From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 03/10] Don't use a sector buffer on stack
Date: Fri, 8 Oct 2010 18:30:51 +0200 [thread overview]
Message-ID: <1286555458-20125-4-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1286555458-20125-1-git-send-email-jbe@pengutronix.de>
Using a temp. buffer for a disk sector on the stack, seems not work. Doing so
lets the system run crazy (the stack seems to be destroyd). Don't know the
correct stack handling on ARM, but (IMHO) I also can exclude any writing across
the buffer boundaries.
Using a temp. buffer via malloc() runs also on ARM.
Note: This patch was required to add MCI card support, which can be handled
like a disk drive.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
drivers/ata/disk_drive.c | 17 ++++++++++++-----
1 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/disk_drive.c b/drivers/ata/disk_drive.c
index 5b22e49..15ef5f4 100644
--- a/drivers/ata/disk_drive.c
+++ b/drivers/ata/disk_drive.c
@@ -34,6 +34,7 @@
#include <errno.h>
#include <string.h>
#include <linux/kernel.h>
+#include <malloc.h>
/**
* Description of one partition table entry (D*S type)
@@ -269,15 +270,18 @@ static struct file_operations disk_ops = {
*/
static int disk_probe(struct device_d *dev)
{
- uint8_t sector[512];
+ uint8_t *sector;
int rc;
struct ata_interface *intf = dev->platform_data;
struct cdev *disk_cdev;
+ sector = xmalloc(SECTOR_SIZE);
+
rc = intf->read(dev, 0, 1, sector);
if (rc != 0) {
dev_err(dev, "Cannot read MBR of this device\n");
- return -1;
+ rc = -ENODEV;
+ goto on_error;
}
/* It seems a valuable disk. Register it */
@@ -306,7 +310,8 @@ static int disk_probe(struct device_d *dev)
if ((sector[510] != 0x55) || (sector[511] != 0xAA)) {
dev_info(dev, "No partition table found\n");
- return 0;
+ rc = 0;
+ goto on_error;
}
/* guess the size of this drive */
@@ -314,9 +319,11 @@ static int disk_probe(struct device_d *dev)
dev_info(dev, "Drive size guessed to %u kiB\n", dev->size / 1024);
disk_cdev->size = dev->size;
- disk_register_partitions(dev, (struct partition_entry*)§or[446]);
+ rc = disk_register_partitions(dev, (struct partition_entry*)§or[446]);
- return 0;
+on_error:
+ free(sector);
+ return rc;
}
#ifdef CONFIG_ATA_BIOS
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-10-08 16:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-08 16:30 [PATCH v2] Add MCI card support to barebox Juergen Beisert
2010-10-08 16:30 ` [PATCH 01/10] x-functions do not return in case of failure Juergen Beisert
2010-10-08 16:30 ` [PATCH 02/10] Make the disk driver less noisy Juergen Beisert
2010-10-08 16:30 ` Juergen Beisert [this message]
2010-10-08 16:30 ` [PATCH 04/10] Don't try to guess the size of a disk if its size value is already given Juergen Beisert
2010-10-08 16:30 ` [PATCH 05/10] Add MCI card support to barebox Juergen Beisert
2010-10-08 16:30 ` [PATCH 06/10] Add i.MX23 MCI card support Juergen Beisert
2010-10-08 16:30 ` [PATCH 07/10] Add S3C2440 " Juergen Beisert
2010-10-08 16:30 ` [PATCH 08/10] i.MX27: Add mmc clock support in order to add an i.MX MCI driver Juergen Beisert
2010-10-08 16:30 ` [PATCH 09/10] mci: Add i.MX27/31 driver Juergen Beisert
2010-10-08 16:30 ` [PATCH 10/10] ARM pca100: Add mci support Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286555458-20125-4-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox