From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 01/11] imx: Separate framebuffer platformdata and the videomode
Date: Fri, 22 Oct 2010 18:53:15 +0200 [thread overview]
Message-ID: <1287766405-1646-2-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1287766405-1646-1-git-send-email-jbe@pengutronix.de>
This patch separates the imx platformdata and its videomode in two structures,
in order to support more than one defined videomode in the boardfile. This
is intended to support runtime videomode selection later on. It also uses
now the same videomode setup style than the imx-fpu based systems (like the
i.MX35).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 28 +++++++++--------
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 28 +++++++++--------
arch/arm/boards/guf-neso/board.c | 28 +++++++++--------
arch/arm/boards/imx21ads/imx21ads.c | 34 +++++++++++----------
arch/arm/boards/pcm038/pcm038.c | 28 +++++++++--------
arch/arm/mach-imx/include/mach/imxfb.h | 2 +-
drivers/video/imx.c | 6 ++--
7 files changed, 82 insertions(+), 72 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
index 805ffe2..032897a 100644
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
@@ -120,20 +120,22 @@ static struct device_d nand_dev = {
.platform_data = &nand_info,
};
+static struct fb_videomode cmo_display = {
+ .name = "CMO-QVGA",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = KHZ2PICOS(6500),
+ .hsync_len = 30,
+ .left_margin = 38,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 15,
+ .lower_margin = 4,
+};
+
static struct imx_fb_videomode imxfb_mode = {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .hsync_len = 30,
- .left_margin = 38,
- .right_margin = 20,
- .vsync_len = 3,
- .upper_margin = 15,
- .lower_margin = 4,
- },
+ .mode = &cmo_display,
.pcr = 0xCAD08B80,
.bpp = 16,
};
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index 62fc14e..3ea2466 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -186,20 +186,22 @@ static void eukrea_cpuimx27_mmu_init(void)
#endif
#ifdef CONFIG_DRIVER_VIDEO_IMX
+static struct fb_videomode cmo_display = {
+ .name = "CMO-QVGA",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 156000,
+ .hsync_len = 30,
+ .left_margin = 38,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 15,
+ .lower_margin = 4,
+};
+
static struct imx_fb_videomode imxfb_mode = {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = 156000,
- .hsync_len = 30,
- .left_margin = 38,
- .right_margin = 20,
- .vsync_len = 3,
- .upper_margin = 15,
- .lower_margin = 4,
- },
+ .mode = &cmo_display,
.pcr = 0xFAD08B80,
.bpp = 16,};
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
index 9c85c08..6949675 100644
--- a/arch/arm/boards/guf-neso/board.c
+++ b/arch/arm/boards/guf-neso/board.c
@@ -91,20 +91,22 @@ static struct device_d nand_dev = {
.platform_data = &nand_info,
};
+static struct fb_videomode cpt_display = {
+ .name = "CPT CLAA070LC0JCT",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = KHZ2PICOS(27000),
+ .hsync_len = 1, /* DE only sync */
+ .left_margin = 50,
+ .right_margin = 50,
+ .vsync_len = 1, /* DE only sync */
+ .upper_margin = 10,
+ .lower_margin = 10,
+};
+
static struct imx_fb_videomode imxfb_mode = {
- .mode = {
- .name = "CPT CLAA070LC0JCT",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .hsync_len = 1, /* DE only sync */
- .left_margin = 50,
- .right_margin = 50,
- .vsync_len = 1, /* DE only sync */
- .upper_margin = 10,
- .lower_margin = 10,
- },
+ .mode = &cpt_display,
/*
* - TFT style panel
* - clk enabled while idle
diff --git a/arch/arm/boards/imx21ads/imx21ads.c b/arch/arm/boards/imx21ads/imx21ads.c
index 44d37aa..81006de 100644
--- a/arch/arm/boards/imx21ads/imx21ads.c
+++ b/arch/arm/boards/imx21ads/imx21ads.c
@@ -79,24 +79,26 @@ static struct device_d cs8900_dev = {
// IRQ is connected to UART3_RTS
};
+static struct fb_videomode sharp_display = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679,
+ .left_margin = 6,
+ .right_margin = 16,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+};
+
/* Sharp LQ035Q7DB02 QVGA display */
static struct imx_fb_videomode imx_fb_modedata = {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679,
- .left_margin = 6,
- .right_margin = 16,
- .upper_margin = 8,
- .lower_margin = 10,
- .hsync_len = 2,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
+ .mode = &sharp_display,
.pcr = 0xfb108bc7,
.bpp = 16,
};
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 3a9b413..026e9c0 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -127,20 +127,22 @@ static struct device_d nand_dev = {
.platform_data = &nand_info,
};
+static struct fb_videomode sharp_display = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+};
+
static struct imx_fb_videomode imxfb_mode = {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 7,
- .left_margin = 5,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- },
+ .mode = &sharp_display,
/*
* - HSYNC active high
* - VSYNC active high
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
index 16b43ea..7baa244 100644
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
@@ -50,7 +50,7 @@
#define DMACR_TM(x) ((x) & 0xf)
struct imx_fb_videomode {
- struct fb_videomode mode;
+ struct fb_videomode *mode;
u32 pcr;
unsigned char bpp;
};
diff --git a/drivers/video/imx.c b/drivers/video/imx.c
index ac51858..6ccd77e 100644
--- a/drivers/video/imx.c
+++ b/drivers/video/imx.c
@@ -555,9 +555,9 @@ static int imxfb_probe(struct device_d *dev)
fbi->enable = pdata->enable;
fbi->dev = dev;
info->priv = fbi;
- info->mode = &pdata->mode->mode;
- info->xres = pdata->mode->mode.xres;
- info->yres = pdata->mode->mode.yres;
+ info->mode = pdata->mode->mode;
+ info->xres = pdata->mode->mode->xres;
+ info->yres = pdata->mode->mode->yres;
info->bits_per_pixel = pdata->mode->bpp;
info->fbops = &imxfb_ops;
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2010-10-22 16:53 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 16:53 Add dynamic video initialization to barebox Juergen Beisert
2010-10-22 16:53 ` Juergen Beisert [this message]
2010-10-22 17:46 ` [PATCH 01/11] imx: Separate framebuffer platformdata and the videomode Sascha Hauer
2010-10-23 10:31 ` Juergen Beisert
2010-10-22 16:53 ` [PATCH 02/11] Add more flags for sync control Juergen Beisert
2010-10-22 16:53 ` [PATCH 03/11] Bring in dynamic videomode selection at runtime Juergen Beisert
2010-10-22 17:41 ` Sascha Hauer
2010-10-23 10:35 ` Juergen Beisert
2010-10-22 16:53 ` [PATCH 04/11] Remove the old videomode functions Juergen Beisert
2010-10-22 16:53 ` [PATCH 05/11] Add verbose framebuffer device info Juergen Beisert
2010-10-22 16:53 ` [PATCH 06/11] Adapt the existing imx fb driver to support runtime videomode selection Juergen Beisert
2010-10-22 16:53 ` [PATCH 07/11] Adapt the existing imx-ipu " Juergen Beisert
2010-10-22 17:43 ` Sascha Hauer
2010-10-23 10:36 ` Juergen Beisert
2010-10-22 16:53 ` [PATCH 08/11] Add a video driver for S3C2440 bases platforms Juergen Beisert
2010-10-22 18:56 ` Sascha Hauer
2010-10-23 10:37 ` Juergen Beisert
2010-10-22 16:53 ` [PATCH 09/11] STM378x: Add video driver for this platform Juergen Beisert
2010-10-22 18:59 ` Sascha Hauer
2010-10-23 10:40 ` Juergen Beisert
2010-10-22 16:53 ` [PATCH 10/11] Remove variable size restrictions Juergen Beisert
2010-10-22 16:53 ` [PATCH 11/11] Add doxygen documentation to the framebfuffer code Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287766405-1646-2-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox