mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: s.hauer@pengutronix.de
Cc: barebox@lists.infradead.org
Subject: [PATCH] eukrea_cpuimx27: update board support
Date: Wed, 13 Oct 2010 12:14:27 +0200	[thread overview]
Message-ID: <1286964867-16922-1-git-send-email-eric@eukrea.com> (raw)

- fix for LCD support
- environment update (last one before trying to use the generic env)

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 arch/arm/boards/eukrea_cpuimx27/env/bin/boot      |   12 +++++++-----
 arch/arm/boards/eukrea_cpuimx27/env/bin/init      |   10 ++++++++++
 arch/arm/boards/eukrea_cpuimx27/env/config        |    9 +++++++--
 arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c |    3 +++
 4 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/boot b/arch/arm/boards/eukrea_cpuimx27/env/bin/boot
index 7272e56..0e1c80a 100644
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/boot
+++ b/arch/arm/boards/eukrea_cpuimx27/env/bin/boot
@@ -27,12 +27,14 @@ else
 	bootargs="$bootargs ip=off"
 fi
 
-if [ x$root = xnand ]; then
-	bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
-elif [ x$root = xnor ]; then
-	bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
+if [ x$rootfstype = xubifs ]; then
+	bootargs="$bootargs root=ubi0:$ubiroot ubi.mtd=$rootpartnum rootfstype=ubifs"
 else
-	bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
+	if [ x$root = xnand ]; then
+		bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
+	elif [ x$root = xnor ]; then
+		bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
+	fi
 fi
 
 bootargs="$bootargs mtdparts=physmap-flash.0:$nor_parts;mxc_nand:$nand_parts"
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/bin/init b/arch/arm/boards/eukrea_cpuimx27/env/bin/init
index 3bfd194..aefd67c 100644
--- a/arch/arm/boards/eukrea_cpuimx27/env/bin/init
+++ b/arch/arm/boards/eukrea_cpuimx27/env/bin/init
@@ -16,11 +16,21 @@ if [ -e /dev/nand0 ]; then
 	source /env/bin/hush_hack 
 fi
 
+if [ -f /env/logo.bmp ]; then
+	bmp /env/logo.bmp
+	fb0.enable=1
+elif [ -f /env/logo.bmp.lzo ]; then
+	unlzo /env/logo.bmp.lzo /logo.bmp
+	bmp /logo.bmp
+	fb0.enable=1
+fi
+
 if [ -z $eth0.ethaddr ]; then
 	while [ -z $eth0.ethaddr ]; do
 		readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
 	done
 	echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
+	saveenv
 fi
 
 echo
diff --git a/arch/arm/boards/eukrea_cpuimx27/env/config b/arch/arm/boards/eukrea_cpuimx27/env/config
index 505ada3..6449cdf 100644
--- a/arch/arm/boards/eukrea_cpuimx27/env/config
+++ b/arch/arm/boards/eukrea_cpuimx27/env/config
@@ -3,9 +3,11 @@
 # can be either 'net', 'nor' or 'nand''
 kernel=nor
 root=nor
+rootfstype=ubifs
 
-uimage=mx27/uImage
-jffs2=mx27/rootfs.jffs2
+basedir=cpuimx27
+uimage=$basedir/uImage
+rootfs=$basedir/rootfs
 
 autoboot_timeout=1
 
@@ -19,6 +21,9 @@ rootpart_nor="/dev/mtdblock3"
 nand_parts="-(nand)"
 rootpart_nand=""
 
+rootpartnum=3
+ubiroot="eukrea-cpuimx27-rootfs"
+
 nfsroot=""
 
 # use 'dhcp' to do dhcp in barebox and in kernel
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index 4d1797b..c7570cf 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -275,6 +275,7 @@ static int eukrea_cpuimx27_devices_init(void)
 		PA29_PF_VSYNC,
 		PA31_PF_OE_ACD,
 		GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT,
+		GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT,
 #endif
 	};
 
@@ -311,6 +312,8 @@ static int eukrea_cpuimx27_devices_init(void)
 	register_device(&imxfb_dev);
 	gpio_direction_output(GPIO_PORTE | 5, 0);
 	gpio_set_value(GPIO_PORTE | 5, 1);
+	gpio_direction_output(GPIO_PORTA | 25, 0);
+	gpio_set_value(GPIO_PORTA | 25, 1);
 #endif
 
 	armlinux_add_dram(&sdram_dev);
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

                 reply	other threads:[~2010-10-13 10:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1286964867-16922-1-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox