* [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261
@ 2010-08-23 3:30 Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK Jean-Christophe PLAGNIOL-VILLARD
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:30 UTC (permalink / raw)
To: barebox
Hi Sascha,
this contain fix up and prepacation for adding at91rm9200 and at91sam9261
please pull
The following changes since commit c52f80cc89e559ade702486d03bb8bfe3113db6c:
Add missing include (2010-08-22 12:08:10 +0200)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git at91
Jean-Christophe PLAGNIOL-VILLARD (5):
mmccpu: fix typo in AT91_MAIN_CLOCK
dm9000: allow to specify that no srom is present
at91: rename clocksource.c -> at91sam926x_time.c
macb: introduce HAS_MACB configuration
at91: remove non used and obsolete at91rm9200 code
arch/arm/Kconfig | 5 -
arch/arm/Makefile | 1 -
arch/arm/boards/mmccpu/config.h | 2 +-
arch/arm/boards/scb9328/scb9328.c | 1 +
arch/arm/mach-at91/Kconfig | 2 +
arch/arm/mach-at91/Makefile | 6 +-
.../{clocksource.c => at91sam926x_time.c} | 0
arch/arm/mach-at91rm9200/Kconfig | 16 -
arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h | 762 --------------------
arch/arm/mach-at91rm9200/include/mach/hardware.h | 78 --
drivers/net/Kconfig | 5 +-
drivers/net/dm9000.c | 3 +-
include/dm9000.h | 1 +
13 files changed, 14 insertions(+), 868 deletions(-)
rename arch/arm/mach-at91/{clocksource.c => at91sam926x_time.c} (100%)
delete mode 100644 arch/arm/mach-at91rm9200/Kconfig
delete mode 100644 arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h
delete mode 100644 arch/arm/mach-at91rm9200/include/mach/hardware.h
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
@ 2010-08-23 3:33 ` Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 2/5] dm9000: allow to specify that no srom is present Jean-Christophe PLAGNIOL-VILLARD
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:33 UTC (permalink / raw)
To: barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/mmccpu/config.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boards/mmccpu/config.h b/arch/arm/boards/mmccpu/config.h
index 422ac09..c37d5eb 100644
--- a/arch/arm/boards/mmccpu/config.h
+++ b/arch/arm/boards/mmccpu/config.h
@@ -1,7 +1,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define AT91_M1IN_CLOCK 18432000
+#define AT91_MAIN_CLOCK 18432000
/* values */
#define MASTER_PLL_MUL 54
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/5] dm9000: allow to specify that no srom is present
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK Jean-Christophe PLAGNIOL-VILLARD
@ 2010-08-23 3:33 ` Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 3/5] at91: rename clocksource.c -> at91sam926x_time.c Jean-Christophe PLAGNIOL-VILLARD
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:33 UTC (permalink / raw)
To: barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/scb9328/scb9328.c | 1 +
drivers/net/dm9000.c | 3 ++-
include/dm9000.h | 1 +
3 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index e781393..3c04996 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -55,6 +55,7 @@ static struct dm9000_platform_data dm9000_data = {
.iobase = 0x16000000,
.iodata = 0x16000004,
.buswidth = DM9000_WIDTH_16,
+ .srom = 1;
};
static struct device_d dm9000_dev = {
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 2062c66..ab06735 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -498,8 +498,9 @@ static int dm9000_probe(struct device_d *dev)
edev->send = dm9000_eth_send;
edev->recv = dm9000_eth_rx;
edev->halt = dm9000_eth_halt;
- edev->get_ethaddr = dm9000_get_ethaddr;
edev->set_ethaddr = dm9000_set_ethaddr;
+ if (pdata->srom)
+ edev->get_ethaddr = dm9000_get_ethaddr;
/* RESET device */
dm9000_reset(priv);
diff --git a/include/dm9000.h b/include/dm9000.h
index 3cc5235..b4a04b1 100644
--- a/include/dm9000.h
+++ b/include/dm9000.h
@@ -10,6 +10,7 @@ struct dm9000_platform_data {
unsigned long iobase;
unsigned long iodata;
int buswidth;
+ int srom;
};
#endif /* __DM9000_H__ */
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/5] at91: rename clocksource.c -> at91sam926x_time.c
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 2/5] dm9000: allow to specify that no srom is present Jean-Christophe PLAGNIOL-VILLARD
@ 2010-08-23 3:33 ` Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 4/5] macb: introduce HAS_MACB configuration Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 5/5] at91: remove non used and obsolete at91rm9200 code Jean-Christophe PLAGNIOL-VILLARD
4 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:33 UTC (permalink / raw)
To: barebox
preparation to move the rm9200 to the same api as other at91
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/Makefile | 6 +-
arch/arm/mach-at91/at91sam926x_time.c | 85 +++++++++++++++++++++++++++++++++
arch/arm/mach-at91/clocksource.c | 85 ---------------------------------
3 files changed, 88 insertions(+), 88 deletions(-)
create mode 100644 arch/arm/mach-at91/at91sam926x_time.c
delete mode 100644 arch/arm/mach-at91/clocksource.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 0f55883..2878b04 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,7 +1,7 @@
-obj-y += clock.o clocksource.o gpio.o
+obj-y += clock.o gpio.o
obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
# CPU-specific support
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
new file mode 100644
index 0000000..84df1a1
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <asm/hardware.h>
+#include <mach/at91_pit.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/io.h>
+#include <asm/io.h>
+
+uint64_t at91sam9_clocksource_read(void)
+{
+ return at91_sys_read(AT91_PIT_PIIR);
+}
+
+static struct clocksource cs = {
+ .read = at91sam9_clocksource_read,
+ .mask = 0xffffffff,
+ .shift = 10,
+};
+
+static int clocksource_init (void)
+{
+ /*
+ * Enable PITC Clock
+ * The clock is already enabled for system controller in boot
+ */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+
+ /* Enable PITC */
+ at91_sys_write(AT91_PIT_MR, 0xfffff | AT91_PIT_PITEN);
+
+ cs.mult = clocksource_hz2mult(1000000 * 6, cs.shift);
+
+ init_clock(&cs);
+
+ return 0;
+}
+
+core_initcall(clocksource_init);
+
+/*
+ * Reset the cpu through the reset controller
+ */
+void __noreturn reset_cpu (unsigned long ignored)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY |
+ AT91_RSTC_PROCRST |
+ AT91_RSTC_PERRST);
+
+ /* Not reached */
+ while (1);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-at91/clocksource.c b/arch/arm/mach-at91/clocksource.c
deleted file mode 100644
index 84df1a1..0000000
--- a/arch/arm/mach-at91/clocksource.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <init.h>
-#include <clock.h>
-#include <asm/hardware.h>
-#include <mach/at91_pit.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-#include <mach/io.h>
-#include <asm/io.h>
-
-uint64_t at91sam9_clocksource_read(void)
-{
- return at91_sys_read(AT91_PIT_PIIR);
-}
-
-static struct clocksource cs = {
- .read = at91sam9_clocksource_read,
- .mask = 0xffffffff,
- .shift = 10,
-};
-
-static int clocksource_init (void)
-{
- /*
- * Enable PITC Clock
- * The clock is already enabled for system controller in boot
- */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-
- /* Enable PITC */
- at91_sys_write(AT91_PIT_MR, 0xfffff | AT91_PIT_PITEN);
-
- cs.mult = clocksource_hz2mult(1000000 * 6, cs.shift);
-
- init_clock(&cs);
-
- return 0;
-}
-
-core_initcall(clocksource_init);
-
-/*
- * Reset the cpu through the reset controller
- */
-void __noreturn reset_cpu (unsigned long ignored)
-{
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY |
- AT91_RSTC_PROCRST |
- AT91_RSTC_PERRST);
-
- /* Not reached */
- while (1);
-}
-EXPORT_SYMBOL(reset_cpu);
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 4/5] macb: introduce HAS_MACB configuration
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
` (2 preceding siblings ...)
2010-08-23 3:33 ` [PATCH 3/5] at91: rename clocksource.c -> at91sam926x_time.c Jean-Christophe PLAGNIOL-VILLARD
@ 2010-08-23 3:33 ` Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 5/5] at91: remove non used and obsolete at91rm9200 code Jean-Christophe PLAGNIOL-VILLARD
4 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:33 UTC (permalink / raw)
To: barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/Kconfig | 2 ++
drivers/net/Kconfig | 5 ++++-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 923ce0b..99d0f4d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -18,11 +18,13 @@ choice
config ARCH_AT91SAM9260
bool "AT91SAM9260"
select CPU_ARM926T
+ select HAS_MACB
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
select MACH_HAS_LOWLEVEL_INIT
+ select HAS_MACB
endchoice
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0955562..a106a7b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -4,6 +4,9 @@ config HAS_CS8900
config HAS_DM9000
bool
+config HAS_MACB
+ bool
+
config HAS_AT91_ETHER
bool
@@ -71,7 +74,7 @@ config DRIVER_NET_EP93XX
config DRIVER_NET_MACB
bool "macb Ethernet driver"
- depends on ARCH_AT91
+ depends on HAS_MACB
select MIIPHY
config DRIVER_NET_TAP
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 5/5] at91: remove non used and obsolete at91rm9200 code
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
` (3 preceding siblings ...)
2010-08-23 3:33 ` [PATCH 4/5] macb: introduce HAS_MACB configuration Jean-Christophe PLAGNIOL-VILLARD
@ 2010-08-23 3:33 ` Jean-Christophe PLAGNIOL-VILLARD
4 siblings, 0 replies; 6+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-08-23 3:33 UTC (permalink / raw)
To: barebox
this will be re-add as mach-at91
for now on keep the net driver which will be updated to new API
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/Kconfig | 5 -
arch/arm/Makefile | 1 -
arch/arm/mach-at91rm9200/Kconfig | 16 -
arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h | 762 --------------------
arch/arm/mach-at91rm9200/include/mach/hardware.h | 78 --
5 files changed, 0 insertions(+), 862 deletions(-)
delete mode 100644 arch/arm/mach-at91rm9200/Kconfig
delete mode 100644 arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h
delete mode 100644 arch/arm/mach-at91rm9200/include/mach/hardware.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 82dbfda..945528c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -30,10 +30,6 @@ config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
- select CPU_ARM920T
-
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -65,7 +61,6 @@ endchoice
source arch/arm/common/Kconfig
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
-source arch/arm/mach-at91rm9200/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-netx/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4827fe9..e542c03 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -39,7 +39,6 @@ CPPFLAGS += $(CFLAGS_ABI) $(arch-y) $(tune-y)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
-machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
deleted file mode 100644
index c062097..0000000
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if ARCH_AT91RM9200
-
-config ARCH_TEXT_BASE
- hex
-
-config BOARDINFO
-
-comment "Atmel AT91RM9200 System-on-Chip"
-
-choice
-
- prompt "AT91RM9200 Board Type"
-
-endchoice
-
-endif
diff --git a/arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h b/arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h
deleted file mode 100644
index 97d4704..0000000
--- a/arch/arm/mach-at91rm9200/include/mach/AT91RM9200.h
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * (C) Copyright 2003
- * AT91RM9200 definitions
- * Author : ATMEL AT91 application group
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-typedef volatile unsigned int AT91_REG; /* Hardware register definition */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */
-/******************************************************************************/
-typedef struct _AT91S_TC
-{
- AT91_REG TC_CCR; /* Channel Control Register */
- AT91_REG TC_CMR; /* Channel Mode Register */
- AT91_REG Reserved0[2]; /* */
- AT91_REG TC_CV; /* Counter Value */
- AT91_REG TC_RA; /* Register A */
- AT91_REG TC_RB; /* Register B */
- AT91_REG TC_RC; /* Register C */
- AT91_REG TC_SR; /* Status Register */
- AT91_REG TC_IER; /* Interrupt Enable Register */
- AT91_REG TC_IDR; /* Interrupt Disable Register */
- AT91_REG TC_IMR; /* Interrupt Mask Register */
-} AT91S_TC, *AT91PS_TC;
-
-#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
-#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
-#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
-#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
-#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */
-#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
-#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
-#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
-#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
-#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
-#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
-#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
-#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
-#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Usart */
-/******************************************************************************/
-typedef struct _AT91S_USART
-{
- AT91_REG US_CR; /* Control Register */
- AT91_REG US_MR; /* Mode Register */
- AT91_REG US_IER; /* Interrupt Enable Register */
- AT91_REG US_IDR; /* Interrupt Disable Register */
- AT91_REG US_IMR; /* Interrupt Mask Register */
- AT91_REG US_CSR; /* Channel Status Register */
- AT91_REG US_RHR; /* Receiver Holding Register */
- AT91_REG US_THR; /* Transmitter Holding Register */
- AT91_REG US_BRGR; /* Baud Rate Generator Register */
- AT91_REG US_RTOR; /* Receiver Time-out Register */
- AT91_REG US_TTGR; /* Transmitter Time-guard Register */
- AT91_REG Reserved0[5]; /* */
- AT91_REG US_FIDI; /* FI_DI_Ratio Register */
- AT91_REG US_NER; /* Nb Errors Register */
- AT91_REG US_XXR; /* XON_XOFF Register */
- AT91_REG US_IF; /* IRDA_FILTER Register */
- AT91_REG Reserved1[44]; /* */
- AT91_REG US_RPR; /* Receive Pointer Register */
- AT91_REG US_RCR; /* Receive Counter Register */
- AT91_REG US_TPR; /* Transmit Pointer Register */
- AT91_REG US_TCR; /* Transmit Counter Register */
- AT91_REG US_RNPR; /* Receive Next Pointer Register */
- AT91_REG US_RNCR; /* Receive Next Counter Register */
- AT91_REG US_TNPR; /* Transmit Next Pointer Register */
- AT91_REG US_TNCR; /* Transmit Next Counter Register */
- AT91_REG US_PTCR; /* PDC Transfer Control Register */
- AT91_REG US_PTSR; /* PDC Transfer Status Register */
-} AT91S_USART, *AT91PS_USART;
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Clock Generator Controler */
-/******************************************************************************/
-typedef struct _AT91S_CKGR
-{
- AT91_REG CKGR_MOR; /* Main Oscillator Register */
- AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
- AT91_REG CKGR_PLLAR; /* PLL A Register */
- AT91_REG CKGR_PLLBR; /* PLL B Register */
-} AT91S_CKGR, *AT91PS_CKGR;
-
-/* -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- */
-#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) /* (CKGR) Main Oscillator Enable */
-#define AT91C_CKGR_OSCTEST ((unsigned int) 0x1 << 1) /* (CKGR) Oscillator Test */
-#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) /* (CKGR) Main Oscillator Start-up Time */
-
-/* -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- */
-#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) /* (CKGR) Main Clock Frequency */
-#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) /* (CKGR) Main Clock Ready */
-
-/* -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- */
-#define AT91C_CKGR_DIVA ((unsigned int) 0xFF << 0) /* (CKGR) Divider Selected */
-#define AT91C_CKGR_DIVA_0 ((unsigned int) 0x0) /* (CKGR) Divider output is 0 */
-#define AT91C_CKGR_DIVA_BYPASS ((unsigned int) 0x1) /* (CKGR) Divider is bypassed */
-#define AT91C_CKGR_PLLACOUNT ((unsigned int) 0x3F << 8) /* (CKGR) PLL A Counter */
-#define AT91C_CKGR_OUTA ((unsigned int) 0x3 << 14) /* (CKGR) PLL A Output Frequency Range */
-#define AT91C_CKGR_OUTA_0 ((unsigned int) 0x0 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_1 ((unsigned int) 0x1 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_2 ((unsigned int) 0x2 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_3 ((unsigned int) 0x3 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_MULA ((unsigned int) 0x7FF << 16) /* (CKGR) PLL A Multiplier */
-#define AT91C_CKGR_SRCA ((unsigned int) 0x1 << 29) /* (CKGR) PLL A Source */
-
-/* -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- */
-#define AT91C_CKGR_DIVB ((unsigned int) 0xFF << 0) /* (CKGR) Divider Selected */
-#define AT91C_CKGR_DIVB_0 ((unsigned int) 0x0) /* (CKGR) Divider output is 0 */
-#define AT91C_CKGR_DIVB_BYPASS ((unsigned int) 0x1) /* (CKGR) Divider is bypassed */
-#define AT91C_CKGR_PLLBCOUNT ((unsigned int) 0x3F << 8) /* (CKGR) PLL B Counter */
-#define AT91C_CKGR_OUTB ((unsigned int) 0x3 << 14) /* (CKGR) PLL B Output Frequency Range */
-#define AT91C_CKGR_OUTB_0 ((unsigned int) 0x0 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_1 ((unsigned int) 0x1 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_2 ((unsigned int) 0x2 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_3 ((unsigned int) 0x3 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_MULB ((unsigned int) 0x7FF << 16) /* (CKGR) PLL B Multiplier */
-#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) /* (CKGR) Divider for USB Ports */
-#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) /* (CKGR) PLL Use */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */
-/******************************************************************************/
-typedef struct _AT91S_PIO
-{
- AT91_REG PIO_PER; /* PIO Enable Register */
- AT91_REG PIO_PDR; /* PIO Disable Register */
- AT91_REG PIO_PSR; /* PIO Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PIO_OER; /* Output Enable Register */
- AT91_REG PIO_ODR; /* Output Disable Registerr */
- AT91_REG PIO_OSR; /* Output Status Register */
- AT91_REG Reserved1[1]; /* */
- AT91_REG PIO_IFER; /* Input Filter Enable Register */
- AT91_REG PIO_IFDR; /* Input Filter Disable Register */
- AT91_REG PIO_IFSR; /* Input Filter Status Register */
- AT91_REG Reserved2[1]; /* */
- AT91_REG PIO_SODR; /* Set Output Data Register */
- AT91_REG PIO_CODR; /* Clear Output Data Register */
- AT91_REG PIO_ODSR; /* Output Data Status Register */
- AT91_REG PIO_PDSR; /* Pin Data Status Register */
- AT91_REG PIO_IER; /* Interrupt Enable Register */
- AT91_REG PIO_IDR; /* Interrupt Disable Register */
- AT91_REG PIO_IMR; /* Interrupt Mask Register */
- AT91_REG PIO_ISR; /* Interrupt Status Register */
- AT91_REG PIO_MDER; /* Multi-driver Enable Register */
- AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
- AT91_REG PIO_MDSR; /* Multi-driver Status Register */
- AT91_REG Reserved3[1]; /* */
- AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
- AT91_REG PIO_PPUER; /* Pull-up Enable Register */
- AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
- AT91_REG Reserved4[1]; /* */
- AT91_REG PIO_ASR; /* Select A Register */
- AT91_REG PIO_BSR; /* Select B Register */
- AT91_REG PIO_ABSR; /* AB Select Status Register */
- AT91_REG Reserved5[9]; /* */
- AT91_REG PIO_OWER; /* Output Write Enable Register */
- AT91_REG PIO_OWDR; /* Output Write Disable Register */
- AT91_REG PIO_OWSR; /* Output Write Status Register */
-} AT91S_PIO, *AT91PS_PIO;
-
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Debug Unit */
-/******************************************************************************/
-typedef struct _AT91S_DBGU
-{
- AT91_REG DBGU_CR; /* Control Register */
- AT91_REG DBGU_MR; /* Mode Register */
- AT91_REG DBGU_IER; /* Interrupt Enable Register */
- AT91_REG DBGU_IDR; /* Interrupt Disable Register */
- AT91_REG DBGU_IMR; /* Interrupt Mask Register */
- AT91_REG DBGU_CSR; /* Channel Status Register */
- AT91_REG DBGU_RHR; /* Receiver Holding Register */
- AT91_REG DBGU_THR; /* Transmitter Holding Register */
- AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
- AT91_REG Reserved0[7]; /* */
- AT91_REG DBGU_C1R; /* Chip ID1 Register */
- AT91_REG DBGU_C2R; /* Chip ID2 Register */
- AT91_REG DBGU_FNTR; /* Force NTRST Register */
- AT91_REG Reserved1[45]; /* */
- AT91_REG DBGU_RPR; /* Receive Pointer Register */
- AT91_REG DBGU_RCR; /* Receive Counter Register */
- AT91_REG DBGU_TPR; /* Transmit Pointer Register */
- AT91_REG DBGU_TCR; /* Transmit Counter Register */
- AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
- AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
- AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
- AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
- AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
- AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
-} AT91S_DBGU, *AT91PS_DBGU;
-
-/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
-#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) /* (DBGU) RXRDY Interrupt */
-#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) /* (DBGU) TXRDY Interrupt */
-#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) /* (DBGU) End of Receive Transfer Interrupt */
-#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) /* (DBGU) End of Transmit Interrupt */
-#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) /* (DBGU) Overrun Interrupt */
-#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) /* (DBGU) Framing Error Interrupt */
-#define AT91C_US_PARE ((unsigned int) 0x1 << 7) /* (DBGU) Parity Error Interrupt */
-#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) /* (DBGU) TXEMPTY Interrupt */
-#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) /* (DBGU) TXBUFE Interrupt */
-#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) /* (DBGU) RXBUFF Interrupt */
-#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) /* (DBGU) COMM_TX Interrupt */
-#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) /* (DBGU) COMM_RX Interrupt */
-
-/* -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- */
-#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) /* (DBGU) Reset Receiver */
-#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) /* (DBGU) Reset Transmitter */
-#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) /* (DBGU) Receiver Enable */
-#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) /* (DBGU) Receiver Disable */
-#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) /* (DBGU) Transmitter Enable */
-#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) /* (DBGU) Transmitter Disable */
-
-#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) /* (USART) Clock */
-#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) /* (USART) Character Length: 8 bits */
-#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */
-#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */
-/******************************************************************************/
-typedef struct _AT91S_SMC2
-{
- AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
-} AT91S_SMC2, *AT91PS_SMC2;
-
-/* -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- */
-#define AT91C_SMC2_NWS ((unsigned int) 0x7F << 0) /* (SMC2) Number of Wait States */
-#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) /* (SMC2) Wait State Enable */
-#define AT91C_SMC2_TDF ((unsigned int) 0xF << 8) /* (SMC2) Data Float Time */
-#define AT91C_SMC2_BAT ((unsigned int) 0x1 << 12) /* (SMC2) Byte Access Type */
-#define AT91C_SMC2_DBW ((unsigned int) 0x1 << 13) /* (SMC2) Data Bus Width */
-#define AT91C_SMC2_DBW_16 ((unsigned int) 0x1 << 13) /* (SMC2) 16-bit. */
-#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) /* (SMC2) 8-bit. */
-#define AT91C_SMC2_DRP ((unsigned int) 0x1 << 15) /* (SMC2) Data Read Protocol */
-#define AT91C_SMC2_ACSS ((unsigned int) 0x3 << 16) /* (SMC2) Address to Chip Select Setup */
-#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) /* (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. */
-#define AT91C_SMC2_ACSS_1_CYCLE ((unsigned int) 0x1 << 16) /* (SMC2) One cycle less at the beginning and the end of the access. */
-#define AT91C_SMC2_ACSS_2_CYCLES ((unsigned int) 0x2 << 16) /* (SMC2) Two cycles less at the beginning and the end of the access. */
-#define AT91C_SMC2_ACSS_3_CYCLES ((unsigned int) 0x3 << 16) /* (SMC2) Three cycles less at the beginning and the end of the access. */
-#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) /* (SMC2) Read and Write Signal Setup Time */
-#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) /* (SMC2) Read and Write Signal Hold Time */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Power Management Controler */
-/******************************************************************************/
-typedef struct _AT91S_PMC
-{
- AT91_REG PMC_SCER; /* System Clock Enable Register */
- AT91_REG PMC_SCDR; /* System Clock Disable Register */
- AT91_REG PMC_SCSR; /* System Clock Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
- AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
- AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
- AT91_REG Reserved1[5]; /* */
- AT91_REG PMC_MCKR; /* Master Clock Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
- AT91_REG PMC_IER; /* Interrupt Enable Register */
- AT91_REG PMC_IDR; /* Interrupt Disable Register */
- AT91_REG PMC_SR; /* Status Register */
- AT91_REG PMC_IMR; /* Interrupt Mask Register */
-} AT91S_PMC, *AT91PS_PMC;
-
-/*------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------*/
-#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) /* (PMC) Processor Clock */
-#define AT91C_PMC_UDP ((unsigned int) 0x1 << 1) /* (PMC) USB Device Port Clock */
-#define AT91C_PMC_MCKUDP ((unsigned int) 0x1 << 2) /* (PMC) USB Device Port Master Clock Automatic Disable on Suspend */
-#define AT91C_PMC_UHP ((unsigned int) 0x1 << 4) /* (PMC) USB Host Port Clock */
-#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK4 ((unsigned int) 0x1 << 12) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK5 ((unsigned int) 0x1 << 13) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK6 ((unsigned int) 0x1 << 14) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK7 ((unsigned int) 0x1 << 15) /* (PMC) Programmable Clock Output */
-/*-------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register ------*/
-/*-------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------*/
-/*-------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------*/
-#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) /* (PMC) Programmable Clock Selection */
-#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) /* (PMC) Slow Clock is selected */
-#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) /* (PMC) Main Clock is selected */
-#define AT91C_PMC_CSS_PLLA_CLK ((unsigned int) 0x2) /* (PMC) Clock from PLL A is selected */
-#define AT91C_PMC_CSS_PLLB_CLK ((unsigned int) 0x3) /* (PMC) Clock from PLL B is selected */
-#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) /* (PMC) Programmable Clock Prescaler */
-#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) /* (PMC) Selected clock */
-#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) /* (PMC) Selected clock divided by 2 */
-#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) /* (PMC) Selected clock divided by 4 */
-#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) /* (PMC) Selected clock divided by 8 */
-#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) /* (PMC) Selected clock divided by 16 */
-#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) /* (PMC) Selected clock divided by 32 */
-#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) /* (PMC) Selected clock divided by 64 */
-#define AT91C_PMC_MDIV ((unsigned int) 0x3 << 8) /* (PMC) Master Clock Division */
-#define AT91C_PMC_MDIV_1 ((unsigned int) 0x0 << 8) /* (PMC) The master clock and the processor clock are the same */
-#define AT91C_PMC_MDIV_2 ((unsigned int) 0x1 << 8) /* (PMC) The processor clock is twice as fast as the master clock */
-#define AT91C_PMC_MDIV_3 ((unsigned int) 0x2 << 8) /* (PMC) The processor clock is three times faster than the master clock */
-#define AT91C_PMC_MDIV_4 ((unsigned int) 0x3 << 8) /* (PMC) The processor clock is four times faster than the master clock */
-/*------ PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------*/
-/*------ PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------*/
-#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) /* (PMC) MOSC Status/Enable/Disable/Mask */
-#define AT91C_PMC_LOCKA ((unsigned int) 0x1 << 1) /* (PMC) PLL A Status/Enable/Disable/Mask */
-#define AT91C_PMC_LOCKB ((unsigned int) 0x1 << 2) /* (PMC) PLL B Status/Enable/Disable/Mask */
-#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) /* (PMC) MCK_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) /* (PMC) PCK0_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) /* (PMC) PCK1_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) /* (PMC) PCK2_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) /* (PMC) PCK3_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK4RDY ((unsigned int) 0x1 << 12) /* (PMC) PCK4_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK5RDY ((unsigned int) 0x1 << 13) /* (PMC) PCK5_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK6RDY ((unsigned int) 0x1 << 14) /* (PMC) PCK6_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK7RDY ((unsigned int) 0x1 << 15) /* (PMC) PCK7_RDY Status/Enable/Disable/Mask */
-/*---- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------*/
-/*-------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------*/
-/*-------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------*/
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Ethernet MAC */
-/******************************************************************************/
-typedef struct _AT91S_EMAC
-{
- AT91_REG EMAC_CTL; /* Network Control Register */
- AT91_REG EMAC_CFG; /* Network Configuration Register */
- AT91_REG EMAC_SR; /* Network Status Register */
- AT91_REG EMAC_TAR; /* Transmit Address Register */
- AT91_REG EMAC_TCR; /* Transmit Control Register */
- AT91_REG EMAC_TSR; /* Transmit Status Register */
- AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
- AT91_REG Reserved0[1]; /* */
- AT91_REG EMAC_RSR; /* Receive Status Register */
- AT91_REG EMAC_ISR; /* Interrupt Status Register */
- AT91_REG EMAC_IER; /* Interrupt Enable Register */
- AT91_REG EMAC_IDR; /* Interrupt Disable Register */
- AT91_REG EMAC_IMR; /* Interrupt Mask Register */
- AT91_REG EMAC_MAN; /* PHY Maintenance Register */
- AT91_REG Reserved1[2]; /* */
- AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
- AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
- AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
- AT91_REG EMAC_OK; /* Frames Received OK Register */
- AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
- AT91_REG EMAC_ALE; /* Alignment Error Register */
- AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
- AT91_REG EMAC_LCOL; /* Late Collision Register */
- AT91_REG EMAC_ECOL; /* Excessive Collision Register */
- AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
- AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
- AT91_REG EMAC_CDE; /* Code Error Register */
- AT91_REG EMAC_ELR; /* Excessive Length Error Register */
- AT91_REG EMAC_RJB; /* Receive Jabber Register */
- AT91_REG EMAC_USF; /* Undersize Frame Register */
- AT91_REG EMAC_SQEE; /* SQE Test Error Register */
- AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
- AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
- AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
- AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
- AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
- AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
- AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
- AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
- AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
- AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
-} AT91S_EMAC, *AT91PS_EMAC;
-
-/* -------- EMAC_CTL : (EMAC Offset: 0x0) -------- */
-#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) /* (EMAC) Loopback. Optional. When set, loopback signal is at high level. */
-#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) /* (EMAC) Loopback local. */
-#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) /* (EMAC) Receive enable. */
-#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) /* (EMAC) Transmit enable. */
-#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) /* (EMAC) Management port enable. */
-#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) /* (EMAC) Clear statistics registers. */
-#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) /* (EMAC) Increment statistics registers. */
-#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) /* (EMAC) Write enable for statistics registers. */
-#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) /* (EMAC) Back pressure. */
-
-/* -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- */
-#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) /* (EMAC) Speed. */
-#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) /* (EMAC) Full duplex. */
-#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) /* (EMAC) Bit rate. */
-#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) /* (EMAC) Copy all frames. */
-#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) /* (EMAC) No broadcast. */
-#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) /* (EMAC) Multicast hash enable */
-#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) /* (EMAC) Unicast hash enable. */
-#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) /* (EMAC) Receive 1522 bytes. */
-#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) /* (EMAC) External address match enable. */
-#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) /* (EMAC) */
-#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) /* (EMAC) HCLK divided by 8 */
-#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) /* (EMAC) HCLK divided by 16 */
-#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) /* (EMAC) HCLK divided by 32 */
-#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) /* (EMAC) HCLK divided by 64 */
-#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) /* (EMAC) */
-#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) /* (EMAC) */
-
-/* -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- */
-#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) /* (EMAC) */
-
-/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- */
-#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) /* (EMAC) */
-#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) /* (EMAC) */
-
-/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- */
-#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) /* (EMAC) */
-#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) /* (EMAC) */
-#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) /* (EMAC) */
-#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) /* (EMAC) */
-#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) /* (EMAC) */
-
-/* -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- */
-#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */
-
-/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- */
-#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) /* (EMAC) */
-#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) /* (EMAC) */
-#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) /* (EMAC) */
-#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) /* (EMAC) */
-#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) /* (EMAC) */
-#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) /* (EMAC) */
-#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) /* (EMAC) */
-#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) /* (EMAC) */
-#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) /* (EMAC) */
-#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) /* (EMAC) */
-
-/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- */
-/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- */
-/* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */
-/* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */
-#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) /* (EMAC) */
-#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) /* (EMAC) */
-#define AT91C_EMAC_CODE_802_3 ((unsigned int) 0x2 << 16) /* (EMAC) Write Operation */
-#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) /* (EMAC) */
-#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) /* (EMAC) */
-#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) /* (EMAC) */
-#define AT91C_EMAC_RW_R ((unsigned int) 0x2 << 28) /* (EMAC) Read Operation */
-#define AT91C_EMAC_RW_W ((unsigned int) 0x1 << 28) /* (EMAC) Write Operation */
-#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) /* (EMAC) */
-#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) /* (EMAC) */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */
-/******************************************************************************/
-typedef struct _AT91S_SPI
-{
- AT91_REG SPI_CR; /* Control Register */
- AT91_REG SPI_MR; /* Mode Register */
- AT91_REG SPI_RDR; /* Receive Data Register */
- AT91_REG SPI_TDR; /* Transmit Data Register */
- AT91_REG SPI_SR; /* Status Register */
- AT91_REG SPI_IER; /* Interrupt Enable Register */
- AT91_REG SPI_IDR; /* Interrupt Disable Register */
- AT91_REG SPI_IMR; /* Interrupt Mask Register */
- AT91_REG Reserved0[4]; /* */
- AT91_REG SPI_CSR[4]; /* Chip Select Register */
- AT91_REG Reserved1[48]; /* */
- AT91_REG SPI_RPR; /* Receive Pointer Register */
- AT91_REG SPI_RCR; /* Receive Counter Register */
- AT91_REG SPI_TPR; /* Transmit Pointer Register */
- AT91_REG SPI_TCR; /* Transmit Counter Register */
- AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
- AT91_REG SPI_RNCR; /* Receive Next Counter Register */
- AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
- AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
- AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
- AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
-} AT91S_SPI, *AT91PS_SPI;
-
-/* -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- */
-#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) /* (SPI) SPI Enable */
-#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) /* (SPI) SPI Disable */
-#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) /* (SPI) SPI Software reset */
-
-/* -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- */
-#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) /* (SPI) Master/Slave Mode */
-#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) /* (SPI) Peripheral Select */
-#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) /* (SPI) Fixed Peripheral Select */
-#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) /* (SPI) Variable Peripheral Select */
-#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) /* (SPI) Chip Select Decode */
-#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) /* (SPI) Clock Selection */
-#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) /* (SPI) Mode Fault Detection */
-#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) /* (SPI) Clock Selection */
-#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select */
-#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Chip Selects */
-
-/* -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- */
-#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) /* (SPI) Receive Data */
-#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
-
-/* -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- */
-#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) /* (SPI) Transmit Data */
-#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
-
-/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */
-#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) /* (SPI) Receive Data Register Full */
-#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) /* (SPI) Transmit Data Register Empty */
-#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) /* (SPI) Mode Fault Error */
-#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) /* (SPI) Overrun Error Status */
-#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) /* (SPI) End of Receiver Transfer */
-#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) /* (SPI) End of Receiver Transfer */
-#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) /* (SPI) RXBUFF Interrupt */
-#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) /* (SPI) TXBUFE Interrupt */
-#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) /* (SPI) Enable Status */
-
-/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
-/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
-/* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */
-/* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */
-#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) /* (SPI) Clock Polarity */
-#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) /* (SPI) Clock Phase */
-#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) /* (SPI) Bits Per Transfer */
-#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) /* (SPI) 8 Bits Per transfer */
-#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) /* (SPI) 9 Bits Per transfer */
-#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) /* (SPI) 10 Bits Per transfer */
-#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) /* (SPI) 11 Bits Per transfer */
-#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) /* (SPI) 12 Bits Per transfer */
-#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) /* (SPI) 13 Bits Per transfer */
-#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) /* (SPI) 14 Bits Per transfer */
-#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) /* (SPI) 15 Bits Per transfer */
-#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) /* (SPI) 16 Bits Per transfer */
-#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) /* (SPI) Serial Clock Baud Rate */
-#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */
-#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */
-
-/******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */
-/******************************************************************************/
-typedef struct _AT91S_PDC
-{
- AT91_REG PDC_RPR; /* Receive Pointer Register */
- AT91_REG PDC_RCR; /* Receive Counter Register */
- AT91_REG PDC_TPR; /* Transmit Pointer Register */
- AT91_REG PDC_TCR; /* Transmit Counter Register */
- AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
- AT91_REG PDC_RNCR; /* Receive Next Counter Register */
- AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
- AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
- AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
- AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
-} AT91S_PDC, *AT91PS_PDC;
-
-/* -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- */
-#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) /* (PDC) Receiver Transfer Enable */
-#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) /* (PDC) Receiver Transfer Disable */
-#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) /* (PDC) Transmitter Transfer Enable */
-#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) /* (PDC) Transmitter Transfer Disable */
-/* -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- */
-
-/* ========== Register definition ==================================== */
-#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) /* (SPI) Chip Select Register */
-#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) /* (PIOA) PIO Enable Register */
-#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) /* (PIOA) PIO Disable Register */
-#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) /* (PIOA) PIO Status Register */
-#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) /* (PIOA) PIO Output Enable Register */
-#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) /* (PIOA) PIO Output Disable Register */
-#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) /* (PIOA) PIO Output Status Register */
-#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) /* (PIOA) PIO Glitch Input Filter Enable Register */
-#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) /* (PIOA) PIO Glitch Input Filter Disable Register */
-#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) /* (PIOA) PIO Glitch Input Filter Status Register */
-#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) /* (PIOA) PIO Set Output Data Register */
-#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) /* (PIOA) PIO Clear Output Data Register */
-#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) /* (PIOA) PIO Output Data Status Register */
-#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) /* (PIOA) PIO Pin Data Status Register */
-#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) /* (PIOA) PIO Interrupt Enable Register */
-#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) /* (PIOA) PIO Interrupt Disable Register */
-#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) /* (PIOA) PIO Interrupt Mask Register */
-#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) /* (PIOA) PIO Interrupt Status Register */
-#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) /* (PIOA) PIO Multi-drive Enable Register */
-#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) /* (PIOA) PIO Multi-drive Disable Register */
-#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) /* (PIOA) PIO Multi-drive Status Register */
-#define AT91C_PIOA_PUDR ((AT91_REG *) 0xFFFFF460) /* (PIOA) PIO Pull-up Disable Register */
-#define AT91C_PIOA_PUER ((AT91_REG *) 0xFFFFF464) /* (PIOA) PIO Pull-up Enable Register */
-#define AT91C_PIOA_PUSR ((AT91_REG *) 0xFFFFF468) /* (PIOA) PIO Pull-up Status Register */
-#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) /* (PIOA) PIO Peripheral A Select Register */
-#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) /* (PIOA) PIO Peripheral B Select Register */
-#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) /* (PIOA) PIO Peripheral AB Select Register */
-#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) /* (PIOA) PIO Output Write Enable Register */
-#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) /* (PIOA) PIO Output Write Disable Register */
-#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) /* (PIOA) PIO Output Write Status Register */
-#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */
-
-#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */
-#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) /* Pin Controlled by PC0 */
-#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) /* Burst Flash Clock */
-#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) /* DBGU Debug Receive Data */
-#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) /* Pin Controlled by PA31 */
-#define AT91C_PA25_TWD ((unsigned int) 1 << 25)
-#define AT91C_PA26_TWCK ((unsigned int) 1 << 26)
-#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) /* DBGU Debug Transmit Data */
-#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) /* Pin Controlled by PA17 */
-#define AT91C_PA17_TXD0 AT91C_PIO_PA17 /* USART0 Transmit Data */
-#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) /* Pin Controlled by PA18 */
-#define AT91C_PA18_RXD0 AT91C_PIO_PA18 /* USART0 Receive Data */
-#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) /* Pin Controlled by PB20 */
-#define AT91C_PB20_RXD1 AT91C_PIO_PB20 /* USART1 Receive Data */
-#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) /* Pin Controlled by PB21 */
-#define AT91C_PB21_TXD1 AT91C_PIO_PB21 /* USART1 Transmit Data */
-
-#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */
-#define AT91C_ID_PIOA ((unsigned int) 2) /* PIO port A */
-#define AT91C_ID_PIOB ((unsigned int) 3) /* PIO port B */
-#define AT91C_ID_PIOC ((unsigned int) 4) /* PIO port C */
-#define AT91C_ID_USART0 ((unsigned int) 6) /* USART 0 */
-#define AT91C_ID_USART1 ((unsigned int) 7) /* USART 1 */
-#define AT91C_ID_TWI ((unsigned int) 12) /* Two Wire Interface */
-#define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */
-#define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */
-#define AT91C_ID_UHP ((unsigned int) 23) /* OHCI USB Host Port */
-#define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */
-
-#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */
-#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */
-#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) /* Pin Controlled by PC3 */
-#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) /* Burst Flash Address Advance / SmartMedia Write Enable */
-#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) /* Pin Controlled by PC2 */
-#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) /* Burst Flash Address Valid */
-#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB1 */
-
-#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) /* Pin Controlled by PA23 */
-#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) /* USART 2 Transmit Data */
-
-#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) /* Pin Controlled by PA0 */
-#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) /* SPI Master In Slave */
-#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) /* Pin Controlled by PA1 */
-#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) /* SPI Master Out Slave */
-#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) /* Pin Controlled by PA2 */
-#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) /* SPI Serial Clock */
-#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) /* Pin Controlled by PA3 */
-#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) /* SPI Peripheral Chip Select 0 */
-#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) /* Pin Controlled by PA4 */
-#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) /* SPI Peripheral Chip Select 1 */
-#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) /* Pin Controlled by PA5 */
-#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) /* SPI Peripheral Chip Select 2 */
-#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) /* Pin Controlled by PA6 */
-#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) /* SPI Peripheral Chip Select 3 */
-
-#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) /* Pin Controlled by PA16 */
-#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) /* Ethernet MAC Management Data Input/Output */
-#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) /* Pin Controlled by PA15 */
-#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) /* Ethernet MAC Management Data Clock */
-#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) /* Pin Controlled by PA14 */
-#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) /* Ethernet MAC Receive Error */
-#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) /* Pin Controlled by PA13 */
-#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) /* Ethernet MAC Receive Data 1 */
-#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) /* Pin Controlled by PA12 */
-#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) /* Ethernet MAC Receive Data 0 */
-#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) /* Pin Controlled by PA11 */
-#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) /* Ethernet MAC Carrier Sense/Carrier Sense and Data Valid */
-#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) /* Pin Controlled by PA10 */
-#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) /* Ethernet MAC Transmit Data 1 */
-#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) /* Pin Controlled by PA9 */
-#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) /* Ethernet MAC Transmit Data 0 */
-#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) /* Pin Controlled by PA8 */
-#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) /* Ethernet MAC Transmit Enable */
-#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */
-#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */
-
-#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) /* Pin Controlled by PB3 */
-#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) /* Pin Controlled by PB4 */
-#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */
-#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
-#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
-#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
-#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
-#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
-#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) /* Pin Controlled by PB19 */
-#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) /* USART 1 Data Terminal ready */
-#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) /* Ethernet MAC Receive Clock */
-#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) /* Pin Controlled by PB18 */
-#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) /* USART 1 Ring Indicator */
-#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) /* Ethernet MAC Collision Detected */
-#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) /* Pin Controlled by PB17 */
-#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) /* SSC Receive Frame Sync 2 */
-#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) /* Ethernet MAC Receive Data Valid */
-#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) /* Pin Controlled by PB16 */
-#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) /* SSC Receive Clock 2 */
-#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) /* Ethernet MAC Receive Data 3 */
-#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) /* Pin Controlled by PB15 */
-#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) /* SSC Receive Data 2 */
-#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) /* Ethernet MAC Receive Data 2 */
-#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) /* Pin Controlled by PB14 */
-#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) /* SSC Transmit Data 2 */
-#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) /* Ethernet MAC Transmikt Coding Error */
-#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) /* Pin Controlled by PB13 */
-#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) /* SSC Transmit Clock 2 */
-#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) /* Ethernet MAC Transmit Data 3 */
-#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) /* Pin Controlled by PB12 */
-#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) /* SSC Transmit Frame Sync 2 */
-#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) /* Ethernet MAC Transmit Data 2 */
-
-#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) /* (PIOB) Select B Register */
-#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */
-
-#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) /* (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. */
-#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) /* (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. */
-#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) /* (SMC2) 8-bit. */
-#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) /* (SMC2) Wait State Enable */
-#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) /* (PIOC) Select A Register */
-#define AT91C_PIOC_SODR ((AT91_REG *) 0xFFFFF830) /* (PIOC) Set Output Data Register */
-#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) /* (PIOC) Clear Output Data Register */
-#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) /* (PIOC) Pin Data Status Register */
-
-#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */
-#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
-#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */
-#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */
-#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */
-#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) /* (CKGR) Base Address */
-#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */
-#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */
-#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */
-#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */
-#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */
-#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */
-#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
-#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */
-#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */
-#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */
-#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) /* (PIOC) PIO Enable Register */
-#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
-#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */
-#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
-#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
-
-#endif
diff --git a/arch/arm/mach-at91rm9200/include/mach/hardware.h b/arch/arm/mach-at91rm9200/include/mach/hardware.h
deleted file mode 100644
index a84c60a..0000000
--- a/arch/arm/mach-at91rm9200/include/mach/hardware.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/include/asm-arm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <sizes.h>
-
-#ifndef __ASSEMBLY__
-#include "AT91RM9200.h"
-#else
-#include "AT91RM9200_inc.h"
-#endif
-
-/* Virtual and Physical base address for system peripherals */
-#define AT91_SYS_BASE 0xFFFFF000 /*4K */
-
-/* Virtual and Physical base addresses of user peripherals */
-#define AT91_SPI_BASE 0xFFFE0000 /*16K */
-#define AT91_SSC2_BASE 0xFFFD8000 /*16K */
-#define AT91_SSC1_BASE 0xFFFD4000 /*16K */
-#define AT91_SSC0_BASE 0xFFFD0000 /*16K */
-#define AT91_USART3_BASE 0xFFFCC000 /*16K */
-#define AT91_USART2_BASE 0xFFFC8000 /*16K */
-#define AT91_USART1_BASE 0xFFFC4000 /*16K */
-#define AT91_USART0_BASE 0xFFFC0000 /*16K */
-#define AT91_EMAC_BASE 0xFFFBC000 /*16K */
-#define AT91_TWI_BASE 0xFFFB8000 /*16K */
-#define AT91_MCI_BASE 0xFFFB4000 /*16K */
-#define AT91_UDP_BASE 0xFFFB0000 /*16K */
-#define AT91_TCB1_BASE 0xFFFA4000 /*16K */
-#define AT91_TCB0_BASE 0xFFFA0000 /*16K */
-
-#define AT91_USB_HOST_BASE 0x00300000
-#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define AT91_IO_BASE 0xF0000000 /* Virt/Phys Address of IO */
-
-/* FLASH */
-#define AT91_FLASH_BASE 0x10000000 /* NCS0 */
-
-/* SDRAM */
-#define AT91_SDRAM_BASE 0x20000000 /* NCS1 */
-
-/* SmartMedia */
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3 */
-
-/* Definition of interrupt priority levels */
-#define AT91C_AIC_PRIOR_0 AT91C_AIC_PRIOR_LOWEST
-#define AT91C_AIC_PRIOR_1 ((unsigned int) 0x1)
-#define AT91C_AIC_PRIOR_2 ((unsigned int) 0x2)
-#define AT91C_AIC_PRIOR_3 ((unsigned int) 0x3)
-#define AT91C_AIC_PRIOR_4 ((unsigned int) 0x4)
-#define AT91C_AIC_PRIOR_5 ((unsigned int) 0x5)
-#define AT91C_AIC_PRIOR_6 ((unsigned int) 0x6)
-#define AT91C_AIC_PRIOR_7 AT91C_AIC_PRIOR_HIGEST
-
-#endif
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-08-23 3:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-23 3:30 [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261 Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 2/5] dm9000: allow to specify that no srom is present Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 3/5] at91: rename clocksource.c -> at91sam926x_time.c Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 4/5] macb: introduce HAS_MACB configuration Jean-Christophe PLAGNIOL-VILLARD
2010-08-23 3:33 ` [PATCH 5/5] at91: remove non used and obsolete at91rm9200 code Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox