mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* (no subject)
@ 2010-10-07 15:37 Sascha Hauer
  2010-10-07 15:37 ` [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers Sascha Hauer
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Sascha Hauer @ 2010-10-07 15:37 UTC (permalink / raw)
  To: barebox

Hi all and Jürgen,

Here is the patch I mentioned in the mci review + support for the i.MX27/31
mci controller.

Sascha


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers
  2010-10-07 15:37 Sascha Hauer
@ 2010-10-07 15:37 ` Sascha Hauer
  2010-10-07 15:37 ` [PATCH 2/3] mci: Add i.MX27/31 driver Sascha Hauer
  2010-10-07 15:37 ` [PATCH 3/3] ARM pca100: Add mci support Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2010-10-07 15:37 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/mci-core.c |   50 ++++++++++++++++++++++++------------------------
 include/mci.h          |   10 ++++----
 2 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index a31b96f..323b899 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -60,9 +60,9 @@
  */
 static int mci_send_cmd(struct device_d *mci_dev, struct mci_cmd *cmd, struct mci_data *data)
 {
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 
-	return (pdata->send_cmd)(pdata->hw_dev, cmd, data);
+	return host->send_cmd(host, cmd, data);
 }
 
 /**
@@ -178,7 +178,7 @@ static int mci_go_idle(struct device_d *mci_dev)
 static int sd_send_op_cond(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 	struct mci_cmd cmd;
 	int timeout = 1000;
 	int err;
@@ -192,7 +192,7 @@ static int sd_send_op_cond(struct device_d *mci_dev)
 		}
 
 		mci_setup_cmd(&cmd, SD_CMD_APP_SEND_OP_COND,
-			pdata->voltages | (mci->version == SD_VERSION_2 ? OCR_HCS : 0),
+			host->voltages | (mci->version == SD_VERSION_2 ? OCR_HCS : 0),
 			MMC_RSP_R3);
 		err = mci_send_cmd(mci_dev, &cmd, NULL);
 		if (err) {
@@ -226,7 +226,7 @@ static int sd_send_op_cond(struct device_d *mci_dev)
 static int mmc_send_op_cond(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 	struct mci_cmd cmd;
 	int timeout = 1000;
 	int err;
@@ -235,7 +235,7 @@ static int mmc_send_op_cond(struct device_d *mci_dev)
 	mci_go_idle(mci_dev);
 
 	do {
-		mci_setup_cmd(&cmd, MMC_CMD_SEND_OP_COND, OCR_HCS | pdata->voltages, MMC_RSP_R3);
+		mci_setup_cmd(&cmd, MMC_CMD_SEND_OP_COND, OCR_HCS | host->voltages, MMC_RSP_R3);
 		err = mci_send_cmd(mci_dev, &cmd, NULL);
 
 		if (err) {
@@ -502,9 +502,9 @@ retry_scr:
  */
 static void mci_set_ios(struct device_d *mci_dev)
 {
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 
-	(pdata->set_ios)(pdata->hw_dev, mci_dev, pdata->bus_width, pdata->clock);
+	host->set_ios(host, mci_dev, host->bus_width, host->clock);
 }
 
 /**
@@ -514,16 +514,16 @@ static void mci_set_ios(struct device_d *mci_dev)
  */
 static void mci_set_clock(struct device_d *mci_dev, unsigned clock)
 {
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 
 	/* check against any given limits */
-	if (clock > pdata->f_max)
-		clock = pdata->f_max;
+	if (clock > host->f_max)
+		clock = host->f_max;
 
-	if (clock < pdata->f_min)
-		clock = pdata->f_min;
+	if (clock < host->f_min)
+		clock = host->f_min;
 
-	pdata->clock = clock;	/* the new target frequency */
+	host->clock = clock;	/* the new target frequency */
 	mci_set_ios(mci_dev);
 }
 
@@ -534,9 +534,9 @@ static void mci_set_clock(struct device_d *mci_dev, unsigned clock)
  */
 static void mci_set_bus_width(struct device_d *mci_dev, unsigned width)
 {
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 
-	pdata->bus_width = width;	/* the new target bus width */
+	host->bus_width = width;	/* the new target bus width */
 	mci_set_ios(mci_dev);
 }
 
@@ -690,7 +690,7 @@ static void mci_extract_card_capacity_from_csd(struct device_d *mci_dev)
 static int mci_startup(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 	struct mci_cmd cmd;
 	int err;
 
@@ -773,7 +773,7 @@ static int mci_startup(struct device_d *mci_dev)
 		return err;
 
 	/* Restrict card's capabilities by what the host can do */
-	mci->card_caps &= pdata->host_caps;
+	mci->card_caps &= host->host_caps;
 
 	if (IS_SD(mci)) {
 		if (mci->card_caps & MMC_MODE_4BIT) {
@@ -850,13 +850,13 @@ static int mci_startup(struct device_d *mci_dev)
 static int sd_send_if_cond(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 	struct mci_cmd cmd;
 	int err;
 
 	mci_setup_cmd(&cmd, SD_CMD_SEND_IF_COND,
 	/* We set the bit if the host supports voltages between 2.7 and 3.6 V */
-		((pdata->voltages & 0x00ff8000) != 0) << 8 | 0xaa,
+		((host->voltages & 0x00ff8000) != 0) << 8 | 0xaa,
 		MMC_RSP_R7);
 	err = mci_send_cmd(mci_dev, &cmd, NULL);
 	if (err) {
@@ -1095,13 +1095,13 @@ static int mci_check_if_already_initialized(struct device_d *mci_dev)
 static int mci_card_probe(struct device_d *mci_dev)
 {
 	struct mci *mci = GET_MCI_DATA(mci_dev);
-	struct mci_platformdata *pdata = GET_MCI_PDATA(mci_dev);
+	struct mci_host *host = GET_MCI_PDATA(mci_dev);
 	struct device_d *disk_dev;
 	struct ata_interface *p;
 	int rc;
 
 	/* start with a host interface reset */
-	rc = (pdata->init)(pdata->hw_dev, mci_dev);
+	rc = (host->init)(host, mci_dev);
 	if (rc) {
 		pr_err("Cannot reset the SD/MMC interface\n");
 		return rc;
@@ -1176,7 +1176,7 @@ static int mci_card_probe(struct device_d *mci_dev)
 
 on_error:
 	if (rc != 0) {
-		pdata->clock = 0;	/* disable the MCI clock */
+		host->clock = 0;	/* disable the MCI clock */
 		mci_set_ios(mci_dev);
 	}
 
@@ -1295,14 +1295,14 @@ device_initcall(mci_init);
  * @param pdata MCI device's platform data for this MCI device
  * @return 0 on success
  */
-int mci_register(struct mci_platformdata *pdata)
+int mci_register(struct mci_host *host)
 {
 	struct device_d *mci_dev;
 
 	mci_dev = xzalloc(sizeof(struct device_d));
 
 	strcpy(mci_dev->name, mci_driver.name);
-	mci_dev->platform_data = (void*)pdata;
+	mci_dev->platform_data = (void*)host;
 
 	return register_device(mci_dev);
 }
diff --git a/include/mci.h b/include/mci.h
index b9d5c1c..1e758d3 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -189,7 +189,7 @@ struct mci_data {
 };
 
 /** host information */
-struct mci_platformdata {
+struct mci_host {
 	struct device_d *hw_dev;	/**< the host MCI hardware device */
 	unsigned voltages;
 	unsigned host_caps;	/**< Host's interface capabilities, refer MMC_VDD_* and FIXME */
@@ -198,9 +198,9 @@ struct mci_platformdata {
 	unsigned clock;		/**< Current clock used to talk to the card */
 	unsigned bus_width;	/**< used data bus width to the card */
 
-	int (*init)(struct device_d*, struct device_d*);	/**< init the host interface */
-	void (*set_ios)(struct device_d*, struct device_d*, unsigned, unsigned);	/**< change host interface settings */
-	int (*send_cmd)(struct device_d*, struct mci_cmd*, struct mci_data*);	/**< handle a command */
+	int (*init)(struct mci_host*, struct device_d*);	/**< init the host interface */
+	void (*set_ios)(struct mci_host*, struct device_d*, unsigned, unsigned);	/**< change host interface settings */
+	int (*send_cmd)(struct mci_host*, struct mci_cmd*, struct mci_data*);	/**< handle a command */
 };
 
 /** MMC/SD and interface instance information */
@@ -220,7 +220,7 @@ struct mci {
 	int ready_for_use;	/** true if already probed */
 };
 
-int mci_register(struct mci_platformdata*);
+int mci_register(struct mci_host*);
 
 #define GET_HOST_DATA(x) (x->priv)
 #define GET_HOST_PDATA(x) (x->platform_data)
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 2/3] mci: Add i.MX27/31 driver
  2010-10-07 15:37 Sascha Hauer
  2010-10-07 15:37 ` [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers Sascha Hauer
@ 2010-10-07 15:37 ` Sascha Hauer
  2010-10-07 15:37 ` [PATCH 3/3] ARM pca100: Add mci support Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2010-10-07 15:37 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/Kconfig  |    7 +
 drivers/mci/Makefile |    1 +
 drivers/mci/imx.c    |  521 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 529 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mci/imx.c

diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 644c0a3..0bc4254 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -41,4 +41,11 @@ config MCI_S3C
 	  Enable this entry to add support to read and write SD cards on a
 	  Samsung S3C24xx based system.
 
+config MCI_IMX
+	bool "i.MX"
+	depends on ARCH_IMX27 || ARCH_IMX31
+	help
+	  Enable this entry to add support to read and write SD cards on a
+	  Freescale i.MX based system.
+
 endif
diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
index be18446..f393e93 100644
--- a/drivers/mci/Makefile
+++ b/drivers/mci/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_MCI)	+= mci-core.o
 obj-$(CONFIG_MCI_STM378X) += stm378x.o
 obj-$(CONFIG_MCI_S3C) += s3c.o
+obj-$(CONFIG_MCI_IMX) += imx.o
diff --git a/drivers/mci/imx.c b/drivers/mci/imx.c
new file mode 100644
index 0000000..91e1095
--- /dev/null
+++ b/drivers/mci/imx.c
@@ -0,0 +1,521 @@
+/*
+ *  This is a driver for the SDHC controller found in Freescale MX2/MX3
+ *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
+ *  Unlike the hardware found on MX1, this hardware just works and does
+ *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *
+ *  Copyright (C) 2009 Ilya Yanok, <yanok@emcraft.com>
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ *  derived from pxamci.c by Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <mci.h>
+#include <malloc.h>
+#include <errno.h>
+#include <clock.h>
+#include <init.h>
+#include <driver.h>
+#include <mach/clock.h>
+#include <asm/io.h>
+
+#define DRIVER_NAME "imx-mmc"
+
+struct mxcmci_regs {
+	u32 str_stp_clk;
+	u32 status;
+	u32 clk_rate;
+	u32 cmd_dat_cont;
+	u32 res_to;
+	u32 read_to;
+	u32 blk_len;
+	u32 nob;
+	u32 rev_no;
+	u32 int_cntr;
+	u32 cmd;
+	u32 arg;
+	u32 pad;
+	u32 res_fifo;
+	u32 buffer_access;
+};
+
+#define STR_STP_CLK_RESET               (1 << 3)
+#define STR_STP_CLK_START_CLK           (1 << 1)
+#define STR_STP_CLK_STOP_CLK            (1 << 0)
+
+#define STATUS_CARD_INSERTION		(1 << 31)
+#define STATUS_CARD_REMOVAL		(1 << 30)
+#define STATUS_YBUF_EMPTY		(1 << 29)
+#define STATUS_XBUF_EMPTY		(1 << 28)
+#define STATUS_YBUF_FULL		(1 << 27)
+#define STATUS_XBUF_FULL		(1 << 26)
+#define STATUS_BUF_UND_RUN		(1 << 25)
+#define STATUS_BUF_OVFL			(1 << 24)
+#define STATUS_SDIO_INT_ACTIVE		(1 << 14)
+#define STATUS_END_CMD_RESP		(1 << 13)
+#define STATUS_WRITE_OP_DONE		(1 << 12)
+#define STATUS_DATA_TRANS_DONE		(1 << 11)
+#define STATUS_READ_OP_DONE		(1 << 11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK	(3 << 10)
+#define STATUS_CARD_BUS_CLK_RUN		(1 << 8)
+#define STATUS_BUF_READ_RDY		(1 << 7)
+#define STATUS_BUF_WRITE_RDY		(1 << 6)
+#define STATUS_RESP_CRC_ERR		(1 << 5)
+#define STATUS_CRC_READ_ERR		(1 << 3)
+#define STATUS_CRC_WRITE_ERR		(1 << 2)
+#define STATUS_TIME_OUT_RESP		(1 << 1)
+#define STATUS_TIME_OUT_READ		(1 << 0)
+#define STATUS_ERR_MASK			0x2f
+
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF	(1 << 12)
+#define CMD_DAT_CONT_STOP_READWAIT	(1 << 11)
+#define CMD_DAT_CONT_START_READWAIT	(1 << 10)
+#define CMD_DAT_CONT_BUS_WIDTH_4	(2 << 8)
+#define CMD_DAT_CONT_INIT		(1 << 7)
+#define CMD_DAT_CONT_WRITE		(1 << 4)
+#define CMD_DAT_CONT_DATA_ENABLE	(1 << 3)
+#define CMD_DAT_CONT_RESPONSE_48BIT_CRC	(1 << 0)
+#define CMD_DAT_CONT_RESPONSE_136BIT	(2 << 0)
+#define CMD_DAT_CONT_RESPONSE_48BIT	(3 << 0)
+
+#define INT_SDIO_INT_WKP_EN		(1 << 18)
+#define INT_CARD_INSERTION_WKP_EN	(1 << 17)
+#define INT_CARD_REMOVAL_WKP_EN		(1 << 16)
+#define INT_CARD_INSERTION_EN		(1 << 15)
+#define INT_CARD_REMOVAL_EN		(1 << 14)
+#define INT_SDIO_IRQ_EN			(1 << 13)
+#define INT_DAT0_EN			(1 << 12)
+#define INT_BUF_READ_EN			(1 << 4)
+#define INT_BUF_WRITE_EN		(1 << 3)
+#define INT_END_CMD_RES_EN		(1 << 2)
+#define INT_WRITE_OP_DONE_EN		(1 << 1)
+#define INT_READ_OP_EN			(1 << 0)
+
+struct mxcmci_host {
+	struct mci_host		mci;
+	struct mxcmci_regs	*base;
+	int			irq;
+	int			detect_irq;
+	int			dma;
+	int			do_dma;
+	unsigned int		power_mode;
+
+	struct mci_cmd		*cmd;
+	struct mci_data		*data;
+
+	unsigned int		dma_nents;
+	unsigned int		datasize;
+	unsigned int		dma_dir;
+
+	u16			rev_no;
+	unsigned int		cmdat;
+
+	int			clock;
+};
+
+#define to_mxcmci(mci)	container_of(mci, struct mxcmci_host, mci)
+
+static void mxcmci_softreset(struct mxcmci_host *host)
+{
+	int i;
+
+	/* reset sequence */
+	writew(STR_STP_CLK_RESET, &host->base->str_stp_clk);
+	writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
+			&host->base->str_stp_clk);
+
+	for (i = 0; i < 8; i++)
+		writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
+
+	writew(0xff, &host->base->res_to);
+}
+
+static void mxcmci_setup_data(struct mxcmci_host *host, struct mci_data *data)
+{
+	unsigned int nob = data->blocks;
+	unsigned int blksz = data->blocksize;
+	unsigned int datasize = nob * blksz;
+
+	host->data = data;
+
+	writew(nob, &host->base->nob);
+	writew(blksz, &host->base->blk_len);
+	host->datasize = datasize;
+}
+
+static int mxcmci_start_cmd(struct mxcmci_host *host, struct mci_cmd *cmd,
+		unsigned int cmdat)
+{
+	if (host->cmd != NULL)
+		printf("mxcmci: error!\n");
+	host->cmd = cmd;
+
+	switch (cmd->resp_type) {
+	case MMC_RSP_R1: /* short CRC, OPCODE */
+	case MMC_RSP_R1b:/* short CRC, OPCODE, BUSY */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
+		break;
+	case MMC_RSP_R2: /* long 136 bit + CRC */
+		cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
+		break;
+	case MMC_RSP_R3: /* short */
+		cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
+		break;
+	case MMC_RSP_NONE:
+		break;
+	default:
+		printf("mxcmci: unhandled response type 0x%x\n",
+				cmd->resp_type);
+		return -EINVAL;
+	}
+
+	writew(cmd->cmdidx, &host->base->cmd);
+	writel(cmd->cmdarg, &host->base->arg);
+	writew(cmdat, &host->base->cmd_dat_cont);
+
+	return 0;
+}
+
+static void mxcmci_finish_request(struct mxcmci_host *host,
+		struct mci_cmd *cmd, struct mci_data *data)
+{
+	host->cmd = NULL;
+	host->data = NULL;
+}
+
+static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
+{
+	int data_error = 0;
+
+	if (stat & STATUS_ERR_MASK) {
+		printf("request failed. status: 0x%08x\n",
+				stat);
+		if (stat & STATUS_CRC_READ_ERR) {
+			data_error = -EILSEQ;
+		} else if (stat & STATUS_CRC_WRITE_ERR) {
+			u32 err_code = (stat >> 9) & 0x3;
+			if (err_code == 2) /* No CRC response */
+				data_error = -ETIMEDOUT;
+			else
+				data_error = -EILSEQ;
+		} else if (stat & STATUS_TIME_OUT_READ) {
+			data_error = -ETIMEDOUT;
+		} else {
+			data_error = -EIO;
+		}
+	}
+
+	host->data = NULL;
+
+	return data_error;
+}
+
+static int mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
+{
+	struct mci_cmd *cmd = host->cmd;
+	int i;
+	u32 a, b, c;
+	u32 *resp = (u32 *)cmd->response;
+
+	if (!cmd)
+		return 0;
+
+	if (stat & STATUS_TIME_OUT_RESP) {
+		printf("CMD TIMEOUT\n");
+		return -ETIMEDOUT;
+	} else if (stat & STATUS_RESP_CRC_ERR && cmd->resp_type & MMC_RSP_CRC) {
+		printf("cmd crc error\n");
+		return -EILSEQ;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			for (i = 0; i < 4; i++) {
+				a = readw(&host->base->res_fifo);
+				b = readw(&host->base->res_fifo);
+				resp[i] = a << 16 | b;
+			}
+		} else {
+			a = readw(&host->base->res_fifo);
+			b = readw(&host->base->res_fifo);
+			c = readw(&host->base->res_fifo);
+			resp[0] = a << 24 | b << 8 | c >> 8;
+		}
+	}
+	return 0;
+}
+
+static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
+{
+	u32 stat;
+	uint64_t start = get_time_ns();
+
+	do {
+		stat = readl(&host->base->status);
+		if (stat & STATUS_ERR_MASK)
+			return stat;
+		if (is_timeout(start, SECOND))
+			return STATUS_TIME_OUT_READ;
+		if (stat & mask)
+			return 0;
+	} while (1);
+}
+
+static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		*buf++ = readl(&host->base->buffer_access);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host,
+				STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+		if (stat)
+			return stat;
+		tmp = readl(&host->base->buffer_access);
+		memcpy(b, &tmp, bytes);
+	}
+
+	return 0;
+}
+
+static int mxcmci_push(struct mxcmci_host *host, const void *_buf, int bytes)
+{
+	unsigned int stat;
+	const u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+		writel(*buf++, &host->base->buffer_access);
+		bytes -= 4;
+	}
+
+	if (bytes) {
+		const u8 *b = (u8 *)buf;
+		u32 tmp;
+
+		stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+		if (stat)
+			return stat;
+
+		memcpy(&tmp, b, bytes);
+		writel(tmp, &host->base->buffer_access);
+	}
+
+	stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+	if (stat)
+		return stat;
+
+	return 0;
+}
+
+static int mxcmci_transfer_data(struct mxcmci_host *host)
+{
+	struct mci_data *data = host->data;
+	int stat;
+	unsigned long length;
+
+	length = data->blocks * data->blocksize;
+	host->datasize = 0;
+
+	if (data->flags & MMC_DATA_READ) {
+		stat = mxcmci_pull(host, data->dest, length);
+		if (stat)
+			return stat;
+		host->datasize += length;
+	} else {
+		stat = mxcmci_push(host, (const void *)(data->src), length);
+		if (stat)
+			return stat;
+		host->datasize += length;
+		stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
+		if (stat)
+			return stat;
+	}
+	return 0;
+}
+
+static int mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
+{
+	int datastat;
+	int ret;
+
+	ret = mxcmci_read_response(host, stat);
+
+	if (ret) {
+		mxcmci_finish_request(host, host->cmd, host->data);
+		return ret;
+	}
+
+	if (!host->data) {
+		mxcmci_finish_request(host, host->cmd, host->data);
+		return 0;
+	}
+
+	datastat = mxcmci_transfer_data(host);
+	ret = mxcmci_finish_data(host, datastat);
+	mxcmci_finish_request(host, host->cmd, host->data);
+	return ret;
+}
+
+static int mxcmci_request(struct mci_host *mci, struct mci_cmd *cmd,
+		struct mci_data *data)
+{
+	struct mxcmci_host *host = to_mxcmci(mci);
+	unsigned int cmdat = host->cmdat;
+	u32 stat;
+	int ret;
+
+	host->cmdat &= ~CMD_DAT_CONT_INIT;
+	if (data) {
+		mxcmci_setup_data(host, data);
+
+		cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+
+		if (data->flags & MMC_DATA_WRITE)
+			cmdat |= CMD_DAT_CONT_WRITE;
+	}
+
+	if ((ret = mxcmci_start_cmd(host, cmd, cmdat))) {
+		mxcmci_finish_request(host, cmd, data);
+		return ret;
+	}
+
+	do {
+		stat = readl(&host->base->status);
+		writel(stat, &host->base->status);
+	} while (!(stat & STATUS_END_CMD_RESP));
+
+	return mxcmci_cmd_done(host, stat);
+}
+
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
+{
+	unsigned int divider;
+	int prescaler = 0;
+	unsigned long clk_in = imx_get_mmcclk();
+
+	while (prescaler <= 0x800) {
+		for (divider = 1; divider <= 0xF; divider++) {
+			int x;
+
+			x = (clk_in / (divider + 1));
+
+			if (prescaler)
+				x /= (prescaler * 2);
+
+			if (x <= clk_ios)
+				break;
+		}
+		if (divider < 0x10)
+			break;
+
+		if (prescaler == 0)
+			prescaler = 1;
+		else
+			prescaler <<= 1;
+	}
+
+	writew((prescaler << 4) | divider, &host->base->clk_rate);
+}
+
+static void mxcmci_set_ios(struct mci_host *mci, struct device_d *dev,
+		unsigned bus_width, unsigned clock)
+{
+	struct mxcmci_host *host = to_mxcmci(mci);
+
+	if (bus_width == 4)
+		host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+	else
+		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
+
+	if (clock) {
+		mxcmci_set_clk_rate(host, clock);
+		writew(STR_STP_CLK_START_CLK, &host->base->str_stp_clk);
+	} else {
+		writew(STR_STP_CLK_STOP_CLK, &host->base->str_stp_clk);
+	}
+
+	host->clock = clock;
+}
+
+static int mxcmci_init(struct mci_host *mci, struct device_d *dev)
+{
+	struct mxcmci_host *host = to_mxcmci(mci);
+
+	mxcmci_softreset(host);
+
+	host->rev_no = readw(&host->base->rev_no);
+	if (host->rev_no != 0x400) {
+		printf("wrong rev.no. 0x%08x. aborting.\n",
+			host->rev_no);
+		return -ENODEV;
+	}
+
+	/* recommended in data sheet */
+	writew(0x2db4, &host->base->read_to);
+
+	writel(0, &host->base->int_cntr);
+
+	return 0;
+}
+
+static int mxcmci_probe(struct device_d *dev)
+{
+	struct mxcmci_host *host;
+
+	host = xzalloc(sizeof(*host));
+
+//	sprintf(mci->name, "MXC MCI");
+	host->mci.send_cmd = mxcmci_request;
+	host->mci.set_ios = mxcmci_set_ios;
+	host->mci.init = mxcmci_init;
+	host->mci.host_caps = MMC_MODE_4BIT;
+
+	host->base = (struct mxcmci_regs *)dev->map_base;
+
+	host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	host->mci.f_min = imx_get_mmcclk() >> 7;
+	host->mci.f_max = imx_get_mmcclk() >> 1;
+
+	mci_register(&host->mci);
+
+	return 0;
+}
+
+static struct driver_d mxcmci_driver = {
+        .name  = DRIVER_NAME,
+        .probe = mxcmci_probe,
+};
+
+static int mxcmci_init_driver(void)
+{
+        register_driver(&mxcmci_driver);
+        return 0;
+}
+
+device_initcall(mxcmci_init_driver);
+
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 3/3] ARM pca100: Add mci support
  2010-10-07 15:37 Sascha Hauer
  2010-10-07 15:37 ` [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers Sascha Hauer
  2010-10-07 15:37 ` [PATCH 2/3] mci: Add i.MX27/31 driver Sascha Hauer
@ 2010-10-07 15:37 ` Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2010-10-07 15:37 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/phycard-i.MX27/pca100.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 7328a6c..7460c00 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -109,6 +109,11 @@ static void pca100_usbh_init(void)
 }
 #endif
 
+static struct device_d mmc_dev = {
+	.name		= "imx-mmc",
+	.map_base	= 0x10014000,
+};
+
 #ifdef CONFIG_MMU
 static void pca100_mmu_init(void)
 {
@@ -180,8 +185,17 @@ static int pca100_devices_init(void)
 		PD23_AF_USBH2_DATA2,
 		PD24_AF_USBH2_DATA1,
 		PD26_AF_USBH2_DATA5,
+		/* SDHC */
+		PB4_PF_SD2_D0,
+		PB5_PF_SD2_D1,
+		PB6_PF_SD2_D2,
+		PB7_PF_SD2_D3,
+		PB8_PF_SD2_CMD,
+		PB9_PF_SD2_CLK,
 	};
 
+	PCCR0 |= PCCR0_SDHC2_EN;
+
 	/* disable the usb phys */
 	imx_gpio_mode((GPIO_PORTB | 23) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_output(GPIO_PORTB + 23, 1);
@@ -195,6 +209,7 @@ static int pca100_devices_init(void)
 	register_device(&nand_dev);
 	register_device(&sdram_dev);
 	register_device(&fec_dev);
+	register_device(&mmc_dev);
 
 	PCCR1 |= PCCR1_PERCLK2_EN;
 
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2010-10-07 15:38 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-07 15:37 Sascha Hauer
2010-10-07 15:37 ` [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers Sascha Hauer
2010-10-07 15:37 ` [PATCH 2/3] mci: Add i.MX27/31 driver Sascha Hauer
2010-10-07 15:37 ` [PATCH 3/3] ARM pca100: Add mci support Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox