mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init
Date: Sat, 17 Dec 2011 15:52:01 +0100	[thread overview]
Message-ID: <1324133529-2036-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1324133529-2036-1-git-send-email-s.hauer@pengutronix.de>

- move code which can be shared between i.MX53 and i.MX51
  to a common file
- rename mx53_init_lowlevel to imx53_init_lowlevel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/freescale-mx53-loco/board.c |    2 +-
 arch/arm/boards/freescale-mx53-smd/board.c  |    2 +-
 arch/arm/mach-imx/Makefile                  |    4 +-
 arch/arm/mach-imx/imx53.c                   |   61 +++-----------------------
 arch/arm/mach-imx/include/mach/imx5.h       |    8 ++++
 arch/arm/mach-imx/include/mach/imx53.h      |    6 ---
 6 files changed, 19 insertions(+), 64 deletions(-)
 create mode 100644 arch/arm/mach-imx/include/mach/imx5.h
 delete mode 100644 arch/arm/mach-imx/include/mach/imx53.h

diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
index aec2254..8d1cbf5 100644
--- a/arch/arm/boards/freescale-mx53-loco/board.c
+++ b/arch/arm/boards/freescale-mx53-loco/board.c
@@ -34,7 +34,7 @@
 #include <mach/gpio.h>
 #include <mach/imx-nand.h>
 #include <mach/iim.h>
-#include <mach/imx53.h>
+#include <mach/imx5.h>
 
 #include <asm/armlinux.h>
 #include <io.h>
diff --git a/arch/arm/boards/freescale-mx53-smd/board.c b/arch/arm/boards/freescale-mx53-smd/board.c
index 325458e..d14c1f2 100644
--- a/arch/arm/boards/freescale-mx53-smd/board.c
+++ b/arch/arm/boards/freescale-mx53-smd/board.c
@@ -34,7 +34,7 @@
 #include <mach/gpio.h>
 #include <mach/imx-nand.h>
 #include <mach/iim.h>
-#include <mach/imx53.h>
+#include <mach/imx5.h>
 
 #include <asm/armlinux.h>
 #include <io.h>
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0b3b781..a9aa9e2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -5,8 +5,8 @@ obj-$(CONFIG_ARCH_IMX21) += speed-imx21.o imx21.o iomux-v1.o
 obj-$(CONFIG_ARCH_IMX27) += speed-imx27.o imx27.o iomux-v1.o
 obj-$(CONFIG_ARCH_IMX31) += speed-imx31.o imx31.o iomux-v2.o
 obj-$(CONFIG_ARCH_IMX35) += speed-imx35.o imx35.o iomux-v3.o
-obj-$(CONFIG_ARCH_IMX51) += speed-imx51.o imx51.o iomux-v3.o
-obj-$(CONFIG_ARCH_IMX53) += speed-imx53.o imx53.o iomux-v3.o
+obj-$(CONFIG_ARCH_IMX51) += speed-imx51.o imx51.o iomux-v3.o imx5.o
+obj-$(CONFIG_ARCH_IMX53) += speed-imx53.o imx53.o iomux-v3.o imx5.o
 obj-$(CONFIG_IMX_CLKO)	+= clko.o
 obj-$(CONFIG_IMX_IIM)	+= iim.o
 obj-$(CONFIG_NAND_IMX) += nand.o
diff --git a/arch/arm/mach-imx/imx53.c b/arch/arm/mach-imx/imx53.c
index 64bec86..2fb18e7 100644
--- a/arch/arm/mach-imx/imx53.c
+++ b/arch/arm/mach-imx/imx53.c
@@ -19,6 +19,7 @@
 #include <common.h>
 #include <io.h>
 #include <sizes.h>
+#include <mach/imx5.h>
 #include <mach/imx53-regs.h>
 #include <mach/clock-imx51_53.h>
 
@@ -45,63 +46,17 @@ static int imx53_init(void)
 }
 coredevice_initcall(imx53_init);
 
-static void setup_pll(void __iomem *base, int freq, u32 op, u32 mfd, u32 mfn)
-{
-	u32 r;
-
-	/*
-	 * If freq < 300MHz, we need to set dpdck0_2_en to 0
-	 */
-	r = 0x00000232;
-	if (freq >= 300)
-		r |= 0x1000;
-
-	writel(r, base + MX5_PLL_DP_CTL);
-
-	writel(0x2, base + MX5_PLL_DP_CONFIG);
-
-	writel(op, base + MX5_PLL_DP_OP);
-	writel(op, base + MX5_PLL_DP_HFS_OP);
-
-	writel(mfd, base + MX5_PLL_DP_MFD);
-	writel(mfd, base + MX5_PLL_DP_HFS_MFD);
-
-	writel(mfn, base + MX5_PLL_DP_MFN);
-	writel(mfn, base + MX5_PLL_DP_HFS_MFN);
+#define setup_pll_1000(base)	imx5_setup_pll((base), 1000, ((10 << 4) + ((1 - 1) << 0)), (12 - 1), 5)
+#define setup_pll_400(base)	imx5_setup_pll((base), 400, ((8 << 4) + ((2 - 1)  << 0)), (3 - 1), 1)
+#define setup_pll_455(base)	imx5_setup_pll((base), 455, ((9 << 4) + ((2 - 1)  << 0)), (48 - 1), 23)
+#define setup_pll_216(base)	imx5_setup_pll((base), 216, ((8 << 4) + ((2 - 1)  << 0)), (1 - 1), 1)
 
-	writel(0x00001232, base + MX5_PLL_DP_CTL);
-
-	while (!(readl(base + MX5_PLL_DP_CTL) & 1));
-}
-
-#define setup_pll_1000(base)	setup_pll((base), 1000, ((10 << 4) + ((1 - 1) << 0)), (12 - 1), 5)
-#define setup_pll_400(base)	setup_pll((base), 400, ((8 << 4) + ((2 - 1)  << 0)), (3 - 1), 1)
-#define setup_pll_455(base)	setup_pll((base), 455, ((9 << 4) + ((2 - 1)  << 0)), (48 - 1), 23)
-#define setup_pll_216(base)	setup_pll((base), 216, ((8 << 4) + ((2 - 1)  << 0)), (1 - 1), 1)
-
-int mx53_init_lowlevel(void)
+void imx53_init_lowlevel(void)
 {
 	void __iomem *ccm = (void __iomem *)MX53_CCM_BASE_ADDR;
 	u32 r;
 
-	/* ARM errata ID #468414 */
-	__asm__ __volatile__("mrc 15, 0, %0, c1, c0, 1":"=r"(r));
-	r |= (1 << 5);    /* enable L1NEON bit */
-	r &= ~(1 << 1);   /* explicitly disable L2 cache */
-	__asm__ __volatile__("mcr 15, 0, %0, c1, c0, 1" : : "r"(r));
-
-        /* reconfigure L2 cache aux control reg */
-	r = 0xc0 |		/* tag RAM */
-		0x4 |		/* data RAM */
-		(1 << 24) |	/* disable write allocate delay */
-		(1 << 23) |	/* disable write allocate combine */
-		(1 << 22);	/* disable write allocate */
-
-	__asm__ __volatile__("mcr 15, 1, %0, c9, c0, 2" : : "r"(r));
-
-	__asm__ __volatile__("mrc 15, 0, %0, c1, c0, 1":"=r"(r));
-	r |= 1 << 1; 	/* enable L2 cache */
-	__asm__ __volatile__("mcr 15, 0, %0, c1, c0, 1" : : "r"(r));
+	imx5_init_lowlevel();
 
 	/*
 	 * AIPS setup - Only setup MPROTx registers.
@@ -195,6 +150,4 @@ int mx53_init_lowlevel(void)
 	writel(0xffffffff, ccm + MX53_CCM_CCGR7);
 
 	writel(0, ccm + MX5_CCM_CCDR);
-
-	return 0;
 }
diff --git a/arch/arm/mach-imx/include/mach/imx5.h b/arch/arm/mach-imx/include/mach/imx5.h
new file mode 100644
index 0000000..d034082
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx5.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_MX5_H
+#define __MACH_MX5_H
+
+void imx53_init_lowlevel(void);
+void imx5_setup_pll(void __iomem *base, int freq, u32 op, u32 mfd, u32 mfn);
+void imx5_init_lowlevel(void);
+
+#endif /* __MACH_MX53_H */
diff --git a/arch/arm/mach-imx/include/mach/imx53.h b/arch/arm/mach-imx/include/mach/imx53.h
deleted file mode 100644
index b1f30d3..0000000
--- a/arch/arm/mach-imx/include/mach/imx53.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MACH_MX53_H
-#define __MACH_MX53_H
-
-int mx53_init_lowlevel(void);
-
-#endif /* __MACH_MX53_H */
-- 
1.7.7.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-12-17 14:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-17 14:52 Thumb-2 support Sascha Hauer
2011-12-17 14:52 ` Sascha Hauer [this message]
2011-12-18 14:03   ` [PATCH 1/9] ARM i.MX5: prepare to add a imx51_lowlevel_init Eric Bénard
2011-12-19 10:18   ` Sascha Hauer
2011-12-17 14:52 ` [PATCH 2/9] ARM i.MX51: implement " Sascha Hauer
2011-12-17 14:52 ` [PATCH 3/9] ARM i.MX51 babbage: use generic lowlevel init function Sascha Hauer
2011-12-17 14:52 ` [PATCH 4/9] ARM eukrea i.MX51: use generic lowlevel init Sascha Hauer
2011-12-17 14:52 ` [PATCH 5/9] ARM: update string functions from Linux Kernel Sascha Hauer
2011-12-17 14:52 ` [PATCH 6/9] ARM cache-armv7: use thumb-2 instructions where necessary Sascha Hauer
2011-12-17 14:52 ` [PATCH 7/9] ARM: move exception vectors away from start of binary Sascha Hauer
2011-12-18 23:43   ` Peter Korsgaard
2011-12-20 14:07   ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-21 10:09     ` Sascha Hauer
2012-01-01  4:37   ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-02 14:13     ` Sascha Hauer
2012-01-02 15:09       ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-23 12:07         ` Sascha Hauer
2012-01-24  4:39           ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-17 14:52 ` [PATCH 8/9] ARM: get runtime offset of board_init_lowlevel_return by using separate section Sascha Hauer
2011-12-17 14:52 ` [PATCH 9/9] ARM: Allow to compile in thumb-2 mode Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324133529-2036-2-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox