* [PATCH 01/17] ARM i.MX51: Add SPBA0 base addresses
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 02/17] ARM i.MX: Add device convenience functions Sascha Hauer
` (15 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/include/mach/imx51-regs.h | 13 ++++++++++++-
1 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-imx/include/mach/imx51-regs.h b/arch/arm/mach-imx/include/mach/imx51-regs.h
index 1719a78..1d241c8 100644
--- a/arch/arm/mach-imx/include/mach/imx51-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx51-regs.h
@@ -91,7 +91,18 @@
#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000)
#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000)
/*
* Memory regions and CS
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 02/17] ARM i.MX: Add device convenience functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
2010-11-02 17:17 ` [PATCH 01/17] ARM i.MX51: Add SPBA0 base addresses Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 03/17] ARM i.MX: Add header protection Sascha Hauer
` (14 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/devices.c | 59 ++++++++++++++++++++++++
arch/arm/mach-imx/include/mach/devices-imx21.h | 33 +++++++++++++
arch/arm/mach-imx/include/mach/devices-imx25.h | 38 +++++++++++++++
arch/arm/mach-imx/include/mach/devices-imx27.h | 54 ++++++++++++++++++++++
arch/arm/mach-imx/include/mach/devices-imx31.h | 35 ++++++++++++++
arch/arm/mach-imx/include/mach/devices-imx35.h | 57 +++++++++++++++++++++++
arch/arm/mach-imx/include/mach/devices-imx51.h | 53 +++++++++++++++++++++
arch/arm/mach-imx/include/mach/devices.h | 17 +++++++
9 files changed, 347 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-imx/devices.c
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx21.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx25.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx27.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx31.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx35.h
create mode 100644 arch/arm/mach-imx/include/mach/devices-imx51.h
create mode 100644 arch/arm/mach-imx/include/mach/devices.h
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ce38566..d000683 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -10,4 +10,4 @@ obj-$(CONFIG_IMX_CLKO) += clko.o
obj-$(CONFIG_IMX_IIM) += iim.o
obj-$(CONFIG_NAND_IMX) += nand.o
obj-y += speed.o
-
+obj-y += devices.o
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
new file mode 100644
index 0000000..dfeae1e
--- /dev/null
+++ b/arch/arm/mach-imx/devices.c
@@ -0,0 +1,59 @@
+#include <common.h>
+#include <driver.h>
+#include <mach/devices.h>
+
+static struct device_d *imx_add_device(char *name, int id, void *base, int size, void *pdata)
+{
+ struct device_d *dev;
+
+ dev = xzalloc(sizeof(*dev));
+ strcpy(dev->name,name);
+ dev->id = id;
+ dev->map_base = (unsigned long)base;
+ dev->size = size;
+ dev->platform_data = pdata;
+
+ register_device(dev);
+
+ return 0;
+}
+
+struct device_d *imx_add_fec(void *base, struct fec_platform_data *pdata)
+{
+ return imx_add_device("fec_imx", -1, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_spi(void *base, int id, struct spi_imx_master *pdata)
+{
+ return imx_add_device("imx_spi", id, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_i2c(void *base, int id, struct i2c_platform_data *pdata)
+{
+ return imx_add_device("i2c-imx", id, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_uart(void *base, int id)
+{
+ return imx_add_device("imx_serial", id, base, 0x1000, NULL);
+}
+
+struct device_d *imx_add_nand(void *base, struct imx_nand_platform_data *pdata)
+{
+ return imx_add_device("imx_nandl", -1, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_fb(void *base, struct imx_fb_platform_data *pdata)
+{
+ return imx_add_device("imxfb", -1, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_ipufb(void *base, struct imx_ipu_fb_platform_data *pdata)
+{
+ return imx_add_device("imx-ipu-fb", -1, base, 0x1000, pdata);
+}
+
+struct device_d *imx_add_mmc(void *base, int id, void *pdata)
+{
+ return imx_add_device("imx-mmc", id, base, 0x1000, pdata);
+}
diff --git a/arch/arm/mach-imx/include/mach/devices-imx21.h b/arch/arm/mach-imx/include/mach/devices-imx21.h
new file mode 100644
index 0000000..1e1fbbd
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx21.h
@@ -0,0 +1,33 @@
+
+#include <mach/devices.h>
+
+static inline struct device_d *imx21_add_uart0(void)
+{
+ return imx_add_uart((void *)IMX_UART1_BASE, 0);
+}
+
+static inline struct device_d *imx21_add_uart1(void)
+{
+ return imx_add_uart((void *)IMX_UART2_BASE, 1);
+}
+
+static inline struct device_d *imx21_add_uart2(void)
+{
+ return imx_add_uart((void *)IMX_UART3_BASE, 2);
+}
+
+static inline struct device_d *imx21_add_uart3(void)
+{
+ return imx_add_uart((void *)IMX_UART4_BASE, 3);
+}
+
+static inline struct device_d *imx21_add_nand(struct imx_nand_platform_data *pdata)
+{
+ return imx_add_nand((void *)0xDF003000, pdata);
+}
+
+static inline struct device_d *imx21_add_fb(struct imx_fb_platform_data *pdata)
+{
+ return imx_add_fb((void *)0x10021000, pdata);
+}
+
diff --git a/arch/arm/mach-imx/include/mach/devices-imx25.h b/arch/arm/mach-imx/include/mach/devices-imx25.h
new file mode 100644
index 0000000..dc7f98f
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx25.h
@@ -0,0 +1,38 @@
+
+#include <mach/devices.h>
+
+static inline struct device_d *imx25_add_i2c0(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)IMX_I2C1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx25_add_uart0(void)
+{
+ return imx_add_uart((void *)IMX_UART1_BASE, 0);
+}
+
+static inline struct device_d *imx25_add_uart1(void)
+{
+ return imx_add_uart((void *)IMX_UART2_BASE, 1);
+}
+
+static inline struct device_d *imx25_add_nand(struct imx_nand_platform_data *pdata)
+{
+ return imx_add_nand((void *)IMX_NFC_BASE, pdata);
+}
+
+static inline struct device_d *imx25_add_fb(struct imx_fb_platform_data *pdata)
+{
+ return imx_add_fb((void *)0x53fbc000, pdata);
+}
+
+static inline struct device_d *imx25_add_fec(struct fec_platform_data *pdata)
+{
+ return imx_add_fec((void *)IMX_FEC_BASE, pdata);
+}
+
+static inline struct device_d *imx25_add_mmc0(void *pdata)
+{
+ return imx_add_mmc((void *)0x53fb4000, 0, pdata);
+}
+
diff --git a/arch/arm/mach-imx/include/mach/devices-imx27.h b/arch/arm/mach-imx/include/mach/devices-imx27.h
new file mode 100644
index 0000000..0511eb5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx27.h
@@ -0,0 +1,54 @@
+
+#include <mach/devices.h>
+
+static inline struct device_d *imx27_add_spi0(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)IMX_SPI1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx27_add_i2c0(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)IMX_I2C1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx27_add_uart0(void)
+{
+ return imx_add_uart((void *)IMX_UART1_BASE, 0);
+}
+
+static inline struct device_d *imx27_add_uart1(void)
+{
+ return imx_add_uart((void *)IMX_UART2_BASE, 1);
+}
+
+static inline struct device_d *imx27_add_uart2(void)
+{
+ return imx_add_uart((void *)IMX_UART3_BASE, 2);
+}
+
+static inline struct device_d *imx27_add_uart3(void)
+{
+ return imx_add_uart((void *)IMX_UART4_BASE, 3);
+}
+
+static inline struct device_d *imx27_add_nand(struct imx_nand_platform_data *pdata)
+{
+ return imx_add_nand((void *)IMX_NFC_BASE, pdata);
+}
+
+static inline struct device_d *imx27_add_fb(struct imx_fb_platform_data *pdata)
+{
+ return imx_add_fb((void *)0x10021000, pdata);
+}
+
+static inline struct device_d *imx27_add_fec(struct fec_platform_data *pdata)
+{
+ return imx_add_fec((void *)IMX_FEC_BASE, pdata);
+}
+
+static inline struct device_d *imx27_add_mmc0(void *pdata)
+{
+ return imx_add_mmc((void *)0x10014000, 0, pdata);
+}
+
+
diff --git a/arch/arm/mach-imx/include/mach/devices-imx31.h b/arch/arm/mach-imx/include/mach/devices-imx31.h
new file mode 100644
index 0000000..1f5a48a
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx31.h
@@ -0,0 +1,35 @@
+
+#include <mach/imx-regs.h>
+#include <mach/devices.h>
+
+#if 0
+static inline struct device_d *imx31_add_spi0(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)IMX_SPI1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx31_add_spi1(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)IMX_SPI2_BASE, 1, pdata);
+}
+#endif
+
+static inline struct device_d *imx31_add_uart0(void)
+{
+ return imx_add_uart((void *)IMX_UART1_BASE, 0);
+}
+
+static inline struct device_d *imx31_add_uart1(void)
+{
+ return imx_add_uart((void *)IMX_UART2_BASE, 1);
+}
+
+static inline struct device_d *imx31_add_nand(struct imx_nand_platform_data *pdata)
+{
+ return imx_add_nand((void *)0xb8000000, pdata);
+}
+
+static inline struct device_d *imx31_add_fb(struct imx_fb_platform_data *pdata)
+{
+ return imx_add_ipufb((void *)IPU_BASE, pdata);
+}
diff --git a/arch/arm/mach-imx/include/mach/devices-imx35.h b/arch/arm/mach-imx/include/mach/devices-imx35.h
new file mode 100644
index 0000000..3b2b1ff
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx35.h
@@ -0,0 +1,57 @@
+
+#include <mach/devices.h>
+
+static inline struct device_d *imx35_add_i2c0(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)IMX_I2C1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx35_add_i2c1(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)IMX_I2C2_BASE, 1, pdata);
+}
+
+static inline struct device_d *imx35_add_i2c2(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)IMX_I2C3_BASE, 2, pdata);
+}
+
+static inline struct device_d *imx35_add_uart0(void)
+{
+ return imx_add_uart((void *)IMX_UART1_BASE, 0);
+}
+
+static inline struct device_d *imx35_add_uart1(void)
+{
+ return imx_add_uart((void *)IMX_UART2_BASE, 1);
+}
+
+static inline struct device_d *imx35_add_nand(struct imx_nand_platform_data *pdata)
+{
+ return imx_add_nand((void *)IMX_NFC_BASE, pdata);
+}
+
+static inline struct device_d *imx35_add_fb(struct imx_ipu_fb_platform_data *pdata)
+{
+ return imx_add_ipufb((void *)IMX_IPU_BASE, pdata);
+}
+
+static inline struct device_d *imx35_add_fec(struct fec_platform_data *pdata)
+{
+ return imx_add_fec((void *)IMX_FEC_BASE, pdata);
+}
+
+static inline struct device_d *imx35_add_mmc0(void *pdata)
+{
+ return imx_add_mmc((void *)IMX_SDHC1_BASE, 0, pdata);
+}
+
+static inline struct device_d *imx35_add_mmc1(void *pdata)
+{
+ return imx_add_mmc((void *)IMX_SDHC2_BASE, 1, pdata);
+}
+
+static inline struct device_d *imx35_add_mmc2(void *pdata)
+{
+ return imx_add_mmc((void *)IMX_SDHC3_BASE, 2, pdata);
+}
diff --git a/arch/arm/mach-imx/include/mach/devices-imx51.h b/arch/arm/mach-imx/include/mach/devices-imx51.h
new file mode 100644
index 0000000..ff63fca
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices-imx51.h
@@ -0,0 +1,53 @@
+
+#include <mach/devices.h>
+
+static inline struct device_d *imx51_add_spi0(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)MX51_CSPI1_BASE_ADDR, 0, pdata);
+}
+
+static inline struct device_d *imx51_add_spi1(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)MX51_CSPI2_BASE_ADDR, 1, pdata);
+}
+
+static inline struct device_d *imx51_add_spi2(struct spi_imx_master *pdata)
+{
+ return imx_add_spi((void *)MX51_CSPI3_BASE_ADDR, 2, pdata);
+}
+
+static inline struct device_d *imx51_add_i2c0(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)MX51_I2C1_BASE_ADDR, 0, pdata);
+}
+
+static inline struct device_d *imx51_add_i2c1(struct i2c_platform_data *pdata)
+{
+ return imx_add_i2c((void *)MX51_I2C2_BASE_ADDR, 1, pdata);
+}
+
+static inline struct device_d *imx51_add_uart0(void)
+{
+ return imx_add_uart((void *)MX51_UART1_BASE_ADDR, 0);
+}
+
+static inline struct device_d *imx51_add_uart1(void)
+{
+ return imx_add_uart((void *)MX51_UART2_BASE_ADDR, 1);
+}
+
+static inline struct device_d *imx51_add_fec(struct fec_platform_data *pdata)
+{
+ return imx_add_fec((void *)MX51_MXC_FEC_BASE_ADDR, pdata);
+}
+
+static inline struct device_d *imx51_add_mmc0(void *pdata)
+{
+ return imx_add_mmc((void *)MX51_MMC_SDHC1_BASE_ADDR, 0, pdata);
+}
+
+static inline struct device_d *imx51_add_mmc1(void *pdata)
+{
+ return imx_add_mmc((void *)MX51_MMC_SDHC2_BASE_ADDR, 0, pdata);
+}
+
diff --git a/arch/arm/mach-imx/include/mach/devices.h b/arch/arm/mach-imx/include/mach/devices.h
new file mode 100644
index 0000000..677d5b5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/devices.h
@@ -0,0 +1,17 @@
+
+#include <fec.h>
+#include <i2c/i2c.h>
+#include <mach/spi.h>
+#include <mach/imx-nand.h>
+#include <mach/imxfb.h>
+#include <mach/imx-ipu-fb.h>
+
+struct device_d *imx_add_fec(void *base, struct fec_platform_data *pdata);
+struct device_d *imx_add_spi(void *base, int id, struct spi_imx_master *pdata);
+struct device_d *imx_add_i2c(void *base, int id, struct i2c_platform_data *pdata);
+struct device_d *imx_add_uart(void *base, int id);
+struct device_d *imx_add_nand(void *base, struct imx_nand_platform_data *pdata);
+struct device_d *imx_add_fb(void *base, struct imx_fb_platform_data *pdata);
+struct device_d *imx_add_ipufb(void *base, struct imx_ipu_fb_platform_data *pdata);
+struct device_d *imx_add_mmc(void *base, int id, void *pdata);
+
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 03/17] ARM i.MX: Add header protection
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
2010-11-02 17:17 ` [PATCH 01/17] ARM i.MX51: Add SPBA0 base addresses Sascha Hauer
2010-11-02 17:17 ` [PATCH 02/17] ARM i.MX: Add device convenience functions Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 04/17] ARM i.MX35: Add IPU base address Sascha Hauer
` (13 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/include/mach/imxfb.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
index 16b43ea..b71b7f4 100644
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
@@ -1,3 +1,6 @@
+#ifndef __MACH_IMXFB_H
+#define __MACH_IMXFB_H
+
/*
* This structure describes the machine which we are running on.
*/
@@ -80,6 +83,8 @@ struct imx_fb_platform_data {
void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* __MACH_IMXFB_H */
+
/**
* @file
* @brief i.MX related framebuffer declarations
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 04/17] ARM i.MX35: Add IPU base address
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (2 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 03/17] ARM i.MX: Add header protection Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 05/17] ARM pcm043: Use device functions Sascha Hauer
` (12 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/include/mach/imx35-regs.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-imx/include/mach/imx35-regs.h b/arch/arm/mach-imx/include/mach/imx35-regs.h
index 89ca7ea..75825e5 100644
--- a/arch/arm/mach-imx/include/mach/imx35-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx35-regs.h
@@ -51,6 +51,7 @@
#define IMX_SDHC1_BASE 0x53FB4000
#define IMX_SDHC2_BASE 0x53FB8000
#define IMX_SDHC3_BASE 0x53FBC000
+#define IMX_IPU_BASE 0x53FC0000
#define IMX_OTG_BASE 0x53FF4000
#define IMX_WDOG_BASE 0x53fdc000
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 05/17] ARM pcm043: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (3 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 04/17] ARM i.MX35: Add IPU base address Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 06/17] ARM pca100: " Sascha Hauer
` (11 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm043/pcm043.c | 38 +++++---------------------------------
1 files changed, 5 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boards/pcm043/pcm043.c b/arch/arm/boards/pcm043/pcm043.c
index 5932f95..2191bc8 100644
--- a/arch/arm/boards/pcm043/pcm043.c
+++ b/arch/arm/boards/pcm043/pcm043.c
@@ -43,6 +43,7 @@
#include <mach/imx-ipu-fb.h>
#include <mach/imx-pll.h>
#include <mach/iomux-mx35.h>
+#include <mach/devices-imx35.h>
/*
* Up to 32MiB NOR type flash, connected to
@@ -59,13 +60,6 @@ static struct fec_platform_data fec_info = {
.xcv_type = MII100,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = IMX_FEC_BASE,
- .platform_data = &fec_info,
-};
-
static struct memory_platform_data ram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
@@ -85,13 +79,6 @@ struct imx_nand_platform_data nand_info = {
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = IMX_NFC_BASE,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_PCM043_DISPLAY_SHARP
static struct fb_videomode pcm043_fb_mode = {
/* 240x320 @ 60 Hz */
@@ -135,14 +122,6 @@ static struct imx_ipu_fb_platform_data ipu_fb_data = {
.bpp = 16,
};
-static struct device_d imx_ipu_fb_dev = {
- .id = -1,
- .name = "imx-ipu-fb",
- .map_base = 0x53fc0000,
- .size = 0x1000,
- .platform_data = &ipu_fb_data,
-};
-
#ifdef CONFIG_MMU
static int pcm043_mmu_init(void)
{
@@ -185,11 +164,11 @@ static int imx35_devices_init(void)
else
nand_info.width = 1; /* 8 bit */
- register_device(&fec_dev);
+ imx35_add_fec(&fec_info);
/*
* This platform supports NOR and NAND
*/
- register_device(&nand_dev);
+ imx35_add_nand(&nand_info);
register_device(&cfi_dev);
if ((reg & 0xc00) == 0x800) { /* reset mode: external boot */
@@ -210,7 +189,7 @@ static int imx35_devices_init(void)
}
register_device(&sdram0_dev);
- register_device(&imx_ipu_fb_dev);
+ imx35_add_fb(&ipu_fb_data);
armlinux_add_dram(&sdram0_dev);
armlinux_set_bootparams((void *)0x80000100);
@@ -221,13 +200,6 @@ static int imx35_devices_init(void)
device_initcall(imx35_devices_init);
-static struct device_d imx35_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 16 * 1024,
-};
-
static struct pad_desc pcm043_pads[] = {
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
@@ -261,7 +233,7 @@ static int imx35_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
- register_device(&imx35_serial_device);
+ imx35_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 06/17] ARM pca100: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (4 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 05/17] ARM pcm043: Use device functions Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 07/17] ARM pcm038: " Sascha Hauer
` (10 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/phycard-i.MX27/pca100.c | 28 +++++-----------------------
1 files changed, 5 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 3a96180..32f7e74 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -1,4 +1,4 @@
- /*
+/*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
@@ -39,6 +39,7 @@
#include <asm/mmu.h>
#include <usb/isp1504.h>
#include <mach/iomux-mx27.h>
+#include <mach/devices-imx27.h>
static struct memory_platform_data ram_pdata = {
.name = "ram0",
@@ -58,26 +59,12 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_USB
static struct device_d usbh2_dev = {
.id = -1,
@@ -110,11 +97,6 @@ static void pca100_usbh_init(void)
}
#endif
-static struct device_d mmc_dev = {
- .name = "imx-mmc",
- .map_base = 0x10014000,
-};
-
#ifdef CONFIG_MMU
static void pca100_mmu_init(void)
{
@@ -207,10 +189,10 @@ static int pca100_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
- register_device(&fec_dev);
- register_device(&mmc_dev);
+ imx27_add_fec(&fec_info);
+ imx27_add_mmc0(NULL);
PCCR1 |= PCCR1_PERCLK2_EN;
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 07/17] ARM pcm038: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (5 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 06/17] ARM pca100: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 08/17] ARM pcm037: " Sascha Hauer
` (9 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm038/pcm038.c | 47 +++++----------------------------------
1 files changed, 6 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 3a9b413..1dbc6b6 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -43,6 +43,7 @@
#include <usb/isp1504.h>
#include <mach/spi.h>
#include <mach/iomux-mx27.h>
+#include <mach/devices-imx27.h>
#include "pll.h"
@@ -84,13 +85,6 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
static struct spi_imx_master pcm038_spi_0_data = {
@@ -98,13 +92,6 @@ static struct spi_imx_master pcm038_spi_0_data = {
.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
};
-static struct device_d spi_dev = {
- .id = -1,
- .name = "imx_spi",
- .map_base = 0x1000e000,
- .platform_data = &pcm038_spi_0_data,
-};
-
static struct spi_board_info pcm038_spi_board_info[] = {
{
.name = "mc13783",
@@ -120,13 +107,6 @@ static struct imx_nand_platform_data nand_info = {
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
static struct imx_fb_videomode imxfb_mode = {
.mode = {
.name = "Sharp-LQ035Q7",
@@ -161,14 +141,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
.dmacr = 0x00020010,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imxfb",
- .map_base = 0x10021000,
- .size = 0x1000,
- .platform_data = &pcm038_fb_data,
-};
-
#ifdef CONFIG_USB
static struct device_d usbh2_dev = {
.id = -1,
@@ -323,13 +295,13 @@ static int pcm038_devices_init(void)
gpio_direction_output(GPIO_PORTD | 28, 0);
gpio_set_value(GPIO_PORTD | 28, 0);
spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info));
- register_device(&spi_dev);
+ imx27_add_spi0(&pcm038_spi_0_data);
register_device(&cfi_dev);
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
register_device(&sram_dev);
- register_device(&imxfb_dev);
+ imx27_add_fb(&pcm038_fb_data);
#ifdef CONFIG_USB
pcm038_usbh_init();
@@ -339,7 +311,7 @@ static int pcm038_devices_init(void)
/* Register the fec device after the PLL re-initialisation
* as the fec depends on the (now higher) ipg clock
*/
- register_device(&fec_dev);
+ imx27_add_fec(&fec_info);
switch ((GPCR & GPCR_BOOT_MASK) >> GPCR_BOOT_SHIFT) {
case GPCR_BOOT_8BIT_NAND_2k:
@@ -372,16 +344,9 @@ static int pcm038_devices_init(void)
device_initcall(pcm038_devices_init);
-static struct device_d pcm038_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static int pcm038_console_init(void)
{
- register_device(&pcm038_serial_device);
+ imx27_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 08/17] ARM pcm037: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (6 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 07/17] ARM pcm038: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 09/17] ARM imx27ads: " Sascha Hauer
` (8 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm037/pcm037.c | 20 +++-----------------
1 files changed, 3 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boards/pcm037/pcm037.c b/arch/arm/boards/pcm037/pcm037.c
index 89e2481..ffecec2 100644
--- a/arch/arm/boards/pcm037/pcm037.c
+++ b/arch/arm/boards/pcm037/pcm037.c
@@ -37,7 +37,7 @@
#include <partition.h>
#include <generated/mach-types.h>
#include <mach/imx-nand.h>
-
+#include <mach/devices-imx31.h>
/*
* Up to 32MiB NOR type flash, connected to
@@ -126,13 +126,6 @@ struct imx_nand_platform_data nand_info = {
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xB8000000,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_USB
static struct device_d usbotg_dev = {
.id = -1,
@@ -295,7 +288,7 @@ static int imx31_devices_init(void)
protect_file("/dev/env0", 1);
register_device(&sram_dev);
- register_device(&nand_dev);
+ imx31_add_nand(&nand_info);
register_device(&network_dev);
register_device(&sdram0_dev);
@@ -320,13 +313,6 @@ static int imx31_devices_init(void)
device_initcall(imx31_devices_init);
-static struct device_d imx31_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 16 * 1024,
-};
-
static int imx31_console_init(void)
{
/* init gpios for serial port */
@@ -335,7 +321,7 @@ static int imx31_console_init(void)
imx_iomux_mode(MX31_PIN_CTS1__CTS1);
imx_iomux_mode(MX31_PIN_RTS1__RTS1);
- register_device(&imx31_serial_device);
+ imx31_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 09/17] ARM imx27ads: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (7 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 08/17] ARM pcm037: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 10/17] ARM imx21ads: " Sascha Hauer
` (7 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/imx27ads/imx27ads.c | 19 +++----------------
1 files changed, 3 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boards/imx27ads/imx27ads.c b/arch/arm/boards/imx27ads/imx27ads.c
index ae5da7f..0d433c1 100644
--- a/arch/arm/boards/imx27ads/imx27ads.c
+++ b/arch/arm/boards/imx27ads/imx27ads.c
@@ -32,6 +32,7 @@
#include <fcntl.h>
#include <generated/mach-types.h>
#include <mach/iomux-mx27.h>
+#include <mach/devices-imx27.h>
static struct device_d cfi_dev = {
.id = -1,
@@ -58,13 +59,6 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
static int imx27ads_timing_init(void)
{
/* configure cpld on cs4 */
@@ -134,7 +128,7 @@ static int mx27ads_devices_init(void)
register_device(&cfi_dev);
register_device(&sdram_dev);
- register_device(&fec_dev);
+ imx27_add_fec(&fec_info);
devfs_add_partition("nor0", 0x00000, 0x20000, PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x20000, 0x20000, PARTITION_FIXED, "env0");
@@ -149,16 +143,9 @@ static int mx27ads_devices_init(void)
device_initcall(mx27ads_devices_init);
-static struct device_d mx27ads_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static int mx27ads_console_init(void)
{
- register_device(&mx27ads_serial_device);
+ imx27_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 10/17] ARM imx21ads: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (8 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 09/17] ARM imx27ads: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 11/17] ARM mx51 babbage: " Sascha Hauer
` (6 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/imx21ads/imx21ads.c | 29 ++++-------------------------
1 files changed, 4 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boards/imx21ads/imx21ads.c b/arch/arm/boards/imx21ads/imx21ads.c
index 44d37aa..3942581 100644
--- a/arch/arm/boards/imx21ads/imx21ads.c
+++ b/arch/arm/boards/imx21ads/imx21ads.c
@@ -36,6 +36,7 @@
#include <mach/imx-nand.h>
#include <mach/imxfb.h>
#include <mach/iomux-mx21.h>
+#include <mach/devices-imx21.h>
#define MX21ADS_IO_REG 0xCC800000
#define MX21ADS_IO_LCDON (1 << 9)
@@ -65,13 +66,6 @@ struct imx_nand_platform_data nand_info = {
.hw_ecc = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xDF003000,
- .platform_data = &nand_info,
-};
-
static struct device_d cs8900_dev = {
.id = -1,
.name = "cs8900",
@@ -111,14 +105,6 @@ static struct imx_fb_platform_data imx_fb_data = {
.dmacr = 0x00020008,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imxfb",
- .map_base = 0x10021000,
- .size = 0x1000,
- .platform_data = &imx_fb_data,
-};
-
static int imx21ads_timing_init(void)
{
u32 temp;
@@ -199,9 +185,9 @@ static int mx21ads_devices_init(void)
register_device(&cfi_dev);
register_device(&sdram_dev);
- register_device(&nand_dev);
+ imx21_add_nand(&nand_info);
register_device(&cs8900_dev);
- register_device(&imxfb_dev);
+ imx21_add_fb(&imx_fb_data);
armlinux_add_dram(&sdram_dev);
armlinux_set_bootparams((void *)0xc0000100);
@@ -224,16 +210,9 @@ static int mx21ads_enable_display(void)
late_initcall(mx21ads_enable_display);
-static struct device_d mx21ads_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static int mx21ads_console_init(void)
{
- register_device(&mx21ads_serial_device);
+ imx21_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 11/17] ARM mx51 babbage: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (9 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 10/17] ARM imx21ads: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 12/17] ARM neso: " Sascha Hauer
` (5 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx51-pdk/board.c | 33 ++++-----------------------
1 files changed, 5 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boards/freescale-mx51-pdk/board.c b/arch/arm/boards/freescale-mx51-pdk/board.c
index 5197c55..ff779ca 100644
--- a/arch/arm/boards/freescale-mx51-pdk/board.c
+++ b/arch/arm/boards/freescale-mx51-pdk/board.c
@@ -39,6 +39,7 @@
#include <mach/spi.h>
#include <mach/generic.h>
#include <mach/iomux-mx51.h>
+#include <mach/devices-imx51.h>
static struct memory_platform_data ram_pdata = {
.name = "ram0",
@@ -57,17 +58,6 @@ static struct fec_platform_data fec_info = {
.xcv_type = MII100,
};
-static struct device_d fec_dev = {
- .name = "fec_imx",
- .map_base = 0x83fec000,
- .platform_data = &fec_info,
-};
-
-static struct device_d esdhc_dev = {
- .name = "imx-esdhc",
- .map_base = 0x70004000,
-};
-
static struct pad_desc f3s_pads[] = {
MX51_PAD_EIM_EB2__FEC_MDIO,
MX51_PAD_EIM_EB3__FEC_RDATA1,
@@ -130,13 +120,6 @@ static struct spi_imx_master spi_0_data = {
.num_chipselect = ARRAY_SIZE(spi_0_cs),
};
-static struct device_d spi_dev = {
- .id = -1,
- .name = "imx_spi",
- .map_base = MX51_CSPI1_BASE_ADDR,
- .platform_data = &spi_0_data,
-};
-
static const struct spi_board_info mx51_babbage_spi_board_info[] = {
{
.name = "mc13892-spi",
@@ -268,12 +251,12 @@ static int f3s_devices_init(void)
babbage_mmu_init();
register_device(&sdram_dev);
- register_device(&fec_dev);
- register_device(&esdhc_dev);
+ imx51_add_fec(&fec_info);
+ imx51_add_mmc0(NULL);
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
- register_device(&spi_dev);
+ imx51_add_spi0(&spi_0_data);
babbage_power_init();
@@ -295,12 +278,6 @@ static int f3s_part_init(void)
}
late_initcall(f3s_part_init);
-static struct device_d f3s_serial_device = {
- .name = "imx_serial",
- .map_base = 0x73fbc000,
- .size = 4096,
-};
-
static int f3s_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(f3s_pads, ARRAY_SIZE(f3s_pads));
@@ -310,7 +287,7 @@ static int f3s_console_init(void)
writel(0, 0x73fa8230);
writel(0, 0x73fa8234);
- register_device(&f3s_serial_device);
+ imx51_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 12/17] ARM neso: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (10 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 11/17] ARM mx51 babbage: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 13/17] ARM mx35 3ds: " Sascha Hauer
` (4 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/guf-neso/board.c | 38 +++++---------------------------------
1 files changed, 5 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
index 9c85c08..d371dd6 100644
--- a/arch/arm/boards/guf-neso/board.c
+++ b/arch/arm/boards/guf-neso/board.c
@@ -44,6 +44,7 @@
#include <mach/imx-nand.h>
#include <mach/imx-pll.h>
#include <mach/imxfb.h>
+#include <mach/devices-imx27.h>
/* two pins are controlling the CS signals to the USB phys */
#define USBH2_PHY_CS_GPIO (GPIO_PORTF + 20)
@@ -71,26 +72,12 @@ static struct fec_platform_data fec_info = {
.phy_addr = 31,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
static struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
static struct imx_fb_videomode imxfb_mode = {
.mode = {
.name = "CPT CLAA070LC0JCT",
@@ -139,14 +126,6 @@ static struct imx_fb_platform_data neso_fb_data = {
.framebuffer_ovl = (void *)0xa7f00000,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imxfb",
- .map_base = 0x10021000,
- .size = 0x1000,
- .platform_data = &neso_fb_data,
-};
-
#ifdef CONFIG_USB
static struct device_d usbh2_dev = {
@@ -334,16 +313,16 @@ static int neso_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
- register_device(&imxfb_dev);
+ imx27_add_fb(&neso_fb_data);
#ifdef CONFIG_USB
neso_usbh_init();
register_device(&usbh2_dev);
#endif
- register_device(&fec_dev);
+ imx27_add_fec(&fec_info);
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
@@ -360,16 +339,9 @@ static int neso_devices_init(void)
device_initcall(neso_devices_init);
-static struct device_d neso_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static int neso_console_init(void)
{
- register_device(&neso_serial_device);
+ imx27_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 13/17] ARM mx35 3ds: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (11 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 12/17] ARM neso: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 14/17] ARM mx25 " Sascha Hauer
` (3 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 38 +++--------------------
1 files changed, 5 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
index d6699cd..127bfb4 100644
--- a/arch/arm/boards/freescale-mx35-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c
@@ -48,6 +48,7 @@
#include <mach/pmic.h>
#include <mach/imx-ipu-fb.h>
#include <mach/generic.h>
+#include <mach/devices-imx35.h>
#include <i2c/i2c.h>
#include <mfd/mc13892.h>
@@ -70,13 +71,6 @@ static struct fec_platform_data fec_info = {
.phy_addr = 0x1F,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = IMX_FEC_BASE,
- .platform_data = &fec_info,
-};
-
static struct memory_platform_data sdram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
@@ -95,13 +89,6 @@ struct imx_nand_platform_data nand_info = {
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = IMX_NFC_BASE,
- .platform_data = &nand_info,
-};
-
static struct device_d smc911x_dev = {
.id = -1,
.name = "smc911x",
@@ -149,14 +136,6 @@ static struct imx_ipu_fb_platform_data ipu_fb_data = {
.bpp = 16,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imx-ipu-fb",
- .map_base = 0x53fc0000,
- .size = 0x1000,
- .platform_data = &ipu_fb_data,
-};
-
/*
* Revision to be passed to kernel. The kernel provided
* by freescale relies on this.
@@ -202,7 +181,7 @@ static int f3s_devices_init(void)
/*
* This platform supports NOR and NAND
*/
- register_device(&nand_dev);
+ imx35_add_nand(&nand_info);
register_device(&cfi_dev);
switch ((reg >> 25) & 0x3) {
@@ -225,11 +204,11 @@ static int f3s_devices_init(void)
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
register_device(&i2c_dev);
- register_device(&fec_dev);
+ imx35_add_fec(&fec_info);
register_device(&smc911x_dev);
register_device(&sdram_dev);
- register_device(&imxfb_dev);
+ imx35_add_fb(&ipu_fb_data);
armlinux_add_dram(&sdram_dev);
armlinux_set_bootparams((void *)0x80000100);
@@ -250,13 +229,6 @@ static int f3s_enable_display(void)
late_initcall(f3s_enable_display);
-static struct device_d f3s_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static struct pad_desc f3s_pads[] = {
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
@@ -322,7 +294,7 @@ static int f3s_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(f3s_pads, ARRAY_SIZE(f3s_pads));
- register_device(&f3s_serial_device);
+ imx35_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 14/17] ARM mx25 3ds: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (12 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 13/17] ARM mx35 3ds: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 15/17] ARM eukrea cpuimx35: " Sascha Hauer
` (2 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 36 +++-------------------
1 files changed, 5 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boards/freescale-mx25-3-stack/3stack.c b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
index 25945f1..49b7f5c 100644
--- a/arch/arm/boards/freescale-mx25-3-stack/3stack.c
+++ b/arch/arm/boards/freescale-mx25-3-stack/3stack.c
@@ -40,6 +40,7 @@
#include <linux/err.h>
#include <i2c/i2c.h>
#include <mfd/mc34704.h>
+#include <mach/devices-imx25.h>
extern unsigned long _stext;
extern void exception_vectors(void);
@@ -112,13 +113,6 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = IMX_FEC_BASE,
- .platform_data = &fec_info,
-};
-
static struct memory_platform_data sdram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
@@ -156,13 +150,6 @@ struct imx_nand_platform_data nand_info = {
.hw_ecc = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = IMX_NFC_BASE,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_USB
static void imx25_usb_init(void)
{
@@ -197,12 +184,6 @@ static struct i2c_board_info i2c_devices[] = {
},
};
-static struct device_d i2c_dev = {
- .id = -1,
- .name = "i2c-imx",
- .map_base = IMX_I2C1_BASE,
-};
-
static int imx25_3ds_pmic_init(void)
{
struct mc34704 *pmic;
@@ -259,12 +240,12 @@ static int imx25_devices_init(void)
register_device(&usbh2_dev);
#endif
- register_device(&fec_dev);
+ imx25_add_fec(&fec_info);
if (readl(IMX_CCM_BASE + CCM_RCSR) & (1 << 14))
nand_info.width = 2;
- register_device(&nand_dev);
+ imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
@@ -276,7 +257,7 @@ static int imx25_devices_init(void)
register_device(&sram0_dev);
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- register_device(&i2c_dev);
+ imx25_add_i2c0(NULL);
armlinux_add_dram(&sdram0_dev);
armlinux_set_bootparams((void *)0x80000100);
@@ -288,13 +269,6 @@ static int imx25_devices_init(void)
device_initcall(imx25_devices_init);
-static struct device_d imx25_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 16 * 1024,
-};
-
static struct pad_desc imx25_pads[] = {
MX25_PAD_FEC_MDC__MDC,
MX25_PAD_FEC_MDIO__MDIO,
@@ -339,7 +313,7 @@ static int imx25_console_init(void)
writel(0x03010101, 0x53f80024);
- register_device(&imx25_serial_device);
+ imx25_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 15/17] ARM eukrea cpuimx35: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (13 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 14/17] ARM mx25 " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 16/17] ARM eukrea cpuimx27: " Sascha Hauer
2010-11-02 17:17 ` [PATCH 17/17] ARM eukrea cpuimx25: " Sascha Hauer
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 53 +++------------------
1 files changed, 7 insertions(+), 46 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index dfe64d0..07f320b 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -54,19 +54,13 @@
#include <i2c/i2c.h>
#include <usb/fsl_usb2.h>
#include <mach/usb.h>
+#include <mach/devices-imx35.h>
static struct fec_platform_data fec_info = {
.xcv_type = MII100,
.phy_addr = 0x1F,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = IMX_FEC_BASE,
- .platform_data = &fec_info,
-};
-
static struct memory_platform_data sdram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
@@ -86,13 +80,6 @@ struct imx_nand_platform_data nand_info = {
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = IMX_NFC_BASE,
- .platform_data = &nand_info,
-};
-
static struct fb_videomode imxfb_mode = {
.name = "CMO_QVGA",
.refresh = 60,
@@ -121,25 +108,6 @@ static struct imx_ipu_fb_platform_data ipu_fb_data = {
.enable = eukrea_cpuimx35_enable_display,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imx-ipu-fb",
- .map_base = 0x53fc0000,
- .size = 0x1000,
- .platform_data = &ipu_fb_data,
-};
-
-static struct device_d i2c_dev = {
- .id = -1,
- .name = "i2c-imx",
- .map_base = IMX_I2C1_BASE,
-};
-
-static struct device_d esdhc_dev = {
- .name = "imx-esdhc",
- .map_base = IMX_SDHC1_BASE,
-};
-
#ifdef CONFIG_USB
static void imx35_usb_init(void)
{
@@ -212,20 +180,20 @@ static int eukrea_cpuimx35_devices_init(void)
{
unsigned int tmp;
- register_device(&nand_dev);
+ imx35_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
- register_device(&fec_dev);
+ imx35_add_fec(&fec_info);
register_device(&sdram_dev);
- register_device(&imxfb_dev);
+ imx35_add_fb(&ipu_fb_data);
- register_device(&i2c_dev);
- register_device(&esdhc_dev);
+ imx35_add_i2c0(NULL);
+ imx35_add_mmc0(NULL);
#ifdef CONFIG_USB
imx35_usb_init();
@@ -245,13 +213,6 @@ static int eukrea_cpuimx35_devices_init(void)
device_initcall(eukrea_cpuimx35_devices_init);
-static struct device_d eukrea_cpuimx35_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static struct pad_desc eukrea_cpuimx35_pads[] = {
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
@@ -306,7 +267,7 @@ static int eukrea_cpuimx35_console_init(void)
/* led default off */
gpio_direction_output(32 * 2 + 29, 1);
- register_device(&eukrea_cpuimx35_serial_device);
+ imx35_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 16/17] ARM eukrea cpuimx27: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (14 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 15/17] ARM eukrea cpuimx35: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
2010-11-02 17:17 ` [PATCH 17/17] ARM eukrea cpuimx25: " Sascha Hauer
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 27 +++-----------------
1 files changed, 4 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
index 62fc14e..4567cba 100644
--- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
+++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
@@ -46,6 +46,7 @@
#include <i2c/i2c.h>
#include <mfd/lp3972.h>
#include <mach/iomux-mx27.h>
+#include <mach/devices-imx27.h>
static struct device_d cfi_dev = {
.id = -1,
@@ -86,26 +87,12 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_DRIVER_SERIAL_NS16550
unsigned int quad_uart_read(unsigned long base, unsigned char reg_idx)
{
@@ -156,12 +143,6 @@ static struct i2c_board_info i2c_devices[] = {
},
};
-static struct device_d i2c_dev = {
- .id = -1,
- .name = "i2c-imx",
- .map_base = IMX_I2C1_BASE,
-};
-
#ifdef CONFIG_MMU
static void eukrea_cpuimx27_mmu_init(void)
{
@@ -294,12 +275,12 @@ static int eukrea_cpuimx27_devices_init(void)
#ifdef CONFIG_EUKREA_CPUIMX27_NOR_64MB
register_device(&cfi_dev1);
#endif
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
PCCR0 |= PCCR0_I2C1_EN;
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- register_device(&i2c_dev);
+ imx27_add_i2c0(NULL);
devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
@@ -359,7 +340,7 @@ static int eukrea_cpuimx27_late_init(void)
u8 reg[1];
#endif
console_flush();
- register_device(&fec_dev);
+ imx27_add_fec(&fec_info);
#ifdef CONFIG_I2C_LP3972
client = lp3972_get_client();
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread* [PATCH 17/17] ARM eukrea cpuimx25: Use device functions
2010-11-02 17:17 device register functions for i.MX Sascha Hauer
` (15 preceding siblings ...)
2010-11-02 17:17 ` [PATCH 16/17] ARM eukrea cpuimx27: " Sascha Hauer
@ 2010-11-02 17:17 ` Sascha Hauer
16 siblings, 0 replies; 18+ messages in thread
From: Sascha Hauer @ 2010-11-02 17:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 54 +++------------------
1 files changed, 7 insertions(+), 47 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
index 805ffe2..3048c3f 100644
--- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
+++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
@@ -43,6 +43,7 @@
#include <i2c/i2c.h>
#include <usb/fsl_usb2.h>
#include <mach/usb.h>
+#include <mach/devices-imx25.h>
extern unsigned long _stext;
extern void exception_vectors(void);
@@ -88,13 +89,6 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = IMX_FEC_BASE,
- .platform_data = &fec_info,
-};
-
static struct memory_platform_data sdram_pdata = {
.name = "ram0",
.flags = DEVFS_RDWR,
@@ -113,13 +107,6 @@ struct imx_nand_platform_data nand_info = {
.hw_ecc = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = IMX_NFC_BASE,
- .platform_data = &nand_info,
-};
-
static struct imx_fb_videomode imxfb_mode = {
.mode = {
.name = "CMO-QVGA",
@@ -145,26 +132,6 @@ static struct imx_fb_platform_data eukrea_cpuimx25_fb_data = {
.dmacr = 0x80040060,
};
-
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imxfb",
- .map_base = 0x53fbc000,
- .size = 0x1000,
- .platform_data = &eukrea_cpuimx25_fb_data,
-};
-
-static struct device_d i2c_dev = {
- .id = -1,
- .name = "i2c-imx",
- .map_base = IMX_I2C1_BASE,
-};
-
-static struct device_d esdhc_dev = {
- .name = "imx-esdhc",
- .map_base = 0x53fb4000,
-};
-
#ifdef CONFIG_USB
static void imx25_usb_init(void)
{
@@ -285,10 +252,10 @@ static int eukrea_cpuimx25_devices_init(void)
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads));
- register_device(&fec_dev);
+ imx25_add_fec(&fec_info);
nand_info.width = 1;
- register_device(&nand_dev);
+ imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000,
PARTITION_FIXED, "self_raw");
@@ -304,10 +271,10 @@ static int eukrea_cpuimx25_devices_init(void)
gpio_direction_output(26, 1);
gpio_set_value(26, 1);
- register_device(&imxfb_dev);
+ imx25_add_fb(&eukrea_cpuimx25_fb_data);
- register_device(&i2c_dev);
- register_device(&esdhc_dev);
+ imx25_add_i2c0(NULL);
+ imx25_add_mmc0(NULL);
#ifdef CONFIG_USB
imx25_usb_init();
@@ -324,16 +291,9 @@ static int eukrea_cpuimx25_devices_init(void)
device_initcall(eukrea_cpuimx25_devices_init);
-static struct device_d eukrea_cpuimx25_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 16 * 1024,
-};
-
static int eukrea_cpuimx25_console_init(void)
{
- register_device(&eukrea_cpuimx25_serial_device);
+ imx25_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 18+ messages in thread