mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 12/12] usb-a926x: update defconfig
Date: Sat, 31 Dec 2011 16:21:38 +0100	[thread overview]
Message-ID: <1325344898-7076-12-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20111231151655.GB945@game.jcrosoft.org>

enable led, triggers, uimage, oftree, dfu, etc...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/configs/usb_a9260_defconfig        |   20 ++++++++++++++++----
 arch/arm/configs/usb_a9263_128mib_defconfig |   20 ++++++++++++++++----
 arch/arm/configs/usb_a9263_defconfig        |   20 ++++++++++++++++----
 arch/arm/configs/usb_a9g20_128mib_defconfig |   20 ++++++++++++++++----
 arch/arm/configs/usb_a9g20_defconfig        |   20 ++++++++++++++++----
 5 files changed, 80 insertions(+), 20 deletions(-)

diff --git a/arch/arm/configs/usb_a9260_defconfig b/arch/arm/configs/usb_a9260_defconfig
index adcb603..6c6eac2 100644
--- a/arch/arm/configs/usb_a9260_defconfig
+++ b/arch/arm/configs/usb_a9260_defconfig
@@ -1,9 +1,8 @@
 CONFIG_ARCH_AT91SAM9260=y
 CONFIG_MACH_USB_A9260=y
 CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_KALLSYMS=y
 CONFIG_PROMPT="USB-9G20:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -34,14 +33,19 @@ CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
@@ -54,5 +58,13 @@ CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_ZLIB=y
diff --git a/arch/arm/configs/usb_a9263_128mib_defconfig b/arch/arm/configs/usb_a9263_128mib_defconfig
index 8d5342e..0b0ad80 100644
--- a/arch/arm/configs/usb_a9263_128mib_defconfig
+++ b/arch/arm/configs/usb_a9263_128mib_defconfig
@@ -1,10 +1,9 @@
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_USB_A9263=y
 CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_AT91_HAVE_SRAM_128M=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_KALLSYMS=y
 CONFIG_PROMPT="USB-9G20:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -35,14 +34,19 @@ CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
@@ -55,5 +59,13 @@ CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_ZLIB=y
diff --git a/arch/arm/configs/usb_a9263_defconfig b/arch/arm/configs/usb_a9263_defconfig
index 9f53431..168a5d1 100644
--- a/arch/arm/configs/usb_a9263_defconfig
+++ b/arch/arm/configs/usb_a9263_defconfig
@@ -1,9 +1,8 @@
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_USB_A9263=y
 CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_KALLSYMS=y
 CONFIG_PROMPT="USB-9G20:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -34,14 +33,19 @@ CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
@@ -54,5 +58,13 @@ CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_ZLIB=y
diff --git a/arch/arm/configs/usb_a9g20_128mib_defconfig b/arch/arm/configs/usb_a9g20_128mib_defconfig
index 3c0e6f7..a02002f 100644
--- a/arch/arm/configs/usb_a9g20_128mib_defconfig
+++ b/arch/arm/configs/usb_a9g20_128mib_defconfig
@@ -1,10 +1,9 @@
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_USB_A9G20=y
 CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_AT91_HAVE_SRAM_128M=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_KALLSYMS=y
 CONFIG_PROMPT="USB-9G20:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -35,14 +34,19 @@ CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
@@ -55,5 +59,13 @@ CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_ZLIB=y
diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
index 2bcb8eb..e4dd424 100644
--- a/arch/arm/configs/usb_a9g20_defconfig
+++ b/arch/arm/configs/usb_a9g20_defconfig
@@ -1,9 +1,8 @@
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_USB_A9G20=y
 CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_KALLSYMS=y
 CONFIG_PROMPT="USB-9G20:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -34,14 +33,19 @@ CONFIG_CMD_SHA256SUM=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_MTEST_ALTERNATIVE=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_LED_TRIGGER=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_NFS=y
@@ -54,5 +58,13 @@ CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_MTD=y
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_USB_GADGET=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_ZLIB=y
-- 
1.7.7


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2011-12-31 15:27 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-31 15:16 AT91: Pull Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled Jean-Christophe PLAGNIOL-VILLARD
2012-01-03  9:37   ` Sascha Hauer
2012-01-03 10:33     ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 02/12] ARM: import memcpy_from/toio and memset_io from linux Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 03/12] mtd: atmel_nand: optimize read/write buffer functions Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 04/12] atmel_nand: drop dead code Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 05/12] at91: add sram memory devices Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:42   ` Sascha Hauer
2011-12-31 15:21 ` [PATCH 06/12] at91sam9263ek: add nor partition Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 07/12] at91sam9x: switch lowlevel init to c Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 08/12] at91/gpio: simplify resources Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:40   ` Sascha Hauer
2012-01-04 18:01     ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 18:05     ` Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 09/12] usb-a926x: add led support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 10/12] usb-a926x: add dfu support Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` [PATCH 11/12] at91_udc: update vbus param only if updated Jean-Christophe PLAGNIOL-VILLARD
2011-12-31 15:21 ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325344898-7076-12-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox