mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] at91: add spi device ressources
Date: Thu,  5 Jan 2012 14:40:49 +0100	[thread overview]
Message-ID: <1325770850-11776-1-git-send-email-plagnioj@jcrosoft.com> (raw)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91rm9200_devices.c  |   32 +++++++++++++++++++++
 arch/arm/mach-at91/at91sam9260_devices.c |   44 +++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9261_devices.c |   44 +++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9263_devices.c |   45 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c |   21 ++++++-------
 5 files changed, 175 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 68bcffc..1fc78ab 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -154,6 +154,38 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+	int i;
+	int cs_pin;
+
+	BUG_ON(spi_id > 0);
+
+	for (i = 0; i < pdata->num_chipselect; i++) {
+		cs_pin = pdata->chipselect[i];
+
+		/* enable chip-select pin */
+		if (cs_pin > 0)
+			at91_set_gpio_output(cs_pin, 1);
+	}
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
+
+	add_generic_device("atmel_spi", spi_id, NULL, AT91RM9200_BASE_SPI,
+			   SZ_16K, IORESOURCE_MEM, pdata);
+}
+#else
+void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  UART
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 8e8ea3b..695a3ee 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -150,6 +150,50 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+	int i;
+	int cs_pin;
+	resource_size_t start = ~0;
+
+	BUG_ON(spi_id > 1);
+
+	for (i = 0; i < pdata->num_chipselect; i++) {
+		cs_pin = pdata->chipselect[i];
+
+		/* enable chip-select pin */
+		if (cs_pin > 0)
+			at91_set_gpio_output(cs_pin, 1);
+	}
+
+	/* Configure SPI bus(es) */
+	switch (spi_id) {
+	case 0:
+		start = AT91SAM9260_BASE_SPI0;
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+		break;
+	case 1:
+		start = AT91SAM9260_BASE_SPI1;
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
+		break;
+	}
+
+	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, pdata);
+}
+#else
+void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
 static inline void configure_dbgu_pins(void)
 {
 	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ff7a938..3f55e2e 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -102,6 +102,50 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+	int i;
+	int cs_pin;
+	resource_size_t start = ~0;
+
+	BUG_ON(spi_id > 1);
+
+	for (i = 0; i < pdata->num_chipselect; i++) {
+		cs_pin = pdata->chipselect[i];
+
+		/* enable chip-select pin */
+		if (cs_pin > 0)
+			at91_set_gpio_output(cs_pin, 1);
+	}
+
+	/* Configure SPI bus(es) */
+	switch (spi_id) {
+	case 0:
+		start = AT91SAM9261_BASE_SPI0;
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+		break;
+	case 1:
+		start = AT91SAM9213_BASE_SPI1;
+		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
+		break;
+	}
+
+	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, pdata);
+}
+#else
+void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
 static inline void configure_dbgu_pins(void)
 {
 	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index d447e24..ce6221d 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -152,6 +152,50 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 void at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_SPI_ATMEL)
+void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
+{
+	int i;
+	int cs_pin;
+	resource_size_t start = ~0;
+
+	BUG_ON(spi_id > 1);
+
+	for (i = 0; i < pdata->num_chipselect; i++) {
+		cs_pin = pdata->chipselect[i];
+
+		/* enable chip-select pin */
+		if (cs_pin > 0)
+			at91_set_gpio_output(cs_pin, 1);
+	}
+
+	/* Configure SPI bus(es) */
+	switch (spi_id) {
+	case 0:
+		start = AT91SAM9263_BASE_SPI0;
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+		break;
+	case 1:
+		start = AT91SAM9263_BASE_SPI1;
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+		break;
+	}
+
+	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, pdata);
+}
+#else
+void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
+#endif
+
 static inline void configure_dbgu_pins(void)
 {
 	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
@@ -284,3 +328,4 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
 #else
 void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
 #endif
+
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 5f1a45a..d087e1f 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -299,7 +299,9 @@ void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
 {
 	int i;
 	int cs_pin;
-	resource_size_t start;
+	resource_size_t start = ~0;
+
+	BUG_ON(spi_id > 1);
 
 	for (i = 0; i < pdata->num_chipselect; i++) {
 		cs_pin = pdata->chipselect[i];
@@ -310,27 +312,24 @@ void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
 	}
 
 	/* Configure SPI bus(es) */
-	if (spi_id == 0) {
+	switch (spi_id) {
+	case 0:
 		start = AT91SAM9G45_BASE_SPI0;
 		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
-
-		add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
-			   IORESOURCE_MEM, pdata);
-	}
-
-	else if (spi_id == 1) {
+		break;
+	case 1:
 		start = AT91SAM9G45_BASE_SPI1;
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
 		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+		break;
+	}
 
-		add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
+	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
 			   IORESOURCE_MEM, pdata);
-	}
 }
-
 #else
 void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
 #endif
-- 
1.7.7


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2012-01-05 13:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-05 13:40 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-01-05 13:40 ` [PATCH 2/2] at91: add default spi chipselect ressources Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325770850-11776-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox