mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/12] board hmi10: add default config
Date: Tue, 26 Jun 2012 11:51:54 +0200	[thread overview]
Message-ID: <1340704314-12593-13-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1340704314-12593-1-git-send-email-jlu@pengutronix.de>

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 arch/arm/configs/hmi10_defconfig |   59 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 arch/arm/configs/hmi10_defconfig

diff --git a/arch/arm/configs/hmi10_defconfig b/arch/arm/configs/hmi10_defconfig
new file mode 100644
index 0000000..ce0ef26
--- /dev/null
+++ b/arch/arm/configs/hmi10_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARCH_DAVINCI=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x800000
+CONFIG_KALLSYMS=y
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/hmi10/env"
+CONFIG_POLLER=y
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GLOBAL=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SPI_DAVINCI=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_DAVINCI=y
+CONFIG_USB=y
+CONFIG_USB_OHCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIDEO=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_LZO_DECOMPRESS=y
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-06-26  9:52 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-26  9:51 Add basic support for the OMAP-L138/DA850 Jan Luebbe
2012-06-26  9:51 ` [PATCH 01/12] mach-davinci: add platform and minimal board file for HMI10 Jan Luebbe
2012-06-26  9:51 ` [PATCH 02/12] mach-davinci: add GPIO support Jan Luebbe
2012-06-26  9:51 ` [PATCH 03/12] mach-davinci: add pin mux support Jan Luebbe
2012-06-26 18:59   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 04/12] mach-davinci: setup pin mux for da850 Jan Luebbe
2012-06-26 19:00   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller) Jan Luebbe
2012-06-26 19:02   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI) Jan Luebbe
2012-06-26 19:05   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 07/12] mach-davinci: add support for AEMIF (NAND flash) Jan Luebbe
2012-06-26  9:51 ` [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller Jan Luebbe
2012-06-26 19:19   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 09/12] board hmi10: enable support for NAND Jan Luebbe
2012-06-26  9:51 ` [PATCH 10/12] drivers/spi: add driver for the davinci SPI master Jan Luebbe
2012-06-26  9:51 ` [PATCH 11/12] board hmi10: enable support for SPI Jan Luebbe
2012-06-26  9:51 ` Jan Luebbe [this message]
2012-06-26 11:59 ` Add basic support for the OMAP-L138/DA850 Yegor Yefremov
2012-06-26 12:06   ` Jan Lübbe
2012-06-26 20:52     ` Yegor Yefremov
2012-06-29 11:42       ` [PATCH] Initial BeagleBone support for second stage Jan Luebbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340704314-12593-13-git-send-email-jlu@pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox