mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Asen Chavdarov Dimov <dimov@ronetix.at>
To: barebox@lists.infradead.org
Subject: [PATCH v3 3/4] pm9g45: enable MCI0
Date: Wed, 21 Mar 2012 18:27:25 +0200	[thread overview]
Message-ID: <1332347246-8777-3-git-send-email-dimov@ronetix.at> (raw)
In-Reply-To: <1332347246-8777-1-git-send-email-dimov@ronetix.at>

FIXME: part of or no data is written. File copy ends
with message: "atmel_mci@atmel_mci0: command/data timeout"

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
---
since v1:
	add_device_mci renamed to pm9g45_add_device_mci

since v2:
	- used savedefconfig to minimize the config file
---
 arch/arm/boards/pm9g45/init.c     |   16 ++++++++++++++++
 arch/arm/configs/pm9g45_defconfig |    7 +++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 567bad4..174dd75 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -77,6 +77,21 @@ static void pm_add_device_nand(void)
 	at91_add_device_nand(&nand_pdata);
 }
 
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data __initdata mci_data = {
+	.bus_width	= 4,
+	.wp_pin		= 0,
+	.detect_pin	= AT91_PIN_PD6,
+};
+
+static void pm9g45_add_device_mci(void)
+{
+	at91_add_device_mci(0, &mci_data);
+}
+#else
+static void pm9g45_add_device_mci(void) {}
+#endif
+
 static struct at91_ether_platform_data macb_pdata = {
 	.flags = AT91SAM_ETHER_RMII,
 	.phy_addr = 0,
@@ -104,6 +119,7 @@ mem_initcall(pm9g45_mem_init);
 static int pm9g45_devices_init(void)
 {
 	pm_add_device_nand();
+	pm9g45_add_device_mci();
 	pm9g45_phy_init();
 	at91_add_device_eth(&macb_pdata);
 
diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
index d199abd..8106202 100644
--- a/arch/arm/configs/pm9g45_defconfig
+++ b/arch/arm/configs/pm9g45_defconfig
@@ -4,8 +4,6 @@ CONFIG_AEABI=y
 CONFIG_LONGHELP=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_PARTITION=y
-CONFIG_PARTITION_DISK=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env"
 CONFIG_POLLER=y
@@ -35,4 +33,9 @@ CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
+CONFIG_MCI=y
+CONFIG_MCI_ATMEL=y
 CONFIG_EEPROM_AT25=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
-- 
1.7.4.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-03-21 16:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-01 16:21 [PATCH 1/3] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-01 16:21 ` [PATCH 2/3] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-01 17:10   ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 16:21 ` [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-01 17:12   ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 15:20     ` RONETIX - Asen Dimov
2012-03-02 17:13       ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-01 17:08 ` [PATCH 1/3] pm9g45: fix Ethernet Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55 ` [PATCH v2 1/4] pm9g45: boot from NAND Asen Chavdarov Dimov
2012-03-02 16:55   ` [PATCH v2 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-02 17:19     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55   ` [PATCH v2 3/4] pm9g45: enable MCI0 Asen Chavdarov Dimov
2012-03-02 17:21     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 16:55   ` [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov
2012-03-02 17:22     ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-02 17:18   ` [PATCH v2 1/4] pm9g45: boot from NAND Jean-Christophe PLAGNIOL-VILLARD
2012-03-08 11:37     ` RONETIX - Asen Dimov
2012-03-08 13:05       ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-21 16:43         ` RONETIX - Asen Dimov
2012-03-21 16:27 ` [PATCH v3 " Asen Chavdarov Dimov
2012-03-21 16:27   ` [PATCH v3 2/4] pm9g45: fix Ethernet Asen Chavdarov Dimov
2012-03-21 16:27   ` Asen Chavdarov Dimov [this message]
2012-03-22 20:17     ` [PATCH v3 3/4] pm9g45: enable MCI0 Sascha Hauer
2012-03-23 12:55       ` RONETIX - Asen Dimov
2012-03-23 15:18         ` Sascha Hauer
2012-03-21 16:27   ` [PATCH v3 4/4] pm9g45: enable USB OHCI host and USB mass storage Asen Chavdarov Dimov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1332347246-8777-3-git-send-email-dimov@ronetix.at \
    --to=dimov@ronetix.at \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox