mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: [PATCH v4 3/5] serial gadget: enable/disable on request
Date: Wed,  4 Jan 2012 10:36:47 +0100	[thread overview]
Message-ID: <1325669809-32637-3-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1325669809-32637-1-git-send-email-eric@eukrea.com>

- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x

Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
v4 : introduce HAVE_OBEX as suggested by Sascha
v3 : fix comment in usbserial.c and add usbserial.h
v2 : always recompile after fixing checkpatch notes ...
 commands/Makefile             |    1 +
 commands/usbserial.c          |  108 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/Kconfig    |    5 +--
 drivers/usb/gadget/f_acm.c    |    4 +-
 drivers/usb/gadget/serial.c   |   48 ++++++++++++++++--
 drivers/usb/gadget/u_serial.c |   22 +++++---
 include/usb/usbserial.h       |   19 +++++++
 7 files changed, 188 insertions(+), 19 deletions(-)
 create mode 100644 commands/usbserial.c
 create mode 100644 include/usb/usbserial.h

diff --git a/commands/Makefile b/commands/Makefile
index 24753be..43630e1 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_CMD_LSMOD)		+= lsmod.o
 obj-$(CONFIG_CMD_INSMOD)	+= insmod.o
 obj-$(CONFIG_CMD_BMP)		+= bmp.o
 obj-$(CONFIG_USB_GADGET_DFU)	+= dfu.o
+obj-$(CONFIG_USB_GADGET_SERIAL)	+= usbserial.o
 obj-$(CONFIG_CMD_GPIO)		+= gpio.o
 obj-$(CONFIG_CMD_UNCOMPRESS)	+= uncompress.o
 obj-$(CONFIG_CMD_I2C)		+= i2c.o
diff --git a/commands/usbserial.c b/commands/usbserial.c
new file mode 100644
index 0000000..eb31934
--- /dev/null
+++ b/commands/usbserial.c
@@ -0,0 +1,108 @@
+/*
+ * usbserial.c - usb serial gadget command
+ *
+ * Copyright (c) 2011 Eric Bénard <eric@eukrea.com>, Eukréa Electromatique
+ * based on dfu.c which is :
+ * Copyright (c) 2009 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <getopt.h>
+#include <fs.h>
+#include <xfuncs.h>
+#include <usb/usbserial.h>
+
+static int do_usbserial(struct command *cmdtp, int argc, char *argv[])
+{
+	int opt;
+	struct usb_serial_pdata pdata;
+	char *argstr;
+	char *manufacturer = "barebox";
+	char *productname = CONFIG_BOARDINFO;
+	u16 idVendor = 0, idProduct = 0;
+	int mode = 0;
+
+	while ((opt = getopt(argc, argv, "m:p:V:P:asd")) > 0) {
+		switch (opt) {
+		case 'm':
+			manufacturer = optarg;
+			break;
+		case 'p':
+			productname = optarg;
+			break;
+		case 'V':
+			idVendor = simple_strtoul(optarg, NULL, 0);
+			break;
+		case 'P':
+			idProduct = simple_strtoul(optarg, NULL, 0);
+			break;
+		case 'a':
+			mode = 0;
+			break;
+#ifdef HAVE_OBEX
+		case 'o':
+			mode = 1;
+			break;
+#endif
+		case 's':
+			mode = 2;
+			break;
+		case 'd':
+			usb_serial_unregister();
+			return 0;
+		}
+	}
+
+	argstr = argv[optind];
+
+	pdata.manufacturer = manufacturer;
+	pdata.productname = productname;
+	pdata.idVendor = idVendor;
+	pdata.idProduct = idProduct;
+	pdata.mode = mode;
+
+	return usb_serial_register(&pdata);
+}
+
+BAREBOX_CMD_HELP_START(usbserial)
+BAREBOX_CMD_HELP_USAGE("usbserial [OPTIONS] <description>\n")
+BAREBOX_CMD_HELP_SHORT("Enable/disable a serial gadget on the USB device interface.\n")
+BAREBOX_CMD_HELP_OPT  ("-m <str>",  "Manufacturer string (barebox)\n")
+BAREBOX_CMD_HELP_OPT  ("-p <str>",  "product string (" CONFIG_BOARDINFO ")\n")
+BAREBOX_CMD_HELP_OPT  ("-V <id>",   "vendor id\n")
+BAREBOX_CMD_HELP_OPT  ("-P <id>",   "product id\n")
+BAREBOX_CMD_HELP_OPT  ("-a",   "CDC ACM (default)\n")
+#ifdef HAVE_OBEX
+BAREBOX_CMD_HELP_OPT  ("-o",   "CDC OBEX\n")
+#endif
+BAREBOX_CMD_HELP_OPT  ("-s",   "Generic Serial\n")
+BAREBOX_CMD_HELP_OPT  ("-d",   "Disable the serial gadget\n")
+BAREBOX_CMD_HELP_END
+
+/**
+ * @page usbserial_command
+ */
+
+BAREBOX_CMD_START(usbserial)
+	.cmd		= do_usbserial,
+	.usage		= "Serial gadget enable/disable",
+	BAREBOX_CMD_HELP(cmd_usbserial_help)
+BAREBOX_CMD_END
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index fd471c0..797d19f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -30,8 +30,7 @@ config USB_GADGET_DRIVER_PXA27X
 	select POLLER
 endchoice
 
-choice
-	prompt "USB Gadget drivers"
+comment "USB Gadget drivers"
 
 config USB_GADGET_DFU
 	bool
@@ -42,7 +41,5 @@ config USB_GADGET_SERIAL
 	depends on EXPERIMENTAL
 	prompt "Serial Gadget"
 
-endchoice
-
 endif
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 43b4992..218aed2 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -407,7 +407,7 @@ static void acm_disable(struct usb_function *f)
 {
 	struct f_acm	*acm = func_to_acm(f);
 
-	printf("acm ttyGS%d deactivated\n", acm->port_num);
+	VDBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
 	gserial_disconnect(&acm->port);
 	usb_ep_disable(acm->notify);
 	acm->notify->driver_data = NULL;
@@ -473,7 +473,7 @@ static int acm_notify_serial_state(struct f_acm *acm)
 	int			status;
 
 	if (acm->notify_req) {
-		printf("acm ttyGS%d serial state %04x\n",
+		VDBG(cdev, "acm ttyGS%d serial state %04x\n",
 				acm->port_num, acm->serial_state);
 		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
 				0, &acm->serial_state, sizeof(acm->serial_state));
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 8ba9ab5..98a501b 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -4,6 +4,7 @@
 #include <usb/ch9.h>
 #include <usb/gadget.h>
 #include <usb/composite.h>
+#include <usb/usbserial.h>
 #include <asm/byteorder.h>
 
 #include "u_serial.h"
@@ -52,7 +53,9 @@ static struct usb_gadget_strings *dev_strings[] = {
 };
 
 static int use_acm = 1;
+#ifdef HAVE_OBEX
 static int use_obex = 0;
+#endif
 static unsigned n_ports = 1;
 
 static int serial_bind_config(struct usb_configuration *c)
@@ -63,8 +66,10 @@ static int serial_bind_config(struct usb_configuration *c)
 	for (i = 0; i < n_ports && status == 0; i++) {
 		if (use_acm)
 			status = acm_bind_config(c, i);
+#ifdef HAVE_OBEX
 		else if (use_obex)
 			status = obex_bind_config(c, i);
+#endif
 		else
 			status = gser_bind_config(c, i);
 	}
@@ -100,7 +105,7 @@ static int gs_bind(struct usb_composite_dev *cdev)
 	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
-printf("%s\n", __func__);
+
 	status = gserial_setup(cdev->gadget, n_ports);
 	if (status < 0)
 		return status;
@@ -174,7 +179,7 @@ static struct usb_composite_driver gserial_driver = {
 	.bind		= gs_bind,
 };
 
-static int __init gserial_init(void)
+int usb_serial_register(struct usb_serial_pdata *pdata)
 {
 	/* We *could* export two configs; that'd be much cleaner...
 	 * but neither of these product IDs was defined that way.
@@ -187,19 +192,43 @@ static int __init gserial_init(void)
 #ifdef CONFIG_ARCH_PXA2XX
 	use_acm = 0;
 #endif
+	switch (pdata->mode) {
+	case 1:
+#ifdef HAVE_OBEX
+		use_obex = 1;
+#endif
+		use_acm = 0;
+		break;
+	case 2:
+#ifdef HAVE_OBEX
+		use_obex = 1;
+#endif
+		use_acm = 0;
+		break;
+	default:
+#ifdef HAVE_OBEX
+		use_obex = 0;
+#endif
+		use_acm = 1;
+	}
+
 	if (use_acm) {
 		serial_config_driver.label = "CDC ACM config";
 		serial_config_driver.bConfigurationValue = 2;
 		device_desc.bDeviceClass = USB_CLASS_COMM;
 		device_desc.idProduct =
 				cpu_to_le16(GS_CDC_PRODUCT_ID);
-	} else if (use_obex) {
+	}
+#ifdef HAVE_OBEX
+	else if (use_obex) {
 		serial_config_driver.label = "CDC OBEX config";
 		serial_config_driver.bConfigurationValue = 3;
 		device_desc.bDeviceClass = USB_CLASS_COMM;
 		device_desc.idProduct =
 			cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
-	} else {
+	}
+#endif
+	else {
 		serial_config_driver.label = "Generic Serial config";
 		serial_config_driver.bConfigurationValue = 1;
 		device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
@@ -207,8 +236,17 @@ static int __init gserial_init(void)
 				cpu_to_le16(GS_PRODUCT_ID);
 	}
 	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
+	if (pdata->idVendor)
+		device_desc.idVendor = pdata->idVendor;
+	if (pdata->idProduct)
+		device_desc.idProduct = pdata->idProduct;
+	strings_dev[STRING_MANUFACTURER_IDX].s = pdata->manufacturer;
+	strings_dev[STRING_PRODUCT_IDX].s = pdata->productname;
 
 	return usb_composite_register(&gserial_driver);
 }
 
-late_initcall(gserial_init);
+void usb_serial_unregister(void)
+{
+	usb_composite_unregister(&gserial_driver);
+}
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 49aedc2..e310c3a 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -20,6 +20,7 @@
 #include <common.h>
 #include <usb/cdc.h>
 #include <kfifo.h>
+#include <clock.h>
 
 #include "u_serial.h"
 
@@ -107,8 +108,6 @@ static unsigned	n_ports;
 
 #define GS_CLOSE_TIMEOUT		15		/* seconds */
 
-
-
 #ifdef VERBOSE_DEBUG
 #define pr_vdebug(fmt, arg...) \
 	pr_debug(fmt, ##arg)
@@ -370,6 +369,7 @@ static void serial_putc(struct console_device *cdev, char c)
 	struct usb_ep		*in;
 	struct usb_request	*req;
 	int status;
+	uint64_t to;
 
 	if (list_empty(pool))
 		return;
@@ -382,8 +382,12 @@ static void serial_putc(struct console_device *cdev, char c)
 	*(unsigned char *)req->buf = c;
 	status = usb_ep_queue(in, req);
 
-	while (status >= 0 && list_empty(pool))
+	to = get_time_ns();
+	while (status >= 0 && list_empty(pool)) {
 		status = usb_gadget_poll();
+		if (is_timeout(to, 300 * MSECOND))
+			break;
+	}
 }
 
 static int serial_tstc(struct console_device *cdev)
@@ -399,11 +403,16 @@ static int serial_getc(struct console_device *cdev)
 	struct gs_port	*port = container_of(cdev,
 					struct gs_port, cdev);
 	unsigned char ch;
+	uint64_t to;
 
 	if (!port->port_usb)
 		return -EIO;
-	while (kfifo_getc(port->recv_fifo, &ch))
+	to = get_time_ns();
+	while (kfifo_getc(port->recv_fifo, &ch)) {
 		usb_gadget_poll();
+		if (is_timeout(to, 300 * MSECOND))
+			break;
+	}
 
 	return ch;
 }
@@ -420,8 +429,6 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 	int		status;
 	struct console_device *cdev;
 
-	printf("%s %p %d\n", __func__, gser, port_num);
-
 	/* we "know" gserial_cleanup() hasn't been called */
 	port = ports[port_num].port;
 
@@ -451,7 +458,7 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 
 	port->recv_fifo = kfifo_alloc(1024);
 
-	printf("gserial_connect: start ttyGS%d\n", port->port_num);
+	/*printf("gserial_connect: start ttyGS%d\n", port->port_num);*/
 	gs_start_io(port);
 	if (gser->connect)
 		gser->connect(gser);
@@ -508,7 +515,6 @@ void gserial_disconnect(struct gserial *gser)
 	struct gs_port	*port = gser->ioport;
 	struct console_device *cdev;
 
-	printf("%s\n", __func__);
 	if (!port)
 		return;
 
diff --git a/include/usb/usbserial.h b/include/usb/usbserial.h
new file mode 100644
index 0000000..43c839c
--- /dev/null
+++ b/include/usb/usbserial.h
@@ -0,0 +1,19 @@
+#ifndef _USB_SERIAL_H
+#define _USB_SERIAL_H
+
+struct usb_serial_pdata {
+	char		*manufacturer;
+	char		*productname;
+	u16			idVendor;
+	u16			idProduct;
+	int			mode;
+};
+
+int usb_serial_register(struct usb_serial_pdata *pdata);
+void usb_serial_unregister(void);
+
+/* OBEX support is missing in barebox */
+/* #define HAVE_OBEX */
+
+#endif /* _USB_SERIAL_H */
+
-- 
1.7.7.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-01-04  9:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-04  9:36 [PATCH v4 1/5] fsl_udc: update and fix Eric Bénard
2012-01-04  9:36 ` [PATCH v4 2/5] dfu: fill bwPollTimeout and better handle detach Eric Bénard
2012-01-04  9:36 ` Eric Bénard [this message]
2012-01-04  9:36 ` [PATCH v4 4/5] timeout: add poller_call Eric Bénard
2012-01-04 10:47   ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 11:10     ` Eric Bénard
2012-01-04 11:44       ` Jean-Christophe PLAGNIOL-VILLARD
2012-01-04 13:32         ` Eric Bénard
2012-01-04 15:31     ` Eric Bénard
2012-01-04  9:36 ` [PATCH v4 5/5] eukrea_cpuimx35: fix compilation when CONFIG_USB_GADGET is enabled Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325669809-32637-3-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox