mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/6] at91: Introduction of at91sam9261 SOC.
@ 2010-11-10 11:44 Jean-Christophe PLAGNIOL-VILLARD
  2010-11-10 11:44 ` [PATCH 2/6] at91: add Ronetix pm9261 board support Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 1 reply; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-11-10 11:44 UTC (permalink / raw)
  To: barebox; +Cc: Patrice Vilchez, Nicolas Ferre

AT91sam9261 series is an ARM 926ej-s SOC family clocked at 190/100MHz.

The first board that embeds at91sam9261 chip is the AT91SAM9261-EK.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
---
 arch/arm/Makefile                                  |    1 +
 arch/arm/boards/at91sam9261ek/Makefile             |    1 +
 arch/arm/boards/at91sam9261ek/config.h             |    6 +
 arch/arm/boards/at91sam9261ek/env/config           |   41 ++++
 arch/arm/boards/at91sam9261ek/init.c               |  171 +++++++++++++++
 arch/arm/configs/at91sam9261ek_defconfig           |   49 ++++
 arch/arm/mach-at91/Kconfig                         |   24 ++
 arch/arm/mach-at91/Makefile                        |    1 +
 arch/arm/mach-at91/at91sam9261.c                   |  230 ++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c           |  175 +++++++++++++++
 arch/arm/mach-at91/include/mach/at91sam9261.h      |  109 +++++++++
 .../mach-at91/include/mach/at91sam9261_matrix.h    |   64 ++++++
 12 files changed, 872 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9261ek/Makefile
 create mode 100644 arch/arm/boards/at91sam9261ek/config.h
 create mode 100644 arch/arm/boards/at91sam9261ek/env/config
 create mode 100644 arch/arm/boards/at91sam9261ek/init.c
 create mode 100644 arch/arm/configs/at91sam9261ek_defconfig
 create mode 100644 arch/arm/mach-at91/at91sam9261.c
 create mode 100644 arch/arm/mach-at91/at91sam9261_devices.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9261.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9261_matrix.h

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index cdb0185..a2ef430 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ machine-$(CONFIG_ARCH_S3C24xx)		:= s3c24xx
 board-$(CONFIG_MACH_A9M2410)			:= a9m2410
 board-$(CONFIG_MACH_A9M2440)			:= a9m2440
 board-$(CONFIG_MACH_AT91SAM9260EK)		:= at91sam9260ek
+board-$(CONFIG_MACH_AT91SAM9261EK)		:= at91sam9261ek
 board-$(CONFIG_MACH_AT91SAM9263EK)		:= at91sam9263ek
 board-$(CONFIG_MACH_AT91SAM9G20EK)		:= at91sam9260ek
 board-$(CONFIG_MACH_EDB9301)			:= edb93xx
diff --git a/arch/arm/boards/at91sam9261ek/Makefile b/arch/arm/boards/at91sam9261ek/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/at91sam9261ek/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/at91sam9261ek/config.h b/arch/arm/boards/at91sam9261ek/config.h
new file mode 100644
index 0000000..006820c
--- /dev/null
+++ b/arch/arm/boards/at91sam9261ek/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/at91sam9261ek/env/config b/arch/arm/boards/at91sam9261ek/env/config
new file mode 100644
index 0000000..3b92233
--- /dev/null
+++ b/arch/arm/boards/at91sam9261ek/env/config
@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'net' or 'nand'
+kernel_loc=net
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
+
diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
new file mode 100644
index 0000000..e7242ad
--- /dev/null
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <linux/mtd/nand.h>
+#include <mach/at91_pmc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <dm9000.h>
+
+static struct atmel_nand_data nand_pdata = {
+	.ale		= 22,
+	.cle		= 21,
+/*	.det_pin	= ... not connected */
+	.rdy_pin	= AT91_PIN_PC15,
+	.enable_pin	= AT91_PIN_PC14,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (nand_pdata.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&nand_pdata);
+}
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DRIVER_NET_DM9000)
+static struct dm9000_platform_data dm9000_data = {
+	.iobase		= AT91_CHIPSELECT_2,
+	.iodata		= AT91_CHIPSELECT_2 + 4,
+	.buswidth	= DM9000_WIDTH_16,
+	.srom		= 0,
+};
+
+static struct device_d dm9000_dev = {
+	.id		= 0,
+	.name		= "dm9000",
+	.map_base	= AT91_CHIPSELECT_2,
+	.size		= 8,
+	.platform_data	= &dm9000_data,
+};
+
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 8,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 16,
+	.write_cycle		= 16,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+	.tdf_cycles		= 1,
+};
+
+static void __init ek_add_device_dm9000(void)
+{
+	/* Configure chip-select 2 (DM9000) */
+	sam9_smc_configure(2, &dm9000_smc_config);
+
+	/* Configure Reset signal as output */
+	at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(AT91_PIN_PC11, 0);
+
+	register_device(&dm9000_dev);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DRIVER_NET_DM9000 */
+
+static int at91sam9261ek_devices_init(void)
+{
+
+	at91_add_device_sdram(64 * 1024 * 1024);
+	ek_add_device_nand();
+	ek_add_device_dm9000();
+
+	devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
+	dev_add_bb_dev("self_raw", "self0");
+	devfs_add_partition("nand0", 0x40000, 0x40000, PARTITION_FIXED, "env_raw");
+	dev_add_bb_dev("env_raw", "env0");
+
+	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+	armlinux_set_architecture(MACH_TYPE_AT91SAM9261EK);
+
+	return 0;
+}
+
+device_initcall(at91sam9261ek_devices_init);
+
+static int at91sam9261ek_console_init(void)
+{
+	at91_register_uart(0, 0);
+	return 0;
+}
+
+console_initcall(at91sam9261ek_console_init);
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
new file mode 100644
index 0000000..c753eb3
--- /dev/null
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARCH_AT91SAM9261=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="9261-EK:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/at91sam9261ek/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNLZO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_DM9000=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1491161..b3932f3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -6,6 +6,7 @@ config ARCH_TEXT_BASE
 
 config BOARDINFO
 	default "Atmel 91SAM9260-EK" if MACH_AT91SAM9260EK
+	default "Atmel at91sam9261-ek" if MACH_AT91SAM9261EK
 	default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
 	default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
 	default "Bucyrus MMC-CPU" if MACH_MMCCPU
@@ -24,6 +25,10 @@ config ARCH_AT91SAM9260
 	select CPU_ARM926T
 	select HAS_MACB
 
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select CPU_ARM926T
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -56,6 +61,25 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9261
+
+choice
+	prompt "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAS_DM9000
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endchoice
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9G20
 
 choice
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 1bedadb..3025201 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -4,5 +4,6 @@ obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
new file mode 100644
index 0000000..3d503aa
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -0,0 +1,230 @@
+#include <common.h>
+#include <gpio.h>
+#include <init.h>
+#include <asm/hardware.h>
+#include <mach/at91_pmc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+	.name		= "ssc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&ssc2_clk,
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&ohci_clk,
+	&lcdc_clk,
+	// irq0 .. irq2
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+	.name		= "hck0",
+	.pmc_mask	= AT91_PMC_HCK0,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 0,
+};
+static struct clk hck1 = {
+	.name		= "hck1",
+	.pmc_mask	= AT91_PMC_HCK1,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 1,
+};
+
+static void at91sam9261_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+
+	clk_register(&hck0);
+	clk_register(&hck1);
+}
+
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9261_gpio[] = {
+	{
+		.id		= AT91SAM9261_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9261_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+
+static int at91sam9261_initialize(void)
+{
+	/* Init clock subsystem */
+	at91_clock_init(AT91_MAIN_CLOCK);
+
+	/* Register the processor-specific clocks */
+	at91sam9261_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9261_gpio, 3);
+	return 0;
+}
+
+core_initcall(at91sam9261_initialize);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
new file mode 100644
index 0000000..45bfb23
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/mach-at91/at91sam9261_devices.c
+ *
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <common.h>
+#include <asm/armlinux.h>
+#include <asm/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+
+#include "generic.h"
+
+static struct memory_platform_data ram_pdata = {
+	.name = "ram0",
+	.flags = DEVFS_RDWR,
+};
+
+static struct device_d sdram_dev = {
+	.id		= 0,
+	.name		= "mem",
+	.map_base	= AT91_CHIPSELECT_1,
+	.platform_data	= &ram_pdata,
+};
+
+void at91_add_device_sdram(u32 size)
+{
+	sdram_dev.size = size;
+	register_device(&sdram_dev);
+	armlinux_add_dram(&sdram_dev);
+}
+
+#if defined(CONFIG_NAND_ATMEL)
+static struct device_d nand_dev = {
+	.id		= 0,
+	.name		= "atmel_nand",
+	.map_base	= AT91_CHIPSELECT_3,
+	.size		= 0x10,
+};
+
+void at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
+
+	nand_dev.platform_data = data;
+	register_device(&nand_dev);
+}
+#else
+void at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+static struct device_d dbgu_serial_device = {
+	.id		= 0,
+	.name		= "atmel_serial",
+	.map_base	= (AT91_BASE_SYS + AT91_DBGU),
+	.size		= 4096,
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
+}
+
+static struct device_d uart0_serial_device = {
+	.id		= 1,
+	.name		= "atmel_serial",
+	.map_base	= AT91SAM9261_BASE_US0,
+	.size		= 4096,
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PC10, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PC11, 0);	/* CTS0 */
+}
+
+static struct device_d uart1_serial_device = {
+	.id		= 2,
+	.name		= "atmel_serial",
+	.map_base	= AT91SAM9261_BASE_US1,
+	.size		= 4096,
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA12, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA13, 0);	/* CTS1 */
+}
+
+static struct device_d uart2_serial_device = {
+	.id		= 3,
+	.name		= "atmel_serial",
+	.map_base	= AT91SAM9261_BASE_US2,
+	.size		= 4096,
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
+	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA15, 0);	/* RTS2*/
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA16, 0);	/* CTS2 */
+}
+
+void at91_register_uart(unsigned id, unsigned pins)
+{
+	switch (id) {
+		case 0:		/* DBGU */
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &dbgu_serial_device, "usart");
+			register_device(&dbgu_serial_device);
+			break;
+		case AT91SAM9261_ID_US0:
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
+			register_device(&uart0_serial_device);
+			break;
+		case AT91SAM9261_ID_US1:
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
+			register_device(&uart1_serial_device);
+			break;
+		case AT91SAM9261_ID_US2:
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
+			register_device(&uart2_serial_device);
+			break;
+		default:
+			return;
+	}
+}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 0000000..b303e07
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,109 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h]
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9261_BASE_US0
+#define AT91_USART1	AT91SAM9261_BASE_US1
+#define AT91_USART2	AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+/*
+ * Cpu Name
+ */
+#define AT91_CPU_NAME	"AT91SAM9261"
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 0000000..7de0157
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,64 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h]
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/6] at91: add Ronetix pm9261 board support
  2010-11-10 11:44 [PATCH 1/6] at91: Introduction of at91sam9261 SOC Jean-Christophe PLAGNIOL-VILLARD
@ 2010-11-10 11:44 ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-11-10 11:44 UTC (permalink / raw)
  To: barebox; +Cc: Ilko Iliev

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Ilko Iliev <iliev@ronetix.at>
---
 arch/arm/Makefile                 |    1 +
 arch/arm/boards/pm9261/Makefile   |    1 +
 arch/arm/boards/pm9261/config.h   |  110 ++++++++++++++++++++++++
 arch/arm/boards/pm9261/env/config |   41 +++++++++
 arch/arm/boards/pm9261/init.c     |  168 +++++++++++++++++++++++++++++++++++++
 arch/arm/configs/pm9261_defconfig |   52 +++++++++++
 arch/arm/mach-at91/Kconfig        |    8 ++
 7 files changed, 381 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/pm9261/Makefile
 create mode 100644 arch/arm/boards/pm9261/config.h
 create mode 100644 arch/arm/boards/pm9261/env/config
 create mode 100644 arch/arm/boards/pm9261/init.c
 create mode 100644 arch/arm/configs/pm9261_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2ef430..80c5561 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -79,6 +79,7 @@ board-$(CONFIG_MACH_PCA100)			:= phycard-i.MX27
 board-$(CONFIG_MACH_PCM037)			:= pcm037
 board-$(CONFIG_MACH_PCM038)			:= pcm038
 board-$(CONFIG_MACH_PCM043)			:= pcm043
+board-$(CONFIG_MACH_PM9261)			:= pm9261
 board-$(CONFIG_MACH_PM9263)			:= pm9263
 board-$(CONFIG_MACH_SCB9328)			:= scb9328
 board-$(CONFIG_MACH_NESO)			:= guf-neso
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/pm9261/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
new file mode 100644
index 0000000..1c57448
--- /dev/null
+++ b/arch/arm/boards/pm9261/config.h
@@ -0,0 +1,110 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000	/* 16.367 MHz crystal */
+
+#define MASTER_PLL_DIV		15
+#define MASTER_PLL_MUL		162
+#define MAIN_PLL_DIV		2
+
+/* clocks */
+#define CONFIG_SYS_MOR_VAL						\
+		(AT91_PMC_MOSCEN |					\
+		 (255 << 8))		/* Main Oscillator Start-up Time */
+#define CONFIG_SYS_PLLAR_VAL						\
+		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
+		 AT91_PMC_OUT |						\
+		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR1_VAL		\
+		(AT91_PMC_CSS_SLOW |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR2_VAL		\
+		(AT91_PMC_CSS_PLLA |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000
+
+/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
+#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
+       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1		AT91_SDRAMC_MODE_NORMAL
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
+/* SDRAMC_CR - Configuration register*/
+#define CONFIG_SYS_SDRC_CR_VAL							\
+		(AT91_SDRAMC_NC_9 |						\
+		 AT91_SDRAMC_NR_13 |						\
+		 AT91_SDRAMC_NB_4 |						\
+		 AT91_SDRAMC_CAS_3 |						\
+		 AT91_SDRAMC_DBW_32 |						\
+		 (1 <<  8) |		/* Write Recovery Delay */		\
+		 (7 << 12) |		/* Row Cycle Delay */			\
+		 (3 << 16) |		/* Row Precharge Delay */		\
+		 (2 << 20) |		/* Row to Column Delay */		\
+		 (5 << 24) |		/* Active to Precharge Delay */		\
+		 (1 << 28))		/* Exit Self Refresh to Active Delay */
+
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL					\
+		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
+		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL					\
+		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
+		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
+		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL				\
+		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
+		 AT91_SMC_DBW_16 |				\
+		 AT91_SMC_TDFMODE |				\
+		 AT91_SMC_TDF_(6))
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL			\
+		(AT91_RSTC_KEY |		\
+		AT91_RSTC_PROCRST |		\
+		AT91_RSTC_RSTTYP_WAKEUP |	\
+		AT91_RSTC_RSTTYP_WATCHDOG)
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL				\
+		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
+		 AT91_WDT_WDV |					\
+		 AT91_WDT_WDDIS |				\
+		 AT91_WDT_WDD)
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/pm9261/env/config b/arch/arm/boards/pm9261/env/config
new file mode 100644
index 0000000..f7e133e
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/config
@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'net' or 'nand'
+kernel_loc=net
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nor=3
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
+
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
new file mode 100644
index 0000000..6fb14f7
--- /dev/null
+++ b/arch/arm/boards/pm9261/init.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <linux/mtd/nand.h>
+#include <mach/at91_pmc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <dm9000.h>
+
+static struct atmel_nand_data nand_pdata = {
+	.ale		= 22,
+	.cle		= 21,
+/*	.det_pin	= ... not connected */
+	.rdy_pin	= AT91_PIN_PA16,
+	.enable_pin	= AT91_PIN_PC14,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config pm_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void pm_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (nand_pdata.bus_width_16)
+		pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &pm_nand_smc_config);
+
+	at91_add_device_nand(&nand_pdata);
+}
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DRIVER_NET_DM9000)
+static struct dm9000_platform_data dm9000_data = {
+	.iobase		= AT91_CHIPSELECT_2,
+	.iodata		= AT91_CHIPSELECT_2 + 4,
+	.buswidth	= DM9000_WIDTH_16,
+	.srom		= 1,
+};
+
+static struct device_d dm9000_dev = {
+	.id		= 0,
+	.name		= "dm9000",
+	.map_base	= AT91_CHIPSELECT_2,
+	.size		= 8,
+	.platform_data	= &dm9000_data,
+};
+
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 8,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 16,
+	.write_cycle		= 16,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+	.tdf_cycles		= 1,
+};
+
+static void __init pm_add_device_dm9000(void)
+{
+	/* Configure chip-select 2 (DM9000) */
+	sam9_smc_configure(2, &dm9000_smc_config);
+
+	register_device(&dm9000_dev);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DRIVER_NET_DM9000 */
+
+static struct device_d cfi_dev = {
+	.id		= 0,
+	.name		= "cfi_flash",
+	.map_base	= AT91_CHIPSELECT_0,
+	.size		= 4 * 1024 * 1024,
+};
+
+static int pm9261_devices_init(void)
+{
+	at91_add_device_sdram(64 * 1024 * 1024);
+	pm_add_device_nand();
+	register_device(&cfi_dev);
+	pm_add_device_dm9000();
+
+	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
+	devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
+
+	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+	armlinux_set_architecture(MACH_TYPE_PM9261);
+
+	return 0;
+}
+device_initcall(pm9261_devices_init);
+
+static int pm9261_console_init(void)
+{
+	at91_register_uart(0, 0);
+	return 0;
+}
+console_initcall(pm9261_console_init);
diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
new file mode 100644
index 0000000..0bd9483
--- /dev/null
+++ b/arch/arm/configs/pm9261_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARCH_AT91SAM9261=y
+CONFIG_MACH_PM9261=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="PM9261:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9261/env/"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNLZO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_DM9000=y
+# CONFIG_SPI is not set
+CONFIG_DRIVER_CFI=y
+CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b3932f3..f0a81f4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -10,6 +10,7 @@ config BOARDINFO
 	default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
 	default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
 	default "Bucyrus MMC-CPU" if MACH_MMCCPU
+	default "Ronetix PM9261" if MACH_PM9261
 	default "Ronetix PM9263" if MACH_PM9263
 
 config HAVE_NAND_ATMEL_BUSWIDTH_16
@@ -74,6 +75,13 @@ config MACH_AT91SAM9261EK
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 
+config MACH_PM9261
+	bool "Ronetix PM9261"
+	select HAS_DM9000
+	select MACH_HAS_LOWLEVEL_INIT
+	help
+	  Say y here if you are using the Ronetix PM9261 Board
+
 endchoice
 
 endif
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 2/6] at91: add Ronetix pm9261 board support
  2010-11-10 15:02   ` Sascha Hauer
@ 2010-11-11  5:24     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-11-11  5:24 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox, Ilko Iliev

> > +
> > +#define AT91_MAIN_CLOCK		18432000	/* 16.367 MHz crystal */
> 
> Better no comment than a wrong one.
yeah forget to udpate the comment

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 2/6] at91: add Ronetix pm9261 board support
  2010-11-10 11:44 ` [PATCH 2/6] at91: add Ronetix pm9261 board support Jean-Christophe PLAGNIOL-VILLARD
@ 2010-11-10 15:02   ` Sascha Hauer
  2010-11-11  5:24     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 1 reply; 5+ messages in thread
From: Sascha Hauer @ 2010-11-10 15:02 UTC (permalink / raw)
  To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox, Ilko Iliev

On Wed, Nov 10, 2010 at 12:44:56PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: Ilko Iliev <iliev@ronetix.at>
> ---
>  arch/arm/Makefile                 |    1 +
>  arch/arm/boards/pm9261/Makefile   |    1 +
>  arch/arm/boards/pm9261/config.h   |  110 ++++++++++++++++++++++++
>  arch/arm/boards/pm9261/env/config |   41 +++++++++
>  arch/arm/boards/pm9261/init.c     |  168 +++++++++++++++++++++++++++++++++++++
>  arch/arm/configs/pm9261_defconfig |   52 +++++++++++
>  arch/arm/mach-at91/Kconfig        |    8 ++
>  7 files changed, 381 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boards/pm9261/Makefile
>  create mode 100644 arch/arm/boards/pm9261/config.h
>  create mode 100644 arch/arm/boards/pm9261/env/config
>  create mode 100644 arch/arm/boards/pm9261/init.c
>  create mode 100644 arch/arm/configs/pm9261_defconfig
> 
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index a2ef430..80c5561 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -79,6 +79,7 @@ board-$(CONFIG_MACH_PCA100)			:= phycard-i.MX27
>  board-$(CONFIG_MACH_PCM037)			:= pcm037
>  board-$(CONFIG_MACH_PCM038)			:= pcm038
>  board-$(CONFIG_MACH_PCM043)			:= pcm043
> +board-$(CONFIG_MACH_PM9261)			:= pm9261
>  board-$(CONFIG_MACH_PM9263)			:= pm9263
>  board-$(CONFIG_MACH_SCB9328)			:= scb9328
>  board-$(CONFIG_MACH_NESO)			:= guf-neso
> diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
> new file mode 100644
> index 0000000..eb072c0
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/Makefile
> @@ -0,0 +1 @@
> +obj-y += init.o
> diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
> new file mode 100644
> index 0000000..1c57448
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/config.h
> @@ -0,0 +1,110 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define AT91_MAIN_CLOCK		18432000	/* 16.367 MHz crystal */

Better no comment than a wrong one.

> +
> +#define MASTER_PLL_DIV		15
> +#define MASTER_PLL_MUL		162
> +#define MAIN_PLL_DIV		2
> +
> +/* clocks */
> +#define CONFIG_SYS_MOR_VAL						\
> +		(AT91_PMC_MOSCEN |					\
> +		 (255 << 8))		/* Main Oscillator Start-up Time */
> +#define CONFIG_SYS_PLLAR_VAL						\
> +		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
> +		 AT91_PMC_OUT |						\
> +		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
> +
> +/* PCK/2 = MCK Master Clock from PLLA */
> +#define	CONFIG_SYS_MCKR1_VAL		\
> +		(AT91_PMC_CSS_SLOW |	\
> +		 AT91_PMC_PRES_1 |	\
> +		 AT91SAM9_PMC_MDIV_2 |	\
> +		 AT91_PMC_PDIV_1)
> +
> +/* PCK/2 = MCK Master Clock from PLLA */
> +#define	CONFIG_SYS_MCKR2_VAL		\
> +		(AT91_PMC_CSS_PLLA |	\
> +		 AT91_PMC_PRES_1 |	\
> +		 AT91SAM9_PMC_MDIV_2 |	\
> +		 AT91_PMC_PDIV_1)
> +
> +/* define PDC[31:16] as DATA[31:16] */
> +#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
> +/* no pull-up for D[31:16] */
> +#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000
> +
> +/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
> +#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
> +       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
> +
> +/* SDRAM */
> +/* SDRAMC_MR Mode register */
> +#define CONFIG_SYS_SDRC_MR_VAL1		AT91_SDRAMC_MODE_NORMAL
> +/* SDRAMC_TR - Refresh Timer register */
> +#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
> +/* SDRAMC_CR - Configuration register*/
> +#define CONFIG_SYS_SDRC_CR_VAL							\
> +		(AT91_SDRAMC_NC_9 |						\
> +		 AT91_SDRAMC_NR_13 |						\
> +		 AT91_SDRAMC_NB_4 |						\
> +		 AT91_SDRAMC_CAS_3 |						\
> +		 AT91_SDRAMC_DBW_32 |						\
> +		 (1 <<  8) |		/* Write Recovery Delay */		\
> +		 (7 << 12) |		/* Row Cycle Delay */			\
> +		 (3 << 16) |		/* Row Precharge Delay */		\
> +		 (2 << 20) |		/* Row to Column Delay */		\
> +		 (5 << 24) |		/* Active to Precharge Delay */		\
> +		 (1 << 28))		/* Exit Self Refresh to Active Delay */
> +
> +/* Memory Device Register -> SDRAM */
> +#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
> +#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
> +#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
> +#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
> +#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
> +#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
> +#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
> +
> +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
> +#define CONFIG_SYS_SMC0_SETUP0_VAL					\
> +		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
> +		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
> +#define CONFIG_SYS_SMC0_PULSE0_VAL					\
> +		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
> +		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
> +#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
> +		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
> +#define CONFIG_SYS_SMC0_MODE0_VAL				\
> +		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
> +		 AT91_SMC_DBW_16 |				\
> +		 AT91_SMC_TDFMODE |				\
> +		 AT91_SMC_TDF_(6))
> +
> +/* user reset enable */
> +#define CONFIG_SYS_RSTC_RMR_VAL			\
> +		(AT91_RSTC_KEY |		\
> +		AT91_RSTC_PROCRST |		\
> +		AT91_RSTC_RSTTYP_WAKEUP |	\
> +		AT91_RSTC_RSTTYP_WATCHDOG)
> +
> +/* Disable Watchdog */
> +#define CONFIG_SYS_WDTC_WDMR_VAL				\
> +		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
> +		 AT91_WDT_WDV |					\
> +		 AT91_WDT_WDDIS |				\
> +		 AT91_WDT_WDD)
> +
> +#endif	/* __CONFIG_H */
> diff --git a/arch/arm/boards/pm9261/env/config b/arch/arm/boards/pm9261/env/config
> new file mode 100644
> index 0000000..f7e133e
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/env/config
> @@ -0,0 +1,41 @@
> +#!/bin/sh
> +
> +# use 'dhcp' to do dhcp in barebox and in kernel
> +# use 'none' if you want to skip kernel ip autoconfiguration
> +ip=dhcp
> +
> +# or set your networking parameters here
> +#eth0.ipaddr=a.b.c.d
> +#eth0.netmask=a.b.c.d
> +#eth0.gateway=a.b.c.d
> +#eth0.serverip=a.b.c.d
> +
> +# can be either 'net' or 'nand'
> +kernel_loc=net
> +# can be either 'net', 'nand' or 'initrd'
> +rootfs_loc=net
> +
> +# can be either 'jffs2' or 'ubifs'
> +rootfs_type=ubifs
> +rootfsimage=root.$rootfs_type
> +
> +# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> +#kernelimage_type=zimage
> +#kernelimage=zImage
> +kernelimage_type=uimage
> +kernelimage=uImage
> +#kernelimage_type=raw
> +#kernelimage=Image
> +#kernelimage_type=raw_lzo
> +#kernelimage=Image.lzo
> +
> +nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
> +rootfs_mtdblock_nor=3
> +
> +autoboot_timeout=3
> +
> +bootargs="console=ttyS0,115200"
> +
> +# set a fancy prompt (if support is compiled in)
> +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> +
> diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
> new file mode 100644
> index 0000000..6fb14f7
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/init.c
> @@ -0,0 +1,168 @@
> +/*
> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <net.h>
> +#include <init.h>
> +#include <environment.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <partition.h>
> +#include <fs.h>
> +#include <fcntl.h>
> +#include <asm/io.h>
> +#include <asm/hardware.h>
> +#include <nand.h>
> +#include <linux/mtd/nand.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/board.h>
> +#include <mach/gpio.h>
> +#include <mach/io.h>
> +#include <mach/at91sam9_smc.h>
> +#include <mach/sam9_smc.h>
> +#include <dm9000.h>
> +
> +static struct atmel_nand_data nand_pdata = {
> +	.ale		= 22,
> +	.cle		= 21,
> +/*	.det_pin	= ... not connected */
> +	.rdy_pin	= AT91_PIN_PA16,
> +	.enable_pin	= AT91_PIN_PC14,
> +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
> +	.bus_width_16	= 1,
> +#else
> +	.bus_width_16	= 0,
> +#endif
> +};
> +
> +static struct sam9_smc_config pm_nand_smc_config = {
> +	.ncs_read_setup		= 0,
> +	.nrd_setup		= 1,
> +	.ncs_write_setup	= 0,
> +	.nwe_setup		= 1,
> +
> +	.ncs_read_pulse		= 3,
> +	.nrd_pulse		= 3,
> +	.ncs_write_pulse	= 3,
> +	.nwe_pulse		= 3,
> +
> +	.read_cycle		= 5,
> +	.write_cycle		= 5,
> +
> +	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
> +	.tdf_cycles		= 2,
> +};
> +
> +static void pm_add_device_nand(void)
> +{
> +	/* setup bus-width (8 or 16) */
> +	if (nand_pdata.bus_width_16)
> +		pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
> +	else
> +		pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
> +
> +	/* configure chip-select 3 (NAND) */
> +	sam9_smc_configure(3, &pm_nand_smc_config);
> +
> +	at91_add_device_nand(&nand_pdata);
> +}
> +
> +/*
> + * DM9000 ethernet device
> + */
> +#if defined(CONFIG_DRIVER_NET_DM9000)
> +static struct dm9000_platform_data dm9000_data = {
> +	.iobase		= AT91_CHIPSELECT_2,
> +	.iodata		= AT91_CHIPSELECT_2 + 4,
> +	.buswidth	= DM9000_WIDTH_16,
> +	.srom		= 1,
> +};
> +
> +static struct device_d dm9000_dev = {
> +	.id		= 0,
> +	.name		= "dm9000",
> +	.map_base	= AT91_CHIPSELECT_2,
> +	.size		= 8,
> +	.platform_data	= &dm9000_data,
> +};
> +
> +/*
> + * SMC timings for the DM9000.
> + * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
> + */
> +static struct sam9_smc_config __initdata dm9000_smc_config = {
> +	.ncs_read_setup		= 0,
> +	.nrd_setup		= 2,
> +	.ncs_write_setup	= 0,
> +	.nwe_setup		= 2,
> +
> +	.ncs_read_pulse		= 8,
> +	.nrd_pulse		= 4,
> +	.ncs_write_pulse	= 8,
> +	.nwe_pulse		= 4,
> +
> +	.read_cycle		= 16,
> +	.write_cycle		= 16,
> +
> +	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
> +	.tdf_cycles		= 1,
> +};
> +
> +static void __init pm_add_device_dm9000(void)
> +{
> +	/* Configure chip-select 2 (DM9000) */
> +	sam9_smc_configure(2, &dm9000_smc_config);
> +
> +	register_device(&dm9000_dev);
> +}
> +#else
> +static void __init ek_add_device_dm9000(void) {}
> +#endif /* CONFIG_DRIVER_NET_DM9000 */
> +
> +static struct device_d cfi_dev = {
> +	.id		= 0,
> +	.name		= "cfi_flash",
> +	.map_base	= AT91_CHIPSELECT_0,
> +	.size		= 4 * 1024 * 1024,
> +};
> +
> +static int pm9261_devices_init(void)
> +{
> +	at91_add_device_sdram(64 * 1024 * 1024);
> +	pm_add_device_nand();
> +	register_device(&cfi_dev);
> +	pm_add_device_dm9000();
> +
> +	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
> +	devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
> +
> +	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
> +	armlinux_set_architecture(MACH_TYPE_PM9261);
> +
> +	return 0;
> +}
> +device_initcall(pm9261_devices_init);
> +
> +static int pm9261_console_init(void)
> +{
> +	at91_register_uart(0, 0);
> +	return 0;
> +}
> +console_initcall(pm9261_console_init);
> diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
> new file mode 100644
> index 0000000..0bd9483
> --- /dev/null
> +++ b/arch/arm/configs/pm9261_defconfig
> @@ -0,0 +1,52 @@
> +CONFIG_ARCH_AT91SAM9261=y
> +CONFIG_MACH_PM9261=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PROMPT="PM9261:"
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PARTITION=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9261/env/"
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_PASSWD=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_UNLZO=y
> +CONFIG_NET=y
> +CONFIG_NET_DHCP=y
> +CONFIG_NET_NFS=y
> +CONFIG_NET_PING=y
> +CONFIG_NET_TFTP=y
> +CONFIG_NET_TFTP_PUSH=y
> +CONFIG_NET_RESOLV=y
> +CONFIG_DRIVER_NET_DM9000=y
> +# CONFIG_SPI is not set
> +CONFIG_DRIVER_CFI=y
> +CONFIG_CFI_BUFFER_WRITE=y
> +CONFIG_MTD=y
> +CONFIG_NAND=y
> +CONFIG_NAND_ATMEL=y
> +CONFIG_UBI=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index b3932f3..f0a81f4 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -10,6 +10,7 @@ config BOARDINFO
>  	default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
>  	default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
>  	default "Bucyrus MMC-CPU" if MACH_MMCCPU
> +	default "Ronetix PM9261" if MACH_PM9261
>  	default "Ronetix PM9263" if MACH_PM9263
>  
>  config HAVE_NAND_ATMEL_BUSWIDTH_16
> @@ -74,6 +75,13 @@ config MACH_AT91SAM9261EK
>  	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
>  	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
>  
> +config MACH_PM9261
> +	bool "Ronetix PM9261"
> +	select HAS_DM9000
> +	select MACH_HAS_LOWLEVEL_INIT
> +	help
> +	  Say y here if you are using the Ronetix PM9261 Board
> +
>  endchoice
>  
>  endif
> -- 
> 1.7.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 2/6] at91: add Ronetix pm9261 board support
  2010-11-10 11:44 [PATCH 1/6] at91: Introduction of at91sam9261 SOC Jean-Christophe PLAGNIOL-VILLARD
@ 2010-11-10 11:44 ` Jean-Christophe PLAGNIOL-VILLARD
  2010-11-10 15:02   ` Sascha Hauer
  0 siblings, 1 reply; 5+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2010-11-10 11:44 UTC (permalink / raw)
  To: barebox; +Cc: Ilko Iliev

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Ilko Iliev <iliev@ronetix.at>
---
 arch/arm/Makefile                 |    1 +
 arch/arm/boards/pm9261/Makefile   |    1 +
 arch/arm/boards/pm9261/config.h   |  110 ++++++++++++++++++++++++
 arch/arm/boards/pm9261/env/config |   41 +++++++++
 arch/arm/boards/pm9261/init.c     |  168 +++++++++++++++++++++++++++++++++++++
 arch/arm/configs/pm9261_defconfig |   52 +++++++++++
 arch/arm/mach-at91/Kconfig        |    8 ++
 7 files changed, 381 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/pm9261/Makefile
 create mode 100644 arch/arm/boards/pm9261/config.h
 create mode 100644 arch/arm/boards/pm9261/env/config
 create mode 100644 arch/arm/boards/pm9261/init.c
 create mode 100644 arch/arm/configs/pm9261_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a2ef430..80c5561 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -79,6 +79,7 @@ board-$(CONFIG_MACH_PCA100)			:= phycard-i.MX27
 board-$(CONFIG_MACH_PCM037)			:= pcm037
 board-$(CONFIG_MACH_PCM038)			:= pcm038
 board-$(CONFIG_MACH_PCM043)			:= pcm043
+board-$(CONFIG_MACH_PM9261)			:= pm9261
 board-$(CONFIG_MACH_PM9263)			:= pm9263
 board-$(CONFIG_MACH_SCB9328)			:= scb9328
 board-$(CONFIG_MACH_NESO)			:= guf-neso
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/pm9261/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
new file mode 100644
index 0000000..1c57448
--- /dev/null
+++ b/arch/arm/boards/pm9261/config.h
@@ -0,0 +1,110 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000	/* 16.367 MHz crystal */
+
+#define MASTER_PLL_DIV		15
+#define MASTER_PLL_MUL		162
+#define MAIN_PLL_DIV		2
+
+/* clocks */
+#define CONFIG_SYS_MOR_VAL						\
+		(AT91_PMC_MOSCEN |					\
+		 (255 << 8))		/* Main Oscillator Start-up Time */
+#define CONFIG_SYS_PLLAR_VAL						\
+		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
+		 AT91_PMC_OUT |						\
+		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR1_VAL		\
+		(AT91_PMC_CSS_SLOW |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define	CONFIG_SYS_MCKR2_VAL		\
+		(AT91_PMC_CSS_PLLA |	\
+		 AT91_PMC_PRES_1 |	\
+		 AT91SAM9_PMC_MDIV_2 |	\
+		 AT91_PMC_PDIV_1)
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000
+
+/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
+#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
+       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1		AT91_SDRAMC_MODE_NORMAL
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
+/* SDRAMC_CR - Configuration register*/
+#define CONFIG_SYS_SDRC_CR_VAL							\
+		(AT91_SDRAMC_NC_9 |						\
+		 AT91_SDRAMC_NR_13 |						\
+		 AT91_SDRAMC_NB_4 |						\
+		 AT91_SDRAMC_CAS_3 |						\
+		 AT91_SDRAMC_DBW_32 |						\
+		 (1 <<  8) |		/* Write Recovery Delay */		\
+		 (7 << 12) |		/* Row Cycle Delay */			\
+		 (3 << 16) |		/* Row Precharge Delay */		\
+		 (2 << 20) |		/* Row to Column Delay */		\
+		 (5 << 24) |		/* Active to Precharge Delay */		\
+		 (1 << 28))		/* Exit Self Refresh to Active Delay */
+
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL					\
+		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
+		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL					\
+		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
+		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
+		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL				\
+		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
+		 AT91_SMC_DBW_16 |				\
+		 AT91_SMC_TDFMODE |				\
+		 AT91_SMC_TDF_(6))
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL			\
+		(AT91_RSTC_KEY |		\
+		AT91_RSTC_PROCRST |		\
+		AT91_RSTC_RSTTYP_WAKEUP |	\
+		AT91_RSTC_RSTTYP_WATCHDOG)
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL				\
+		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
+		 AT91_WDT_WDV |					\
+		 AT91_WDT_WDDIS |				\
+		 AT91_WDT_WDD)
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/pm9261/env/config b/arch/arm/boards/pm9261/env/config
new file mode 100644
index 0000000..f7e133e
--- /dev/null
+++ b/arch/arm/boards/pm9261/env/config
@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'net' or 'nand'
+kernel_loc=net
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nor=3
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
+
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
new file mode 100644
index 0000000..6fb14f7
--- /dev/null
+++ b/arch/arm/boards/pm9261/init.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <linux/mtd/nand.h>
+#include <mach/at91_pmc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <dm9000.h>
+
+static struct atmel_nand_data nand_pdata = {
+	.ale		= 22,
+	.cle		= 21,
+/*	.det_pin	= ... not connected */
+	.rdy_pin	= AT91_PIN_PA16,
+	.enable_pin	= AT91_PIN_PC14,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config pm_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void pm_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (nand_pdata.bus_width_16)
+		pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &pm_nand_smc_config);
+
+	at91_add_device_nand(&nand_pdata);
+}
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DRIVER_NET_DM9000)
+static struct dm9000_platform_data dm9000_data = {
+	.iobase		= AT91_CHIPSELECT_2,
+	.iodata		= AT91_CHIPSELECT_2 + 4,
+	.buswidth	= DM9000_WIDTH_16,
+	.srom		= 1,
+};
+
+static struct device_d dm9000_dev = {
+	.id		= 0,
+	.name		= "dm9000",
+	.map_base	= AT91_CHIPSELECT_2,
+	.size		= 8,
+	.platform_data	= &dm9000_data,
+};
+
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 8,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 16,
+	.write_cycle		= 16,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+	.tdf_cycles		= 1,
+};
+
+static void __init pm_add_device_dm9000(void)
+{
+	/* Configure chip-select 2 (DM9000) */
+	sam9_smc_configure(2, &dm9000_smc_config);
+
+	register_device(&dm9000_dev);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DRIVER_NET_DM9000 */
+
+static struct device_d cfi_dev = {
+	.id		= 0,
+	.name		= "cfi_flash",
+	.map_base	= AT91_CHIPSELECT_0,
+	.size		= 4 * 1024 * 1024,
+};
+
+static int pm9261_devices_init(void)
+{
+	at91_add_device_sdram(64 * 1024 * 1024);
+	pm_add_device_nand();
+	register_device(&cfi_dev);
+	pm_add_device_dm9000();
+
+	devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
+	devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
+
+	armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+	armlinux_set_architecture(MACH_TYPE_PM9261);
+
+	return 0;
+}
+device_initcall(pm9261_devices_init);
+
+static int pm9261_console_init(void)
+{
+	at91_register_uart(0, 0);
+	return 0;
+}
+console_initcall(pm9261_console_init);
diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
new file mode 100644
index 0000000..0bd9483
--- /dev/null
+++ b/arch/arm/configs/pm9261_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARCH_AT91SAM9261=y
+CONFIG_MACH_PM9261=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="PM9261:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9261/env/"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNLZO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_DM9000=y
+# CONFIG_SPI is not set
+CONFIG_DRIVER_CFI=y
+CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b3932f3..f0a81f4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -10,6 +10,7 @@ config BOARDINFO
 	default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
 	default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
 	default "Bucyrus MMC-CPU" if MACH_MMCCPU
+	default "Ronetix PM9261" if MACH_PM9261
 	default "Ronetix PM9263" if MACH_PM9263
 
 config HAVE_NAND_ATMEL_BUSWIDTH_16
@@ -74,6 +75,13 @@ config MACH_AT91SAM9261EK
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 
+config MACH_PM9261
+	bool "Ronetix PM9261"
+	select HAS_DM9000
+	select MACH_HAS_LOWLEVEL_INIT
+	help
+	  Say y here if you are using the Ronetix PM9261 Board
+
 endchoice
 
 endif
-- 
1.7.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2010-11-11  5:27 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-10 11:44 [PATCH 1/6] at91: Introduction of at91sam9261 SOC Jean-Christophe PLAGNIOL-VILLARD
2010-11-10 11:44 ` [PATCH 2/6] at91: add Ronetix pm9261 board support Jean-Christophe PLAGNIOL-VILLARD
2010-11-10 11:44 [PATCH 1/6] at91: Introduction of at91sam9261 SOC Jean-Christophe PLAGNIOL-VILLARD
2010-11-10 11:44 ` [PATCH 2/6] at91: add Ronetix pm9261 board support Jean-Christophe PLAGNIOL-VILLARD
2010-11-10 15:02   ` Sascha Hauer
2010-11-11  5:24     ` Jean-Christophe PLAGNIOL-VILLARD

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox