mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH] at91sam9260/at91sam9263: use the same id as in the kernel for the uart devices
Date: Fri,  1 Oct 2010 04:47:33 +0200	[thread overview]
Message-ID: <1285901253-2697-1-git-send-email-plagnioj@jcrosoft.com> (raw)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9260_devices.c |   14 +++++++-------
 arch/arm/mach-at91/at91sam9263_devices.c |    8 ++++----
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 548bff6..324df86 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -122,7 +122,7 @@ void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 static struct device_d dbgu_serial_device = {
-	.id	  = -1,
+	.id	  = 0,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91_BASE_SYS + AT91_DBGU,
@@ -137,7 +137,7 @@ static inline void configure_dbgu_pins(void)
 }
 
 static struct device_d uart0_serial_device = {
-	.id	  = -1,
+	.id	  = 1,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US0,
@@ -165,7 +165,7 @@ static inline void configure_usart0_pins(unsigned pins)
 }
 
 static struct device_d uart1_serial_device = {
-	.id	  = -1,
+	.id	  = 2,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US1,
@@ -185,7 +185,7 @@ static inline void configure_usart1_pins(unsigned pins)
 }
 
 static struct device_d uart2_serial_device = {
-	.id	  = -1,
+	.id	  = 3,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US2,
@@ -205,7 +205,7 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct device_d uart3_serial_device = {
-	.id	  = -1,
+	.id	  = 4,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US3,
@@ -225,7 +225,7 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct device_d uart4_serial_device = {
-	.id	  = -1,
+	.id	  = 5,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US4,
@@ -240,7 +240,7 @@ static inline void configure_usart4_pins(void)
 }
 
 static struct device_d uart5_serial_device = {
-	.id	  = -1,
+	.id	  = 6,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9260_BASE_US5,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index dca6ac4..89f68e2 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -121,7 +121,7 @@ void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 static struct device_d dbgu_serial_device = {
-	.id	  = -1,
+	.id	  = 0,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= (AT91_BASE_SYS + AT91_DBGU),
@@ -136,7 +136,7 @@ static inline void configure_dbgu_pins(void)
 }
 
 static struct device_d uart0_serial_device = {
-	.id	  = -1,
+	.id	  = 1,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9263_BASE_US0,
@@ -156,7 +156,7 @@ static inline void configure_usart0_pins(unsigned pins)
 }
 
 static struct device_d uart1_serial_device = {
-	.id	  = -1,
+	.id	  = 2,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9263_BASE_US1,
@@ -176,7 +176,7 @@ static inline void configure_usart1_pins(unsigned pins)
 }
 
 static struct device_d uart2_serial_device = {
-	.id	  = -1,
+	.id	  = 3,
 	.name     = "atmel_serial",
 	.resource_base = {
 		.start	= AT91SAM9263_BASE_US2,
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

                 reply	other threads:[~2010-10-01  2:49 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1285901253-2697-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox