From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1P3pbB-0000jC-GR for barebox@lists.infradead.org; Thu, 07 Oct 2010 12:32:07 +0000 From: Juergen Beisert Date: Thu, 7 Oct 2010 14:28:53 +0200 Message-Id: <1286454535-695-2-git-send-email-jbe@pengutronix.de> In-Reply-To: <1286454535-695-1-git-send-email-jbe@pengutronix.de> References: <1286454535-695-1-git-send-email-jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/3] Add MMC support to barebox To: barebox@lists.infradead.org This adds the basic framework to handle MCI cards in barebox. Signed-off-by: Juergen Beisert --- drivers/Kconfig | 1 + drivers/Makefile | 1 + drivers/mci/Kconfig | 31 ++ drivers/mci/Makefile | 1 + drivers/mci/mci-core.c | 1308 ++++++++++++++++++++++++++++++++++++++++++++++++ include/mci.h | 226 +++++++++ 6 files changed, 1568 insertions(+), 0 deletions(-) create mode 100644 drivers/mci/Kconfig create mode 100644 drivers/mci/Makefile create mode 100644 drivers/mci/mci-core.c create mode 100644 include/mci.h diff --git a/drivers/Kconfig b/drivers/Kconfig index f7154c6..13235f3 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -9,6 +9,7 @@ source "drivers/mtd/Kconfig" source "drivers/ata/Kconfig" source "drivers/usb/Kconfig" source "drivers/video/Kconfig" +source "drivers/mci/Kconfig" source "drivers/clk/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 706e1c8..71d34f9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -6,5 +6,6 @@ obj-y += usb/ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_I2C) += i2c/ +obj-$(CONFIG_MCI) += mci/ obj-$(CONFIG_VIDEO) += video/ obj-y += clk/ diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig new file mode 100644 index 0000000..28f3283 --- /dev/null +++ b/drivers/mci/Kconfig @@ -0,0 +1,31 @@ +menuconfig MCI + bool "MCI drivers " + select ATA + select ATA_DISK + help + Add support for MCI drivers, used to handle MMC and SD cards + +if MCI + +comment "--- Feature list ---" + +config MCI_STARTUP + bool "Probe on system start" + help + Say 'y' here if the MCI framework should probe for attached MCI cards + on system start up. This is required if the card carries barebox's + environment (for example on systems where the MCI card is the sole + bootmedia). Otherwise probing run on demand with "mci*.probe=1" + +config MCI_INFO + bool "MCI Info" + depends on CMD_DEVINFO + default y + help + This entry adds more info about the attached MCI card, when the + 'devinfo' command is used on the mci device. + +comment "--- MCI host drivers ---" + +endif + diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile new file mode 100644 index 0000000..927618f --- /dev/null +++ b/drivers/mci/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MCI) += mci-core.o diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c new file mode 100644 index 0000000..c6d98be --- /dev/null +++ b/drivers/mci/mci-core.c @@ -0,0 +1,1308 @@ +/* + * (C) Copyright 2010 Juergen Beisert, Pengutronix + * + * This code is havily inspred and in parts based on: + * + * Copyright 2008, Freescale Semiconductor, Inc + * Andy Fleming + * + * Based vaguely on the Linux code + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_BUFFER_NUMBER 0xffffffff + +/** + * @file + * @brief Memory Card framework + * + * Checked with the following cards: + * - old Canon SD 16 MiB, does not like the 0x08 command (SD_CMD_SEND_IF_COND) -> failed + * - Kingston 512 MiB + * - SanDisk 512 MiB + * - Transcend SD Ultra, 1 GiB (Industrial) + */ + +/** + * Call the MMC/SD instance driver to run the command on the MMC/SD card + * @param mci_dev MCI instance + * @param cmd The information about the command to run + * @param data The data according to the command (can be NULL) + * @return Driver's answer (0 on success) + */ +static int mci_send_cmd(struct device_d *mci_dev, struct mci_cmd *cmd, struct mci_data *data) +{ + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + + return (pdata->send_cmd)(pdata->hw_dev, cmd, data); +} + +/** + * @param p Command definition to setup + * @param cmd Valid SD/MMC command (refer MMC_CMD_* / SD_CMD_*) + * @param arg Argument for the command (optional) + * @param response Command's response type (refer MMC_RSP_*) + * + * Note: When calling, the 'response' must match command's requirements + */ +static void mci_setup_cmd(struct mci_cmd *p, unsigned cmd, unsigned arg, unsigned response) +{ + p->cmdidx = cmd; + p->cmdarg = arg; + p->resp_type = response; +} + +/** + * Setup SD/MMC card's blocklength to be used for future transmitts + * @param mci_dev MCI instance + * @param len Blocklength in bytes + * @return Transaction status (0 on success) + */ +static int mci_set_blocklen(struct device_d *mci_dev, unsigned len) +{ + struct mci_cmd cmd; + + mci_setup_cmd(&cmd, MMC_CMD_SET_BLOCKLEN, len, MMC_RSP_R1); + return mci_send_cmd(mci_dev, &cmd, NULL); +} + +/** + * Write one block of data to the card + * @param mci_dev MCI instance + * @param src Where to read from to write to the card + * @param blocknum Block number to write + * @return Transaction status (0 on success) + */ +static int mci_block_write(struct device_d *mci_dev, const void *src, unsigned blocknum) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_cmd cmd; + struct mci_data data; + + mci_setup_cmd(&cmd, + MMC_CMD_WRITE_SINGLE_BLOCK, + mci->high_capacity != 0 ? blocknum : blocknum * mci->write_bl_len, + MMC_RSP_R1); + + data.src = src; + data.blocks = 1; + data.blocksize = mci->write_bl_len; + data.flags = MMC_DATA_WRITE; + + return mci_send_cmd(mci_dev, &cmd, &data); +} + +/** + * Read one block of data from the card + * @param mci_dev MCI instance + * @param dst Where to store the data read from the card + * @param blocknum Block number to read + */ +static int mci_read_block(struct device_d *mci_dev, void *dst, unsigned blocknum) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_cmd cmd; + struct mci_data data; + + mci_setup_cmd(&cmd, + MMC_CMD_READ_SINGLE_BLOCK, + mci->high_capacity != 0 ? blocknum : blocknum * mci->read_bl_len, + MMC_RSP_R1); + + data.dest = dst; + data.blocks = 1; + data.blocksize = mci->read_bl_len; + data.flags = MMC_DATA_READ; + + return mci_send_cmd(mci_dev, &cmd, &data); +} + +/** + * Reset the attached MMC/SD card + * @param mci_dev MCI instance + * @return Transaction status (0 on success) + */ +static int mci_go_idle(struct device_d *mci_dev) +{ + struct mci_cmd cmd; + int err; + + udelay(1000); + + mci_setup_cmd(&cmd, MMC_CMD_GO_IDLE_STATE, 0, MMC_RSP_NONE); + err = mci_send_cmd(mci_dev, &cmd, NULL); + + if (err) { + pr_debug("Activating IDLE state failed: %d\n", err); + return err; + } + + udelay(2000); /* WTF? */ + + return 0; +} + +/** + * FIXME + * @param mci_dev MCI instance + * @return Transaction status (0 on success) + */ +static int sd_send_op_cond(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + struct mci_cmd cmd; + int timeout = 1000; + int err; + + do { + mci_setup_cmd(&cmd, MMC_CMD_APP_CMD, 0, MMC_RSP_R1); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Preparing SD for operating conditions failed: %d\n", err); + return err; + } + + mci_setup_cmd(&cmd, SD_CMD_APP_SEND_OP_COND, + pdata->voltages | (mci->version == SD_VERSION_2 ? OCR_HCS : 0), + MMC_RSP_R3); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("SD operation condition set failed: %d\n", err); + return err; + } + udelay(1000); + } while ((!(cmd.response[0] & OCR_BUSY)) && timeout--); + + if (timeout <= 0) { + pr_debug("SD operation condition set timed out\n"); + return -ENODEV; + } + + if (mci->version != SD_VERSION_2) + mci->version = SD_VERSION_1_0; + + mci->ocr = cmd.response[0]; + + mci->high_capacity = ((mci->ocr & OCR_HCS) == OCR_HCS); + mci->rca = 0; + + return 0; +} + +/** + * Setup the operation conditions to a MultiMediaCard + * @param mci_dev MCI instance + * @return Transaction status (0 on success) + */ +static int mmc_send_op_cond(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + struct mci_cmd cmd; + int timeout = 1000; + int err; + + /* Some cards seem to need this */ + mci_go_idle(mci_dev); + + do { + mci_setup_cmd(&cmd, MMC_CMD_SEND_OP_COND, OCR_HCS | pdata->voltages, MMC_RSP_R3); + err = mci_send_cmd(mci_dev, &cmd, NULL); + + if (err) { + pr_debug("Preparing MMC for operating conditions failed: %d\n", err); + return err; + } + + udelay(1000); + } while (!(cmd.response[0] & OCR_BUSY) && timeout--); + + if (timeout <= 0) { + pr_debug("SD operation condition set timed out\n"); + return -ENODEV; + } + + mci->version = MMC_VERSION_UNKNOWN; + mci->ocr = cmd.response[0]; + + mci->high_capacity = ((mci->ocr & OCR_HCS) == OCR_HCS); + mci->rca = 0; + + return 0; +} + +/** + * FIXME + * @param mci_dev MCI instance + * @param ext_csd Buffer for a 512 byte sized extended CSD + * @return Transaction status (0 on success) + * + * Note: Only cards newer than Version 1.1 (Physical Layer Spec) support this command + */ +static int mci_send_ext_csd(struct device_d *mci_dev, char *ext_csd) +{ + struct mci_cmd cmd; + struct mci_data data; + + /* Get the Card Status Register */ + mci_setup_cmd(&cmd, MMC_CMD_SEND_EXT_CSD, 0, MMC_RSP_R1); + + data.dest = ext_csd; + data.blocks = 1; + data.blocksize = 512; + data.flags = MMC_DATA_READ; + + return mci_send_cmd(mci_dev, &cmd, &data); +} + +/** + * FIXME + * @param mci_dev MCI instance + * @param set FIXME + * @param index FIXME + * @param value FIXME + * @return Transaction status (0 on success) + */ +static int mci_switch(struct device_d *mci_dev, unsigned set, unsigned index, unsigned value) +{ + struct mci_cmd cmd; + + mci_setup_cmd(&cmd, MMC_CMD_SWITCH, + (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (index << 16) | + (value << 8), + MMC_RSP_R1b); + + return mci_send_cmd(mci_dev, &cmd, NULL); +} + +/** + * Change transfer frequency foa a MMC card + * @param mci_dev MCI instance + * @return Transaction status (0 on success) + */ +static int mmc_change_freq(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + char ext_csd[512]; /* TODO why this works on ARM, while the same in the disk layer does not??? */ + char cardtype; + int err; + + mci->card_caps = 0; + + /* Only version 4 supports high-speed */ + if (mci->version < MMC_VERSION_4) + return 0; + + mci->card_caps |= MMC_MODE_4BIT; + + err = mci_send_ext_csd(mci_dev, ext_csd); + if (err) { + pr_debug("Preparing for frequency setup failed: %d\n", err); + return err; + } + + if (ext_csd[212] || ext_csd[213] || ext_csd[214] || ext_csd[215]) + mci->high_capacity = 1; + + cardtype = ext_csd[196] & 0xf; + + err = mci_switch(mci_dev, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); + + if (err) { + pr_debug("MMC frequency changing failed: %d\n", err); + return err; + } + + /* Now check to see that it worked */ + err = mci_send_ext_csd(mci_dev, ext_csd); + + if (err) { + pr_debug("Verifying frequency change failed: %d\n", err); + return err; + } + + /* No high-speed support */ + if (!ext_csd[185]) + return 0; + + /* High Speed is set, there are two types: 52MHz and 26MHz */ + if (cardtype & MMC_HS_52MHZ) + mci->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + else + mci->card_caps |= MMC_MODE_HS; + + return 0; +} + +/** + * FIXME + * @param mci_dev MCI instance + * @param mode FIXME + * @param group FIXME + * @param value FIXME + * @param resp FIXME + * @return Transaction status (0 on success) + */ +static int sd_switch(struct device_d *mci_dev, unsigned mode, unsigned group, unsigned value, uint8_t *resp) +{ + struct mci_cmd cmd; + struct mci_data data; + unsigned arg; + + arg = (mode << 31) | 0xffffff; + arg &= ~(0xf << (group << 2)); + arg |= value << (group << 2); + + /* Switch the frequency */ + mci_setup_cmd(&cmd, SD_CMD_SWITCH_FUNC, arg, MMC_RSP_R1); + + data.dest = resp; + data.blocksize = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + + return mci_send_cmd(mci_dev, &cmd, &data); +} + +/** + * FIXME + * @param mci_dev MCI instance + * @return Transaction status (0 on success) + */ +static int sd_change_freq(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_cmd cmd; + struct mci_data data; + uint32_t switch_status[16]; + uint scr[2]; + int timeout; + int err; + + pr_debug("Changing transfer frequency\n"); + mci->card_caps = 0; + + /* Read the SCR to find out if this card supports higher speeds */ + mci_setup_cmd(&cmd, MMC_CMD_APP_CMD, mci->rca << 16, MMC_RSP_R1); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Query SD card capabilities failed: %d\n", err); + return err; + } + + mci_setup_cmd(&cmd, SD_CMD_APP_SEND_SCR, 0, MMC_RSP_R1); + + timeout = 3; + +retry_scr: + pr_debug("Trying to read the SCR (try %d of %d)\n", 4 - timeout, 3); + data.dest = (char *)&scr; + data.blocksize = 8; + data.blocks = 1; + data.flags = MMC_DATA_READ; + + err = mci_send_cmd(mci_dev, &cmd, &data); + if (err) { + pr_debug(" Catch error (%d)", err); + if (timeout--) { + pr_debug("-- retrying\n"); + goto retry_scr; + } + pr_debug("-- giving up\n"); + return err; + } + + mci->scr[0] = __be32_to_cpu(scr[0]); + mci->scr[1] = __be32_to_cpu(scr[1]); + + switch ((mci->scr[0] >> 24) & 0xf) { + case 0: + mci->version = SD_VERSION_1_0; + break; + case 1: + mci->version = SD_VERSION_1_10; + break; + case 2: + mci->version = SD_VERSION_2; + break; + default: + mci->version = SD_VERSION_1_0; + break; + } + + /* Version 1.0 doesn't support switching */ + if (mci->version == SD_VERSION_1_0) + return 0; + + timeout = 4; + while (timeout--) { + err = sd_switch(mci_dev, SD_SWITCH_CHECK, 0, 1, (uint8_t*)&switch_status); + if (err) { + pr_debug("Checking SD transfer switch frequency feature failed: %d\n", err); + return err; + } + + /* The high-speed function is busy. Try again */ + if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY)) + break; + } + + if (mci->scr[0] & SD_DATA_4BIT) + mci->card_caps |= MMC_MODE_4BIT; + + /* If high-speed isn't supported, we return */ + if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) + return 0; + + err = sd_switch(mci_dev, SD_SWITCH_SWITCH, 0, 1, (uint8_t*)&switch_status); + if (err) { + pr_debug("Switching SD transfer frequency failed: %d\n", err); + return err; + } + + if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000) + mci->card_caps |= MMC_MODE_HS; + + return 0; +} + +/** + * Setup host's interface bus width and transfer frequency + * @param mci_dev MCI instance + */ +static void mci_set_ios(struct device_d *mci_dev) +{ + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + + (pdata->set_ios)(pdata->hw_dev, mci_dev, pdata->bus_width, pdata->clock); +} + +/** + * Setup host's interface transfer frequency + * @param mci_dev MCI instance + * @param clock New clock in Hz to set + */ +static void mci_set_clock(struct device_d *mci_dev, unsigned clock) +{ + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + + /* check against any given limits */ + if (clock > pdata->f_max) + clock = pdata->f_max; + + if (clock < pdata->f_min) + clock = pdata->f_min; + + pdata->clock = clock; /* the new target frequency */ + mci_set_ios(mci_dev); +} + +/** + * Setup host's interface bus width + * @param mci_dev MCI instance + * @param width New interface bit width (1, 4 or 8) + */ +static void mci_set_bus_width(struct device_d *mci_dev, unsigned width) +{ + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + + pdata->bus_width = width; /* the new target bus width */ + mci_set_ios(mci_dev); +} + +/** + * Extract card's version from its CSD + * @param mci_dev MCI instance + * @return 0 on success + */ +static void mci_detect_version_from_csd(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + int version; + + if (mci->version == MMC_VERSION_UNKNOWN) { + /* the version is coded in the bits 127:126 (left aligned) */ + version = (mci->csd[0] >> 26) & 0xf; /* FIXME why other width? */ + + switch (version) { + case 0: + printf("Detecting a 1.2 revision card\n"); + mci->version = MMC_VERSION_1_2; + break; + case 1: + printf("Detecting a 1.4 revision card\n"); + mci->version = MMC_VERSION_1_4; + break; + case 2: + printf("Detecting a 2.2 revision card\n"); + mci->version = MMC_VERSION_2_2; + break; + case 3: + printf("Detecting a 3.0 revision card\n"); + mci->version = MMC_VERSION_3; + break; + case 4: + printf("Detecting a 4.0 revision card\n"); + mci->version = MMC_VERSION_4; + break; + default: + printf("Unknow revision. Falling back to a 1.2 revision card\n"); + mci->version = MMC_VERSION_1_2; + break; + } + } +} + +/** + * meaning of the encoded 'unit' bits in the CSD's field 'TRAN_SPEED' + * (divided by 10 to be nice to platforms without floating point) + */ +static const unsigned tran_speed_unit[] = { + [0] = 10000, /* 100 kbit/s */ + [1] = 100000, /* 1 Mbit/s */ + [2] = 1000000, /* 10 Mbit/s */ + [3] = 10000000, /* 100 Mbit/s */ + /* [4]...[7] are reserved */ +}; + +/** + * meaning of the 'time' bits in the CSD's field 'TRAN_SPEED' + * (multiplied by 10 to be nice to platforms without floating point) + */ +static const unsigned char tran_speed_time[] = { + 0, /* reserved */ + 10, /* 1.0 ns */ + 12, /* 1.2 ns */ + 13, + 15, + 20, + 25, + 30, + 35, + 40, + 45, + 50, + 55, + 60, + 70, /* 7.0 ns */ + 80, /* 8.0 ns */ +}; + +/** + * Extract max. transfer speed from the CSD + * @param mci_dev MCI instance + * + * Encoded in bit 103:96 (103: reserved, 102:99: time, 98:96 unit) + */ +static void mci_extract_max_tran_speed_from_csd(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + unsigned unit, time; + + unit = tran_speed_unit[(mci->csd[0] & 0x7)]; + time = tran_speed_time[((mci->csd[0] >> 3) & 0xf)]; + if ((unit == 0) || (time == 0)) { + pr_warning("Unsupported 'TRAN_SPEED' unit/time value. Can't calculate card's max. transfer speed\n"); + return; + } + + mci->tran_speed = time * unit; + pr_debug("Transfer speed: %u\n", mci->tran_speed); +} + +/** + * Extract max read and write block length from the CSD + * @param mci_dev MCI instance + * + * Encoded in bit 83:80 (read) and 25:22 (write) + */ +static void mci_extract_block_lengths_from_csd(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + + mci->read_bl_len = 1 << ((mci->csd[1] >> 16) & 0xf); + + if (IS_SD(mci)) + mci->write_bl_len = mci->read_bl_len; /* FIXME why? */ + else + mci->write_bl_len = 1 << ((mci->csd[3] >> 22) & 0xf); + + pr_debug("Max. block length are: Write=%u, Read=%u Bytes\n", mci->read_bl_len, mci->write_bl_len); +} + +/** + * Extract card's capacitiy from the CSD + * @param mci_dev MCI instance + */ +static void mci_extract_card_capacity_from_csd(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + uint64_t csize, cmult; + + if (mci->high_capacity) { + csize = (mci->csd[1] & 0x3f) << 16 | (mci->csd[2] & 0xffff0000) >> 16; + cmult = 8; + } else { + csize = (mci->csd[1] & 0x3ff) << 2 | (mci->csd[2] & 0xc0000000) >> 30; + cmult = (mci->csd[2] & 0x00038000) >> 15; + } + + mci->capacity = (csize + 1) << (cmult + 2); + mci->capacity *= mci->read_bl_len; + pr_debug("Capacity: %u MiB\n", (unsigned)mci->capacity >> 20); +} + +/** + * Scan the given host interfaces and detect connected MMC/SD cards + * @param mci_dev MCI instance + * @return 0 on success, negative value else + */ +static int mci_startup(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + struct mci_cmd cmd; + int err; + + pr_debug("Put the Card in Identify Mode\n"); + + /* Put the Card in Identify Mode */ + mci_setup_cmd(&cmd, MMC_CMD_ALL_SEND_CID, 0, MMC_RSP_R2); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Can't bring card into identify mode: %d\n", err); + return err; + } + + memcpy(mci->cid, cmd.response, 16); + + pr_debug("Card's identification data is: %08X-%08X-%08X-%08X\n", mci->cid[0], mci->cid[1], mci->cid[2], mci->cid[3]); + + /* + * For MMC cards, set the Relative Address. + * For SD cards, get the Relatvie Address. + * This also puts the cards into Standby State + */ + pr_debug("Get/Set relative address\n"); + mci_setup_cmd(&cmd, SD_CMD_SEND_RELATIVE_ADDR, mci->rca << 16, MMC_RSP_R6); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Get/Set relative address failed: %d\n", err); + return err; + } + + if (IS_SD(mci)) + mci->rca = (cmd.response[0] >> 16) & 0xffff; + + pr_debug("Get card's specific data\n"); + /* Get the Card-Specific Data */ + mci_setup_cmd(&cmd, MMC_CMD_SEND_CSD, mci->rca << 16, MMC_RSP_R2); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Getting card's specific data failed: %d\n", err); + return err; + } + + /* CSD is of 128 bit */ + memcpy(mci->csd, cmd.response, 16); + + pr_debug("Card's specific data is: %08X-%08X-%08X-%08X\n", mci->csd[0], mci->csd[1], mci->csd[2], mci->csd[3]); + + mci_detect_version_from_csd(mci_dev); + mci_extract_max_tran_speed_from_csd(mci_dev); + mci_extract_block_lengths_from_csd(mci_dev); + mci_extract_card_capacity_from_csd(mci_dev); + + /* sanitiy? */ + if (mci->read_bl_len > 512) { + mci->read_bl_len = 512; + pr_warning("Limiting max. read block size down to %u\n", mci->read_bl_len); + } + + if (mci->write_bl_len > 512) { + mci->write_bl_len = 512; + pr_warning("Limiting max. write block size down to %u\n", mci->read_bl_len); + } + pr_debug("Read block length: %u, Write block length: %u\n", mci->read_bl_len, mci->write_bl_len); + + pr_debug("Select the card, and put it into Transfer Mode\n"); + /* Select the card, and put it into Transfer Mode */ + mci_setup_cmd(&cmd, MMC_CMD_SELECT_CARD, mci->rca << 16, MMC_RSP_R1b); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Putting in transfer mode failed: %d\n", err); + return err; + } + + if (IS_SD(mci)) + err = sd_change_freq(mci_dev); + else + err = mmc_change_freq(mci_dev); + + if (err) + return err; + + /* Restrict card's capabilities by what the host can do */ + mci->card_caps &= pdata->host_caps; + + if (IS_SD(mci)) { + if (mci->card_caps & MMC_MODE_4BIT) { + pr_debug("Prepare for bus width change\n"); + mci_setup_cmd(&cmd, MMC_CMD_APP_CMD, mci->rca << 16, MMC_RSP_R1); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Preparing SD for bus width change failed: %d\n", err); + return err; + } + + pr_debug("Set SD bus width to 4 bit\n"); + mci_setup_cmd(&cmd, SD_CMD_APP_SET_BUS_WIDTH, 2, MMC_RSP_R1); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Changing SD bus width failed: %d\n", err); + /* TODO continue with 1 bit? */ + return err; + } + mci_set_bus_width(mci_dev, 4); + } + /* if possible, speed up the transfer */ + if (mci->card_caps & MMC_MODE_HS) + mci_set_clock(mci_dev, 50000000); + else + mci_set_clock(mci_dev, 25000000); + } else { + if (mci->card_caps & MMC_MODE_4BIT) { + pr_debug("Set MMC bus width to 4 bit\n"); + /* Set the card to use 4 bit*/ + err = mci_switch(mci_dev, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_4); + if (err) { + pr_debug("Changing MMC bus width failed: %d\n", err); + return err; + } + mci_set_bus_width(mci_dev, 4); + } else if (mci->card_caps & MMC_MODE_8BIT) { + pr_debug("Set MMC bus width to 8 bit\n"); + /* Set the card to use 8 bit*/ + err = mci_switch(mci_dev, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_8); + if (err) { + pr_debug("Changing MMC bus width failed: %d\n", err); + return err; + } + mci_set_bus_width(mci_dev, 8); + } + /* if possible, speed up the transfer */ + if (mci->card_caps & MMC_MODE_HS) { + if (mci->card_caps & MMC_MODE_HS_52MHz) + mci_set_clock(mci_dev, 52000000); + else + mci_set_clock(mci_dev, 26000000); + } else + mci_set_clock(mci_dev, 20000000); + } + + /* we setup the blocklength only one times for all accesses to this media */ + err = mci_set_blocklen(mci_dev, mci->read_bl_len); + + return err; +} + +/** + * Detect a SD 2.0 card and enable its features + * @param mci_dev MCI instance + * @return Transfer status (0 on success) + * + * By issuing the CMD8 command SDHC/SDXC cards realize that the host supports + * the Physical Layer Version 2.00 or later and the card can enable + * corresponding new functions. + * + * If this CMD8 command will end with a timeout it is a MultiMediaCard only. + */ +static int sd_send_if_cond(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + struct mci_cmd cmd; + int err; + + mci_setup_cmd(&cmd, SD_CMD_SEND_IF_COND, + /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ + ((pdata->voltages & 0x00ff8000) != 0) << 8 | 0xaa, + MMC_RSP_R7); + err = mci_send_cmd(mci_dev, &cmd, NULL); + if (err) { + pr_debug("Query interface conditions failed: %d\n", err); + return err; + } + + if ((cmd.response[0] & 0xff) != 0xaa) { + pr_debug("Card cannot work with hosts supply voltages\n"); + return -EINVAL; + } else { + pr_debug("SD Card Rev. 2.00 or later detected\n"); + mci->version = SD_VERSION_2; + } + + return 0; +} + +/* ------------------ attach to the ATA API --------------------------- */ + +/** + * Write a chunk of sectors to media + * @param disk_dev Disk device instance + * @param sector_start Sector's number to start write to + * @param sector_count Sectors to write + * @param buffer Buffer to write from + * @return 0 on success, anything else on failure + * + * This routine expects the buffer has the correct size to read all data! + */ +static int mci_sd_write(struct device_d *disk_dev, uint64_t sector_start, unsigned sector_count, const void *buffer) +{ + struct ata_interface *intf = disk_dev->platform_data; + struct device_d *mci_dev = intf->priv; + struct mci *mci = GET_MCI_DATA(mci_dev); + int rc; + + pr_debug("%s called: Write %u block(s), starting at %lu", __func__, sector_count, (unsigned)sector_count); + + if (mci->write_bl_len != 512) { + pr_warning("MMC/SD block size is not 512 bytes (its %u bytes instead)\n", mci->read_bl_len); + return -EINVAL; + } + + while (sector_count) { + /* size of the block number field in the MMC/SD command is 32 bit only */ + if (sector_start > MAX_BUFFER_NUMBER) { + pr_err("Cannot handle block number %llu. Too large!\n", sector_start); + return -EINVAL; + } + rc = mci_block_write(mci_dev, buffer, sector_start); + if (rc != 0) { + pr_err("Writing block %u failed\n", (unsigned)sector_start); + return rc; + } + sector_count--; + buffer += mci->write_bl_len; + sector_start++; + } + + return 0; +} + +/** + * Read a chunk of sectors from media + * @param disk_dev Disk device instance + * @param sector_start Sector's number to start read from + * @param sector_count Sectors to read + * @param buffer Buffer to read into + * @return 0 on success, anything else on failure + * + * This routine expects the buffer has the correct size to store all data! + */ +static int mci_sd_read(struct device_d *disk_dev, uint64_t sector_start, unsigned sector_count, void *buffer) +{ + struct ata_interface *intf = disk_dev->platform_data; + struct device_d *mci_dev = intf->priv; + struct mci *mci = GET_MCI_DATA(mci_dev); + int rc; + + pr_debug("%s called: Read %u block(s), starting at %lu to %08X\n", __func__, sector_count, (unsigned)sector_start, buffer); + + if (mci->read_bl_len != 512) { + pr_warning("MMC/SD block size is not 512 bytes (its %u bytes instead)\n", mci->read_bl_len); + return -EINVAL; + } + + while (sector_count) { + if (sector_start > MAX_BUFFER_NUMBER) { + pr_err("Cannot handle block number %lu. Too large!\n", (unsigned)sector_start); + return -EINVAL; + } + rc = mci_read_block(mci_dev, buffer, (unsigned)sector_start); + if (rc != 0) { + pr_err("Reading block %lu failed\n", (unsigned)sector_start); + return rc; + } + sector_count--; + buffer += mci->read_bl_len; /* FIXME always 512 bytes? */ + sector_start++; + } + + return 0; +} + +/* ------------------ attach to the device API --------------------------- */ + +#ifdef CONFIG_MCI_INFO +/** + * Extract the Manufacturer ID from the CID + * @param mci Instance data + * + * The 'MID' is encoded in bit 127:120 in the CID + */ +static unsigned extract_mid(struct mci *mci) +{ + return mci->cid[0] >> 24; +} + +/** + * Extract the OEM/Application ID from the CID + * @param mci Instance data + * + * The 'OID' is encoded in bit 119:104 in the CID + */ +static unsigned extract_oid(struct mci *mci) +{ + return (mci->cid[0] >> 8) & 0xffff; +} + +/** + * Extract the product revision from the CID + * @param mci Instance data + * + * The 'PRV' is encoded in bit 63:56 in the CID + */ +static unsigned extract_prv(struct mci *mci) +{ + return mci->cid[2] >> 24; +} + +/** + * Extract the product serial number from the CID + * @param mci Instance data + * + * The 'PSN' is encoded in bit 55:24 in the CID + */ +static unsigned extract_psn(struct mci *mci) +{ + return (mci->cid[2] << 8) | (mci->cid[3] >> 24); +} + +/** + * Extract the month of the manufacturing date from the CID + * @param mci Instance data + * + * The 'MTD' is encoded in bit 19:8 in the CID, month in 11:8 + */ +static unsigned extract_mtd_month(struct mci *mci) +{ + return (mci->cid[3] >> 8) & 0xf; +} + +/** + * Extract the year of the manufacturing date from the CID + * @param mci Instance data + * + * The 'MTD' is encoded in bit 19:8 in the CID, year in 19:12 + * An encoded 0 means the year 2000 + */ +static unsigned extract_mtd_year(struct mci *mci) +{ + return ((mci->cid[3] >> 12) & 0xff) + 2000U; +} + +/** + * Output some valuable information when the user runs 'devinfo' on an MCI device + * @param mci_dev MCI device instance + */ +static void mci_info(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + + if (mci->ready_for_use == 0) { + printf(" No information available:\n MCI card not probed yet\n"); + return; + } + + printf(" Card:\n"); + if (mci->version < SD_VERSION_SD) { + printf(" Attached is a MultiMediaCard (Version: %u.%u)\n", (mci->version >> 4) & 0xf, mci->version & 0xf); + } else { + printf(" Attached is an SD Card (Version: %u.%u)\n", (mci->version >> 4) & 0xf, mci->version & 0xf); + } + printf(" Capacity: %u MiB\n", (unsigned)(mci->capacity >> 20)); + + if (mci->high_capacity) + printf(" High capacity card\n"); + printf(" CID: %08X-%08X-%08X-%08X\n", mci->cid[0], mci->cid[1], mci->cid[2], mci->cid[3]); + printf(" CSD: %08X-%08X-%08X-%08X\n", mci->csd[0], mci->csd[1], mci->csd[2], mci->csd[3]); + printf(" Max. transfer speed: %u Hz\n", mci->tran_speed); + printf(" Manufacturer ID: %02X\n", extract_mid(mci)); + printf(" OEM/Application ID: %04X\n", extract_oid(mci)); + printf(" Product name: '%c%c%c%c%c'\n", mci->cid[0] & 0xff, (mci->cid[1] >> 24), (mci->cid[1] >> 16) & 0xff, + (mci->cid[1] >> 8) & 0xff, mci->cid[1] & 0xff); + printf(" Product revision: %u.%u\n", extract_prv(mci) >> 4, extract_prv(mci) & 0xf); + printf(" Serial no: %0u\n", extract_psn(mci)); + printf(" Manufacturing date: %u.%u\n", extract_mtd_month(mci), extract_mtd_year(mci)); +} +#endif + +/** + * Check if the MCI card is already probed + * @param mci_dev MCI device instance + * @return 0 when not probed yet, -EPERM if already probed + * + * @a barebox cannot really cope with hot plugging. So, probing an attached + * MCI card is a one time only job. If its already done, there is no way to + * return. + */ +static int mci_check_if_already_initialized(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + + if (mci->ready_for_use != 0) + return -EPERM; + + return 0; +} + +/** + * Probe an MCI card at the given host interface + * @param mci_dev MCI device instance + * @return 0 on success, negative values else + */ +static int mci_card_probe(struct device_d *mci_dev) +{ + struct mci *mci = GET_MCI_DATA(mci_dev); + struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev); + struct device_d *disk_dev; + struct ata_interface *p; + int rc; + + /* start with a host interface reset */ + rc = (pdata->init)(pdata->hw_dev, mci_dev); + if (rc) { + pr_err("Cannot reset the SD/MMC interface\n"); + return rc; + } + + mci_set_bus_width(mci_dev, 1); + mci_set_clock(mci_dev, 1); /* set the lowest available clock */ + + /* reset the card */ + rc = mci_go_idle(mci_dev); + if (rc) { + pr_warning("Cannot reset the SD/MMC card\n"); + goto on_error; + } + + /* Check if this card can handle the "SD Card Physical Layer Specification 2.0" */ + rc = sd_send_if_cond(mci_dev); + if (rc) { + /* If the command timed out, we check for an MMC card */ + if (rc == -ETIMEDOUT) { + pr_debug("Card seems to be a MultiMediaCard\n"); + rc = mmc_send_op_cond(mci_dev); + if (rc) { + printf("MultiMediaCard did not respond to voltage select!\n"); + rc = -ENODEV; + goto on_error; + } + } else + goto on_error; + } else { + /* Its a 2.xx card. Setup operation conditions */ + rc = sd_send_op_cond(mci_dev); + if (rc) { + pr_debug("Cannot setup SD card's operation condition\n"); + goto on_error; + } + } + + rc = mci_startup(mci_dev); + if (rc) { + printf("Card's startup fails with %d\n", rc); + goto on_error; + } + + pr_debug("Card is up and running now, registering as a disk\n"); + mci->ready_for_use = 1; /* TODO now or later? */ + + /* + * An MMC/SD card acts like an ordinary disk. + * So, re-use the disk driver to gain access to this media + */ + disk_dev = xzalloc(sizeof(struct device_d) + sizeof(struct ata_interface)); + if (disk_dev == NULL) { + pr_err("Out of memory when registering the MMC/SD device\n"); + rc = -ENOMEM; + goto on_error; + } + p = (struct ata_interface*)&disk_dev[1]; + + p->write = mci_sd_write; + p->read = mci_sd_read; + p->priv = mci_dev; + + strcpy(disk_dev->name, "disk"); + disk_dev->size = mci->capacity; + disk_dev->map_base = 0; + disk_dev->platform_data = p; + + register_device(disk_dev); + + pr_debug("SD Card successfully added\n"); + +on_error: + if (rc != 0) { + pdata->clock = 0; /* disable the MCI clock */ + mci_set_ios(mci_dev); + } + + return rc; +} + +/** + * Trigger probing of an attached MCI card + * @param mci_dev MCI device instance + * @param param FIXME + * @param val "0" does nothing, a "1" will probe for a MCI card + * @return 0 on success + */ +static int mci_set_probe(struct device_d *mci_dev, struct param_d *param, const char *val) +{ + int rc, probe; + + rc = mci_check_if_already_initialized(mci_dev); + if (rc != 0) + return rc; + + probe = simple_strtoul(val, NULL, 0); + if (probe != 0) { + rc = mci_card_probe(mci_dev); + if (rc != 0) + return rc; + } + + return dev_param_set_generic(mci_dev, param, val); +} + +/** + * Add parameter to the MCI device on demand + * @param mci_dev MCI device instance + * @return 0 on success + * + * This parameter is only available (or usefull) if MCI card probing is delayed + */ +static int add_mci_parameter(struct device_d *mci_dev) +{ + int rc; + + /* provide a 'probing right now' parameter for the user */ + rc = dev_add_param(mci_dev, "probe", mci_set_probe, NULL, 0); + if (rc != 0) + return rc; + + return dev_set_param(mci_dev, "probe", "0"); +} + +/** + * Prepare for MCI card's usage + * @param mci_dev MCI device instance + * @return 0 on success + * + * This routine will probe an attached MCI card immediately or provide + * a parameter to do it later on user's demand. + */ +static int mci_probe(struct device_d *mci_dev) +{ + struct mci *mci; + int rc; + + mci = xzalloc(sizeof(struct mci)); + mci_dev->priv = mci; + +#ifdef CONFIG_MCI_STARTUP + /* if enabled, probe the attached card immediately */ + rc = mci_card_probe(mci_dev); + if (rc == -ENODEV) { + /* + * If it fails, add the 'probe' parameter to give the user + * a chance to insert a card and try again. Note: This may fail + * systems that rely on the MCI card for startup (for the + * persistant environment for example) + */ + rc = add_mci_parameter(mci_dev); + if (rc != 0) { + pr_err("Failed to add 'probe' parameter to the MCI device\n"); + goto on_error; + } + } +#endif + +#ifndef CONFIG_MCI_STARTUP + /* add params on demand */ + rc = add_mci_parameter(mci_dev); + if (rc != 0) { + pr_err("Failed to add 'probe' parameter to the MCI device\n"); + goto on_error; + } +#endif + + return rc; + +on_error: + free(mci); + return rc; +} + +static struct driver_d mci_driver = { + .name = "mci", + .probe = mci_probe, + .info = mci_info, +}; + +static int mci_init(void) +{ + return register_driver(&mci_driver); +} + +device_initcall(mci_init); + +/** + * Create a new mci device (for convenience) + * @param pdata MCI device's platform data for this MCI device + * @return 0 on success + */ +int mci_register(struct mci_platformdata *pdata) +{ + struct device_d *mci_dev; + + mci_dev = xzalloc(sizeof(struct device_d)); + + strcpy(mci_dev->name, mci_driver.name); + mci_dev->platform_data = (void*)pdata; + + return register_device(mci_dev); +} diff --git a/include/mci.h b/include/mci.h new file mode 100644 index 0000000..ec04f7d --- /dev/null +++ b/include/mci.h @@ -0,0 +1,226 @@ +/* + * Copyright 2008, Freescale Semiconductor, Inc + * Andy Fleming + * + * Based (loosely) on the Linux code + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MCI_H_ +#define _MCI_H_ + +#include + +/* Firmware revisions for SD cards */ +#define SD_VERSION_SD 0x20000 +#define SD_VERSION_2 (SD_VERSION_SD | 0x20) +#define SD_VERSION_1_0 (SD_VERSION_SD | 0x10) +#define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a) + +/* Firmware revisions for MMC cards */ +#define MMC_VERSION_MMC 0x10000 +#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) +#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x12) +#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x14) +#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x22) +#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x30) +#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x40) + +#define MMC_MODE_HS 0x001 +#define MMC_MODE_HS_52MHz 0x010 +#define MMC_MODE_4BIT 0x100 +#define MMC_MODE_8BIT 0x200 + +#define SD_DATA_4BIT 0x00040000 + +#define IS_SD(x) (x->version & SD_VERSION_SD) + +#define MMC_DATA_READ 1 +#define MMC_DATA_WRITE 2 + +/* command list */ +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SWITCH 6 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_EXT_CSD 8 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_STOP_TRANSMISSION 12 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_SINGLE_BLOCK 24 +#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 +#define MMC_CMD_APP_CMD 55 + +#define SD_CMD_SEND_RELATIVE_ADDR 3 +#define SD_CMD_SWITCH_FUNC 6 +#define SD_CMD_SEND_IF_COND 8 + +#define SD_CMD_APP_SET_BUS_WIDTH 6 +#define SD_CMD_APP_SEND_OP_COND 41 +#define SD_CMD_APP_SEND_SCR 51 + +/* SCR definitions in different words */ +#define SD_HIGHSPEED_BUSY 0x00020000 +#define SD_HIGHSPEED_SUPPORTED 0x00020000 + +#define MMC_HS_TIMING 0x00000100 +#define MMC_HS_52MHZ 0x2 + +#define OCR_BUSY 0x80000000 +/** card's response in its OCR if it is a high capacity card */ +#define OCR_HCS 0x40000000 + +#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ +#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ +#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ +#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ +#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ +#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ +#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ +#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ +#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ +#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ +#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ +#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ +#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ +#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ +#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ +#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ +#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ + +#define MMC_SWITCH_MODE_CMD_SET 0x00 /** Change the command set */ +#define MMC_SWITCH_MODE_SET_BITS 0x01 /** Set bits in EXT_CSD byte addressed by index which are 1 in value field */ +#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /** Clear bits in EXT_CSD byte addressed by index, which are 1 in value field */ +#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /** Set target byte to value */ + +#define SD_SWITCH_CHECK 0 +#define SD_SWITCH_SWITCH 1 + +/* + * EXT_CSD fields + */ + +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_REV 192 /* RO */ +#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ + +/* + * EXT_CSD field definitions + */ + +#define EXT_CSD_CMD_SET_NORMAL (1<<0) +#define EXT_CSD_CMD_SET_SECURE (1<<1) +#define EXT_CSD_CMD_SET_CPSECURE (1<<2) + +#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ + +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ + +#define R1_ILLEGAL_COMMAND (1 << 22) +#define R1_APP_CMD (1 << 5) + +/* response types */ +#define MMC_RSP_PRESENT (1 << 0) +#define MMC_RSP_136 (1 << 1) /* 136 bit response */ +#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ +#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ +#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ + +#define MMC_RSP_NONE (0) +#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) +#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) +#define MMC_RSP_R3 (MMC_RSP_PRESENT) +#define MMC_RSP_R4 (MMC_RSP_PRESENT) +#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) + +/** command information to be sent to the SD/MMC card */ +struct mci_cmd { + unsigned cmdidx; /**< Command to be sent to the SD/MMC card */ + unsigned resp_type; /**< Type of expected response, refer MMC_RSP_* macros */ + unsigned cmdarg; /**< Command's arguments */ + unsigned response[4]; /**< card's response */ +}; + +/** data information to be used with some SD/MMC commands */ +struct mci_data { + union { + uint8_t *dest; + const uint8_t *src; /**< src buffers don't get written to */ + }; + unsigned flags; /**< refer MMC_DATA_* to define direction */ + unsigned blocks; /**< block count to handle in this command */ + unsigned blocksize; /**< block size in bytes (mostly 512) */ +}; + +/** host information */ +struct mci_platformdata { + struct device_d *hw_dev; /**< the host MCI hardware device */ + unsigned voltages; + unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* and FIXME */ + unsigned f_min; /**< host interface lower limit */ + unsigned f_max; /**< host interface upper limit */ + unsigned clock; /**< Current clock used to talk to the card */ + unsigned bus_width; /**< used data bus width to the card */ + + int (*init)(struct device_d*, struct device_d*); /**< init the host interface */ + void (*set_ios)(struct device_d*, struct device_d*, unsigned, unsigned); /**< change host interface settings */ + int (*send_cmd)(struct device_d*, struct mci_cmd*, struct mci_data*); /**< handle a command */ +}; + +/** MMC/SD and interface instance information */ +struct mci { + unsigned version; + int high_capacity; /**< != 0 when a high capacity card is connected (OCR -> OCR_HCS) */ + unsigned card_caps; /**< Card's capabilities */ + unsigned ocr; /**< card's "operation condition register" */ + unsigned scr[2]; + unsigned csd[4]; /**< card's "card specific data register" */ + unsigned cid[4]; /**< card's "card identification register" */ + unsigned short rca; /* FIXME */ + unsigned tran_speed; /**< not yet used */ + unsigned read_bl_len; /**< currently used data block length for read accesses */ + unsigned write_bl_len; /**< currently used data block length for write accesses */ + uint64_t capacity; /**< Card's data capacity in bytes */ + int ready_for_use; /** true if already probed */ +}; + +int mci_register(struct mci_platformdata*); + +#define GET_HOST_DATA(x) (x->priv) +#define GET_HOST_PDATA(x) (x->platform_data) +#define GET_MCI_DATA(x) (x->priv) +#define GET_MCI_PDATA(x) (x->platform_data) + +#endif /* _MCI_H_ */ -- 1.7.2.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox