mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 01/11] pcm037: Add MMU support
Date: Mon, 14 Jun 2010 11:48:31 +0200	[thread overview]
Message-ID: <1276508921-3264-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1276508921-3264-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig |    2 ++
 board/pcm037/pcm037.c     |   31 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 419daab..721264b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -206,7 +206,9 @@ choice
 config MACH_PCM037
 	bool "phyCORE-i.MX31"
 	select MACH_HAS_LOWLEVEL_INIT
+	select HAVE_MMU
 	select USB_ISP1504 if USB
+	select ARCH_HAS_L2X0
 	help
 	  Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
 	  with a Freescale i.MX31 Processor
diff --git a/board/pcm037/pcm037.c b/board/pcm037/pcm037.c
index aee40c6..2e6968b 100644
--- a/board/pcm037/pcm037.c
+++ b/board/pcm037/pcm037.c
@@ -33,6 +33,7 @@
 #include <asm/armlinux.h>
 #include <mach/gpio.h>
 #include <asm/io.h>
+#include <asm/mmu.h>
 #include <partition.h>
 #include <asm/mach-types.h>
 #include <mach/imx-nand.h>
@@ -117,6 +118,7 @@ static struct device_d sdram1_dev = {
 struct imx_nand_platform_data nand_info = {
 	.width = 1,
 	.hw_ecc = 1,
+	.flash_bbt = 1,
 };
 
 static struct device_d nand_dev = {
@@ -226,8 +228,37 @@ static void pcm037_usb_init(void)
 }
 #endif
 
+#ifdef CONFIG_MMU
+static void pcm037_mmu_init(void)
+{
+	mmu_init();
+
+	arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
+	arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
+
+	setup_dma_coherent(0x10000000);
+
+#if TEXT_BASE & (0x100000 - 1)
+#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary
+#else
+	arm_create_section(0x0,        TEXT_BASE,   1, PMD_SECT_DEF_UNCACHED);
+#endif
+	mmu_enable();
+
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
+#endif
+}
+#else
+static void pcm037_mmu_init(void)
+{
+}
+#endif
+
 static int imx31_devices_init(void)
 {
+	pcm037_mmu_init();
+
 	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
 	__REG(CSCR_L(0)) = 0x10000d03;
 	__REG(CSCR_A(0)) = 0x00720900;
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2010-06-14  9:48 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-14  9:48 More patches Sascha Hauer
2010-06-14  9:48 ` Sascha Hauer [this message]
2010-06-14  9:48 ` [PATCH 02/11] bootu: Allow passing in devices as parameter Sascha Hauer
2010-06-14  9:48 ` [PATCH 03/11] Allow to merge default environment from more than one directory Sascha Hauer
2010-06-14  9:48 ` [PATCH 04/11] include support for a simple pseudo number generator Sascha Hauer
2010-06-15  9:39   ` Peter Korsgaard
2010-06-15 11:54     ` Sascha Hauer
2010-06-17 13:17   ` Sascha Hauer
2010-06-17 13:26     ` Andy Pont
2010-06-17 14:14     ` Peter Korsgaard
2010-06-14  9:48 ` [PATCH 05/11] net: implement random_ether_addr Sascha Hauer
2010-06-14  9:48 ` [PATCH 06/11] net: use a random mac address if the current device does not have one Sascha Hauer
2010-06-14  9:48 ` [PATCH 07/11] add a generic default environment Sascha Hauer
2010-06-15  9:13   ` Uwe Kleine-König
2010-06-17 13:20   ` Sascha Hauer
2010-06-19 20:14     ` Uwe Kleine-König
2010-06-14  9:48 ` [PATCH 08/11] pcm038: use generic default env Sascha Hauer
2010-06-14  9:48 ` [PATCH 09/11] pcm043: " Sascha Hauer
2010-06-14  9:48 ` [PATCH 10/11] pcm037: " Sascha Hauer
2010-06-14  9:48 ` [PATCH 11/11] pca100: " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1276508921-3264-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox