From: Marc Reilly <marc@cpdesign.com.au>
To: barebox@lists.infradead.org
Subject: [PATCH] i2c-imx: wait for STOP before disabling controller
Date: Fri, 1 Oct 2010 13:22:54 +1000 [thread overview]
Message-ID: <1285903374-6825-1-git-send-email-marc@cpdesign.com.au> (raw)
Makes sure that the STOP condition is transmitted before the I2C
controller is disabled.
This fixes a problem where writing to an external EEPROM was not working
because the EEPROM waits until the STOP before initiating the write
internally.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
---
drivers/i2c/i2c-imx.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/i2c-imx.c b/drivers/i2c/i2c-imx.c
index cc64d94..3e37441 100644
--- a/drivers/i2c/i2c-imx.c
+++ b/drivers/i2c/i2c-imx.c
@@ -265,7 +265,9 @@ static void i2c_imx_stop(struct i2c_adapter *adapter)
temp = readb(base + IMX_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, base + IMX_I2C_I2CR);
- i2c_imx->stopped = 1;
+ /* wait for the stop condition to be send, otherwise the i2c
+ * controller is disabled before the STOP is sent completely */
+ i2c_imx->stopped = i2c_imx_bus_busy(adapter,0) ? 0 : 1;
}
if (cpu_is_mx1()) {
/*
@@ -275,11 +277,9 @@ static void i2c_imx_stop(struct i2c_adapter *adapter)
udelay(i2c_imx->disable_delay);
}
- if (!i2c_imx->stopped)
- i2c_imx_bus_busy(adapter, 0);
-
- /* Disable I2C controller */
+ /* Disable I2C controller, and force our state to stopped */
writeb(0, base + IMX_I2C_I2CR);
+ i2c_imx->stopped = 1;
}
static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2010-10-01 3:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-01 3:22 Marc Reilly [this message]
2010-10-01 3:29 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1285903374-6825-1-git-send-email-marc@cpdesign.com.au \
--to=marc@cpdesign.com.au \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox