[RFC V2 5/6] net: add Realtek 8139 Ethernet controller support

[Antony Pavlov <antonynpavlov@gmail.com>]

This driver is based on Linux 2.6.39 8139too driver.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/net/Kconfig     |    8 +
 drivers/pci/Makefile    |    1 +
 drivers/pci/rtl8139.c   |  654 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci_ids.h |    5 +
 4 files changed, 668 insertions(+), 0 deletions(-)
 create mode 100644 drivers/pci/rtl8139.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b236d17..ff18b5e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -100,6 +100,14 @@ config TSE_USE_DEDICATED_DESC_MEM
 	  reserved with a malloc but directly mapped to the memory
 	  address (defined in config.h)
 
+config 8139
+	depends on PCI
+	bool "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
+	select MIIDEV
+	help
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8139 chips.
+
 source "drivers/net/usb/Kconfig"
 
 endmenu
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c7d43c3..6523385 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PCI bus specific drivers.
 #
 obj-y		+= pci.o bus.o
+obj-$(CONFIG_8139)	+= rtl8139.o
 
 ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
 
diff --git a/drivers/pci/rtl8139.c b/drivers/pci/rtl8139.c
new file mode 100644
index 0000000..57575bb
--- /dev/null
+++ b/drivers/pci/rtl8139.c
@@ -0,0 +1,654 @@
+#include <common.h>
+
+#include <command.h>
+#include <net.h>
+#include <miidev.h>
+#include <malloc.h>
+#include <init.h>
+#include <xfuncs.h>
+#include <errno.h>
+#include <clock.h>
+#include <asm/io.h>
+
+#include <linux/pci.h>
+
+#undef RTL8139_DEBUG
+#define RTL8139_DEBUG
+
+/*
+ * Receive ring size
+ * Warning: 64K ring has hardware issues and may lock up.
+ */
+#define RX_BUF_IDX	0	/* 8K ring */
+#define RX_BUF_LEN	(8192 << RX_BUF_IDX)
+#define RX_BUF_PAD	16
+#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
+
+#if RX_BUF_LEN == 65536
+#define RX_BUF_TOT_LEN	RX_BUF_LEN
+#else
+#define RX_BUF_TOT_LEN	(RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#endif
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC	4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE	1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE	MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN	(TX_BUF_SIZE * NUM_TX_DESC)
+
+/* PCI Tuning Parameters
+   Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+
+/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH	7	/* Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST	7	/* Maximum PCI burst, '6' is 1024 */
+#define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
+#define TX_RETRY	8	/* 0-15.  retries = 16 + (TX_RETRY * 16) */
+
+struct rtl8139_priv {
+	void __iomem		*base;
+	struct pci_dev		*pci_dev;
+	unsigned char		*rx_ring;
+	unsigned int		cur_rx; /* RX buf index of next pkt */
+	dma_addr_t		rx_ring_dma;
+
+	u32			rx_config;
+	unsigned int		tx_flag;
+	unsigned long		cur_tx;
+	unsigned long		dirty_tx;
+	unsigned char		*tx_buf[NUM_TX_DESC];   /* Tx bounce buffers */
+	unsigned char		*tx_bufs;       /* Tx bounce buffer region. */
+	dma_addr_t		tx_bufs_dma;
+
+	struct mii_device	miidev;
+};
+
+#define ETH_ZLEN        60              /* Min. octets in frame sans FCS */
+
+/* Registers */
+#define MAC0		0x00
+#define MAR0		0x08
+#define TxStatus0	0x10
+
+enum TxStatusBits {
+	TxHostOwns	= 0x2000,
+	TxUnderrun	= 0x4000,
+	TxStatOK	= 0x8000,
+	TxOutOfWindow	= 0x20000000,
+	TxAborted	= 0x40000000,
+	TxCarrierLost	= 0x80000000,
+};
+
+#define TxAddr0		0x20
+#define RxBuf		0x30
+#define ChipCmd		0x37
+#define  CmdReset	0x10
+#define  CmdRxEnb	0x08
+#define  CmdTxEnb	0x04
+#define  RxBufEmpty	0x01
+#define RxBufPtr	0x38
+#define RxBufAddr	0x3A
+#define IntrMask	0x3C
+#define IntrStatus	0x3E
+#define  PCIErr		0x8000
+#define  PCSTimeout	0x4000
+#define  RxFIFOOver	0x0040
+#define  RxUnderrun	0x0020
+#define  RxOverflow	0x0010
+#define  TxErr		0x0008
+#define  TxOK		0x0004
+#define  RxErr		0x0002
+#define  RxOK		0x0001
+#define    RxAckBits	(RxFIFOOver | RxOverflow | RxOK)
+
+#define TxConfig	0x40
+/* Bits in TxConfig. */
+enum tx_config_bits {
+	/* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
+	TxIFGShift	= 24,
+	TxIFG84		= (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
+	TxIFG88		= (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
+	TxIFG92		= (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
+	TxIFG96		= (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
+
+	TxLoopBack	= (1 << 18) | (1 << 17), /* enable loopback test mode */
+	TxCRC		= (1 << 16),	/* DISABLE Tx pkt CRC append */
+	TxClearAbt	= (1 << 0),	/* Clear abort (WO) */
+	TxDMAShift	= 8, /* DMA burst value (0-7) is shifted X many bits */
+	TxRetryShift	= 4, /* TXRR value (0-15) is shifted X many bits */
+
+	TxVersionMask	= 0x7C800000, /* mask out version bits 30-26, 23 */
+};
+
+#define RxConfig	0x44
+	/* rx fifo threshold */
+#define  RxCfgFIFOShift	13
+#define	 RxCfgFIFONone	(7 << RxCfgFIFOShift)
+	/* Max DMA burst */
+#define	 RxCfgDMAShift	8
+#define	 RxCfgDMAUnlimited (7 << RxCfgDMAShift)
+	/* rx ring buffer length */
+#define	 RxCfgRcv8K	0
+#define	 RxCfgRcv16K	(1 << 11)
+#define	 RxCfgRcv32K	(1 << 12)
+#define	 RxCfgRcv64K	((1 << 11) | (1 << 12))
+	/* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
+#define	 RxNoWrap	(1 << 7)
+#define	 AcceptErr		0x20
+#define	 AcceptRunt		0x10
+#define	 AcceptBroadcast	0x08
+#define	 AcceptMulticast	0x04
+#define	 AcceptMyPhys		0x02
+#define	 AcceptAllPhys		0x01
+
+#define RxMissed	0x4C
+#define Cfg9346		0x50
+#define  Cfg9346_Lock	0x00
+#define  Cfg9346_Unlock	0xC0
+#define BasicModeCtrl	0x62
+#define BasicModeStatus	0x64
+#define NWayAdvert	0x66
+#define NWayLPAR	0x68
+#define NWayExpansion	0x6a
+
+static const char mii_2_8139_map[8] = {
+	BasicModeCtrl,
+	BasicModeStatus,
+	0,
+	0,
+	NWayAdvert,
+	NWayLPAR,
+	NWayExpansion,
+	0
+};
+
+/* write MMIO register */
+#define RTL_W8(priv, reg, val)	writeb(val, ((char *)(priv->base) + reg))
+#define RTL_W16(priv, reg, val)	writew(val, ((char *)(priv->base) + reg))
+#define RTL_W32(priv, reg, val)	writel(val, ((char *)(priv->base) + reg))
+
+/* read MMIO register */
+#define RTL_R8(priv, reg)	readb(((char *)(priv->base) + reg))
+#define RTL_R16(priv, reg)	readw(((char *)(priv->base) + reg))
+#define RTL_R32(priv, reg)	readl(((char *)(priv->base) + reg))
+
+/* write MMIO register, with flush */
+/* Flush avoids rtl8139 bug w/ posted MMIO writes */
+static inline void RTL_W8_F(struct rtl8139_priv *priv, int reg, int val)
+{
+	RTL_W8(priv, reg, val);
+	RTL_R8(priv, reg);
+}
+
+static inline void RTL_W16_F(struct rtl8139_priv *priv, int reg, int val)
+{
+	RTL_W16(priv, reg, val);
+	RTL_R16(priv, reg);
+}
+
+static inline void RTL_W32_F(struct rtl8139_priv *priv, int reg, int val)
+{
+	RTL_W32(priv, reg, val);
+	RTL_R32(priv, reg);
+}
+
+static const unsigned int rtl8139_rx_config =
+	RxCfgRcv8K | RxNoWrap |
+	(RX_FIFO_THRESH << RxCfgFIFOShift) |
+	(RX_DMA_BURST << RxCfgDMAShift);
+
+static const unsigned int rtl8139_tx_config =
+	TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
+
+static void rtl8139_chip_reset(struct rtl8139_priv *priv)
+{
+	int i;
+
+#ifdef RTL8139_DEBUG
+	printf("rtl8139_chip_reset()\n");
+#endif
+
+	/* Soft reset the chip. */
+	RTL_W8(priv, ChipCmd, CmdReset);
+
+	/* Check that the chip has finished the reset. */
+	for (i = 1000; i > 0; i--) {
+		//barrier();
+		if ((RTL_R8(priv, ChipCmd) & CmdReset) == 0)
+			break;
+		udelay(10);
+	}
+}
+
+static void __set_rx_mode(struct rtl8139_priv *priv)
+{
+	u32 mc_filter[2];	/* Multicast hash filter */
+	int rx_mode;
+	u32 tmp;
+
+	rx_mode =
+	    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+	    AcceptAllPhys;
+	mc_filter[1] = mc_filter[0] = 0xffffffff;
+
+	/* We can safely update without stopping the chip. */
+	tmp = rtl8139_rx_config | rx_mode;
+	if (priv->rx_config != tmp) {
+		RTL_W32_F(priv, RxConfig, tmp);
+		priv->rx_config = tmp;
+	}
+
+	RTL_W32_F(priv, MAR0 + 0, mc_filter[0]);
+	RTL_W32_F(priv, MAR0 + 4, mc_filter[1]);
+}
+
+/* Start the hardware at open or resume. */
+static void rtl8139_hw_start(struct rtl8139_priv *priv)
+{
+	u32 i;
+	u8 tmp;
+
+	rtl8139_chip_reset(priv);
+
+	/* unlock Config[01234] and BMCR register writes */
+	RTL_W8_F(priv, Cfg9346, Cfg9346_Unlock);
+
+#if 0
+	/* Restore our idea of the MAC address. */
+	RTL_W32_F(priv, MAC0 + 0, *(__le32 *) (dev->dev_addr + 0));
+	RTL_W32_F(priv, MAC0 + 4, *(__le16 *) (dev->dev_addr + 4));
+#endif
+
+	priv->cur_rx = 0;
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F(priv, RxBuf, priv->rx_ring_dma);
+
+	/* Must enable Tx/Rx before setting transfer thresholds! */
+	RTL_W8(priv, ChipCmd, CmdRxEnb | CmdTxEnb);
+
+	priv->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
+	RTL_W32(priv, RxConfig, priv->rx_config);
+	RTL_W32(priv, TxConfig, rtl8139_tx_config);
+
+	/* Lock Config[01234] and BMCR register writes */
+	RTL_W8(priv, Cfg9346, Cfg9346_Lock);
+
+	/* init Tx buffer DMA addresses */
+	for (i = 0; i < NUM_TX_DESC; i++)
+		RTL_W32_F(priv, TxAddr0 + (i * 4), priv->tx_bufs_dma + (priv->tx_buf[i] - priv->tx_bufs));
+
+	RTL_W32(priv, RxMissed, 0);
+
+	__set_rx_mode(priv);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16(priv, IntrMask, 0);
+
+	/* make sure RxTx has started */
+	tmp = RTL_R8(priv, ChipCmd);
+	if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
+		RTL_W8(priv, ChipCmd, CmdRxEnb | CmdTxEnb);
+}
+
+static inline void rtl8139_tx_clear(struct rtl8139_priv *priv)
+{
+	priv->cur_tx = 0;
+	priv->dirty_tx = 0;
+
+	/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void rtl8139_init_ring(struct rtl8139_priv *priv)
+{
+	int i;
+
+	priv->cur_rx = 0;
+	priv->cur_tx = 0;
+	priv->dirty_tx = 0;
+
+	for (i = 0; i < NUM_TX_DESC; i++)
+		priv->tx_buf[i] = &priv->tx_bufs[i * TX_BUF_SIZE];
+}
+
+static int rtl8139_phy_read(struct mii_device *mdev, int phy_addr, int reg)
+{
+	struct eth_device *edev = mdev->edev;
+	struct rtl8139_priv *priv = edev->priv;
+	int val;
+
+	val = 0;
+
+	if (phy_addr == 0) { /* Really a 8139. Use internal registers. */
+		val = reg < 8 && mii_2_8139_map[reg] ?
+				RTL_R16(priv, mii_2_8139_map[reg]) : 0;
+	}
+
+#ifdef RTL8139_DEBUG
+	printf("%s: addr: 0x%02x reg: 0x%02x val: 0x%04x\n", __func__,
+			phy_addr, reg, val);
+#endif
+
+	return val;
+}
+
+static int rtl8139_phy_write(struct mii_device *mdev, int phy_addr,
+	int reg, int val)
+{
+	struct eth_device *edev = mdev->edev;
+	struct rtl8139_priv *priv = edev->priv;
+
+#ifdef RTL8139_DEBUG
+	printf("%s: addr: 0x%02x reg: 0x%02x val: 0x%04x\n", __func__,
+	      phy_addr, reg, val);
+#endif
+
+	if (phy_addr == 0) { /* Really a 8139. Use internal registers. */
+		if (reg == 0) {
+			RTL_W8(priv, Cfg9346, Cfg9346_Unlock);
+			RTL_W16(priv, BasicModeCtrl, val);
+			RTL_W8(priv, Cfg9346, Cfg9346_Lock);
+		} else if (reg < 8 && mii_2_8139_map[reg]) {
+			RTL_W16(priv, mii_2_8139_map[reg], val);
+		}
+	}
+
+	return 0;
+}
+
+static int rtl8139_get_ethaddr(struct eth_device *edev, unsigned char *m)
+{
+	struct rtl8139_priv *priv = edev->priv;
+	int i;
+
+	for (i = 0; i < 6; ++i) {
+		m[i] = RTL_R8(priv, (MAC0 + i));
+	}
+
+	return 0;
+}
+
+static int rtl8139_set_ethaddr(struct eth_device *edev,
+					unsigned char *mac_addr)
+{
+	struct rtl8139_priv *priv = edev->priv;
+	int i;
+
+	RTL_W8(priv, Cfg9346, Cfg9346_Unlock);
+
+	for (i = 0; i < 6; i++) {
+		RTL_W8(priv, (MAC0 + i), mac_addr[i]);
+		RTL_R8(priv, mac_addr[i]);
+	}
+
+	RTL_W8(priv, Cfg9346, Cfg9346_Lock);
+
+	return 0;
+}
+
+static int rtl8139_init_dev(struct eth_device *edev)
+{
+	struct rtl8139_priv *priv = edev->priv;
+
+#ifdef RTL8139_DEBUG
+	printf("rtl8139_init_dev()\n");
+#endif
+
+	rtl8139_chip_reset(priv);
+
+	//miidev_restart_aneg(&priv->miidev);
+
+	return 0;
+}
+
+static int rtl8139_eth_open(struct eth_device *edev)
+{
+	struct rtl8139_priv *priv = edev->priv;
+
+	/* HACK: FIXME */
+	priv->tx_bufs = (unsigned char *)0xa1000000;
+	priv->tx_bufs_dma = (dma_addr_t)0x01000000;
+
+	priv->rx_ring = (unsigned char *)0xa2000000;
+	priv->rx_ring_dma = (dma_addr_t)0x02000000;
+
+	priv->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
+
+	rtl8139_init_ring(priv);
+	rtl8139_hw_start(priv);
+
+	miidev_wait_aneg(&priv->miidev);
+	miidev_print_status(&priv->miidev);
+
+	return 0;
+}
+
+static void rtl8139_eth_halt(struct eth_device *edev)
+{
+	struct rtl8139_priv *priv = edev->priv;
+
+	/* Stop the chip's Tx and Rx DMA processes. */
+	RTL_W8(priv, ChipCmd, 0);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	RTL_W16(priv, IntrMask, 0);
+
+	/* Green! Put the chip in low-power mode. */
+	RTL_W8(priv, Cfg9346, Cfg9346_Unlock);
+}
+
+static void rtl8139_tx_interrupt(struct rtl8139_priv *priv)
+{
+	unsigned long dirty_tx, tx_left;
+
+	dirty_tx = priv->dirty_tx;
+	tx_left = priv->cur_tx - dirty_tx;
+	while (tx_left > 0) {
+		int entry = dirty_tx % NUM_TX_DESC;
+		int txstatus;
+
+		txstatus = RTL_R32(priv, TxStatus0 + (entry * sizeof(u32)));
+
+		if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
+			break;	/* It still hasn't been Txed */
+
+		/* Note: TxCarrierLost is always asserted at 100mbps. */
+		if (txstatus & (TxOutOfWindow | TxAborted)) {
+			/* There was an major error, log it. */
+			printf("Transmit error, Tx status %08x\n", txstatus);
+			if (txstatus & TxAborted) {
+				RTL_W32(priv, TxConfig, TxClearAbt);
+				RTL_W16(priv, IntrStatus, TxErr);
+			}
+		} else {
+			if (txstatus & TxUnderrun) {
+				/* Add 64 to the Tx FIFO threshold. */
+				if (priv->tx_flag < 0x00300000)
+					priv->tx_flag += 0x00020000;
+			}
+		}
+
+		dirty_tx++;
+		tx_left--;
+	}
+
+	if (priv->dirty_tx != dirty_tx) {
+		priv->dirty_tx = dirty_tx;
+	}
+}
+
+static int rtl8139_eth_send(struct eth_device *edev, void *packet,
+				int packet_length)
+{
+	struct rtl8139_priv *priv = edev->priv;
+
+	unsigned int entry;
+
+#ifdef RTL8139_DEBUG
+	printf("rtl8139_eth_send()\n");
+	memory_display(packet, 0, 70, 1);
+#endif
+
+	rtl8139_tx_interrupt(priv);
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = priv->cur_tx % NUM_TX_DESC;
+
+	/* Note: the chip doesn't have auto-pad! */
+	if (likely(packet_length < TX_BUF_SIZE)) {
+		if (packet_length < ETH_ZLEN)
+			memset(priv->tx_buf[entry], 0, ETH_ZLEN);
+		memcpy(priv->tx_buf[entry], packet, packet_length);
+	} else {
+		printf("packet too long\n");
+		return 0;
+	}
+
+	/*
+	 * Writing to TxStatus triggers a DMA transfer of the data
+	 * copied to tp->tx_buf[entry] above.
+	 */
+	if (packet_length < ETH_ZLEN) {
+		packet_length = ETH_ZLEN;
+	}
+	RTL_W32_F(priv, (TxStatus0 + (entry * sizeof(u32))),
+			(priv->tx_flag | packet_length));
+
+	priv->cur_tx++;
+
+	return 0;
+}
+
+static const u16 rtl8139_intr_mask =
+		PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
+		TxErr | TxOK | RxErr | RxOK;
+
+static int rtl8139_eth_rx(struct eth_device *edev)
+{
+	struct rtl8139_priv *priv = edev->priv;
+	unsigned char *rx_ring = priv->rx_ring;
+	unsigned int cur_rx = priv->cur_rx;
+	unsigned int rx_size = 0;
+
+	u32 ring_offset = cur_rx % RX_BUF_LEN;
+	u32 rx_status;
+	unsigned int pkt_size;
+
+#ifdef RTL8139_DEBUG
+	printf("rtl8139_eth_rx()\n");
+
+	printf("In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+		   __func__, (u16)cur_rx,
+		   RTL_R16(priv, RxBufAddr), RTL_R16(priv, RxBufPtr),
+		   RTL_R8(priv, ChipCmd));
+#endif
+
+	rtl8139_tx_interrupt(priv);
+
+	if (RTL_R8(priv, ChipCmd) & RxBufEmpty) {
+		/* no data */
+		return 0;
+	}
+
+	rx_status = le32_to_cpu(*(__le32 *) (rx_ring + ring_offset));
+	rx_size = rx_status >> 16;
+	pkt_size = rx_size - 4;
+
+#ifdef RTL8139_DEBUG
+	memory_display(&rx_ring[ring_offset], 0, 70, 1);
+#endif
+
+	net_receive(&rx_ring[ring_offset + 4], pkt_size);
+
+	cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+	cur_rx = cur_rx & (RX_BUF_LEN - 1); /* FIXME */
+	RTL_W16(priv, RxBufPtr, (u16) (cur_rx - 16));
+
+	priv->cur_rx = cur_rx;
+
+	return pkt_size /* size */;
+}
+
+static int rtl8139_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct eth_device *edev;
+	struct rtl8139_priv *priv;
+
+	u32 bar;
+	struct pci_bus *bus = pdev->bus;
+	struct device_d *dev = &pdev->dev;
+
+#ifdef RTL8139_DEBUG
+	printf("rtl8139_probe()\n");
+#endif
+
+	/* enable pci device */
+	pci_read_config_dword(pdev, PCI_COMMAND, &bar);
+	pci_write_config_dword(pdev, PCI_COMMAND, bar | 0x03);
+
+	edev = xzalloc(sizeof(struct eth_device) +
+			sizeof(struct rtl8139_priv));
+	dev->type_data = edev;
+	priv = (struct rtl8139_priv *)(edev + 1);
+
+	edev->priv = priv;
+
+	priv->pci_dev = pdev;
+
+	priv->miidev.read = rtl8139_phy_read;
+	priv->miidev.write = rtl8139_phy_write;
+	priv->miidev.address = 0;
+	priv->miidev.flags = 0;
+	priv->miidev.edev = edev;
+
+	/* FIXME: pci_resource_start() */
+	pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1, &bar);
+	priv->base = (void *)bus->ops->res_start(bus, bar);
+
+	printf("found rtl8139 (rev %02x) at %02x: %04x (base=%p)\n",
+			pdev->revision,
+			pdev->devfn,
+			(pdev->class >> 8) & 0xffff,
+			priv->base);
+
+	edev->init = rtl8139_init_dev;
+	edev->open = rtl8139_eth_open;
+	edev->send = rtl8139_eth_send;
+	edev->recv = rtl8139_eth_rx;
+	edev->get_ethaddr = rtl8139_get_ethaddr;
+	edev->set_ethaddr = rtl8139_set_ethaddr;
+	edev->halt = rtl8139_eth_halt;
+
+	mii_register(&priv->miidev);
+	eth_register(edev);
+
+	return 0;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	PCI_DEVICE_ID_REALTEK_8139), },
+	{ },
+};
+
+static struct pci_driver rtl8139_eth_driver = {
+	.name = "rtl8139_eth",
+	.id_table = rtl8139_pci_tbl,
+	.probe = rtl8139_probe,
+};
+
+static int rtl8139_init(void)
+{
+	pci_register_driver(&rtl8139_eth_driver);
+
+	add_generic_device("rtl8139_eth", -1, NULL, 0xb0000000, 16,
+		IORESOURCE_MEM, NULL);
+
+	return 0;
+}
+device_initcall(rtl8139_init);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 49e2954..17ac7fd 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -134,3 +134,8 @@
 #define PCI_CLASS_SP_OTHER		0x1180
 
 #define PCI_CLASS_OTHERS		0xff
+
+/* Vendors and devices.  Sort key: vendor first, device next. */
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
-- 
1.7.8.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox