mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 6/7] mx53-loco: add board revision support
Date: Mon, 27 Feb 2012 09:20:12 +0100	[thread overview]
Message-ID: <1330330813-21605-6-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1330330813-21605-1-git-send-email-eric@eukrea.com>

- this is taken from freescale-mx35-3-stack/3stack.c and allows
this board to run Freescale's kernel which relies on the system
revision to configure the correct PMIC.

- On rev0 boards (with DA9053), the log is :
detected i.MX53 rev 2.1
MCIMX53-START board 1.0

On newer boards (rev A or B with MC34708), the log is :
mc34708-i2c@mc34708-i2c0: MC34708 ID: 0x0014
detected i.MX53 rev 2.1
MCIMX53-START-R board 1.0 rev B

Signed-off-by: Eric Bénard <eric@eukrea.com>
---
 arch/arm/boards/freescale-mx53-loco/board.c |   51 +++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
index 66ff040..6c0e1d1 100644
--- a/arch/arm/boards/freescale-mx53-loco/board.c
+++ b/arch/arm/boards/freescale-mx53-loco/board.c
@@ -103,6 +103,31 @@ static struct i2c_board_info i2c_devices[] = {
 	},
 };
 
+/*
+ * Revision to be passed to kernel. The kernel provided
+ * by freescale relies on this.
+ *
+ * C --> CPU type
+ * S --> Silicon revision
+ * B --> Board rev
+ *
+ * 31    20     16     12    8      4     0
+ *        | Cmaj | Cmin | B  | Smaj | Smin|
+ *
+ * e.g 0x00053120 --> i.MX35, Cpu silicon rev 2.0, Board rev 2
+*/
+static unsigned int loco_system_rev = 0x00053000;
+
+static void set_silicon_rev( int rev)
+{
+	loco_system_rev = loco_system_rev | (rev & 0xFF);
+}
+
+static void set_board_rev(int rev)
+{
+	loco_system_rev =  (loco_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8;
+}
+
 static int loco_mem_init(void)
 {
 	arm_add_mem_device("ram0", 0x70000000, SZ_512M);
@@ -149,6 +174,8 @@ static int loco_devices_init(void)
 
 	loco_fec_reset();
 
+	set_silicon_rev(imx_silicon_revision());
+
 	armlinux_set_bootparams((void *)0x70000100);
 	armlinux_set_architecture(MACH_TYPE_MX53_LOCO);
 
@@ -177,3 +204,27 @@ static int loco_console_init(void)
 }
 
 console_initcall(loco_console_init);
+
+static int loco_pmic_init(void)
+{
+	struct mc34708 *mc34708;
+	int rev;
+
+	mc34708 = mc34708_get();
+	if (!mc34708) {
+		/* so we have a DA9053 based board */
+		printf("MCIMX53-START board 1.0\n");
+		armlinux_set_revision(loco_system_rev);
+		return 0;
+	}
+
+	/* get the board revision from fuse */
+	rev = readl(MX53_IIM_BASE_ADDR + 0x878);
+	set_board_rev(rev);
+	printf("MCIMX53-START-R board 1.0 rev %c\n", (rev == 1) ? 'A' : 'B' );
+	armlinux_set_revision(loco_system_rev);
+
+	return 0;
+}
+
+late_initcall(loco_pmic_init);
-- 
1.7.7.6


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-02-27  8:20 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-21  0:27 [PATCH 1/7] add i2c clock support Eric Bénard
2012-02-21  0:27 ` [PATCH 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-21  3:48   ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21  7:03     ` Eric Bénard
2012-02-21 13:03       ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 13:22         ` Eric Bénard
2012-02-21 14:10           ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 15:35             ` Eric Bénard
2012-02-21 15:38               ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21 20:45                 ` Sascha Hauer
2012-02-21 21:09                   ` Marc Reilly
2012-02-21  0:27 ` [PATCH 3/7] i.MX53: add silicn revision functions Eric Bénard
2012-02-22  7:33   ` Sascha Hauer
2012-02-27  8:20     ` [PATCH v2 1/7] add i2c clock support Eric Bénard
2012-02-27  8:20       ` [PATCH v2 2/7] mfd: add mc34708 driver Eric Bénard
2012-02-27  8:20       ` [PATCH v2 3/7] i.MX53: add silicon revision functions Eric Bénard
2012-02-27  8:20       ` [PATCH v2 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-27  8:20       ` [PATCH v2 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-27  8:20       ` Eric Bénard [this message]
2012-02-27 15:40         ` [PATCH v2 6/7] mx53-loco: add board revision support Jean-Christophe PLAGNIOL-VILLARD
2012-02-27 18:58           ` Sascha Hauer
2012-02-27  8:20       ` [PATCH v2 7/7] mx53-loco: update defconfig Eric Bénard
2012-02-27 18:59       ` [PATCH v2 1/7] add i2c clock support Sascha Hauer
2012-02-21  0:27 ` [PATCH 4/7] i.MX53: enable pull up on I2C0 pins Eric Bénard
2012-02-21  0:27 ` [PATCH 5/7] mx53-loco: add i2c support Eric Bénard
2012-02-21  0:27 ` [PATCH 6/7] mx53-loco: add board revision support Eric Bénard
2012-02-21  3:50   ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-21  0:27 ` [PATCH 7/7] mx53-loco: update defconfig Eric Bénard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330330813-21605-6-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox