From: Juergen Beisert <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling
Date: Mon, 2 Jan 2012 12:44:01 +0100 [thread overview]
Message-ID: <1325504642-9324-14-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1325504642-9324-1-git-send-email-jbe@pengutronix.de>
Keep common code in the MACH instead of re-inventing it in each platform.
Also use S3C* macros for all memory related register.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
arch/arm/boards/a9m2410/a9m2410.c | 47 ++++++----------------
arch/arm/boards/a9m2410/lowlevel_init.S | 4 +-
arch/arm/boards/a9m2440/a9m2410dev.c | 9 ++--
arch/arm/boards/a9m2440/a9m2440.c | 37 +++++++----------
arch/arm/boards/a9m2440/lowlevel_init.S | 6 +-
arch/arm/boards/mini2440/lowlevel_init.S | 4 +-
arch/arm/boards/mini2440/mini2440.c | 13 +++---
arch/arm/mach-samsung/generic.c | 28 ++++++++-----
arch/arm/mach-samsung/include/mach/s3c-busctl.h | 32 +++++++++++++++
arch/arm/mach-samsung/include/mach/s3c-generic.h | 3 +-
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 39 ++++++------------
arch/arm/mach-samsung/lowlevel-init.S | 4 +-
arch/arm/mach-samsung/s3c24xx-clocks.c | 9 +++-
13 files changed, 119 insertions(+), 116 deletions(-)
create mode 100644 arch/arm/mach-samsung/include/mach/s3c-busctl.h
diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
index a66afb9..daaa5c1 100644
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ b/arch/arm/boards/a9m2410/a9m2410.c
@@ -34,6 +34,8 @@
#include <io.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c24xx-nand.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
// {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
static struct s3c24x0_nand_platform_data nand_info = {
@@ -42,38 +44,13 @@ static struct s3c24x0_nand_platform_data nand_info = {
static int a9m2410_mem_init(void)
{
- resource_size_t size = 0;
- uint32_t reg;
+ resource_size_t size;
/*
- * detect the current memory size
* Note: On this card the second SDRAM page is not used
*/
- reg = readl(BANKSIZE);
-
- switch (reg &= 0x7) {
- case 0:
- size = 32 * 1024 * 1024;
- break;
- case 1:
- size = 64 * 1024 * 1024;
- break;
- case 2:
- size = 128 * 1024 * 1024;
- break;
- case 4:
- size = 2 * 1024 * 1024;
- break;
- case 5:
- size = 4 * 1024 * 1024;
- break;
- case 6:
- size = 8 * 1024 * 1024;
- break;
- case 7:
- size = 16 * 1024 * 1024;
- break;
- }
+ s3c24xx_disable_second_sdram_bank();
+ size = s3c24xx_get_memory_size();
/* ---------- configure the GPIOs ------------- */
writel(0x007FFFFF, GPACON);
@@ -100,7 +77,7 @@ static int a9m2410_mem_init(void)
*/
writel(0x40140, MISCCR);
- arm_add_mem_device("ram0", CS6_BASE, size);
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, size);
return 0;
}
@@ -111,19 +88,19 @@ static int a9m2410_devices_init(void)
uint32_t reg;
/* ----------- configure the access to the outer space ---------- */
- reg = readl(BWSCON);
+ reg = readl(S3C_BWSCON);
/* CS#1 to access the network controller */
reg &= ~0xf0;
reg |= 0xe0;
- writel(0x1350, BANKCON1);
+ writel(0x1350, S3C_BANKCON1);
/* CS#2 to the dual 16550 UART */
reg &= ~0xf00;
reg |= 0x400;
- writel(0x0d50, BANKCON2);
+ writel(0x0d50, S3C_BANKCON2);
- writel(reg, BWSCON);
+ writel(reg, S3C_BWSCON);
/* release the reset signal to the network and UART device */
reg = readl(MISCCR);
@@ -138,7 +115,7 @@ static int a9m2410_devices_init(void)
* connected to CS line 1 and interrupt line
* GPIO3, data width is 32 bit
*/
- add_generic_device("smc91c111", -1, NULL, CS1_BASE + 0x300, 16,
+ add_generic_device("smc91c111", -1, NULL, S3C_CS1_BASE + 0x300, 16,
IORESOURCE_MEM, NULL);
#ifdef CONFIG_NAND
@@ -150,7 +127,7 @@ static int a9m2410_devices_init(void)
dev_add_bb_dev("env_raw", "env0");
#endif
- armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+ armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_A9M2410);
return 0;
diff --git a/arch/arm/boards/a9m2410/lowlevel_init.S b/arch/arm/boards/a9m2410/lowlevel_init.S
index 752c668..a106d53 100644
--- a/arch/arm/boards/a9m2410/lowlevel_init.S
+++ b/arch/arm/boards/a9m2410/lowlevel_init.S
@@ -15,9 +15,9 @@ board_init_lowlevel:
bl s3c24x0_disable_wd
/* skip everything here if we are already running from SDRAM */
- cmp pc, #S3C24X0_SDRAM_BASE
+ cmp pc, #S3C_SDRAM_BASE
blo 1f
- cmp pc, #S3C24X0_SDRAM_END
+ cmp pc, #S3C_SDRAM_END
bhs 1f
mov pc, r10
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c
index aa5da88..1da69eb 100644
--- a/arch/arm/boards/a9m2440/a9m2410dev.c
+++ b/arch/arm/boards/a9m2440/a9m2410dev.c
@@ -29,6 +29,7 @@
#include <init.h>
#include <io.h>
#include <mach/s3c-iomap.h>
+#include <mach/s3c-busctl.h>
/**
* Initialize the CPU to be able to work with the a9m2410dev evaluation board
@@ -72,19 +73,19 @@ int a9m2410dev_devices_init(void)
writel((readl(MISCCR) & ~0xFFFF) | 0x0140, MISCCR);
/* ----------- configure the access to the outer space ---------- */
- reg = readl(BWSCON);
+ reg = readl(S3C_BWSCON);
/* CS#1 to access the network controller */
reg &= ~0xf0;
reg |= 0xe0;
- writel(0x1350, BANKCON1);
+ writel(0x1350, S3C_BANKCON1);
/* CS#2 to the dual 16550 UART */
reg &= ~0xf00;
reg |= 0x400;
- writel(0x0d50, BANKCON2);
+ writel(0x0d50, S3C_BANKCON2);
- writel(reg, BWSCON);
+ writel(reg, S3C_BWSCON);
/* release the reset signal to the network and UART device */
reg = readl(MISCCR);
diff --git a/arch/arm/boards/a9m2440/a9m2440.c b/arch/arm/boards/a9m2440/a9m2440.c
index 077d726..56ae914 100644
--- a/arch/arm/boards/a9m2440/a9m2440.c
+++ b/arch/arm/boards/a9m2440/a9m2440.c
@@ -35,6 +35,7 @@
#include <mach/s3c-iomap.h>
#include <mach/s3c24xx-nand.h>
#include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
#include "baseboards.h"
@@ -66,12 +67,6 @@ static int a9m2440_check_for_ram(uint32_t addr)
return rc;
}
-static void a9m2440_disable_second_sdram_bank(void)
-{
- writel(readl(BANKCON7) & ~(0x3 << 15),BANKCON7);
- writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable clock */
-}
-
static int a9m2440_mem_init(void)
{
/*
@@ -80,30 +75,30 @@ static int a9m2440_mem_init(void)
* So we must check here, if the second bank is populated to get the
* correct RAM size.
*/
- switch (readl(BANKSIZE) & 0x7) {
+ switch (readl(S3C_BANKSIZE) & 0x7) {
case 0:
- if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 32 * 1024 * 1024))
- a9m2440_disable_second_sdram_bank();
+ if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 32 * 1024 * 1024))
+ s3c24xx_disable_second_sdram_bank();
break;
case 1:
- if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 64 * 1024 * 1024))
- a9m2440_disable_second_sdram_bank();
+ if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 64 * 1024 * 1024))
+ s3c24xx_disable_second_sdram_bank();
break;
case 2:
- if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 128 * 1024 * 1024))
- a9m2440_disable_second_sdram_bank();
+ if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 128 * 1024 * 1024))
+ s3c24xx_disable_second_sdram_bank();
break;
case 4:
case 5:
case 6: /* not supported on this machine */
break;
default:
- if (a9m2440_check_for_ram(S3C24X0_SDRAM_BASE + 16 * 1024 * 1024))
- a9m2440_disable_second_sdram_bank();
+ if (a9m2440_check_for_ram(S3C_SDRAM_BASE + 16 * 1024 * 1024))
+ s3c24xx_disable_second_sdram_bank();
break;
}
- arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size());
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
return 0;
}
@@ -114,14 +109,14 @@ static int a9m2440_devices_init(void)
uint32_t reg;
/* ----------- configure the access to the outer space ---------- */
- reg = readl(BWSCON);
+ reg = readl(S3C_BWSCON);
/* CS#5 to access the network controller */
reg &= ~0x00f00000;
reg |= 0x00d00000; /* 16 bit */
- writel(0x1f4c, BANKCON5);
+ writel(0x1f4c, S3C_BANKCON5);
- writel(reg, BWSCON);
+ writel(reg, S3C_BWSCON);
#ifdef CONFIG_MACH_A9M2410DEV
a9m2410dev_devices_init();
@@ -140,7 +135,7 @@ static int a9m2440_devices_init(void)
* Connected to CS line 5 + A24 and interrupt line EINT9,
* data width is 16 bit
*/
- add_generic_device("cs8900", -1, NULL, CS5_BASE + (1 << 24) + 0x300, 16,
+ add_generic_device("cs8900", -1, NULL, S3C_CS5_BASE + (1 << 24) + 0x300, 16,
IORESOURCE_MEM, NULL);
#ifdef CONFIG_NAND
@@ -151,7 +146,7 @@ static int a9m2440_devices_init(void)
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
- armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+ armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_A9M2440);
return 0;
diff --git a/arch/arm/boards/a9m2440/lowlevel_init.S b/arch/arm/boards/a9m2440/lowlevel_init.S
index bfdd7f0..57ebe3f 100644
--- a/arch/arm/boards/a9m2440/lowlevel_init.S
+++ b/arch/arm/boards/a9m2440/lowlevel_init.S
@@ -37,7 +37,7 @@ sdram_init:
ldr r4, [r1]
and r4, r4, #0x3
- ldr r1, =S3C24X0_MEMCTL_BASE
+ ldr r1, =S3C_MEMCTL_BASE
/* configure both SDRAM areas with 32 bit data bus width */
ldr r0, =((0x2 << 24) + (0x2 << 28))
str r0, [r1], #0x1c /* post add register offset for bank6 */
@@ -218,9 +218,9 @@ board_init_lowlevel:
bl s3c24x0_disable_wd
/* skip everything here if we are already running from SDRAM */
- cmp pc, #S3C24X0_SDRAM_BASE
+ cmp pc, #S3C_SDRAM_BASE
blo 1f
- cmp pc, #S3C24X0_SDRAM_END
+ cmp pc, #S3C_SDRAM_END
bhs 1f
mov pc, r10
diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S
index f114bb7..1c8860a 100644
--- a/arch/arm/boards/mini2440/lowlevel_init.S
+++ b/arch/arm/boards/mini2440/lowlevel_init.S
@@ -17,9 +17,9 @@ board_init_lowlevel:
bl s3c24x0_disable_wd
/* skip everything here if we are already running from SDRAM */
- cmp pc, #S3C24X0_SDRAM_BASE
+ cmp pc, #S3C_SDRAM_BASE
blo 1f
- cmp pc, #S3C24X0_SDRAM_END
+ cmp pc, #S3C_SDRAM_END
bhs 1f
mov pc, r10
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index ec4eb05..29fd5a8 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -43,6 +43,7 @@
#include <mach/s3c-generic.h>
#include <mach/s3c-mci.h>
#include <mach/s3c24xx-fb.h>
+#include <mach/s3c-busctl.h>
static struct s3c24x0_nand_platform_data nand_info = {
.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
@@ -266,7 +267,7 @@ static const unsigned pin_usage[] = {
static int mini2440_mem_init(void)
{
- arm_add_mem_device("ram0", CS6_BASE, s3c24x0_get_memory_size());
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
return 0;
}
@@ -281,14 +282,14 @@ static int mini2440_devices_init(void)
for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
s3c_gpio_mode(pin_usage[i]);
- reg = readl(BWSCON);
+ reg = readl(S3C_BWSCON);
/* CS#4 to access the network controller */
reg &= ~0x000f0000;
reg |= 0x000d0000; /* 16 bit */
- writel(0x1f4c, BANKCON4);
+ writel(0x1f4c, S3C_BANKCON4);
- writel(reg, BWSCON);
+ writel(reg, S3C_BWSCON);
/* release the reset signal to external devices */
reg = readl(MISCCR);
@@ -298,7 +299,7 @@ static int mini2440_devices_init(void)
add_generic_device("s3c24x0_nand", -1, NULL, S3C24X0_NAND_BASE, 0,
IORESOURCE_MEM, &nand_info);
- add_dm9000_device(0, CS4_BASE + 0x300, CS4_BASE + 0x304,
+ add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304,
IORESOURCE_MEM_16BIT, &dm9000_data);
#ifdef CONFIG_NAND
/* ----------- add some vital partitions -------- */
@@ -316,7 +317,7 @@ static int mini2440_devices_init(void)
IORESOURCE_MEM, &s3c24x0_fb_data);
add_generic_device("ohci", 0, NULL, S3C2410_USB_HOST_BASE, 0x100,
IORESOURCE_MEM, NULL);
- armlinux_set_bootparams((void*)CS6_BASE + 0x100);
+ armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_MINI2440);
return 0;
diff --git a/arch/arm/mach-samsung/generic.c b/arch/arm/mach-samsung/generic.c
index 4a0c87b..cbe0321 100644
--- a/arch/arm/mach-samsung/generic.c
+++ b/arch/arm/mach-samsung/generic.c
@@ -27,55 +27,63 @@
#include <init.h>
#include <clock.h>
#include <io.h>
+#include <sizes.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c-generic.h>
+#include <mach/s3c-busctl.h>
/**
* Calculate the amount of connected and available memory
* @return Memory size in bytes
*/
-uint32_t s3c24x0_get_memory_size(void)
+uint32_t s3c24xx_get_memory_size(void)
{
uint32_t reg, size;
/*
* detect the current memory size
*/
- reg = readl(BANKSIZE);
+ reg = readl(S3C_BANKSIZE);
switch (reg & 0x7) {
case 0:
- size = 32 * 1024 * 1024;
+ size = SZ_32M;
break;
case 1:
- size = 64 * 1024 * 1024;
+ size = SZ_64M;
break;
case 2:
- size = 128 * 1024 * 1024;
+ size = SZ_128M;
break;
case 4:
- size = 2 * 1024 * 1024;
+ size = SZ_2M;
break;
case 5:
- size = 4 * 1024 * 1024;
+ size = SZ_4M;
break;
case 6:
- size = 8 * 1024 * 1024;
+ size = SZ_8M;
break;
default:
- size = 16 * 1024 * 1024;
+ size = SZ_16M;
break;
}
/*
* Is bank7 also configured for SDRAM usage?
*/
- if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+ if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
size <<= 1; /* also count this bank */
return size;
}
+void s3c24xx_disable_second_sdram_bank(void)
+{
+ writel(readl(S3C_BANKCON7) & ~(0x3 << 15), S3C_BANKCON7);
+ writel(readl(MISCCR) | (1 << 18), MISCCR); /* disable its clock */
+}
+
#define S3C_WTCON (S3C_WATCHDOG_BASE)
#define S3C_WTDAT (S3C_WATCHDOG_BASE + 0x04)
#define S3C_WTCNT (S3C_WATCHDOG_BASE + 0x08)
diff --git a/arch/arm/mach-samsung/include/mach/s3c-busctl.h b/arch/arm/mach-samsung/include/mach/s3c-busctl.h
new file mode 100644
index 0000000..4bcf0a7
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c-busctl.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_S3C_BUSCTL_H
+# define __MACH_S3C_BUSCTL_H
+
+#define S3C_BWSCON (S3C_MEMCTL_BASE)
+#define S3C_BANKCON0 (S3C_MEMCTL_BASE + 0x04)
+#define S3C_BANKCON1 (S3C_MEMCTL_BASE + 0x08)
+#define S3C_BANKCON2 (S3C_MEMCTL_BASE + 0x0c)
+#define S3C_BANKCON3 (S3C_MEMCTL_BASE + 0x10)
+#define S3C_BANKCON4 (S3C_MEMCTL_BASE + 0x14)
+#define S3C_BANKCON5 (S3C_MEMCTL_BASE + 0x18)
+#define S3C_BANKCON6 (S3C_MEMCTL_BASE + 0x1c)
+#define S3C_BANKCON7 (S3C_MEMCTL_BASE + 0x20)
+#define S3C_REFRESH (S3C_MEMCTL_BASE + 0x24)
+#define S3C_BANKSIZE (S3C_MEMCTL_BASE + 0x28)
+#define S3C_MRSRB6 (S3C_MEMCTL_BASE + 0x2c)
+#define S3C_MRSRB7 (S3C_MEMCTL_BASE + 0x30)
+
+#endif /* __MACH_S3C_BUSCTL_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 33f025d..4ea3dd7 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -30,4 +30,5 @@ uint32_t s3c_get_fclk(void);
uint32_t s3c_get_hclk(void);
uint32_t s3c_get_pclk(void);
uint32_t s3c_get_uclk(void);
-uint32_t s3c24x0_get_memory_size(void);
+uint32_t s3c24xx_get_memory_size(void);
+void s3c24xx_disable_second_sdram_bank(void);
diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index 7c45c53..4f713be 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -19,9 +19,7 @@
*/
/* S3C2410 device base addresses */
-#define S3C24X0_SDRAM_BASE 0x30000000
-#define S3C24X0_SDRAM_END 0x40000000
-#define S3C24X0_MEMCTL_BASE 0x48000000
+#define S3C_MEMCTL_BASE 0x48000000
#define S3C2410_USB_HOST_BASE 0x49000000
#define S3C2410_INTERRUPT_BASE 0x4A000000
#define S3C2410_DMA_BASE 0x4B000000
@@ -40,6 +38,17 @@
#define S3C2410_SPI_BASE 0x59000000
#define S3C2410_SDI_BASE 0x5A000000
+/* external IO space */
+#define S3C_CS0_BASE 0x00000000
+#define S3C_CS1_BASE 0x08000000
+#define S3C_CS2_BASE 0x10000000
+#define S3C_CS3_BASE 0x18000000
+#define S3C_CS4_BASE 0x20000000
+#define S3C_CS5_BASE 0x28000000
+#define S3C_CS6_BASE 0x30000000
+
+#define S3C_SDRAM_BASE S3C_CS6_BASE
+#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000)
/*
* if we are booting from NAND, its internal SRAM occures at
@@ -59,21 +68,6 @@
#define S3C_UART3_BASE (S3C_UART_BASE + 0x8000)
#define S3C_UART3_SIZE 0x4000
-/* CS configuration (direct access) */
-#define BWSCON (S3C24X0_MEMCTL_BASE)
-#define BANKCON0 (S3C24X0_MEMCTL_BASE + 0x04)
-#define BANKCON1 (S3C24X0_MEMCTL_BASE + 0x08)
-#define BANKCON2 (S3C24X0_MEMCTL_BASE + 0x0c)
-#define BANKCON3 (S3C24X0_MEMCTL_BASE + 0x10)
-#define BANKCON4 (S3C24X0_MEMCTL_BASE + 0x14)
-#define BANKCON5 (S3C24X0_MEMCTL_BASE + 0x18)
-#define BANKCON6 (S3C24X0_MEMCTL_BASE + 0x1c)
-#define BANKCON7 (S3C24X0_MEMCTL_BASE + 0x20)
-#define REFRESH (S3C24X0_MEMCTL_BASE + 0x24)
-#define BANKSIZE (S3C24X0_MEMCTL_BASE + 0x28)
-#define MRSRB6 (S3C24X0_MEMCTL_BASE + 0x2c)
-#define MRSRB7 (S3C24X0_MEMCTL_BASE + 0x30)
-
/* GPIO registers (direct access) */
#define GPACON (S3C24X0_GPIO_BASE)
#define GPADAT (S3C24X0_GPIO_BASE + 0x04)
@@ -133,12 +127,3 @@
# define DSC0 (S3C24X0_GPIO_BASE + 0xc4)
# define DSC1 (S3C24X0_GPIO_BASE + 0xc8)
#endif
-
-/* external IO space */
-#define CS0_BASE 0x00000000
-#define CS1_BASE 0x08000000
-#define CS2_BASE 0x10000000
-#define CS3_BASE 0x18000000
-#define CS4_BASE 0x20000000
-#define CS5_BASE 0x28000000
-#define CS6_BASE 0x30000000
diff --git a/arch/arm/mach-samsung/lowlevel-init.S b/arch/arm/mach-samsung/lowlevel-init.S
index 93ea3ce..31c6196 100644
--- a/arch/arm/mach-samsung/lowlevel-init.S
+++ b/arch/arm/mach-samsung/lowlevel-init.S
@@ -192,7 +192,7 @@ With m = MDIV + 8, p = PDIV + 2 and s = SDIV.
s3c24x0_sdram_init:
adr r0, SDRAMDATA /* get the current relative address of the table */
- mov r1, #S3C24X0_MEMCTL_BASE
+ mov r1, #S3C_MEMCTL_BASE
mov r2, #6 /* we *know* it contains 6 entries */
ldr r3, [r0], #4 /* write BSWCON first */
@@ -255,7 +255,7 @@ s3c24x0_nand_boot:
* In the case of NOR boot we are running from the same address space.
* Detect this case to handle it correctly.
*/
- mov r1, #S3C24X0_MEMCTL_BASE
+ mov r1, #S3C_MEMCTL_BASE
ldr r3, [r1]
and r3, r3, #0x6
cmp r3, #0x0 /* check for NAND case */
diff --git a/arch/arm/mach-samsung/s3c24xx-clocks.c b/arch/arm/mach-samsung/s3c24xx-clocks.c
index beacc76..a99d1b9 100644
--- a/arch/arm/mach-samsung/s3c24xx-clocks.c
+++ b/arch/arm/mach-samsung/s3c24xx-clocks.c
@@ -21,6 +21,7 @@
#include <mach/s3c-iomap.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-clocks.h>
+#include <mach/s3c-busctl.h>
/**
* Calculate the current M-PLL clock.
@@ -127,9 +128,11 @@ int s3c24xx_dump_clocks(void)
printf("fclk: %7d kHz\n", s3c_get_fclk() / 1000);
printf("hclk: %7d kHz\n", s3c_get_hclk() / 1000);
printf("pclk: %7d kHz\n", s3c_get_pclk() / 1000);
- printf("SDRAM1: CL%d@%dMHz\n", ((readl(BANKCON6) & 0xc) >> 2) + 2, s3c_get_hclk() / 1000000);
- if ((readl(BANKCON7) & (0x3 << 15)) == (0x3 << 15))
- printf("SDRAM2: CL%d@%dMHz\n", ((readl(BANKCON7) & 0xc) >> 2) + 2,
+ printf("SDRAM1: CL%d@%dMHz\n", ((readl(S3C_BANKCON6) & 0xc) >> 2) + 2,
+ s3c_get_hclk() / 1000000);
+ if ((readl(S3C_BANKCON7) & (0x3 << 15)) == (0x3 << 15))
+ printf("SDRAM2: CL%d@%dMHz\n",
+ ((readl(S3C_BANKCON7) & 0xc) >> 2) + 2,
s3c_get_hclk() / 1000000);
return 0;
}
--
1.7.7.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-01-02 11:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-02 11:43 [PATCH v2] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2012-01-02 11:43 ` [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future Juergen Beisert
2012-01-02 11:43 ` [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally Juergen Beisert
2012-01-02 11:43 ` [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates Juergen Beisert
2012-01-02 11:43 ` [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect NAND driver's usage Juergen Beisert
2012-01-02 11:43 ` [PATCH 05/14] MACH SAMSUNG/S3C: Parts of the SDHC driver can be shared in the S3C CPU family Juergen Beisert
2012-01-02 11:43 ` [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for Juergen Beisert
2012-01-02 11:43 ` [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management Juergen Beisert
2012-01-02 11:43 ` [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family Juergen Beisert
2012-01-02 11:43 ` [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for Juergen Beisert
2012-01-02 11:43 ` [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver Juergen Beisert
2012-01-02 11:43 ` [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family Juergen Beisert
2012-01-02 11:44 ` [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs Juergen Beisert
2012-01-02 11:44 ` Juergen Beisert [this message]
2012-01-02 11:44 ` [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs Juergen Beisert
-- strict thread matches above, loose matches on Subject: below --
2011-12-25 20:38 [PATCH] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2011-12-25 20:38 ` [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling Juergen Beisert
2011-11-26 20:22 [RFC] Prepare to add more Samsung S3C CPUs to barebox Juergen Beisert
2011-11-26 20:23 ` [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325504642-9324-14-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox