/include -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
* [PATCH 36/36] Fix barebox Version number 2009-12-18 15:48 ` [PATCH 35/36] Makefile: clean barebox.ldr Sascha Hauer @ 2009-12-18 15:48 ` Sascha Hauer 0 siblings, 0 replies; 37+ messages in thread From: Sascha Hauer @ 2009-12-18 15:48 UTC (permalink / raw) To: barebox Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- Makefile | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 5c45db6..f2dc079 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ -VERSION = 2 -PATCHLEVEL = 0 +VERSION = 2009 +PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION =-rc10 +EXTRAVERSION =-pre NAME = Amissive Actinocutious Kiwi # *DOCUMENTATION* -- 1.6.5.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2009-12-18 15:49 UTC | newest] Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-12-18 15:47 barebox Patches Sascha Hauer 2009-12-18 15:47 ` [PATCH 01/36] i.MX25 3stack: fixup flash header to new names/layout Sascha Hauer 2009-12-18 15:47 ` [PATCH 02/36] ipe337: add missing include Sascha Hauer 2009-12-18 15:47 ` [PATCH 03/36] scb9328: setup chipselect the correct way Sascha Hauer 2009-12-18 15:47 ` [PATCH 04/36] read_key: Use ARRAY_SIZE instead of hardcoded value Sascha Hauer 2009-12-18 15:47 ` [PATCH 05/36] Remove unnecessary casts in key defines Sascha Hauer 2009-12-18 15:47 ` [PATCH 06/36] replace // style comments Sascha Hauer 2009-12-18 15:47 ` [PATCH 07/36] netx: enable second ethernet device Sascha Hauer 2009-12-18 15:47 ` [PATCH 08/36] pcm037: Add missing include Sascha Hauer 2009-12-18 15:47 ` [PATCH 09/36] imx ipu fb: Make fb_videomode const Sascha Hauer 2009-12-18 15:47 ` [PATCH 10/36] i.MX nand: mx21 has a v1 type controller Sascha Hauer 2009-12-18 15:48 ` [PATCH 11/36] vsprintf: Only define PAGE_SIZE if not already defined Sascha Hauer 2009-12-18 15:48 ` [PATCH 12/36] i2c: Add a no-op i2c_register_board_info if i2c is disabled Sascha Hauer 2009-12-18 15:48 ` [PATCH 13/36] sandbox: update defconfig Sascha Hauer 2009-12-18 15:48 ` [PATCH 14/36] pcm030: Update defconfig Sascha Hauer 2009-12-18 15:48 ` [PATCH 15/36] mx21ads: update defconfig Sascha Hauer 2009-12-18 15:48 ` [PATCH 16/36] pcm037: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 17/36] pca100: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 18/36] mx27ads: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 19/36] ipe337: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 20/36] scb9328: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 21/36] pcm043: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 22/36] pm9263: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 23/36] netx: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 24/36] mmccpu: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 25/36] eukrea cpuimx27: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 26/36] at91sam9260ek: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 27/36] at91sam9263ek: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 28/36] Digi a9m2410: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 29/36] Digi a9m2440: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 30/36] i.MX25 3stack: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 31/36] i.MX35 " Sascha Hauer 2009-12-18 15:48 ` [PATCH 32/36] sdp3430: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 33/36] beagle board: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 34/36] omap3_evm: " Sascha Hauer 2009-12-18 15:48 ` [PATCH 35/36] Makefile: clean barebox.ldr Sascha Hauer 2009-12-18 15:48 ` [PATCH 36/36] Fix barebox Version number Sascha Hauer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox