From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Cc: wsa@pengutronix.de
Subject: [PATCH] ARM mxs: Clear USB boot mode during startup
Date: Fri, 29 Jun 2012 14:54:02 +0200 [thread overview]
Message-ID: <1340974442-1687-1-git-send-email-s.hauer@pengutronix.de> (raw)
When the i.MX28 boots from USB, the ROM code sets this bit. When
after a reset the ROM code detects that this bit is set it will
boot from USB again. This means that if we boot once from USB the
chip will continue to boot from USB until the next power cycle.
To prevent this (and boot from the configured bootsource instead)
clear this bit here. This bit is not documented in the datasheets,
it was figured out the hard way. Whether this is the same on i.MX23
is currently not known.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/imx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/mach-mxs/imx.c b/arch/arm/mach-mxs/imx.c
index c64f23c..63b8889 100644
--- a/arch/arm/mach-mxs/imx.c
+++ b/arch/arm/mach-mxs/imx.c
@@ -20,6 +20,32 @@
#include <common.h>
#include <command.h>
#include <complete.h>
+#include <init.h>
+#include <io.h>
+#include <mach/imx-regs.h>
+
+#define HW_RTC_PERSISTENT1 0x070
+
+static int imx_reset_usb_bootstrap(void)
+{
+ /*
+ * Clear USB boot mode.
+ *
+ * When the i.MX28 boots from USB, the ROM code sets this bit. When
+ * after a reset the ROM code detects that this bit is set it will
+ * boot from USB again. This means that if we boot once from USB the
+ * chip will continue to boot from USB until the next power cycle.
+ *
+ * To prevent this (and boot from the configured bootsource instead)
+ * clear this bit here. This bit is not documented in the datasheets,
+ * it was figured out the hard way. Whether this is the same on i.MX23
+ * is currently not known.
+ */
+ writel(0x2, IMX_WDT_BASE + HW_RTC_PERSISTENT1 + BIT_CLR);
+
+ return 0;
+}
+device_initcall(imx_reset_usb_bootstrap);
extern void imx_dump_clocks(void);
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-06-29 12:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-29 12:54 Sascha Hauer [this message]
2012-06-29 13:07 ` Juergen Beisert
2012-07-04 7:15 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340974442-1687-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=wsa@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox