mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] Add TQ tqma53 support
@ 2012-02-13 10:40 Sascha Hauer
  2012-02-13 10:40 ` [PATCH 1/3] ARM: update mach-types Sascha Hauer
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-02-13 10:40 UTC (permalink / raw)
  To: barebox


The following series adds support for the TQ tqma53 module with a
Freescale i.MX53 SoC. To do this mach-types has to be updated and
also we need a possibility to run the i.MX53 at 800MHz.

Sascha Hauer (3):
      ARM: update mach-types
      ARM i.MX5: Allow to pass cpu clock to lowlevel init
      initial tqm53 support

 arch/arm/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-loco/board.c |    2 +-
 arch/arm/boards/freescale-mx53-smd/board.c  |    2 +-
 arch/arm/boards/tqma53/Makefile             |    2 +
 arch/arm/boards/tqma53/board.c              |  272 +++++++++++++++++++++++++++
 arch/arm/boards/tqma53/config.h             |    4 +
 arch/arm/boards/tqma53/env/config           |   43 +++++
 arch/arm/boards/tqma53/flash_header.c       |  109 +++++++++++
 arch/arm/configs/tqma53_defconfig           |   64 +++++++
 arch/arm/mach-imx/Kconfig                   |   11 +
 arch/arm/mach-imx/imx53.c                   |    9 +-
 arch/arm/mach-imx/include/mach/imx5.h       |    2 +-
 arch/arm/tools/mach-types                   |   62 ++++++-
 13 files changed, 577 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boards/tqma53/Makefile
 create mode 100644 arch/arm/boards/tqma53/board.c
 create mode 100644 arch/arm/boards/tqma53/config.h
 create mode 100644 arch/arm/boards/tqma53/env/config
 create mode 100644 arch/arm/boards/tqma53/flash_header.c
 create mode 100644 arch/arm/configs/tqma53_defconfig

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH 1/3] ARM: update mach-types
  2012-02-13 10:40 [PATCH] Add TQ tqma53 support Sascha Hauer
@ 2012-02-13 10:40 ` Sascha Hauer
  2012-02-13 10:40 ` [PATCH 2/3] ARM i.MX5: Allow to pass cpu clock to lowlevel init Sascha Hauer
  2012-02-13 10:40 ` [PATCH 3/3] initial tqm53 support Sascha Hauer
  2 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-02-13 10:40 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/tools/mach-types |   62 ++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 61 insertions(+), 1 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 38e901d..ff97af4 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jan 5 07:57:22 2012
+# Last update: Thu Feb 9 12:00:12 2012
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -3903,3 +3903,63 @@ apq8064_cdp		MACH_APQ8064_CDP	APQ8064_CDP		3948
 apq8064_mtp		MACH_APQ8064_MTP	APQ8064_MTP		3949
 apq8064_fluid		MACH_APQ8064_FLUID	APQ8064_FLUID		3950
 apq8064_liquid		MACH_APQ8064_LIQUID	APQ8064_LIQUID		3951
+mango210		MACH_MANGO210		MANGO210		3952
+mango100		MACH_MANGO100		MANGO100		3953
+mango24			MACH_MANGO24		MANGO24			3954
+mango64			MACH_MANGO64		MANGO64			3955
+nsa320			MACH_NSA320		NSA320			3956
+elv_ccu2		MACH_ELV_CCU2		ELV_CCU2		3957
+triton_x00		MACH_TRITON_X00		TRITON_X00		3958
+triton_1500_2000	MACH_TRITON_1500_2000	TRITON_1500_2000	3959
+pogoplugv4		MACH_POGOPLUGV4		POGOPLUGV4		3960
+venus_cl		MACH_VENUS_CL		VENUS_CL		3961
+vulcano_g20		MACH_VULCANO_G20	VULCANO_G20		3962
+sgs_i9100		MACH_SGS_I9100		SGS_I9100		3963
+stsv2			MACH_STSV2		STSV2			3964
+csb1724			MACH_CSB1724		CSB1724			3965
+omapl138_lcdk		MACH_OMAPL138_LCDK	OMAPL138_LCDK		3966
+jel_dd			MACH_JEWEL_DD		JEWEL_DD		3967
+pvd_mx25		MACH_PVD_MX25		PVD_MX25		3968
+meson6_skt		MACH_MESON6_SKT		MESON6_SKT		3969
+meson6_ref		MACH_MESON6_REF		MESON6_REF		3970
+pxm			MACH_PXM		PXM			3971
+stuttgart		MACH_S3			S3			3972
+pogoplugv3		MACH_POGOPLUGV3		POGOPLUGV3		3973
+mlp89626		MACH_MLP89626		MLP89626		3974
+iomegahmndce		MACH_IOMEGAHMNDCE	IOMEGAHMNDCE		3975
+pogoplugv3pci		MACH_POGOPLUGV3PCI	POGOPLUGV3PCI		3976
+bntv250			MACH_BNTV250		BNTV250			3977
+mx53_qseven		MACH_MX53_QSEVEN	MX53_QSEVEN		3978
+gtl_it1100		MACH_GTL_IT1100		GTL_IT1100		3979
+mx6q_sabresd		MACH_MX6Q_SABRESD	MX6Q_SABRESD		3980
+mt4			MACH_MT4		MT4			3981
+jumbo_d			MACH_JUMBO_D		JUMBO_D			3982
+jumbo_i			MACH_JUMBO_I		JUMBO_I			3983
+fs20_dmp		MACH_FS20_DMP		FS20_DMP		3984
+dns320			MACH_DNS320		DNS320			3985
+mx28bacos		MACH_MX28BACOS		MX28BACOS		3986
+tl80			MACH_TL80		TL80			3987
+polatis_nic_1001	MACH_POLATIS_NIC_1001	POLATIS_NIC_1001	3988
+tely			MACH_TELY		TELY			3989
+u8520			MACH_U8520		U8520			3990
+manta			MACH_MANTA		MANTA			3991
+spear1340_lcad		MACH_SPEAR_EM_S900	SPEAR_EM_S900		3992
+mpq8064_cdp		MACH_MPQ8064_CDP	MPQ8064_CDP		3993
+mpq8064_stb		MACH_MPQ8064_STB	MPQ8064_STB		3994
+mpq8064_dtv		MACH_MPQ8064_DTV	MPQ8064_DTV		3995
+dm368som		MACH_DM368SOM		DM368SOM		3996
+gprisb2			MACH_GPRISB2		GPRISB2			3997
+chammid			MACH_CHAMMID		CHAMMID			3998
+seoul2			MACH_SEOUL2		SEOUL2			3999
+omap4_nooktablet	MACH_OMAP4_NOOKTABLET	OMAP4_NOOKTABLET	4000
+aalto			MACH_AALTO		AALTO			4001
+metro			MACH_METRO		METRO			4002
+cydm3730		MACH_CYDM3730		CYDM3730		4003
+tqma53			MACH_TQMA53		TQMA53			4004
+msm7627a_qrd3		MACH_MSM7627A_QRD3	MSM7627A_QRD3		4005
+mx28_canby		MACH_MX28_CANBY		MX28_CANBY		4006
+tiger			MACH_TIGER		TIGER			4007
+pcats_9307_type_a	MACH_PCATS_9307_TYPE_A	PCATS_9307_TYPE_A	4008
+pcats_9307_type_o	MACH_PCATS_9307_TYPE_O	PCATS_9307_TYPE_O	4009
+pcats_9307_type_r	MACH_PCATS_9307_TYPE_R	PCATS_9307_TYPE_R	4010
+streamplug		MACH_STREAMPLUG		STREAMPLUG		4011
-- 
1.7.9


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH 2/3] ARM i.MX5: Allow to pass cpu clock to lowlevel init
  2012-02-13 10:40 [PATCH] Add TQ tqma53 support Sascha Hauer
  2012-02-13 10:40 ` [PATCH 1/3] ARM: update mach-types Sascha Hauer
@ 2012-02-13 10:40 ` Sascha Hauer
  2012-02-13 10:40 ` [PATCH 3/3] initial tqm53 support Sascha Hauer
  2 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-02-13 10:40 UTC (permalink / raw)
  To: barebox

Some variants of the i.MX53 do not allow to run at 1GHz, so
pass a cpu frequency parameter to the lowlevel init function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/freescale-mx53-loco/board.c |    2 +-
 arch/arm/boards/freescale-mx53-smd/board.c  |    2 +-
 arch/arm/mach-imx/imx53.c                   |    9 +++++++--
 arch/arm/mach-imx/include/mach/imx5.h       |    2 +-
 4 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
index fa3a409..dc930b6 100644
--- a/arch/arm/boards/freescale-mx53-loco/board.c
+++ b/arch/arm/boards/freescale-mx53-loco/board.c
@@ -155,7 +155,7 @@ static int loco_console_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(loco_pads, ARRAY_SIZE(loco_pads));
 
-	imx53_init_lowlevel();
+	imx53_init_lowlevel(1000);
 
 	imx53_add_uart0();
 	return 0;
diff --git a/arch/arm/boards/freescale-mx53-smd/board.c b/arch/arm/boards/freescale-mx53-smd/board.c
index e7aa419..a7259ba 100644
--- a/arch/arm/boards/freescale-mx53-smd/board.c
+++ b/arch/arm/boards/freescale-mx53-smd/board.c
@@ -160,7 +160,7 @@ static int smd_console_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(smd_pads, ARRAY_SIZE(smd_pads));
 
-	imx53_init_lowlevel();
+	imx53_init_lowlevel(1000);
 
 	imx53_add_uart0();
 	imx53_add_uart1();
diff --git a/arch/arm/mach-imx/imx53.c b/arch/arm/mach-imx/imx53.c
index 2fb18e7..4f7d1cb 100644
--- a/arch/arm/mach-imx/imx53.c
+++ b/arch/arm/mach-imx/imx53.c
@@ -47,11 +47,12 @@ static int imx53_init(void)
 coredevice_initcall(imx53_init);
 
 #define setup_pll_1000(base)	imx5_setup_pll((base), 1000, ((10 << 4) + ((1 - 1) << 0)), (12 - 1), 5)
+#define setup_pll_800(base)	imx5_setup_pll((base), 800, ((8 << 4) + ((1 - 1) << 0)), (3 - 1), 1)
 #define setup_pll_400(base)	imx5_setup_pll((base), 400, ((8 << 4) + ((2 - 1)  << 0)), (3 - 1), 1)
 #define setup_pll_455(base)	imx5_setup_pll((base), 455, ((9 << 4) + ((2 - 1)  << 0)), (48 - 1), 23)
 #define setup_pll_216(base)	imx5_setup_pll((base), 216, ((8 << 4) + ((2 - 1)  << 0)), (1 - 1), 1)
 
-void imx53_init_lowlevel(void)
+void imx53_init_lowlevel(unsigned int cpufreq_mhz)
 {
 	void __iomem *ccm = (void __iomem *)MX53_CCM_BASE_ADDR;
 	u32 r;
@@ -82,7 +83,11 @@ void imx53_init_lowlevel(void)
 	/* Switch ARM to step clock */
 	writel(0x4, ccm + MX5_CCM_CCSR);
 
-	setup_pll_1000((void __iomem *)MX53_PLL1_BASE_ADDR);
+	if (cpufreq_mhz == 1000)
+		setup_pll_1000((void __iomem *)MX53_PLL1_BASE_ADDR);
+	else
+		setup_pll_800((void __iomem *)MX53_PLL1_BASE_ADDR);
+
 	setup_pll_400((void __iomem *)MX53_PLL3_BASE_ADDR);
 
         /* Switch peripheral to PLL3 */
diff --git a/arch/arm/mach-imx/include/mach/imx5.h b/arch/arm/mach-imx/include/mach/imx5.h
index 0491179..c33f75e 100644
--- a/arch/arm/mach-imx/include/mach/imx5.h
+++ b/arch/arm/mach-imx/include/mach/imx5.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_MX5_H
 #define __MACH_MX5_H
 
-void imx53_init_lowlevel(void);
+void imx53_init_lowlevel(unsigned int cpufreq_mhz);
 void imx51_init_lowlevel(void);
 void imx5_setup_pll(void __iomem *base, int freq, u32 op, u32 mfd, u32 mfn);
 void imx5_init_lowlevel(void);
-- 
1.7.9


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH 3/3] initial tqm53 support
  2012-02-13 10:40 [PATCH] Add TQ tqma53 support Sascha Hauer
  2012-02-13 10:40 ` [PATCH 1/3] ARM: update mach-types Sascha Hauer
  2012-02-13 10:40 ` [PATCH 2/3] ARM i.MX5: Allow to pass cpu clock to lowlevel init Sascha Hauer
@ 2012-02-13 10:40 ` Sascha Hauer
  2 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2012-02-13 10:40 UTC (permalink / raw)
  To: barebox

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                     |    1 +
 arch/arm/boards/tqma53/Makefile       |    2 +
 arch/arm/boards/tqma53/board.c        |  272 +++++++++++++++++++++++++++++++++
 arch/arm/boards/tqma53/config.h       |    4 +
 arch/arm/boards/tqma53/env/config     |   43 +++++
 arch/arm/boards/tqma53/flash_header.c |  109 +++++++++++++
 arch/arm/configs/tqma53_defconfig     |   64 ++++++++
 arch/arm/mach-imx/Kconfig             |   11 ++
 8 files changed, 506 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/tqma53/Makefile
 create mode 100644 arch/arm/boards/tqma53/board.c
 create mode 100644 arch/arm/boards/tqma53/config.h
 create mode 100644 arch/arm/boards/tqma53/env/config
 create mode 100644 arch/arm/boards/tqma53/flash_header.c
 create mode 100644 arch/arm/configs/tqma53_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5d7c344..9926280 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -119,6 +119,7 @@ board-$(CONFIG_MACH_USB_A9263)			:= usb-a926x
 board-$(CONFIG_MACH_USB_A9G20)			:= usb-a926x
 board-$(CONFIG_MACH_VERSATILEPB)		:= versatile
 board-$(CONFIG_MACH_TX25)			:= karo-tx25
+board-$(CONFIG_MACH_TQMA53)			:= tqma53
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 
diff --git a/arch/arm/boards/tqma53/Makefile b/arch/arm/boards/tqma53/Makefile
new file mode 100644
index 0000000..b56ce7f
--- /dev/null
+++ b/arch/arm/boards/tqma53/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+obj-y += flash_header.o
diff --git a/arch/arm/boards/tqma53/board.c b/arch/arm/boards/tqma53/board.c
new file mode 100644
index 0000000..020eb68
--- /dev/null
+++ b/arch/arm/boards/tqma53/board.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <environment.h>
+#include <fcntl.h>
+#include <fec.h>
+#include <fs.h>
+#include <init.h>
+#include <nand.h>
+#include <net.h>
+#include <partition.h>
+#include <sizes.h>
+#include <mci.h>
+#include <io.h>
+
+#include <asm/armlinux.h>
+#include <asm/mmu.h>
+#include <generated/mach-types.h>
+
+#include <mach/imx-regs.h>
+#include <mach/iomux-mx53.h>
+#include <mach/devices-imx53.h>
+#include <mach/generic.h>
+#include <mach/gpio.h>
+#include <mach/imx-nand.h>
+#include <mach/iim.h>
+#include <mach/imx5.h>
+
+static struct fec_platform_data fec_info = {
+	.xcv_type = RMII,
+};
+
+static struct pad_desc tqma53_pads[] = {
+	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
+	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
+	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
+	MX53_PAD_KEY_ROW2__CAN1_RXCAN,
+	MX53_PAD_KEY_COL2__CAN1_TXCAN,
+	MX53_PAD_KEY_ROW4__CAN2_RXCAN,
+	MX53_PAD_KEY_COL4__CAN2_TXCAN,
+	MX53_PAD_GPIO_19__CCM_CLKO,
+	MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK,
+	MX53_PAD_SD1_DATA0__CSPI_MISO,
+	MX53_PAD_SD1_CMD__CSPI_MOSI,
+	MX53_PAD_SD1_CLK__CSPI_SCLK,
+	MX53_PAD_SD1_DATA1__CSPI_SS0,
+	MX53_PAD_SD1_DATA2__CSPI_SS1,
+	MX53_PAD_SD1_DATA3__CSPI_SS2,
+	MX53_PAD_EIM_D17__ECSPI1_MISO,
+	MX53_PAD_EIM_D18__ECSPI1_MOSI,
+	MX53_PAD_EIM_D16__ECSPI1_SCLK,
+	MX53_PAD_EIM_EB2__ECSPI1_SS0,
+	MX53_PAD_EIM_D19__ECSPI1_SS1,
+	MX53_PAD_EIM_D24__ECSPI1_SS2,
+	MX53_PAD_EIM_D25__ECSPI1_SS3,
+	MX53_PAD_GPIO_4__ESDHC2_CD,
+	MX53_PAD_SD2_CLK__ESDHC2_CLK,
+	MX53_PAD_SD2_CMD__ESDHC2_CMD,
+	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
+	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
+	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
+	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
+	MX53_PAD_GPIO_2__ESDHC2_WP,
+	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
+	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
+	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
+	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
+	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
+	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
+	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
+	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
+	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
+	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
+	MX53_PAD_FEC_MDC__FEC_MDC,
+	MX53_PAD_FEC_MDIO__FEC_MDIO,
+	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
+	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
+	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX53_PAD_GPIO_7__FIRI_RXD,
+	MX53_PAD_GPIO_8__FIRI_TXD,
+	MX53_PAD_GPIO_0__GPIO1_0,
+	MX53_PAD_GPIO_3__GPIO1_3,
+	MX53_PAD_PATA_DATA14__GPIO2_14,
+	MX53_PAD_PATA_DATA15__GPIO2_15,
+	MX53_PAD_EIM_CS0__GPIO2_23,
+	MX53_PAD_EIM_OE__GPIO2_25,
+	MX53_PAD_EIM_RW__GPIO2_26,
+	MX53_PAD_EIM_LBA__GPIO2_27,
+	MX53_PAD_PATA_DATA5__GPIO2_5,
+	MX53_PAD_PATA_DATA6__GPIO2_6,
+	MX53_PAD_PATA_DATA7__GPIO2_7,
+	MX53_PAD_EIM_DA11__GPIO3_11,
+	MX53_PAD_EIM_DA12__GPIO3_12,
+	MX53_PAD_EIM_DA13__GPIO3_13,
+	MX53_PAD_EIM_DA14__GPIO3_14,
+	MX53_PAD_EIM_D20__GPIO3_20,
+	MX53_PAD_EIM_D21__GPIO3_21,
+	MX53_PAD_EIM_D22__GPIO3_22,
+	MX53_PAD_EIM_D28__GPIO3_28,
+	MX53_PAD_EIM_D29__GPIO3_29,
+	MX53_PAD_EIM_WAIT__GPIO5_0,
+	MX53_PAD_PATA_DA_1__GPIO7_7,
+	MX53_PAD_PATA_DA_2__GPIO7_8,
+	MX53_PAD_KEY_COL3__I2C2_SCL,
+	MX53_PAD_KEY_ROW3__I2C2_SDA,
+	MX53_PAD_GPIO_5__I2C3_SCL,
+	MX53_PAD_GPIO_6__I2C3_SDA,
+	MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10,
+	MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11,
+	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
+	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
+	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
+	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
+	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
+	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
+	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
+	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
+	MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4,
+	MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5,
+	MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6,
+	MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7,
+	MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8,
+	MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9,
+	MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN,
+	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
+	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
+	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
+	MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
+	MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
+	MX53_PAD_EIM_D23__IPU_DI1_PIN2,
+	MX53_PAD_EIM_EB3__IPU_DI1_PIN3,
+	MX53_PAD_EIM_DA15__IPU_DI1_PIN4,
+	MX53_PAD_EIM_CS1__IPU_DI1_PIN6,
+	MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
+	MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
+	MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
+	MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
+	MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
+	MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
+	MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
+	MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
+	MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
+	MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
+	MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
+	MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
+	MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
+	MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
+	MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
+	MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
+	MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
+	MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
+	MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
+	MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
+	MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
+	MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
+	MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
+	MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
+	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
+	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
+	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
+	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
+	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
+	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
+	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
+	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
+	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
+	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
+	MX53_PAD_GPIO_18__OWIRE_LINE,
+	MX53_PAD_GPIO_1__PWM2_PWMO,
+	MX53_PAD_GPIO_16__SPDIF_IN1,
+	MX53_PAD_GPIO_17__SPDIF_OUT1,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_INTRQ__UART2_CTS,
+	MX53_PAD_PATA_DIOR__UART2_RTS,
+	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
+	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
+
+	/* SD2 card detect */
+	MX53_PAD_GPIO_4__GPIO1_4,
+	/* SD2 write protect */
+	MX53_PAD_GPIO_2__GPIO1_2,
+	/* phy reset */
+	MX53_PAD_PATA_DA_0__GPIO7_6,
+};
+
+#define GPIO_FEC_NRESET	IMX_GPIO_NR(7, 6)
+
+static int tqma53_mem_init(void)
+{
+	arm_add_mem_device("ram0", 0x70000000, SZ_512M);
+#ifdef CONFIG_MACH_TQMA53_1GB_RAM
+	arm_add_mem_device("ram1", 0xb0000000, SZ_512M);
+#endif
+
+	return 0;
+}
+mem_initcall(tqma53_mem_init);
+
+#define GPIO_SD2_CD			IMX_GPIO_NR(1, 4)
+#define GPIO_SD2_WP			IMX_GPIO_NR(1, 2)
+
+static struct esdhc_platform_data tqma53_sd2_data = {
+	.cd_gpio = GPIO_SD2_CD,
+	.wp_gpio = GPIO_SD2_WP,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_GPIO,
+};
+
+static struct esdhc_platform_data tqma53_sd3_data = {
+	.cd_type = ESDHC_CD_PERMANENT,
+	.wp_type = ESDHC_WP_NONE,
+	.caps = MMC_MODE_8BIT | MMC_MODE_4BIT,
+};
+
+static int tqma53_devices_init(void)
+{
+	gpio_direction_output(GPIO_FEC_NRESET, 0);
+	mdelay(1);
+	gpio_set_value(GPIO_FEC_NRESET, 1);
+
+	imx51_iim_register_fec_ethaddr();
+	imx53_add_fec(&fec_info);
+	imx53_add_mmc1(&tqma53_sd2_data);
+	imx53_add_mmc2(&tqma53_sd3_data);
+
+	armlinux_set_bootparams((void *)0x70000100);
+	armlinux_set_architecture(MACH_TYPE_TQMA53);
+
+	return 0;
+}
+device_initcall(tqma53_devices_init);
+
+static int tqma53_part_init(void)
+{
+	devfs_add_partition("disk0", 0x00000, SZ_1M, PARTITION_FIXED, "self0");
+	devfs_add_partition("disk0", SZ_1M, SZ_1M, PARTITION_FIXED, "env0");
+
+	return 0;
+}
+late_initcall(tqma53_part_init);
+
+static int tqma53_console_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(tqma53_pads, ARRAY_SIZE(tqma53_pads));
+	imx53_init_lowlevel(800);
+	imx53_add_uart0();
+
+	return 0;
+}
+console_initcall(tqma53_console_init);
diff --git a/arch/arm/boards/tqma53/config.h b/arch/arm/boards/tqma53/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/tqma53/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/tqma53/env/config b/arch/arm/boards/tqma53/env/config
new file mode 100644
index 0000000..97b009c
--- /dev/null
+++ b/arch/arm/boards/tqma53/env/config
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+machine=tqma53
+serverip=
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'nfs', 'tftp', 'nor' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nor', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-$machine.$rootfs_type
+
+kernelimage=zImage-$machine
+
+if [ -n $user ]; then
+	kernelimage="$user"-"$kernelimage"
+	nfsroot="$serverip:/home/$user/nfsroot/$machine"
+	rootfsimage="$user"-"$rootfsimage"
+else
+	nfsroot="$serverip:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+bootargs="console=ttymxc0,115200"
+
+disk_parts="1M(barebox)ro,1M(bareboxenv),4M(kernel),-(root)"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/tqma53/flash_header.c b/arch/arm/boards/tqma53/flash_header.c
new file mode 100644
index 0000000..73ea0c3
--- /dev/null
+++ b/arch/arm/boards/tqma53/flash_header.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Marc Kleine-Budde <mkl@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/imx-flash-header.h>
+
+void __naked __flash_header_start go(void)
+{
+	__asm__ __volatile__("b exception_vectors\n");
+}
+
+struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
+	/* IOMUX */
+	{ .addr = cpu_to_be32(0x53fa8554), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8558), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8560), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8564), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8568), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8570), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8574), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8578), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa857c), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8580), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8584), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8588), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8590), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8594), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f0), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f4), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa86fc), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8714), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8718), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa871c), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8720), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8724), .val = cpu_to_be32(0x04000000), },
+	{ .addr = cpu_to_be32(0x53fa8728), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa872c), .val = cpu_to_be32(0x00300000), },
+	/* ESDCTL */
+	{ .addr = cpu_to_be32(0x63fd9088), .val = cpu_to_be32(0x35343535), },
+	{ .addr = cpu_to_be32(0x63fd9090), .val = cpu_to_be32(0x4d444c44), },
+	{ .addr = cpu_to_be32(0x63fd907c), .val = cpu_to_be32(0x01370138), },
+	{ .addr = cpu_to_be32(0x63fd9080), .val = cpu_to_be32(0x013b013c), },
+	{ .addr = cpu_to_be32(0x63fd90f8), .val = cpu_to_be32(0x00000800), },
+#ifdef CONFIG_MACH_TQMA53_1GB_RAM
+	{ .addr = cpu_to_be32(0x63fd9018), .val = cpu_to_be32(0x00001740), },
+	{ .addr = cpu_to_be32(0x63fd9000), .val = cpu_to_be32(0xc3190000), },
+#else
+	{ .addr = cpu_to_be32(0x63fd9018), .val = cpu_to_be32(0x00101740), },
+	{ .addr = cpu_to_be32(0x63fd9000), .val = cpu_to_be32(0x83190000), },
+#endif
+	{ .addr = cpu_to_be32(0x63fd900c), .val = cpu_to_be32(0x9f5152e3), },
+	{ .addr = cpu_to_be32(0x63fd9010), .val = cpu_to_be32(0xb68e8a63), },
+	{ .addr = cpu_to_be32(0x63fd9014), .val = cpu_to_be32(0x01ff00db), },
+	{ .addr = cpu_to_be32(0x63fd902c), .val = cpu_to_be32(0x000026d2), },
+	{ .addr = cpu_to_be32(0x63fd9030), .val = cpu_to_be32(0x009f0e21), },
+	{ .addr = cpu_to_be32(0x63fd9008), .val = cpu_to_be32(0x12273030), },
+	{ .addr = cpu_to_be32(0x63fd9004), .val = cpu_to_be32(0x0002002d), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008032), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008033), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028031), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x052080b0), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008040), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803a), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803b), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028039), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x05208138), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008048), },
+	{ .addr = cpu_to_be32(0x63fd9020), .val = cpu_to_be32(0x00005800), },
+	{ .addr = cpu_to_be32(0x63fd9040), .val = cpu_to_be32(0x04b80003), },
+	{ .addr = cpu_to_be32(0x63fd9058), .val = cpu_to_be32(0x00022227), },
+	{ .addr = cpu_to_be32(0x63fd901C), .val = cpu_to_be32(0x00000000), },
+};
+
+#define APP_DEST	CONFIG_TEXT_BASE
+
+struct imx_flash_header_v2 __flash_header_section flash_header = {
+	.header.tag		= IVT_HEADER_TAG,
+	.header.length		= cpu_to_be16(32),
+	.header.version		= IVT_VERSION,
+
+	.entry			= APP_DEST + 0x1000,
+	.dcd_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, dcd),
+	.boot_data_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, boot_data),
+	.self			= APP_DEST + 0x400,
+
+	.boot_data.start	= APP_DEST,
+	.boot_data.size		= 0x40000,
+
+	.dcd.header.tag		= DCD_HEADER_TAG,
+	.dcd.header.length	= cpu_to_be16(sizeof(struct imx_dcd) + sizeof(dcd_entry)),
+	.dcd.header.version	= DCD_VERSION,
+
+	.dcd.command.tag	= DCD_COMMAND_WRITE_TAG,
+	.dcd.command.length	= cpu_to_be16(sizeof(struct imx_dcd_command) + sizeof(dcd_entry)),
+	.dcd.command.param	= DCD_COMMAND_WRITE_PARAM,
+};
diff --git a/arch/arm/configs/tqma53_defconfig b/arch/arm/configs/tqma53_defconfig
new file mode 100644
index 0000000..2540271
--- /dev/null
+++ b/arch/arm/configs/tqma53_defconfig
@@ -0,0 +1,64 @@
+CONFIG_ARCH_IMX=y
+CONFIG_ARCH_IMX53=y
+CONFIG_MACH_TQMA53=y
+CONFIG_IMX_IIM=y
+CONFIG_IMX_IIM_FUSE_BLOW=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x2000000
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="defaultenv arch/arm/boards/freescale-mx53-loco/env/"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTZ is not set
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_DRIVER_NET_FEC_IMX=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_IMX_ESDHC=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_ZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index a4b603b..853757b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -23,6 +23,7 @@ config ARCH_TEXT_BASE
 	default 0x7ff00000 if MACH_MX53_SMD
 	default 0x87f00000 if MACH_GUF_CUPID
 	default 0x93d00000 if MACH_TX25
+	default 0x7ff00000 if MACH_TQMA53
 
 config BOARDINFO
 	default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25
@@ -44,6 +45,7 @@ config BOARDINFO
 	default "Freescale i.MX53 SMD" if MACH_FREESCALE_MX53_SMD
 	default "Garz+Fricke Cupid" if MACH_GUF_CUPID
 	default "Ka-Ro tx25" if MACH_TX25
+	default "TQ tqma53" if MACH_TQMA53
 
 choice
 	prompt "Select boot mode"
@@ -397,6 +399,15 @@ config MACH_FREESCALE_MX53_LOCO
 config MACH_FREESCALE_MX53_SMD
 	bool "Freescale i.MX53 SMD"
 
+config MACH_TQMA53
+	bool "TQ i.MX53 TQMA53"
+
+config MACH_TQMA53_1GB_RAM
+	bool "Use 1GiB of SDRAM"
+	depends on MACH_TQMA53
+	help
+	  use 1GiB of SDRAM (512MiB otherwise)
+
 endchoice
 
 endif
-- 
1.7.9


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [PATCH 1/3] arm: update mach-types
@ 2010-05-25 15:35 Eric Bénard
  0 siblings, 0 replies; 5+ messages in thread
From: Eric Bénard @ 2010-05-25 15:35 UTC (permalink / raw)
  To: s.hauer; +Cc: barebox

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 arch/arm/tools/mach-types |  133 +++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 128 insertions(+), 5 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index cc5275b..32d7833 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Mar 15 15:32:14 2010
+# Last update: Mon May 24 21:27:47 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1777,7 +1777,7 @@ wdg002			MACH_WDG002		WDG002			1785
 sg560adsl		MACH_SG560ADSL		SG560ADSL		1786
 nextio_n2800_ica	MACH_NEXTIO_N2800_ICA	NEXTIO_N2800_ICA	1787
 dove_db			MACH_DOVE_DB		DOVE_DB			1788
-marvell_newdb		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
+dove_avng		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
 vandihud		MACH_VANDIHUD		VANDIHUD		1790
 magx_e8			MACH_MAGX_E8		MAGX_E8			1791
 magx_z6			MACH_MAGX_Z6		MAGX_Z6			1792
@@ -2308,7 +2308,7 @@ ecac2378		MACH_ECAC2378		ECAC2378		2319
 tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
 whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
 sbox9263		MACH_SBOX9263		SBOX9263		2322
-oreo			MACH_OREO		OREO			2323
+oreo_camera		MACH_OREO		OREO			2323
 smdk6442		MACH_SMDK6442		SMDK6442		2324
 openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
 incredible		MACH_INCREDIBLE		INCREDIBLE		2326
@@ -2498,7 +2498,7 @@ hiram			MACH_HIRAM		HIRAM			2510
 phy3250			MACH_PHY3250		PHY3250			2511
 ea3250			MACH_EA3250		EA3250			2512
 fdi3250			MACH_FDI3250		FDI3250			2513
-whitestone		MACH_WHITESTONE		WHITESTONE		2514
+htcwhitestone		MACH_WHITESTONE		WHITESTONE		2514
 at91sam9263nit		MACH_AT91SAM9263NIT	AT91SAM9263NIT		2515
 ccmx51			MACH_CCMX51		CCMX51			2516
 ccmx51js		MACH_CCMX51JS		CCMX51JS		2517
@@ -2582,7 +2582,7 @@ omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
 pca101			MACH_PCA101		PCA101			2595
 buzzc			MACH_BUZZC		BUZZC			2596
 sasie2			MACH_SASIE2		SASIE2			2597
-davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
+davinci_dm6467_cio	MACH_DAVINCI_CIO	DAVINCI_CIO		2598
 smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
 wzl6410			MACH_WZL6410		WZL6410			2600
 wzl6410m		MACH_WZL6410M		WZL6410M		2601
@@ -2736,3 +2736,126 @@ bcmring_tablet_v1	MACH_BCMRING_TABLET_V1	BCMRING_TABLET_V1	2748
 sgarm10			MACH_SGARM10		SGARM10			2749
 cm_t3517		MACH_CM_T3517		CM_T3517		2750
 omap3_cps		MACH_OMAP3_CPS		OMAP3_CPS		2751
+axar1500_receiver	MACH_AXAR1500_RECEIVER	AXAR1500_RECEIVER	2752
+wbd222			MACH_WBD222		WBD222			2753
+mt65xx			MACH_MT65XX		MT65XX			2754
+msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
+msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
+vmc300			MACH_VMC300		VMC300			2757
+tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
+nanos			MACH_NANOS		NANOS			2759
+stamp9g10		MACH_STAMP9G10		STAMP9G10		2760
+stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
+h6053			MACH_H6053		H6053			2762
+smint01			MACH_SMINT01		SMINT01			2763
+prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
+ap420			MACH_AP420		AP420			2765
+htcclio			MACH_HTCSHIFT		HTCSHIFT		2766
+davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
+msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
+msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
+esl_vamana		MACH_ESL_VAMANA		ESL_VAMANA		2770
+sbc35			MACH_SBC35		SBC35			2771
+mpx6446			MACH_MPX6446		MPX6446			2772
+oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
+kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
+ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
+cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
+lpc_evo			MACH_LPC2		LPC2			2777
+olympus			MACH_OLYMPUS		OLYMPUS			2778
+vortex			MACH_VORTEX		VORTEX			2779
+s5pc200			MACH_S5PC200		S5PC200			2780
+ecucore_9263		MACH_ECUCORE_9263	ECUCORE_9263		2781
+smdkc200		MACH_SMDKC200		SMDKC200		2782
+emsiso_sx27		MACH_EMSISO_SX27	EMSISO_SX27		2783
+apx_som9g45_ek		MACH_APX_SOM9G45_EK	APX_SOM9G45_EK		2784
+songshan		MACH_SONGSHAN		SONGSHAN		2785
+tianshan		MACH_TIANSHAN		TIANSHAN		2786
+vpx500			MACH_VPX500		VPX500			2787
+am3517sam		MACH_AM3517SAM		AM3517SAM		2788
+skat91_sim508		MACH_SKAT91_SIM508	SKAT91_SIM508		2789
+skat91_s3e		MACH_SKAT91_S3E		SKAT91_S3E		2790
+omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
+df7220			MACH_DF7220		DF7220			2792
+nemini			MACH_NEMINI		NEMINI			2793
+t8200			MACH_T8200		T8200			2794
+apf51			MACH_APF51		APF51			2795
+dr_rc_unit		MACH_DR_RC_UNIT		DR_RC_UNIT		2796
+bordeaux		MACH_BORDEAUX		BORDEAUX		2797
+catania_b		MACH_CATANIA_B		CATANIA_B		2798
+mx51_ocean		MACH_MX51_OCEAN		MX51_OCEAN		2799
+ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
+neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
+withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
+dbps			MACH_DBPS		DBPS			2803
+at91sam9261		MACH_SBC9261		SBC9261			2804
+pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
+speedy			MACH_SPEEDY		SPEEDY			2806
+chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
+tango			MACH_TANGO		TANGO			2808
+synology_dsx11		MACH_SYNOLOGY_DSX11	SYNOLOGY_DSX11		2809
+hanlin_v3ext		MACH_HANLIN_V3EXT	HANLIN_V3EXT		2810
+hanlin_v5		MACH_HANLIN_V5		HANLIN_V5		2811
+hanlin_v3plus		MACH_HANLIN_V3PLUS	HANLIN_V3PLUS		2812
+iriver_story		MACH_IRIVER_STORY	IRIVER_STORY		2813
+irex_iliad		MACH_IREX_ILIAD		IREX_ILIAD		2814
+irex_dr1000		MACH_IREX_DR1000	IREX_DR1000		2815
+teton_bga		MACH_TETON_BGA		TETON_BGA		2816
+snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
+tam3517			MACH_TAM3517		TAM3517			2818
+pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
-- 
1.6.3.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-02-13 10:40 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-13 10:40 [PATCH] Add TQ tqma53 support Sascha Hauer
2012-02-13 10:40 ` [PATCH 1/3] ARM: update mach-types Sascha Hauer
2012-02-13 10:40 ` [PATCH 2/3] ARM i.MX5: Allow to pass cpu clock to lowlevel init Sascha Hauer
2012-02-13 10:40 ` [PATCH 3/3] initial tqm53 support Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2010-05-25 15:35 [PATCH 1/3] arm: update mach-types Eric Bénard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox