mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH V2] Documentation: fix typos & correct symlink
@ 2010-03-24 13:16 Wolfram Sang
  2010-03-25  7:40 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Wolfram Sang @ 2010-03-24 13:16 UTC (permalink / raw)
  To: barebox; +Cc: Wolfram Sang

I found the wrong symlink and activated the spell-checker while I was here.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---

Since V1, I dropped the "barebox's licence"-part.

 Documentation/barebox-main.dox |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/barebox-main.dox b/Documentation/barebox-main.dox
index 743add8..01c45c1 100644
--- a/Documentation/barebox-main.dox
+++ b/Documentation/barebox-main.dox
@@ -48,7 +48,7 @@ things right - without caring about losing support for old boards.
 - simulation target
   - @a barebox can be compiled to run under Linux. While this is rather useless
     in real world this is a great debugging and development aid. New features
-    can be easily developped and tested on long train journeys and started
+    can be easily developed and tested on long train journeys and started
     under gdb. There is a console driver for linux which emulates a serial
     device and a tap based ethernet driver. Linux files can be mapped to
     devices under @a barebox to emulate storage devices.
@@ -59,7 +59,7 @@ things right - without caring about losing support for old boards.
     'eth0.ip=192.168.0.7' or 'echo $eth0.ip'
 
 - initcalls
-  - hooks in the startup process can be archieved with *_initcall() directives
+  - hooks in the startup process can be achieved with *_initcall() directives
     in each file.
 
 - getopt
@@ -91,7 +91,7 @@ cross_compile pointing to your architecture and compiler. For @p ARCH=sandbox
 we do not need a cross compiler so it is sufficient to specify the
 architecture:
 
-@code # ln -s sandbox cross_arch @endcode
+@code # ln -s arch/sandbox cross_arch @endcode
 
 In order to configure the various aspects of @a barebox, start the @a barebox
 configuration system:
@@ -102,7 +102,7 @@ This command starts a menu box and lets you select all the different
 options available for your architecture. Once the configuration was
 finished (you can simulate this by using the standard demo config file
 with 'make sandbox_defconfig'), there is a .config file in the toplevel
-directory of the sourcode.
+directory of the sourcecode.
 
 Once @a barebox is configured, we can start the compilation
 
@@ -115,7 +115,7 @@ If everything goes well, the result is a file called @p barebox:
     -rwxr-xr-x 1 rsc ptx 114073 Jun 26 22:34 barebox
 @endcode
 
-@a barebox usually needs an environment for storing the configuation data.
+@a barebox usually needs an environment for storing the configuration data.
 You can generate an environment using the example environment contained
 in board/sandbox/env:
 
@@ -146,7 +146,7 @@ loaded the example environment @a barebox will show you a menu asking for
 your settings.
 
 If you have started @a barebox as root you will find a new tap device on your
-host which you can configure using ifconfig. Once you configured @a barebox's
+host which you can configure using ifconfig. Once you configured the
 network settings accordingly you can do a ping or tftpboot.
 
 If you have mapped a cramfs image try mounting it with
@@ -191,7 +191,7 @@ net /                     -> Networking stuff
 
 scripts /                 -> Kconfig system
 
-Documentation /           -> Parts of the documention, also doxygen
+Documentation /           -> Parts of the documentation, also doxygen
 @endverbatim
 
 @section license barebox's License
-- 
1.7.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH V2] Documentation: fix typos & correct symlink
  2010-03-24 13:16 [PATCH V2] Documentation: fix typos & correct symlink Wolfram Sang
@ 2010-03-25  7:40 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2010-03-25  7:40 UTC (permalink / raw)
  To: Wolfram Sang; +Cc: barebox

On Wed, Mar 24, 2010 at 02:16:23PM +0100, Wolfram Sang wrote:
> I found the wrong symlink and activated the spell-checker while I was here.

Applied.

Sascha

> 
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> ---
> 
> Since V1, I dropped the "barebox's licence"-part.
> 
>  Documentation/barebox-main.dox |   14 +++++++-------
>  1 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/barebox-main.dox b/Documentation/barebox-main.dox
> index 743add8..01c45c1 100644
> --- a/Documentation/barebox-main.dox
> +++ b/Documentation/barebox-main.dox
> @@ -48,7 +48,7 @@ things right - without caring about losing support for old boards.
>  - simulation target
>    - @a barebox can be compiled to run under Linux. While this is rather useless
>      in real world this is a great debugging and development aid. New features
> -    can be easily developped and tested on long train journeys and started
> +    can be easily developed and tested on long train journeys and started
>      under gdb. There is a console driver for linux which emulates a serial
>      device and a tap based ethernet driver. Linux files can be mapped to
>      devices under @a barebox to emulate storage devices.
> @@ -59,7 +59,7 @@ things right - without caring about losing support for old boards.
>      'eth0.ip=192.168.0.7' or 'echo $eth0.ip'
>  
>  - initcalls
> -  - hooks in the startup process can be archieved with *_initcall() directives
> +  - hooks in the startup process can be achieved with *_initcall() directives
>      in each file.
>  
>  - getopt
> @@ -91,7 +91,7 @@ cross_compile pointing to your architecture and compiler. For @p ARCH=sandbox
>  we do not need a cross compiler so it is sufficient to specify the
>  architecture:
>  
> -@code # ln -s sandbox cross_arch @endcode
> +@code # ln -s arch/sandbox cross_arch @endcode
>  
>  In order to configure the various aspects of @a barebox, start the @a barebox
>  configuration system:
> @@ -102,7 +102,7 @@ This command starts a menu box and lets you select all the different
>  options available for your architecture. Once the configuration was
>  finished (you can simulate this by using the standard demo config file
>  with 'make sandbox_defconfig'), there is a .config file in the toplevel
> -directory of the sourcode.
> +directory of the sourcecode.
>  
>  Once @a barebox is configured, we can start the compilation
>  
> @@ -115,7 +115,7 @@ If everything goes well, the result is a file called @p barebox:
>      -rwxr-xr-x 1 rsc ptx 114073 Jun 26 22:34 barebox
>  @endcode
>  
> -@a barebox usually needs an environment for storing the configuation data.
> +@a barebox usually needs an environment for storing the configuration data.
>  You can generate an environment using the example environment contained
>  in board/sandbox/env:
>  
> @@ -146,7 +146,7 @@ loaded the example environment @a barebox will show you a menu asking for
>  your settings.
>  
>  If you have started @a barebox as root you will find a new tap device on your
> -host which you can configure using ifconfig. Once you configured @a barebox's
> +host which you can configure using ifconfig. Once you configured the
>  network settings accordingly you can do a ping or tftpboot.
>  
>  If you have mapped a cramfs image try mounting it with
> @@ -191,7 +191,7 @@ net /                     -> Networking stuff
>  
>  scripts /                 -> Kconfig system
>  
> -Documentation /           -> Parts of the documention, also doxygen
> +Documentation /           -> Parts of the documentation, also doxygen
>  @endverbatim
>  
>  @section license barebox's License
> -- 
> 1.7.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2010-03-25  7:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-03-24 13:16 [PATCH V2] Documentation: fix typos & correct symlink Wolfram Sang
2010-03-25  7:40 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox