mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Juergen Beisert <juergen@kreuzholzen.de>
Subject: [PATCH 07/15] mini2440: Add PLL settings
Date: Sun, 13 Feb 2011 15:10:44 +0100	[thread overview]
Message-ID: <1297606252-802-8-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1297606252-802-1-git-send-email-jbe@pengutronix.de>

From: Juergen Beisert <juergen@kreuzholzen.de>

This is required in order to enable booting from NAND and using the generic
S3C2440 setup routines.

Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
---
 arch/arm/boards/mini2440/config.h |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/mini2440/config.h b/arch/arm/boards/mini2440/config.h
index a664017..1edd69c 100644
--- a/arch/arm/boards/mini2440/config.h
+++ b/arch/arm/boards/mini2440/config.h
@@ -26,6 +26,28 @@
  */
 #define S3C24XX_CLOCK_REFERENCE 12000000
 
+/**
+ * Define the main clock configuration to be used in register CLKDIVN
+ *
+ * We must limit the frequency of the connected SDRAMs with the clock ratio
+ * setup to 1:4:8. This will result into FCLK:HCLK:PCLK = 405Mhz:102MHz:51MHz
+ */
+#define BOARD_SPECIFIC_CLKDIVN 0x05
+
+/**
+ * Define the MPLL configuration to be used in register MPLLCON
+ *
+ * We want the MPLL to run at 405.0 MHz
+ */
+#define BOARD_SPECIFIC_MPLL ((0x7f << 12) + (2 << 4) + 1)
+
+/**
+ * Define the UPLL configuration to be used in register UPLLCON
+ *
+ * We want the UPLL to run at 48.0 MHz
+ */
+#define BOARD_SPECIFIC_UPLL ((0x38 << 12) + (2 << 4) + 2)
+
 /*
  * Flash access timings
  * Tacls  = 0ns (but 20ns data setup time)
-- 
1.7.2.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2011-02-13 14:11 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-13 14:10 RFC: Booting from NAND for mini2440 platform Juergen Beisert
2011-02-13 14:10 ` [PATCH 01/15] S3C24xx: Just remove a trailing whitespace Juergen Beisert
2011-02-13 14:10 ` [PATCH 02/15] MACH-S3C24xx: Fix typo in UART2_SIZE macro Juergen Beisert
2011-02-13 14:10 ` [PATCH 03/15] MACH-S324xx: Change detection method of the second SDRAM bank Juergen Beisert
2011-02-13 14:10 ` [PATCH 04/15] mini2440: Be a little be pedantic with the include file order Juergen Beisert
2011-02-13 14:10 ` [PATCH 05/15] mini2440: Fix a runtime warning when '.id=0' is used Juergen Beisert
2011-02-13 14:10 ` [PATCH 06/15] mini2440: Add some useful documentation Juergen Beisert
2011-02-13 14:10 ` Juergen Beisert [this message]
2011-02-13 14:10 ` [PATCH 08/15] mini2440: Add SDRAM config settings Juergen Beisert
2011-02-13 14:10 ` [PATCH 09/15] mini2440: Configure debug UART pins very early Juergen Beisert
2011-02-13 14:10 ` [PATCH 10/15] mini2440: Add SDRAM size autodetection Juergen Beisert
2011-02-13 14:10 ` [PATCH 11/15] mini2440: Add GPIO settings Juergen Beisert
2011-02-13 14:10 ` [PATCH 12/15] mini2440: Add MCI support Juergen Beisert
2011-02-13 14:10 ` [PATCH 13/15] mini2440: Add booting from NAND support Juergen Beisert
2011-02-13 14:10 ` [PATCH 14/15] mini2440: Remove some A9M2440 platform leftovers Juergen Beisert
2011-02-14  9:35   ` Juergen Beisert
2011-02-13 14:10 ` [PATCH 15/15] mini2440: Use generic environment Juergen Beisert
2011-02-13 19:01   ` mini2440: Forgotten patches to make it work (1 of 2) Juergen Beisert
2011-02-13 19:49     ` mini2440: Forgotten patches to make it work (2 " Juergen Beisert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1297606252-802-8-git-send-email-jbe@pengutronix.de \
    --to=jbe@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=juergen@kreuzholzen.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox