mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/17] mci: Add i.MX esdhc support
Date: Mon, 11 Oct 2010 13:28:10 +0200	[thread overview]
Message-ID: <1286796505-16049-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1286796505-16049-1-git-send-email-s.hauer@pengutronix.de>

This adds a driver for the esdhc controller found on Freescale
i.MX25/35/51 SoCs.

This code is based on the U-Boot driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/Kconfig     |   13 ++
 drivers/mci/Makefile    |    1 +
 drivers/mci/imx-esdhc.c |  512 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/mci/imx-esdhc.h |  164 +++++++++++++++
 4 files changed, 690 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mci/imx-esdhc.c
 create mode 100644 drivers/mci/imx-esdhc.h

diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 0bc4254..b1f2773 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -48,4 +48,17 @@ config MCI_IMX
 	  Enable this entry to add support to read and write SD cards on a
 	  Freescale i.MX based system.
 
+config MCI_IMX_ESDHC
+	bool "i.MX esdhc"
+	depends on ARCH_IMX25 || ARCH_IMX35 || ARCH_IMX51
+	help
+	  Enable this entry to add support to read and write SD cards on a
+	  Freescale i.MX25/35/51 based system.
+
+config MCI_IMX_ESDHC_PIO
+	bool "use PIO mode"
+	depends on MCI_IMX_ESDHC
+	help
+	  mostly useful for debugging. Normally you should use DMA.
+
 endif
diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
index f393e93..a10cb47 100644
--- a/drivers/mci/Makefile
+++ b/drivers/mci/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_MCI)	+= mci-core.o
 obj-$(CONFIG_MCI_STM378X) += stm378x.o
 obj-$(CONFIG_MCI_S3C) += s3c.o
 obj-$(CONFIG_MCI_IMX) += imx.o
+obj-$(CONFIG_MCI_IMX_ESDHC) += imx-esdhc.o
diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
new file mode 100644
index 0000000..63cd059
--- /dev/null
+++ b/drivers/mci/imx-esdhc.c
@@ -0,0 +1,512 @@
+/*
+ * Copyright 2007,2010 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the pxa mmc code:
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <mci.h>
+#include <clock.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <mach/clock.h>
+
+#include "imx-esdhc.h"
+
+struct fsl_esdhc {
+	u32	dsaddr;
+	u32	blkattr;
+	u32	cmdarg;
+	u32	xfertyp;
+	u32	cmdrsp0;
+	u32	cmdrsp1;
+	u32	cmdrsp2;
+	u32	cmdrsp3;
+	u32	datport;
+	u32	prsstat;
+	u32	proctl;
+	u32	sysctl;
+	u32	irqstat;
+	u32	irqstaten;
+	u32	irqsigen;
+	u32	autoc12err;
+	u32	hostcapblt;
+	u32	wml;
+	char	reserved1[8];
+	u32	fevt;
+	char	reserved2[168];
+	u32	hostver;
+	char	reserved3[780];
+	u32	scr;
+};
+
+struct fsl_esdhc_host {
+	struct mci_host		mci;
+	struct fsl_esdhc	*regs;
+	u32			no_snoop;
+	unsigned long		cur_clock;
+	struct device_d		*dev;
+};
+
+#define to_fsl_esdhc(mci)	container_of(mci, struct fsl_esdhc_host, mci)
+
+/* Return the XFERTYP flags for a given command and data packet */
+u32 esdhc_xfertyp(struct mci_cmd *cmd, struct mci_data *data)
+{
+	u32 xfertyp = 0;
+
+	if (data) {
+		xfertyp |= XFERTYP_DPSEL;
+#ifndef CONFIG_MCI_IMX_ESDHC_PIO
+		xfertyp |= XFERTYP_DMAEN;
+#endif
+		if (data->blocks > 1) {
+			xfertyp |= XFERTYP_MSBSEL;
+			xfertyp |= XFERTYP_BCEN;
+		}
+
+		if (data->flags & MMC_DATA_READ)
+			xfertyp |= XFERTYP_DTDSEL;
+	}
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		xfertyp |= XFERTYP_CCCEN;
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		xfertyp |= XFERTYP_CICEN;
+	if (cmd->resp_type & MMC_RSP_136)
+		xfertyp |= XFERTYP_RSPTYP_136;
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		xfertyp |= XFERTYP_RSPTYP_48_BUSY;
+	else if (cmd->resp_type & MMC_RSP_PRESENT)
+		xfertyp |= XFERTYP_RSPTYP_48;
+
+	return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
+}
+
+#ifdef CONFIG_MCI_IMX_ESDHC_PIO
+/*
+ * PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
+ */
+static void
+esdhc_pio_read_write(struct mci_host *mci, struct mci_data *data)
+{
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+	u32 blocks;
+	char *buffer;
+	u32 databuf;
+	u32 size;
+	u32 irqstat;
+	u32 timeout;
+
+	if (data->flags & MMC_DATA_READ) {
+		blocks = data->blocks;
+		buffer = data->dest;
+		while (blocks) {
+			timeout = PIO_TIMEOUT;
+			size = data->blocksize;
+			irqstat = esdhc_read32(&regs->irqstat);
+			while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BREN)
+				&& --timeout);
+			if (timeout <= 0) {
+				printf("\nData Read Failed in PIO Mode.");
+				return;
+			}
+			while (size && (!(irqstat & IRQSTAT_TC))) {
+				udelay(100); /* Wait before last byte transfer complete */
+				irqstat = esdhc_read32(&regs->irqstat);
+				databuf = esdhc_read32(&regs->datport);
+				*((u32 *)buffer) = databuf;
+				buffer += 4;
+				size -= 4;
+			}
+			blocks--;
+		}
+	} else {
+		blocks = data->blocks;
+		buffer = (char *)data->src;
+		while (blocks) {
+			timeout = PIO_TIMEOUT;
+			size = data->blocksize;
+			irqstat = esdhc_read32(&regs->irqstat);
+			while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BWEN)
+				&& --timeout);
+			if (timeout <= 0) {
+				printf("\nData Write Failed in PIO Mode.");
+				return;
+			}
+			while (size && (!(irqstat & IRQSTAT_TC))) {
+				udelay(100); /* Wait before last byte transfer complete */
+				databuf = *((u32 *)buffer);
+				buffer += 4;
+				size -= 4;
+				irqstat = esdhc_read32(&regs->irqstat);
+				esdhc_write32(&regs->datport, databuf);
+			}
+			blocks--;
+		}
+	}
+}
+#endif
+
+static int esdhc_setup_data(struct mci_host *mci, struct mci_data *data)
+{
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+#ifndef CONFIG_MCI_IMX_ESDHC_PIO
+	u32 wml_value;
+
+	wml_value = data->blocksize/4;
+
+	if (data->flags & MMC_DATA_READ) {
+		if (wml_value > 0x10)
+			wml_value = 0x10;
+
+		esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
+		esdhc_write32(&regs->dsaddr, (u32)data->dest);
+	} else {
+		if (wml_value > 0x80)
+			wml_value = 0x80;
+		if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
+			printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
+			return -ETIMEDOUT;
+		}
+
+		esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
+					wml_value << 16);
+		esdhc_write32(&regs->dsaddr, (u32)data->src);
+	}
+#else	/* CONFIG_MCI_IMX_ESDHC_PIO */
+	if (!(data->flags & MMC_DATA_READ)) {
+		if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
+			printf("\nThe SD card is locked. "
+				"Can not write to a locked card.\n\n");
+			return -ETIMEDOUT;
+		}
+		esdhc_write32(&regs->dsaddr, (u32)data->src);
+	} else
+		esdhc_write32(&regs->dsaddr, (u32)data->dest);
+#endif	/* CONFIG_MCI_IMX_ESDHC_PIO */
+
+	esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
+
+	return 0;
+}
+
+
+/*
+ * Sends a command out on the bus.  Takes the mci pointer,
+ * a command pointer, and an optional data pointer.
+ */
+static int
+esdhc_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
+{
+	u32	xfertyp;
+	u32	irqstat;
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+
+	esdhc_write32(&regs->irqstat, -1);
+
+	/* Wait for the bus to be idle */
+	while ((esdhc_read32(&regs->prsstat) & PRSSTAT_CICHB) ||
+			(esdhc_read32(&regs->prsstat) & PRSSTAT_CIDHB))
+		;
+
+	while (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA)
+		;
+
+	/* Wait at least 8 SD clock cycles before the next command */
+	/*
+	 * Note: This is way more than 8 cycles, but 1ms seems to
+	 * resolve timing issues with some cards
+	 */
+	udelay(1000);
+
+	/* Set up for a data transfer if we have one */
+	if (data) {
+		int err;
+
+		err = esdhc_setup_data(mci, data);
+		if(err)
+			return err;
+		if (data->flags & MMC_DATA_WRITE) {
+			dma_flush_range((unsigned long)data->src,
+				(unsigned long)(data->src + 512));
+		} else
+			dma_clean_range((unsigned long)data->src,
+				(unsigned long)(data->src + 512));
+
+	}
+
+	/* Figure out the transfer arguments */
+	xfertyp = esdhc_xfertyp(cmd, data);
+
+	/* Send the command */
+	esdhc_write32(&regs->cmdarg, cmd->cmdarg);
+	esdhc_write32(&regs->xfertyp, xfertyp);
+
+	/* Wait for the command to complete */
+	while (!(esdhc_read32(&regs->irqstat) & IRQSTAT_CC))
+		;
+
+	irqstat = esdhc_read32(&regs->irqstat);
+	esdhc_write32(&regs->irqstat, irqstat);
+
+	if (irqstat & CMD_ERR)
+		return -EIO;
+
+	if (irqstat & IRQSTAT_CTOE)
+		return -ETIMEDOUT;
+
+	/* Copy the response to the response buffer */
+	if (cmd->resp_type & MMC_RSP_136) {
+		u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
+
+		cmdrsp3 = esdhc_read32(&regs->cmdrsp3);
+		cmdrsp2 = esdhc_read32(&regs->cmdrsp2);
+		cmdrsp1 = esdhc_read32(&regs->cmdrsp1);
+		cmdrsp0 = esdhc_read32(&regs->cmdrsp0);
+		cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
+		cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
+		cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
+		cmd->response[3] = (cmdrsp0 << 8);
+	} else
+		cmd->response[0] = esdhc_read32(&regs->cmdrsp0);
+
+	/* Wait until all of the blocks are transferred */
+	if (data) {
+#ifdef CONFIG_MCI_IMX_ESDHC_PIO
+		esdhc_pio_read_write(mci, data);
+#else
+		do {
+			irqstat = esdhc_read32(&regs->irqstat);
+
+			if (irqstat & DATA_ERR)
+				return -EIO;
+
+			if (irqstat & IRQSTAT_DTOE)
+				return -ETIMEDOUT;
+		} while (!(irqstat & IRQSTAT_TC) &&
+				(esdhc_read32(&regs->prsstat) & PRSSTAT_DLA));
+
+		if (data->flags & MMC_DATA_READ) {
+			dma_inv_range((unsigned long)data->dest,
+					(unsigned long)(data->dest + 512));
+		}
+#endif
+	}
+
+	esdhc_write32(&regs->irqstat, -1);
+
+	return 0;
+}
+
+void set_sysctl(struct mci_host *mci, u32 clock)
+{
+	int div, pre_div;
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+	int sdhc_clk = imx_get_mmcclk();
+	u32 clk;
+
+	if (clock < mci->f_min)
+		clock = mci->f_min;
+
+	pre_div = 0;
+
+	for (pre_div = 1; pre_div < 256; pre_div <<= 1) {
+		if (sdhc_clk / pre_div < clock * 16)
+			break;
+	};
+
+	div = sdhc_clk / pre_div / clock;
+
+	if (sdhc_clk / pre_div / div > clock)
+		div++;
+
+	host->cur_clock = sdhc_clk / pre_div / div;
+
+	div -= 1;
+	pre_div >>= 1;
+
+	dev_dbg(host->dev, "set clock: wanted: %d got: %d\n", clock, host->cur_clock);
+	dev_dbg(host->dev, "pre_div: %d div: %d\n", pre_div, div);
+
+	clk = (pre_div << 8) | (div << 4);
+
+	esdhc_clrbits32(&regs->sysctl, SYSCTL_CKEN);
+
+	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
+
+	udelay(10000);
+
+	clk = SYSCTL_PEREN | SYSCTL_CKEN;
+
+	esdhc_setbits32(&regs->sysctl, clk);
+}
+
+static void esdhc_set_ios(struct mci_host *mci, struct device_d *dev,
+		unsigned bus_width, unsigned clock)
+{
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+
+	/* Set the clock speed */
+	set_sysctl(mci, clock);
+
+	/* Set the bus width */
+	esdhc_clrbits32(&regs->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
+
+	if (bus_width == 4)
+		esdhc_setbits32(&regs->proctl, PROCTL_DTW_4);
+	else if (bus_width == 8)
+		esdhc_setbits32(&regs->proctl, PROCTL_DTW_8);
+
+}
+
+static int esdhc_init(struct mci_host *mci, struct device_d *dev)
+{
+	struct fsl_esdhc_host *host = to_fsl_esdhc(mci);
+	struct fsl_esdhc *regs = host->regs;
+	int timeout = 1000;
+	int ret = 0;
+
+	/* Enable cache snooping */
+	if (host && !host->no_snoop)
+		esdhc_write32(&regs->scr, 0x00000040);
+
+	/* Reset the entire host controller */
+	esdhc_write32(&regs->sysctl, SYSCTL_RSTA);
+
+	/* Wait until the controller is available */
+	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
+		udelay(1000);
+
+	esdhc_write32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
+
+	/* Set the initial clock speed */
+	set_sysctl(mci, 400000);
+
+	/* Disable the BRR and BWR bits in IRQSTAT */
+	esdhc_clrbits32(&regs->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
+
+	/* Put the PROCTL reg back to the default */
+	esdhc_write32(&regs->proctl, PROCTL_INIT);
+
+	/* Set timout to the maximum value */
+	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
+
+	return ret;
+}
+
+static int esdhc_reset(struct fsl_esdhc *regs)
+{
+	uint64_t start;
+
+	/* reset the controller */
+	esdhc_write32(&regs->sysctl, SYSCTL_RSTA);
+
+	start = get_time_ns();
+	/* hardware clears the bit when it is done */
+	while (1) {
+		if (!(esdhc_read32(&regs->sysctl) & SYSCTL_RSTA))
+			break;
+		if (is_timeout(start, 100 * MSECOND)) {
+			printf("MMC/SD: Reset never completed.\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int fsl_esdhc_probe(struct device_d *dev)
+{
+	struct fsl_esdhc_host *host;
+	struct mci_host *mci;
+	u32 caps;
+	int ret;
+
+	host = xzalloc(sizeof(*host));
+	mci = &host->mci;
+
+	host->dev = dev;
+	host->regs = (struct fsl_esdhc *)dev->map_base;
+
+	/* First reset the eSDHC controller */
+	ret = esdhc_reset(host->regs);
+	if (ret) {
+		free(host);
+		return ret;
+	}
+
+	caps = esdhc_read32(&host->regs->hostcapblt);
+
+	if (caps & ESDHC_HOSTCAPBLT_VS18)
+		mci->voltages |= MMC_VDD_165_195;
+	if (caps & ESDHC_HOSTCAPBLT_VS30)
+		mci->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+	if (caps & ESDHC_HOSTCAPBLT_VS33)
+		mci->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	mci->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
+
+	if (caps & ESDHC_HOSTCAPBLT_HSS)
+		mci->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	host->mci.send_cmd = esdhc_send_cmd;
+	host->mci.set_ios = esdhc_set_ios;
+	host->mci.init = esdhc_init;
+	host->mci.host_caps = MMC_MODE_4BIT;
+
+	host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	host->mci.f_min = imx_get_mmcclk() >> 12;
+	if (host->mci.f_min < 200000)
+		host->mci.f_min = 200000;
+	host->mci.f_max = imx_get_mmcclk();
+
+	mci_register(&host->mci);
+
+	return 0;
+}
+
+static struct driver_d fsl_esdhc_driver = {
+        .name  = "imx-esdhc",
+        .probe = fsl_esdhc_probe,
+};
+
+static int fsl_esdhc_init_driver(void)
+{
+        register_driver(&fsl_esdhc_driver);
+        return 0;
+}
+
+device_initcall(fsl_esdhc_init_driver);
+
diff --git a/drivers/mci/imx-esdhc.h b/drivers/mci/imx-esdhc.h
new file mode 100644
index 0000000..19fed5a
--- /dev/null
+++ b/drivers/mci/imx-esdhc.h
@@ -0,0 +1,164 @@
+/*
+ * FSL SD/MMC Defines
+ *-------------------------------------------------------------------
+ *
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *-------------------------------------------------------------------
+ *
+ */
+
+#ifndef  __FSL_ESDHC_H__
+#define	__FSL_ESDHC_H__
+
+#include <errno.h>
+#include <asm/byteorder.h>
+
+/* FSL eSDHC-specific constants */
+#define SYSCTL			0x0002e02c
+#define SYSCTL_INITA		0x08000000
+#define SYSCTL_TIMEOUT_MASK	0x000f0000
+#define SYSCTL_CLOCK_MASK	0x0000fff0
+#define SYSCTL_RSTA		0x01000000
+#define SYSCTL_CKEN		0x00000008
+#define SYSCTL_PEREN		0x00000004
+#define SYSCTL_HCKEN		0x00000002
+#define SYSCTL_IPGEN		0x00000001
+#define SYSCTL_RSTA		0x01000000
+
+#define IRQSTAT			0x0002e030
+#define IRQSTAT_DMAE		(0x10000000)
+#define IRQSTAT_AC12E		(0x01000000)
+#define IRQSTAT_DEBE		(0x00400000)
+#define IRQSTAT_DCE		(0x00200000)
+#define IRQSTAT_DTOE		(0x00100000)
+#define IRQSTAT_CIE		(0x00080000)
+#define IRQSTAT_CEBE		(0x00040000)
+#define IRQSTAT_CCE		(0x00020000)
+#define IRQSTAT_CTOE		(0x00010000)
+#define IRQSTAT_CINT		(0x00000100)
+#define IRQSTAT_CRM		(0x00000080)
+#define IRQSTAT_CINS		(0x00000040)
+#define IRQSTAT_BRR		(0x00000020)
+#define IRQSTAT_BWR		(0x00000010)
+#define IRQSTAT_DINT		(0x00000008)
+#define IRQSTAT_BGE		(0x00000004)
+#define IRQSTAT_TC		(0x00000002)
+#define IRQSTAT_CC		(0x00000001)
+
+#define CMD_ERR		(IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
+#define DATA_ERR	(IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE)
+
+#define IRQSTATEN		0x0002e034
+#define IRQSTATEN_DMAE		(0x10000000)
+#define IRQSTATEN_AC12E		(0x01000000)
+#define IRQSTATEN_DEBE		(0x00400000)
+#define IRQSTATEN_DCE		(0x00200000)
+#define IRQSTATEN_DTOE		(0x00100000)
+#define IRQSTATEN_CIE		(0x00080000)
+#define IRQSTATEN_CEBE		(0x00040000)
+#define IRQSTATEN_CCE		(0x00020000)
+#define IRQSTATEN_CTOE		(0x00010000)
+#define IRQSTATEN_CINT		(0x00000100)
+#define IRQSTATEN_CRM		(0x00000080)
+#define IRQSTATEN_CINS		(0x00000040)
+#define IRQSTATEN_BRR		(0x00000020)
+#define IRQSTATEN_BWR		(0x00000010)
+#define IRQSTATEN_DINT		(0x00000008)
+#define IRQSTATEN_BGE		(0x00000004)
+#define IRQSTATEN_TC		(0x00000002)
+#define IRQSTATEN_CC		(0x00000001)
+
+#define PRSSTAT			0x0002e024
+#define PRSSTAT_CLSL		(0x00800000)
+#define PRSSTAT_WPSPL		(0x00080000)
+#define PRSSTAT_CDPL		(0x00040000)
+#define PRSSTAT_CINS		(0x00010000)
+#define PRSSTAT_BREN		(0x00000800)
+#define PRSSTAT_BWEN		(0x00000400)
+#define PRSSTAT_DLA		(0x00000004)
+#define PRSSTAT_CICHB		(0x00000002)
+#define PRSSTAT_CIDHB		(0x00000001)
+
+#define PROCTL			0x0002e028
+#define PROCTL_INIT		0x00000020
+#define PROCTL_DTW_4		0x00000002
+#define PROCTL_DTW_8		0x00000004
+
+#define CMDARG			0x0002e008
+
+#define XFERTYP			0x0002e00c
+#define XFERTYP_CMD(x)		((x & 0x3f) << 24)
+#define XFERTYP_CMDTYP_NORMAL	0x0
+#define XFERTYP_CMDTYP_SUSPEND	0x00400000
+#define XFERTYP_CMDTYP_RESUME	0x00800000
+#define XFERTYP_CMDTYP_ABORT	0x00c00000
+#define XFERTYP_DPSEL		0x00200000
+#define XFERTYP_CICEN		0x00100000
+#define XFERTYP_CCCEN		0x00080000
+#define XFERTYP_RSPTYP_NONE	0
+#define XFERTYP_RSPTYP_136	0x00010000
+#define XFERTYP_RSPTYP_48	0x00020000
+#define XFERTYP_RSPTYP_48_BUSY	0x00030000
+#define XFERTYP_MSBSEL		0x00000020
+#define XFERTYP_DTDSEL		0x00000010
+#define XFERTYP_AC12EN		0x00000004
+#define XFERTYP_BCEN		0x00000002
+#define XFERTYP_DMAEN		0x00000001
+
+#define CINS_TIMEOUT		1000
+#define PIO_TIMEOUT		100000
+
+#define DSADDR		0x2e004
+
+#define CMDRSP0		0x2e010
+#define CMDRSP1		0x2e014
+#define CMDRSP2		0x2e018
+#define CMDRSP3		0x2e01c
+
+#define DATPORT		0x2e020
+
+#define WML		0x2e044
+#define WML_WRITE	0x00010000
+#define WML_RD_WML_MASK	0xff
+#define WML_WR_WML_MASK	0xff0000
+
+#define BLKATTR		0x2e004
+#define BLKATTR_CNT(x)	((x & 0xffff) << 16)
+#define BLKATTR_SIZE(x)	(x & 0x1fff)
+#define MAX_BLK_CNT	0x7fff	/* so malloc will have enough room with 32M */
+
+#define ESDHC_HOSTCAPBLT_VS18	0x04000000
+#define ESDHC_HOSTCAPBLT_VS30	0x02000000
+#define ESDHC_HOSTCAPBLT_VS33	0x01000000
+#define ESDHC_HOSTCAPBLT_SRS	0x00800000
+#define ESDHC_HOSTCAPBLT_DMAS	0x00400000
+#define ESDHC_HOSTCAPBLT_HSS	0x00200000
+
+struct fsl_esdhc_cfg {
+	u32	esdhc_base;
+	u32	no_snoop;
+};
+
+#define esdhc_read32(a)			readl(a)
+#define esdhc_write32(a, v)		writel(v,a)
+#define esdhc_clrsetbits32(a, c, s)	writel((readl(a) & ~(c)) | (s), (a))
+#define esdhc_clrbits32(a, c)		writel(readl(a) & ~(c), (a))
+#define esdhc_setbits32(a, s)		writel(readl(a) | (s), (a))
+
+#endif  /* __FSL_ESDHC_H__ */
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2010-10-11 11:28 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-11 11:28 Patches for -next Sascha Hauer
2010-10-11 11:28 ` [PATCH 01/17] i.MX27: Add support for SDHC pins Sascha Hauer
2010-10-11 11:28 ` Sascha Hauer [this message]
2010-10-11 11:28 ` [PATCH 03/17] mci: print error code on failure Sascha Hauer
2010-10-11 11:28 ` [PATCH 04/17] spi i.MX: add spi version namespace to register defines Sascha Hauer
2010-10-11 11:28 ` [PATCH 05/17] spi i.MX: redirect functions to version specific functions Sascha Hauer
2010-10-11 11:28 ` [PATCH 06/17] spi i.MX: Add i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 07/17] Move mfd drivers to drivers/mfd Sascha Hauer
2010-10-11 11:28 ` [PATCH 08/17] move include files for mfd drivers to include/mfd Sascha Hauer
2010-10-11 11:28 ` [PATCH 09/17] mfd mc13892: Add spi support Sascha Hauer
2010-10-11 11:28 ` [PATCH 10/17] mfd mc13892: support reading the revision Sascha Hauer
2010-10-11 11:28 ` [PATCH 11/17] mci: handle SD cards < 2.0 correctly Sascha Hauer
2010-10-11 12:48   ` Juergen Beisert
2010-10-11 13:07     ` Belisko Marek
2010-10-11 13:47       ` Juergen Beisert
2010-10-11 12:53   ` Juergen Beisert
2010-10-11 11:28 ` [PATCH 12/17] mci: align write buffer if necessary Sascha Hauer
2010-10-11 11:28 ` [PATCH 13/17] defaultenv: handle disk partitions Sascha Hauer
2010-10-11 12:26   ` Juergen Beisert
2010-10-11 12:50     ` Sascha Hauer
2010-10-11 12:59       ` Juergen Beisert
2010-10-11 13:54         ` Sascha Hauer
2010-10-11 14:22           ` Juergen Beisert
2010-10-12  6:51             ` Jean-Christophe PLAGNIOL-VILLARD
2010-10-11 11:28 ` [PATCH 14/17] imx_serial: Add mx51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function Sascha Hauer
2010-10-11 11:28 ` [PATCH 16/17] ARM i.MX: Add basic i.MX51 support Sascha Hauer
2010-10-11 11:28 ` [PATCH 17/17] ARM i.MX51: Add babbage board support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1286796505-16049-3-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox