From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1P5ELn-0002P0-Ql for barebox@lists.infradead.org; Mon, 11 Oct 2010 09:07:21 +0000 From: Juergen Beisert Date: Mon, 11 Oct 2010 11:06:58 +0200 Message-Id: <1286788020-14077-3-git-send-email-jbe@pengutronix.de> In-Reply-To: <1286788020-14077-1-git-send-email-jbe@pengutronix.de> References: <1286788020-14077-1-git-send-email-jbe@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/4] Add the driver for the i.MX23 debug UART To: barebox@lists.infradead.org The i.MX23 comes with a special UART dedicated for debugging purposes. This one is mostly used for the console the user can reach. Signed-off-by: Juergen Beisert --- drivers/serial/Kconfig | 5 + drivers/serial/Makefile | 1 + drivers/serial/stm-serial.c | 202 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 208 insertions(+), 0 deletions(-) create mode 100644 drivers/serial/stm-serial.c diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c7ea2d9..3a8882f 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -18,6 +18,11 @@ config DRIVER_SERIAL_IMX default y bool "i.MX serial driver" +config DRIVER_SERIAL_STM378X + depends on ARCH_STM + default y + bool "i.MX23 serial driver" + config DRIVER_SERIAL_NETX depends on ARCH_NETX default y diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 959290e..9f0e12b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_DRIVER_SERIAL_ARM_DCC) += arm_dcc.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_DRIVER_SERIAL_IMX) += serial_imx.o +obj-$(CONFIG_DRIVER_SERIAL_STM378X) += stm-serial.o obj-$(CONFIG_DRIVER_SERIAL_ATMEL) += atmel.o obj-$(CONFIG_DRIVER_SERIAL_NETX) += serial_netx.o obj-$(CONFIG_DRIVER_SERIAL_LINUX_COMSOLE) += linux_console.o diff --git a/drivers/serial/stm-serial.c b/drivers/serial/stm-serial.c new file mode 100644 index 0000000..90563f5 --- /dev/null +++ b/drivers/serial/stm-serial.c @@ -0,0 +1,202 @@ +/* + * (C) Copyright 2010 Juergen Beisert - Pengutronix + * + * This code was inspired by some patches made for u-boot covered by: + * (c) 2007 Sascha Hauer + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * Note: This is the driver for the debug UART. There is + * only one of these UARTs on the Freescale/SigmaTel parts + */ + +#include +#include +#include +#include +#include +#include +#include + +#define UARTDBGDR 0x00 +#define UARTDBGFR 0x18 +# define TXFF (1 << 5) +# define RXFE (1 << 4) +#define UARTDBGIBRD 0x24 +#define UARTDBGFBRD 0x28 +#define UARTDBGLCR_H 0x2c +# define WLEN8 (3 << 5) +# define WLEN7 (2 << 5) +# define WLEN6 (1 << 5) +# define WLEN5 (0 << 5) +# define FEN (1 << 4) +#define UARTDBGCR 0x30 +# define UARTEN (1 << 0) +# define TXE (1 << 8) +# define RXE (1 << 9) +#define UARTDBGIMSC 0x38 + +struct stm_serial_local { + struct console_device cdev; + int baudrate; + struct notifier_block notify; +}; + +static void stm_serial_putc(struct console_device *cdev, char c) +{ + struct device_d *dev = cdev->dev; + + /* Wait for room in TX FIFO */ + while (readl(dev->map_base + UARTDBGFR) & TXFF) + ; + + writel(c, dev->map_base + UARTDBGDR); +} + +static int stm_serial_tstc(struct console_device *cdev) +{ + struct device_d *dev = cdev->dev; + + /* Check if RX FIFO is not empty */ + return !(readl(dev->map_base + UARTDBGFR) & RXFE); +} + +static int stm_serial_getc(struct console_device *cdev) +{ + struct device_d *dev = cdev->dev; + + /* Wait while TX FIFO is empty */ + while (readl(dev->map_base + UARTDBGFR) & RXFE) + ; + + return readl(dev->map_base + UARTDBGDR) & 0xff; +} + +static void stm_serial_flush(struct console_device *cdev) +{ + struct device_d *dev = cdev->dev; + + /* Wait for TX FIFO empty */ + while (readl(dev->map_base + UARTDBGFR) & TXFF) + ; +} + +static int stm_serial_setbaudrate(struct console_device *cdev, int new_baudrate) +{ + struct device_d *dev = cdev->dev; + struct stm_serial_local *local = container_of(cdev, struct stm_serial_local, cdev); + uint32_t cr, lcr_h, quot; + + /* Disable everything */ + cr = readl(dev->map_base + UARTDBGCR); + writel(0, dev->map_base + UARTDBGCR); + + /* Calculate and set baudrate */ + quot = (imx_get_xclk() * 4000) / new_baudrate; + writel(quot & 0x3f, dev->map_base + UARTDBGFBRD); + writel(quot >> 6, dev->map_base + UARTDBGIBRD); + + /* Set 8n1 mode, enable FIFOs */ + lcr_h = WLEN8 | FEN; + writel(lcr_h, dev->map_base + UARTDBGLCR_H); + + /* Re-enable debug UART */ + writel(cr, dev->map_base + UARTDBGCR); + + local->baudrate = new_baudrate; + + return 0; +} + +static int stm_clocksource_clock_change(struct notifier_block *nb, unsigned long event, void *data) +{ + struct stm_serial_local *local = container_of(nb, struct stm_serial_local, notify); + + return stm_serial_setbaudrate(&local->cdev, local->baudrate); +} + +static int stm_serial_init_port(struct console_device *cdev) +{ + struct device_d *dev = cdev->dev; + /* + * If the board specific file registers this console we should force + * the usage of the debug UART pins, to be able to let the user see + * the output, even if the board file forgets to configure these pins. + */ + imx_gpio_mode(PWM1_DUART_TX); + imx_gpio_mode(PWM0_DUART_RX); + + /* Disable UART */ + writel(0, dev->map_base + UARTDBGCR); + + /* Mask interrupts */ + writel(0, dev->map_base + UARTDBGIMSC); + + return 0; +} + +static struct stm_serial_local stm_device = { + .cdev = { + .f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR, + .tstc = stm_serial_tstc, + .putc = stm_serial_putc, + .getc = stm_serial_getc, + .flush = stm_serial_flush, + .setbrg = stm_serial_setbaudrate, + }, +}; + +static int stm_serial_probe(struct device_d *dev) +{ + stm_device.cdev.dev = dev; + dev->type_data = &stm_device.cdev; + + stm_serial_init_port(&stm_device.cdev); + stm_serial_setbaudrate(&stm_device.cdev, CONFIG_BAUDRATE); + + /* Enable UART */ + writel(TXE | RXE | UARTEN, dev->map_base + UARTDBGCR); + + console_register(&stm_device.cdev); + stm_device.notify.notifier_call = stm_clocksource_clock_change; + clock_register_client(&stm_device.notify); + + return 0; +} + +static void stm_serial_remove(struct device_d *dev) +{ + struct console_device *cdev = dev->type_data; + + stm_serial_flush(cdev); +} + +static struct driver_d stm_serial_driver = { + .name = "stm_serial", + .probe = stm_serial_probe, + .remove = stm_serial_remove, +}; + +static int stm_serial_init(void) +{ + register_driver(&stm_serial_driver); + return 0; +} + +console_initcall(stm_serial_init); -- 1.7.2.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox