From: Johannes Stezenbach <js@sig21.net>
To: barebox@lists.infradead.org
Subject: [PATCH 6/6] drivers/net: add designware driver
Date: Mon, 18 Jun 2012 16:48:00 +0200 [thread overview]
Message-ID: <1340030880-10062-7-git-send-email-js@sig21.net> (raw)
In-Reply-To: <1340030880-10062-1-git-send-email-js@sig21.net>
Straight forward port of Synopsys Designware ethernet
driver from u-boot v2012.04.01.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
---
drivers/net/Kconfig | 11 ++
drivers/net/Makefile | 1 +
drivers/net/designware.c | 433 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/designware.h | 230 ++++++++++++++++++++++++
include/net/designware.h | 9 +
5 files changed, 684 insertions(+)
create mode 100644 drivers/net/designware.c
create mode 100644 drivers/net/designware.h
create mode 100644 include/net/designware.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 172cc39..ba59715 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -13,6 +13,9 @@ config HAS_AT91_ETHER
config HAS_NETX_ETHER
bool
+config HAS_DESIGNWARE_ETH
+ bool
+
config ARCH_HAS_FEC_IMX
bool
@@ -108,6 +111,14 @@ config DRIVER_NET_KS8851_MLL
This option enables support for the Micrel KS8851 MLL
ethernet chip.
+config DRIVER_NET_DESIGNWARE
+ bool "Designware Universal MAC ethernet driver"
+ select MIIDEV
+ depends on HAS_DESIGNWARE_ETH
+ help
+ This option enables support for the Synopsys
+ Designware Core Univesal MAC 10M/100M/1G ethernet IP.
+
source "drivers/net/usb/Kconfig"
endmenu
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 34dbee9..29727b7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_MIIDEV) += miidev.o
obj-$(CONFIG_NET_USB) += usb/
obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o
obj-$(CONFIG_DRIVER_NET_KS8851_MLL) += ks8851_mll.o
+obj-$(CONFIG_DRIVER_NET_DESIGNWARE) += designware.o
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
new file mode 100644
index 0000000..d9a87b0
--- /dev/null
+++ b/drivers/net/designware.c
@@ -0,0 +1,433 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Designware ethernet IP driver for u-boot
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <net.h>
+#include <miidev.h>
+#include <asm/mmu.h>
+#include <net/designware.h>
+#include "designware.h"
+
+
+struct dw_eth_dev {
+ struct eth_device netdev;
+ struct mii_device miidev;
+
+ void (*fix_mac_speed)(int speed);
+ u8 macaddr[6];
+ u32 tx_currdescnum;
+ u32 rx_currdescnum;
+
+ struct dmamacdescr *tx_mac_descrtable;
+ struct dmamacdescr *rx_mac_descrtable;
+
+ u8 *txbuffs;
+ u8 *rxbuffs;
+
+ struct eth_mac_regs *mac_regs_p;
+ struct eth_dma_regs *dma_regs_p;
+};
+
+/* Speed specific definitions */
+#define SPEED_10M 1
+#define SPEED_100M 2
+#define SPEED_1000M 3
+
+/* Duplex mode specific definitions */
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+static int dwc_ether_mii_read(struct mii_device *dev, int addr, int reg)
+{
+ struct dw_eth_dev *priv = dev->edev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u64 start;
+ u32 miiaddr;
+
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK);
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ start = get_time_ns();
+ while (readl(&mac_p->miiaddr) & MII_BUSY) {
+ if (is_timeout(start, 10 * MSECOND)) {
+ dev_err(&priv->netdev.dev, "MDIO timeout\n");
+ return -EIO;
+ }
+ udelay(10);
+ }
+ return readl(&mac_p->miidata) & 0xffff;
+}
+
+static int dwc_ether_mii_write(struct mii_device *dev, int addr, int reg, int val)
+{
+ struct dw_eth_dev *priv = dev->edev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u64 start;
+ u32 miiaddr;
+
+ writel(val, &mac_p->miidata);
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ start = get_time_ns();
+ while (readl(&mac_p->miiaddr) & MII_BUSY) {
+ if (is_timeout(start, 10 * MSECOND)) {
+ dev_err(&priv->netdev.dev, "MDIO timeout\n");
+ return -EIO;
+ }
+ udelay(10);
+ }
+
+ /* Needed as a fix for ST-Phy */
+ dwc_ether_mii_read(dev, addr, reg);
+ return 0;
+}
+
+
+static int mac_reset(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u64 start;
+
+ writel(DMAMAC_SRST, &dma_p->busmode);
+ writel(MII_PORTSELECT, &mac_p->conf);
+
+ start = get_time_ns();
+ while (readl(&dma_p->busmode) & DMAMAC_SRST) {
+ if (is_timeout(start, 10 * MSECOND)) {
+ dev_err(&priv->netdev.dev, "MAC reset timeout\n");
+ return -EIO;
+ }
+ udelay(10);
+ }
+ return 0;
+}
+
+static void tx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
+ char *txbuffs = &priv->txbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
+ DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
+ DESC_TXSTS_TXCHECKINSCTRL | \
+ DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
+
+ desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
+ desc_p->dmamac_cntl = 0;
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
+#else
+ desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
+ desc_p->txrx_status = 0;
+#endif
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
+}
+
+static void rx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
+ char *rxbuffs = &priv->rxbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+ desc_p->dmamac_cntl =
+ (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
+ DESC_RXCTRL_RXCHAIN;
+
+ desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
+}
+
+static void descs_init(struct eth_device *dev)
+{
+ tx_descs_init(dev);
+ rx_descs_init(dev);
+}
+
+static int dwc_ether_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+
+ if (mac_reset(dev) < 0)
+ return -1;
+
+ /* HW MAC address is lost during MAC reset */
+ dev->set_ethaddr(dev, priv->macaddr);
+
+ writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode);
+ writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
+ writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
+ writel(FRAMEBURSTENABLE | DISABLERXOWN, &mac_p->conf);
+ return 0;
+}
+
+static int dwc_ether_open(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 conf;
+ int link, speed;
+
+ miidev_wait_aneg(&priv->miidev);
+ miidev_print_status(&priv->miidev);
+ link = miidev_get_status(&priv->miidev);
+
+ if (priv->fix_mac_speed) {
+ speed = link & MIIDEV_STATUS_IS_1000MBIT ? 1000 :
+ (link & MIIDEV_STATUS_IS_100MBIT ? 100 : 10);
+ priv->fix_mac_speed(speed);
+ }
+
+ conf = readl(&mac_p->conf);
+ if (link & MIIDEV_STATUS_IS_FULL_DUPLEX)
+ conf |= FULLDPLXMODE;
+ else
+ conf &= ~FULLDPLXMODE;
+ if (link & MIIDEV_STATUS_IS_1000MBIT)
+ conf &= ~MII_PORTSELECT;
+ else
+ conf |= MII_PORTSELECT;
+ writel(conf, &mac_p->conf);
+
+ descs_init(dev);
+
+ /*
+ * Start/Enable xfer at dma as well as mac level
+ */
+ writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
+ writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
+ writel(readl(&mac_p->conf) | RXENABLE | TXENABLE, &mac_p->conf);
+ return 0;
+}
+
+static int dwc_ether_send(struct eth_device *dev, void *packet, int length)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 desc_num = priv->tx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
+
+ /* Check if the descriptor is owned by CPU */
+ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
+ dev_err(&dev->dev, "CPU not owner of tx frame\n");
+ return -1;
+ }
+
+ memcpy((void *)desc_p->dmamac_addr, packet, length);
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
+ desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK;
+
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
+ desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
+#else
+ desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
+ DESC_TXCTRL_TXFIRST;
+
+ desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
+#endif
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_TX_DESCR_NUM)
+ desc_num = 0;
+
+ priv->tx_currdescnum = desc_num;
+
+ /* Start the transmission */
+ writel(POLL_DATA, &dma_p->txpolldemand);
+ return 0;
+}
+
+static int dwc_ether_rx(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ u32 desc_num = priv->rx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
+
+ u32 status = desc_p->txrx_status;
+ int length = 0;
+
+ /* Check if the owner is the CPU */
+ if (status & DESC_RXSTS_OWNBYDMA)
+ return 0;
+
+ length = (status & DESC_RXSTS_FRMLENMSK) >> \
+ DESC_RXSTS_FRMLENSHFT;
+
+ net_receive(desc_p->dmamac_addr, length);
+
+ /*
+ * Make the current descriptor valid again and go to
+ * the next one
+ */
+ desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_RX_DESCR_NUM)
+ desc_num = 0;
+
+ priv->rx_currdescnum = desc_num;
+
+ return length;
+}
+
+static void dwc_ether_halt (struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+
+ mac_reset(dev);
+ priv->tx_currdescnum = priv->rx_currdescnum = 0;
+}
+
+static int dwc_ether_get_ethaddr(struct eth_device *dev, u8 adr[6])
+{
+ /* we have no EEPROM */
+ return -1;
+}
+
+static int dwc_ether_set_ethaddr(struct eth_device *dev, u8 adr[6])
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 macid_lo, macid_hi;
+
+ macid_lo = adr[0] + (adr[1] << 8) + \
+ (adr[2] << 16) + (adr[3] << 24);
+ macid_hi = adr[4] + (adr[5] << 8);
+ writel(macid_hi, &mac_p->macaddr0hi);
+ writel(macid_lo, &mac_p->macaddr0lo);
+ memcpy(priv->macaddr, adr, 6);
+ return 0;
+}
+
+static int dwc_ether_probe(struct device_d *dev)
+{
+ struct dw_eth_dev *priv;
+ struct eth_device *edev;
+ struct mii_device *miidev;
+ void __iomem *base;
+ struct dwc_ether_platform_data *pdata = dev->platform_data;
+
+ if (!pdata) {
+ printf("dwc_ether: no platform_data\n");
+ return -ENODEV;
+ }
+
+ priv = xzalloc(sizeof(struct dw_eth_dev));
+
+ base = dev_request_mem_region(dev, 0);
+ priv->mac_regs_p = base;
+ dev_info(dev, "MAC version %08x\n", readl(&priv->mac_regs_p->version));
+ priv->dma_regs_p = base + DW_DMA_BASE_OFFSET;
+ priv->tx_mac_descrtable = dma_alloc_coherent(
+ CONFIG_TX_DESCR_NUM * sizeof(struct dmamacdescr));
+ priv->rx_mac_descrtable = dma_alloc_coherent(
+ CONFIG_RX_DESCR_NUM * sizeof(struct dmamacdescr));
+ priv->txbuffs = dma_alloc_coherent(TX_TOTAL_BUFSIZE);
+ priv->rxbuffs = dma_alloc_coherent(RX_TOTAL_BUFSIZE);
+ priv->fix_mac_speed = pdata->fix_mac_speed;
+
+ edev = &priv->netdev;
+ miidev = &priv->miidev;
+ edev->priv = priv;
+
+ edev->init = dwc_ether_init;
+ edev->open = dwc_ether_open;
+ edev->send = dwc_ether_send;
+ edev->recv = dwc_ether_rx;
+ edev->halt = dwc_ether_halt;
+ edev->get_ethaddr = dwc_ether_get_ethaddr;
+ edev->set_ethaddr = dwc_ether_set_ethaddr;
+
+ miidev->address = pdata->phy_addr;
+ miidev->read = dwc_ether_mii_read;
+ miidev->write = dwc_ether_mii_write;
+ miidev->edev = edev;
+
+ mii_register(miidev);
+ eth_register(edev);
+ return 0;
+}
+
+static void dwc_ether_remove(struct device_d *dev)
+{
+}
+
+static struct driver_d dwc_ether_driver = {
+ .name = "designware_eth",
+ .probe = dwc_ether_probe,
+ .remove = dwc_ether_remove,
+};
+
+static int dwc_ether_driver_init(void)
+{
+ register_driver(&dwc_ether_driver);
+ return 0;
+}
+device_initcall(dwc_ether_driver_init);
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
new file mode 100644
index 0000000..d28c52a
--- /dev/null
+++ b/drivers/net/designware.h
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DESIGNWARE_ETH_H
+#define __DESIGNWARE_ETH_H
+
+#define CONFIG_TX_DESCR_NUM 16
+#define CONFIG_RX_DESCR_NUM 16
+#define CONFIG_ETH_BUFSIZE 2048
+#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
+#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
+
+struct eth_mac_regs {
+ u32 conf; /* 0x00 */
+ u32 framefilt; /* 0x04 */
+ u32 hashtablehigh; /* 0x08 */
+ u32 hashtablelow; /* 0x0c */
+ u32 miiaddr; /* 0x10 */
+ u32 miidata; /* 0x14 */
+ u32 flowcontrol; /* 0x18 */
+ u32 vlantag; /* 0x1c */
+ u32 version; /* 0x20 */
+ u8 reserved_1[20];
+ u32 intreg; /* 0x38 */
+ u32 intmask; /* 0x3c */
+ u32 macaddr0hi; /* 0x40 */
+ u32 macaddr0lo; /* 0x44 */
+};
+
+/* MAC configuration register definitions */
+#define FRAMEBURSTENABLE (1 << 21)
+#define MII_PORTSELECT (1 << 15)
+#define FES_100 (1 << 14)
+#define DISABLERXOWN (1 << 13)
+#define FULLDPLXMODE (1 << 11)
+#define RXENABLE (1 << 2)
+#define TXENABLE (1 << 3)
+
+/* MII address register definitions */
+#define MII_BUSY (1 << 0)
+#define MII_WRITE (1 << 1)
+#define MII_CLKRANGE_60_100M (0)
+#define MII_CLKRANGE_100_150M (0x4)
+#define MII_CLKRANGE_20_35M (0x8)
+#define MII_CLKRANGE_35_60M (0xC)
+#define MII_CLKRANGE_150_250M (0x10)
+#define MII_CLKRANGE_250_300M (0x14)
+
+#define MIIADDRSHIFT (11)
+#define MIIREGSHIFT (6)
+#define MII_REGMSK (0x1F << 6)
+#define MII_ADDRMSK (0x1F << 11)
+
+
+struct eth_dma_regs {
+ u32 busmode; /* 0x00 */
+ u32 txpolldemand; /* 0x04 */
+ u32 rxpolldemand; /* 0x08 */
+ u32 rxdesclistaddr; /* 0x0c */
+ u32 txdesclistaddr; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 opmode; /* 0x18 */
+ u32 intenable; /* 0x1c */
+ u8 reserved[40];
+ u32 currhosttxdesc; /* 0x48 */
+ u32 currhostrxdesc; /* 0x4c */
+ u32 currhosttxbuffaddr; /* 0x50 */
+ u32 currhostrxbuffaddr; /* 0x54 */
+};
+
+#define DW_DMA_BASE_OFFSET (0x1000)
+
+/* Bus mode register definitions */
+#define FIXEDBURST (1 << 16)
+#define PRIORXTX_41 (3 << 14)
+#define PRIORXTX_31 (2 << 14)
+#define PRIORXTX_21 (1 << 14)
+#define PRIORXTX_11 (0 << 14)
+#define BURST_1 (1 << 8)
+#define BURST_2 (2 << 8)
+#define BURST_4 (4 << 8)
+#define BURST_8 (8 << 8)
+#define BURST_16 (16 << 8)
+#define BURST_32 (32 << 8)
+#define RXHIGHPRIO (1 << 1)
+#define DMAMAC_SRST (1 << 0)
+
+/* Poll demand definitions */
+#define POLL_DATA (0xFFFFFFFF)
+
+/* Operation mode definitions */
+#define STOREFORWARD (1 << 21)
+#define FLUSHTXFIFO (1 << 20)
+#define TXSTART (1 << 13)
+#define TXSECONDFRAME (1 << 2)
+#define RXSTART (1 << 1)
+
+/* Descriptior related definitions */
+#define MAC_MAX_FRAME_SZ (1600)
+
+struct dmamacdescr {
+ u32 txrx_status;
+ u32 dmamac_cntl;
+ void *dmamac_addr;
+ struct dmamacdescr *dmamac_next;
+};
+
+/*
+ * txrx_status definitions
+ */
+
+/* tx status bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_TXINT (1 << 30)
+#define DESC_TXSTS_TXLAST (1 << 29)
+#define DESC_TXSTS_TXFIRST (1 << 28)
+#define DESC_TXSTS_TXCRCDIS (1 << 27)
+
+#define DESC_TXSTS_TXPADDIS (1 << 26)
+#define DESC_TXSTS_TXCHECKINSCTRL (3 << 22)
+#define DESC_TXSTS_TXRINGEND (1 << 21)
+#define DESC_TXSTS_TXCHAIN (1 << 20)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#else
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#endif
+
+/* rx status bits definitions */
+#define DESC_RXSTS_OWNBYDMA (1 << 31)
+#define DESC_RXSTS_DAFILTERFAIL (1 << 30)
+#define DESC_RXSTS_FRMLENMSK (0x3FFF << 16)
+#define DESC_RXSTS_FRMLENSHFT (16)
+
+#define DESC_RXSTS_ERROR (1 << 15)
+#define DESC_RXSTS_RXTRUNCATED (1 << 14)
+#define DESC_RXSTS_SAFILTERFAIL (1 << 13)
+#define DESC_RXSTS_RXIPC_GIANTFRAME (1 << 12)
+#define DESC_RXSTS_RXDAMAGED (1 << 11)
+#define DESC_RXSTS_RXVLANTAG (1 << 10)
+#define DESC_RXSTS_RXFIRST (1 << 9)
+#define DESC_RXSTS_RXLAST (1 << 8)
+#define DESC_RXSTS_RXIPC_GIANT (1 << 7)
+#define DESC_RXSTS_RXCOLLISION (1 << 6)
+#define DESC_RXSTS_RXFRAMEETHER (1 << 5)
+#define DESC_RXSTS_RXWATCHDOG (1 << 4)
+#define DESC_RXSTS_RXMIIERROR (1 << 3)
+#define DESC_RXSTS_RXDRIBBLING (1 << 2)
+#define DESC_RXSTS_RXCRC (1 << 1)
+
+/*
+ * dmamac_cntl definitions
+ */
+
+/* tx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_TXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_TXCTRL_TXINT (1 << 31)
+#define DESC_TXCTRL_TXLAST (1 << 30)
+#define DESC_TXCTRL_TXFIRST (1 << 29)
+#define DESC_TXCTRL_TXCHECKINSCTRL (3 << 27)
+#define DESC_TXCTRL_TXCRCDIS (1 << 26)
+#define DESC_TXCTRL_TXRINGEND (1 << 25)
+#define DESC_TXCTRL_TXCHAIN (1 << 24)
+
+#define DESC_TXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_TXCTRL_SIZE2SHFT (11)
+
+#endif
+
+/* rx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 15)
+#define DESC_RXCTRL_RXCHAIN (1 << 14)
+
+#define DESC_RXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_RXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 25)
+#define DESC_RXCTRL_RXCHAIN (1 << 24)
+
+#define DESC_RXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_RXCTRL_SIZE2SHFT (11)
+
+#endif
+
+#endif
diff --git a/include/net/designware.h b/include/net/designware.h
new file mode 100644
index 0000000..3f9f5b9
--- /dev/null
+++ b/include/net/designware.h
@@ -0,0 +1,9 @@
+#ifndef __DWC_UNIMAC_H
+#define __DWC_UNIMAC_H
+
+struct dwc_ether_platform_data {
+ u8 phy_addr;
+ void (*fix_mac_speed)(int speed);
+};
+
+#endif
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-06-18 14:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 14:47 [PATCH 0/6] misc ethernet fixes and new driver Johannes Stezenbach
2012-06-18 14:47 ` [PATCH 1/6] miidev: fix auto negotiation Johannes Stezenbach
2012-06-18 17:52 ` Roberto Nibali
2012-06-18 19:26 ` Johannes Stezenbach
2012-06-18 14:47 ` [PATCH 2/6] miidev: actually probe the PHY Johannes Stezenbach
2012-06-18 18:27 ` Roberto Nibali
2012-06-18 19:39 ` Johannes Stezenbach
2012-06-18 14:47 ` [PATCH 3/6] miidev: add support for 1000Mbit Johannes Stezenbach
2012-06-18 14:47 ` [PATCH 4/6] miidev: consistent md and mw on phy regs Johannes Stezenbach
2012-06-20 6:49 ` Sascha Hauer
2012-06-18 14:47 ` [PATCH 5/6] eth: eth MAC addresses are six bytes Johannes Stezenbach
2012-06-18 14:48 ` Johannes Stezenbach [this message]
2012-06-20 7:13 ` [PATCH 6/6] drivers/net: add designware driver Sascha Hauer
2012-06-20 8:11 ` Johannes Stezenbach
2012-06-20 8:41 ` Sascha Hauer
2012-06-20 7:15 ` [PATCH 0/6] misc ethernet fixes and new driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340030880-10062-7-git-send-email-js@sig21.net \
--to=js@sig21.net \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox