mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Jan Lübbe" <jlu@pengutronix.de>
To: Yegor Yefremov <yegorslists@googlemail.com>
Cc: barebox@lists.infradead.org
Subject: Re: Add basic support for the OMAP-L138/DA850
Date: Tue, 26 Jun 2012 14:06:53 +0200	[thread overview]
Message-ID: <1340712413.15660.5.camel@coredoba.hi.pengutronix.de> (raw)
In-Reply-To: <CAGm1_kvHqr_RiqUkB6ue_bO7Sj3u=jVUKmM9t9Fw-Z_=Sw=ryQ@mail.gmail.com>

On Tue, 2012-06-26 at 13:59 +0200, Yegor Yefremov wrote:
> > this series introduces a new ARM machine 'davinci' and adds support
> > for UART, pin mux, power/clock, USB 1.1, NAND and SPI. Included is
> > support for the HMI10 system which was used to develop and test this
> > series.
> >
> > A second series adding ethernet (EMAC) and display (LCDC) support
> > will be submitted when this is accepted.
> 
> do you also have am335x system? AFAIK they both share same IP blocks.

I have a BeagleBone, which uses an AM3359. So far it seems that it is
closer to the OMAP3530 (beagleboard) than to the L138. The AM3505 shares
the EMAC core with the L138 and the AM1808 should be nearly identical to
the L138.

I've got a simple hack which allows loading barebox on a BeagleBone from
U-Boot's SPL (MUX and clocking is missing). You can use it to load a
kernel from SD and boot it.

Best regards,
Jan

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-06-26 12:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-26  9:51 Jan Luebbe
2012-06-26  9:51 ` [PATCH 01/12] mach-davinci: add platform and minimal board file for HMI10 Jan Luebbe
2012-06-26  9:51 ` [PATCH 02/12] mach-davinci: add GPIO support Jan Luebbe
2012-06-26  9:51 ` [PATCH 03/12] mach-davinci: add pin mux support Jan Luebbe
2012-06-26 18:59   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 04/12] mach-davinci: setup pin mux for da850 Jan Luebbe
2012-06-26 19:00   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 05/12] mach-davinci: add support for the PSC (Power and Sleep Controller) Jan Luebbe
2012-06-26 19:02   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 06/12] mach-davinci: support the USB 1.1 host controller (based on OHCI) Jan Luebbe
2012-06-26 19:05   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 07/12] mach-davinci: add support for AEMIF (NAND flash) Jan Luebbe
2012-06-26  9:51 ` [PATCH 08/12] drivers/mtd/nand: add driver for the davinci NAND flash controller Jan Luebbe
2012-06-26 19:19   ` Sascha Hauer
2012-06-26  9:51 ` [PATCH 09/12] board hmi10: enable support for NAND Jan Luebbe
2012-06-26  9:51 ` [PATCH 10/12] drivers/spi: add driver for the davinci SPI master Jan Luebbe
2012-06-26  9:51 ` [PATCH 11/12] board hmi10: enable support for SPI Jan Luebbe
2012-06-26  9:51 ` [PATCH 12/12] board hmi10: add default config Jan Luebbe
2012-06-26 11:59 ` Add basic support for the OMAP-L138/DA850 Yegor Yefremov
2012-06-26 12:06   ` Jan Lübbe [this message]
2012-06-26 20:52     ` Yegor Yefremov
2012-06-29 11:42       ` [PATCH] Initial BeagleBone support for second stage Jan Luebbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340712413.15660.5.camel@coredoba.hi.pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=yegorslists@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox