From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/13] i.MX nand: optimize nand boot code for size
Date: Fri, 22 Oct 2010 15:15:20 +0200 [thread overview]
Message-ID: <1287753331-7696-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1287753331-7696-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mtd/nand/Kconfig | 16 ++++
drivers/mtd/nand/nand_imx.c | 196 +++++++++++++++++++++++++++++--------------
2 files changed, 150 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 475499a..bc95195 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -18,6 +18,22 @@ config NAND_IMX_BOOT
prompt "Support Starting barebox from NAND"
depends on NAND_IMX || NAND_IMX_V2
+choice
+ depends on NAND_IMX_BOOT
+ default NAND_IMX_BOOT_512_2K
+ prompt "select nand pagesize you want to support booting from"
+
+config NAND_IMX_BOOT_512
+ bool "512 byte page size"
+
+config NAND_IMX_BOOT_2K
+ bool "2048 byte page size"
+
+config NAND_IMX_BOOT_512_2K
+ bool "512 byte and 2048 byte pagesize"
+
+endchoice
+
config NAND_OMAP_GPMC
tristate "NAND Flash Support for GPMC based OMAP platforms"
depends on ((ARCH_OMAP2 || ARCH_OMAP3) && GPMC)
diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
index 5454e32..63ba188 100644
--- a/drivers/mtd/nand/nand_imx.c
+++ b/drivers/mtd/nand/nand_imx.c
@@ -222,7 +222,7 @@ static void memcpy32(void *trg, const void *src, int size)
* @param max_retries number of retry attempts (separated by 1 us)
* @param param parameter for debug
*/
-static void __nand_boot_init wait_op_done(struct imx_nand_host *host)
+static void wait_op_done(struct imx_nand_host *host)
{
u32 tmp;
int i;
@@ -247,7 +247,7 @@ static void __nand_boot_init wait_op_done(struct imx_nand_host *host)
*
* @param cmd command for NAND Flash
*/
-static void __nand_boot_init send_cmd(struct imx_nand_host *host, u16 cmd)
+static void send_cmd(struct imx_nand_host *host, u16 cmd)
{
MTD_DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
@@ -276,7 +276,7 @@ static void __nand_boot_init send_cmd(struct imx_nand_host *host, u16 cmd)
* @param addr address to be written to NFC.
* @param islast True if this is the last address cycle for command
*/
-static void __nand_boot_init noinline send_addr(struct imx_nand_host *host, u16 addr)
+static void send_addr(struct imx_nand_host *host, u16 addr)
{
MTD_DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
@@ -294,7 +294,7 @@ static void __nand_boot_init noinline send_addr(struct imx_nand_host *host, u16
* @param buf_id Specify Internal RAM Buffer number (0-3)
* @param spare_only set true if only the spare area is transferred
*/
-static void __nand_boot_init send_page(struct imx_nand_host *host,
+static void send_page(struct imx_nand_host *host,
unsigned int ops)
{
int bufs, i;
@@ -1013,20 +1013,87 @@ static struct driver_d imx_nand_driver = {
};
#ifdef CONFIG_NAND_IMX_BOOT
+static void __nand_boot_init noinline imx_nandboot_wait_op_done(void *regs)
+{
+ u32 r;
+
+ while (1) {
+ r = readw(regs + NFC_CONFIG2);
+ if (r & NFC_INT)
+ break;
+ };
+
+ r &= ~NFC_INT;
+
+ writew(r, regs + NFC_CONFIG2);
+}
+
+/*
+ * This function issues the specified command to the NAND device and
+ * waits for completion.
+ *
+ * @param cmd command for NAND Flash
+ */
+static void __nand_boot_init imx_nandboot_send_cmd(void *regs, u16 cmd)
+{
+ writew(cmd, regs + NFC_FLASH_CMD);
+ writew(NFC_CMD, regs + NFC_CONFIG2);
+
+ imx_nandboot_wait_op_done(regs);
+}
+
+/*
+ * This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command.
+ *
+ * @param addr address to be written to NFC.
+ * @param islast True if this is the last address cycle for command
+ */
+static void __nand_boot_init noinline imx_nandboot_send_addr(void *regs, u16 addr)
+{
+ writew(addr, regs + NFC_FLASH_ADDR);
+ writew(NFC_ADDR, regs + NFC_CONFIG2);
+
+ /* Wait for operation to complete */
+ imx_nandboot_wait_op_done(regs);
+}
-static void __nand_boot_init nfc_addr(struct imx_nand_host *host, u32 offs)
+static void __nand_boot_init imx_nandboot_nfc_addr(void *regs, u32 offs, int pagesize_2k)
{
- if (host->pagesize_2k) {
- send_addr(host, offs & 0xff);
- send_addr(host, offs & 0xff);
- send_addr(host, (offs >> 11) & 0xff);
- send_addr(host, (offs >> 19) & 0xff);
- send_addr(host, (offs >> 27) & 0xff);
+ imx_nandboot_send_addr(regs, offs & 0xff);
+
+ if (pagesize_2k) {
+ imx_nandboot_send_addr(regs, offs & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 11) & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 19) & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 27) & 0xff);
+ imx_nandboot_send_cmd(regs, NAND_CMD_READSTART);
} else {
- send_addr(host, offs & 0xff);
- send_addr(host, (offs >> 9) & 0xff);
- send_addr(host, (offs >> 17) & 0xff);
- send_addr(host, (offs >> 25) & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 9) & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 17) & 0xff);
+ imx_nandboot_send_addr(regs, (offs >> 25) & 0xff);
+ }
+}
+
+static void __nand_boot_init imx_nandboot_send_page(void *regs,
+ unsigned int ops, int pagesize_2k)
+{
+ int bufs, i;
+
+ if (nfc_is_v1() && pagesize_2k)
+ bufs = 4;
+ else
+ bufs = 1;
+
+ for (i = 0; i < bufs; i++) {
+ /* NANDFC buffer 0 is used for page read/write */
+ writew(i, regs + NFC_BUF_ADDR);
+
+ writew(ops, regs + NFC_CONFIG2);
+
+ /* Wait for operation to complete */
+ imx_nandboot_wait_op_done(regs);
}
}
@@ -1040,38 +1107,49 @@ static void __nand_boot_init __memcpy32(void *trg, const void *src, int size)
*t++ = *s++;
}
-void __nand_boot_init imx_nand_load_image(void *dest, int size)
+static int __maybe_unused is_pagesize_2k(void)
{
- struct imx_nand_host host;
- u32 tmp, page, block, blocksize, pagesize;
#ifdef CONFIG_ARCH_IMX21
- tmp = readl(IMX_SYSTEM_CTL_BASE + 0x14);
- if (tmp & (1 << 5))
- host.pagesize_2k = 1;
+ if (readl(IMX_SYSTEM_CTL_BASE + 0x14) & (1 << 5))
+ return 1;
else
- host.pagesize_2k = 0;
+ return 0;
#endif
#ifdef CONFIG_ARCH_IMX27
- tmp = readl(IMX_SYSTEM_CTL_BASE + 0x14);
- if (tmp & (1 << 5))
- host.pagesize_2k = 1;
+ if (readl(IMX_SYSTEM_CTL_BASE + 0x14) & (1 << 5))
+ return 1;
else
- host.pagesize_2k = 0;
+ return 0;
#endif
#ifdef CONFIG_ARCH_IMX31
- tmp = readl(IMX_CCM_BASE + CCM_RCSR);
- if (tmp & RCSR_NFMS)
- host.pagesize_2k = 1;
+ if (readl(IMX_CCM_BASE + CCM_RCSR) & RCSR_NFMS)
+ return 1;
else
- host.pagesize_2k = 0;
+ return 0;
#endif
#if defined(CONFIG_ARCH_IMX35) || defined(CONFIG_ARCH_IMX25)
if (readl(IMX_CCM_BASE + CCM_RCSR) & (1 << 8))
- host.pagesize_2k = 1;
+ return 1;
else
- host.pagesize_2k = 0;
+ return 0;
+#endif
+}
+
+void __nand_boot_init imx_nand_load_image(void *dest, int size)
+{
+ u32 tmp, page, block, blocksize, pagesize;
+ int pagesize_2k = 1;
+ void *regs, *base, *spare0;
+
+#if defined(CONFIG_NAND_IMX_BOOT_512)
+ pagesize_2k = 0;
+#elif defined(CONFIG_NAND_IMX_BOOT_2K)
+ pagesize_2k = 1;
+#else
+ pagesize_2k = is_pagesize_2k();
#endif
- if (host.pagesize_2k) {
+
+ if (pagesize_2k) {
pagesize = 2048;
blocksize = 128 * 1024;
} else {
@@ -1079,45 +1157,43 @@ void __nand_boot_init imx_nand_load_image(void *dest, int size)
blocksize = 16 * 1024;
}
- host.base = (void __iomem *)IMX_NFC_BASE;
+ base = (void __iomem *)IMX_NFC_BASE;
if (nfc_is_v21()) {
- host.regs = host.base + 0x1000;
- host.spare0 = host.base + 0x1000;
- host.spare_len = 64;
+ regs = base + 0x1000;
+ spare0 = base + 0x1000;
} else if (nfc_is_v1()) {
- host.regs = host.base;
- host.spare0 = host.base + 0x800;
- host.spare_len = 16;
+ regs = base;
+ spare0 = base + 0x800;
}
- send_cmd(&host, NAND_CMD_RESET);
+ imx_nandboot_send_cmd(regs, NAND_CMD_RESET);
/* preset operation */
/* Unlock the internal RAM Buffer */
- writew(0x2, host.regs + NFC_CONFIG);
+ writew(0x2, regs + NFC_CONFIG);
/* Unlock Block Command for given address range */
- writew(0x4, host.regs + NFC_WRPROT);
+ writew(0x4, regs + NFC_WRPROT);
- tmp = readw(host.regs + NFC_CONFIG1);
+ tmp = readw(regs + NFC_CONFIG1);
tmp |= NFC_ECC_EN;
if (nfc_is_v21())
/* currently no support for 218 byte OOB with stronger ECC */
tmp |= NFC_ECC_MODE;
tmp &= ~(NFC_SP_EN | NFC_INT_MSK);
- writew(tmp, host.regs + NFC_CONFIG1);
+ writew(tmp, regs + NFC_CONFIG1);
if (nfc_is_v21()) {
- if (host.pagesize_2k) {
- tmp = readw(host.regs + NFC_SPAS);
+ if (pagesize_2k) {
+ tmp = readw(regs + NFC_SPAS);
tmp &= 0xff00;
tmp |= NFC_SPAS_64;
- writew(tmp, host.regs + NFC_SPAS);
+ writew(tmp, regs + NFC_SPAS);
} else {
- tmp = readw(host.regs + NFC_SPAS);
+ tmp = readw(regs + NFC_SPAS);
tmp &= 0xff00;
tmp |= NFC_SPAS_16;
- writew(tmp, host.regs + NFC_SPAS);
+ writew(tmp, regs + NFC_SPAS);
}
}
@@ -1132,25 +1208,21 @@ void __nand_boot_init imx_nand_load_image(void *dest, int size)
block * blocksize +
page * pagesize);
- send_cmd(&host, NAND_CMD_READ0);
- nfc_addr(&host, block * blocksize +
- page * pagesize);
- if (host.pagesize_2k)
- send_cmd(&host, NAND_CMD_READSTART);
- send_page(&host, NFC_OUTPUT);
+ imx_nandboot_send_cmd(regs, NAND_CMD_READ0);
+ imx_nandboot_nfc_addr(regs, block * blocksize +
+ page * pagesize, pagesize_2k);
+ imx_nandboot_send_page(regs, NFC_OUTPUT, pagesize_2k);
page++;
- if (host.pagesize_2k) {
- if ((readw(host.spare0) & 0xff)
- != 0xff)
+ if (pagesize_2k) {
+ if ((readw(spare0) & 0xff) != 0xff)
continue;
} else {
- if ((readw(host.spare0 + 4) & 0xff00)
- != 0xff00)
+ if ((readw(spare0 + 4) & 0xff00) != 0xff00)
continue;
}
- __memcpy32(dest, host.base, pagesize);
+ __memcpy32(dest, base, pagesize);
dest += pagesize;
size -= pagesize;
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-10-22 13:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 13:15 more patches for next Sascha Hauer
2010-10-22 13:15 ` [PATCH 01/13] ARM pca100: Use a flash bbt Sascha Hauer
2010-10-22 13:15 ` Sascha Hauer [this message]
2010-10-22 13:15 ` [PATCH 03/13] mci-core: add multiple block support Sascha Hauer
2010-10-22 13:40 ` Juergen Beisert
2010-10-22 14:03 ` Juergen Beisert
2010-10-22 13:15 ` [PATCH 04/13] i.MX51: Fix mmcclk rate Sascha Hauer
2010-10-22 13:15 ` [PATCH 05/13] i.MX esdctl: Add register bits from redboot Sascha Hauer
2010-10-22 13:15 ` [PATCH 06/13] i.MX35 regs: Add watchdog base Sascha Hauer
2010-10-22 13:15 ` [PATCH 07/13] fb: i.MX IPU: remove unnecessary printf Sascha Hauer
2010-10-22 13:15 ` [PATCH 08/13] fb: i.MX IPU: move fb_info initialization to a single function Sascha Hauer
2010-10-22 13:15 ` [PATCH 09/13] fb: i.MX IPU: fold mx3fb_set_par into its only user Sascha Hauer
2010-10-22 13:15 ` [PATCH 10/13] mci: align data for commands Sascha Hauer
2010-10-22 13:41 ` Juergen Beisert
2010-10-22 13:15 ` [PATCH 11/13] ARM: Add Garz+Fricke Cupid board support Sascha Hauer
2010-10-22 13:15 ` [PATCH 12/13] defaultenv: fix mtdparts Sascha Hauer
2010-10-22 13:15 ` [PATCH 13/13] ARM: Add defconfig for Garz+Fricke cupid board Sascha Hauer
2010-10-26 9:20 ` more patches for next Juergen Beisert
2010-10-26 9:48 ` Marc Kleine-Budde
2010-10-26 18:58 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287753331-7696-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox