From: "Eric Bénard" <eric@eukrea.com>
To: barebox@lists.infradead.org
Subject: [PATCH 09/16] eukrea_cpuimx35: use switch action to launch usbserial or dfu
Date: Thu, 17 May 2012 17:46:11 +0200 [thread overview]
Message-ID: <1337269578-20570-9-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1337269578-20570-1-git-send-email-eric@eukrea.com>
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/boards/eukrea_cpuimx35/env/bin/init_board | 21 ++++++++++++++++++++
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 10 +++++++-
arch/arm/configs/eukrea_cpuimx35_defconfig | 12 +++++++---
3 files changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board b/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
index cb624e5..7659cc4 100644
--- a/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
+++ b/arch/arm/boards/eukrea_cpuimx35/env/bin/init_board
@@ -11,6 +11,27 @@ elif [ -f /env/logo.bmp.lzo ]; then
gpio_set_value 1 1
fi
+gpio_get_value 89
+if [ $? -eq 0 ]; then
+ gpio_set_value 93 0
+ usbserial
+ timeout -s -a 2
+ gpio_get_value 89
+ if [ $? -eq 0 ]; then
+ usbserial -d
+ dfu -V 0x1234 -P 0x1234 /dev/nand0.barebox.bb(barebox)sr,/dev/nand0.kernel.bb(kernel)r,/dev/nand0.root.bb(root)r
+ gpio_get_value 89
+ if [ $? -eq 0 ]; then
+ usbserial
+ autoboot_timeout=60
+ exit
+ fi
+ reset
+ else
+ autoboot_timeout=28
+ fi
+fi
+
if [ -z $eth0.ethaddr ]; then
while [ -z $eth0.ethaddr ]; do
readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
index 17da569..bfdd9de 100644
--- a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
+++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c
@@ -161,6 +161,12 @@ static int eukrea_cpuimx35_devices_init(void)
imx35_add_i2c0(NULL);
imx35_add_mmc0(NULL);
+ /* led default off */
+ gpio_direction_output(32 * 2 + 29, 1);
+
+ /* Switch : input */
+ gpio_direction_input(32 * 2 + 25);
+
#ifdef CONFIG_USB
imx35_usb_init();
add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
@@ -220,6 +226,8 @@ static struct pad_desc eukrea_cpuimx35_pads[] = {
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+
+ MX35_PAD_LD19__GPIO3_25,
};
static int eukrea_cpuimx35_console_init(void)
@@ -231,8 +239,6 @@ static int eukrea_cpuimx35_console_init(void)
gpio_direction_output(4, 0);
/* backlight default off */
gpio_direction_output(1, 0);
- /* led default off */
- gpio_direction_output(32 * 2 + 29, 1);
imx35_add_uart0();
return 0;
diff --git a/arch/arm/configs/eukrea_cpuimx35_defconfig b/arch/arm/configs/eukrea_cpuimx35_defconfig
index 8a6bb0b..44be126 100644
--- a/arch/arm/configs/eukrea_cpuimx35_defconfig
+++ b/arch/arm/configs/eukrea_cpuimx35_defconfig
@@ -14,6 +14,7 @@ CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_ALL=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
@@ -24,11 +25,13 @@ CONFIG_CMD_SAVEENV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_LOADB=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MTEST=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
@@ -48,12 +51,12 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
-CONFIG_CMD_LED_TRIGGER=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
CONFIG_NET_TFTP=y
CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
CONFIG_DRIVER_NET_FEC_IMX=y
# CONFIG_SPI is not set
CONFIG_I2C=y
@@ -61,6 +64,9 @@ CONFIG_I2C_IMX=y
CONFIG_MTD=y
CONFIG_MTD_RAW_DEVICE=y
CONFIG_NAND=y
+# CONFIG_NAND_ECC_SOFT is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
CONFIG_NAND_IMX=y
CONFIG_USB=y
CONFIG_USB_EHCI=y
@@ -74,8 +80,6 @@ CONFIG_MCI=y
CONFIG_MCI_IMX_ESDHC=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
-CONFIG_LED_TRIGGERS=y
-CONFIG_FS_TFTP=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
--
1.7.7.6
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-05-17 15:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-17 15:46 [PATCH 01/16] eukrea_cpuimx25: workaround ENGcm09152 Eric Bénard
2012-05-17 15:46 ` [PATCH 02/16] eukrea_cpuimx25: add display choice in environment Eric Bénard
2012-05-17 15:46 ` [PATCH 03/16] eukrea_cpuimx25: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 04/16] eukrea_cpuimx35: add display choice in environment Eric Bénard
2012-05-17 15:46 ` [PATCH 05/16] eukrea_cpuimx35: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 06/16] eukrea_cpuimx51: updated env Eric Bénard
2012-05-17 15:46 ` [PATCH 07/16] eukrea_cpuimx51: update defconfig Eric Bénard
2012-05-17 15:46 ` [PATCH 08/16] eukrea_cpuimx25: use switch action to launch usbserial or dfu Eric Bénard
2012-05-17 15:46 ` Eric Bénard [this message]
2012-05-17 15:46 ` [PATCH 10/16] fs/tftp: depend on NET_TFTP Eric Bénard
2012-05-17 17:54 ` Sascha Hauer
2012-05-26 9:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-31 18:24 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 11/16] iim: don't try to set ethaddr when NET is not selected Eric Bénard
2012-05-17 17:40 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 12/16] fec_imx: restart aneg at open and not at init Eric Bénard
2012-05-17 17:36 ` Sascha Hauer
2012-05-17 19:32 ` Eric Bénard
2012-05-18 8:40 ` Sascha Hauer
2012-05-17 15:46 ` [PATCH 13/16] eukrea_cpuimx25: fix PHY address Eric Bénard
2012-05-17 15:46 ` [PATCH 14/16] eukrea_cpuimx35: " Eric Bénard
2012-05-17 17:42 ` Sascha Hauer
2012-05-17 19:33 ` Eric Bénard
2012-05-17 15:46 ` [PATCH 15/16] eukrea_cpuimx25&35: update init_board Eric Bénard
2012-05-17 15:46 ` [PATCH 16/16] eukrea_cpuimx25&35: update defconfig Eric Bénard
2012-05-17 17:45 ` Sascha Hauer
2012-05-17 19:34 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337269578-20570-9-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox