From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 18/30] ARM: remove mx1ads leftovers
Date: Thu, 5 Jul 2012 21:36:48 +0200 [thread overview]
Message-ID: <1341517020-5581-18-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1341517020-5581-1-git-send-email-s.hauer@pengutronix.de>
We have no mx1ads support in the tree, so remove the remaining bits from
Kconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Makefile | 1 -
arch/arm/mach-imx/Kconfig | 7 -------
2 files changed, 8 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1225df7..b2f4ce6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,6 @@ board-$(CONFIG_MACH_IMX21ADS) := imx21ads
board-$(CONFIG_MACH_IMX27ADS) := imx27ads
board-$(CONFIG_MACH_MIOA701) := mioa701
board-$(CONFIG_MACH_MMCCPU) := mmccpu
-board-$(CONFIG_MACH_MX1ADS) := mx1ads
board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
board-$(CONFIG_MACH_NXDB500) := netx
board-$(CONFIG_MACH_OMAP343xSDP) := omap343xdsp
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5b77245..aa4ab7b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -6,7 +6,6 @@ config ARCH_TEXT_BASE
default 0xa0000000 if MACH_EUKREA_CPUIMX27
default 0x87f00000 if MACH_EUKREA_CPUIMX35
default 0x97f00000 if MACH_EUKREA_CPUIMX51SD
- default 0x08f00000 if MACH_MX1ADS
default 0xc0000000 if MACH_IMX21ADS
default 0xa0000000 if MACH_IMX27ADS
default 0x83f00000 if MACH_FREESCALE_MX25_3STACK && FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2
@@ -186,12 +185,6 @@ choice
prompt "i.MX1 Board Type"
-config MACH_MX1ADS
- bool "mx1ads"
- select HAS_CS8900
- help
- Say Y here if you are using the Motorola MX1ADS board
-
config MACH_SCB9328
bool "Synertronixx scb9328"
select HAS_DM9000
--
1.7.10
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-07-05 19:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 19:36 [PATCH 01/30] USB: Fix typo tranceiver -> transceiver Sascha Hauer
2012-07-05 19:36 ` [PATCH 02/30] ARM: let armlinux_set_* depend on the correct option Sascha Hauer
2012-07-05 19:36 ` [PATCH 03/30] bootm: Fix undefined reference to of_fix_tree Sascha Hauer
2012-07-05 19:36 ` [PATCH 04/30] uimage: introduce UIMAGE Kconfig symbol Sascha Hauer
2012-07-05 19:36 ` [PATCH 05/30] ARM at91rm9200: Add missing include Sascha Hauer
2012-07-05 19:36 ` [PATCH 06/30] Add missing semicolons at end of EXPORT_SYMBOL Sascha Hauer
2012-07-05 19:36 ` [PATCH 07/30] exec command: Fix compilation Sascha Hauer
2012-07-05 19:36 ` [PATCH 08/30] input gpio buttons: needs poller API Sascha Hauer
2012-07-05 19:36 ` [PATCH 09/30] loadb: fix compilation Sascha Hauer
2012-07-05 19:36 ` [PATCH 10/30] mfd TWL4030: Fix Kconfig dependencies Sascha Hauer
2012-07-05 19:36 ` [PATCH 11/30] pwm PXA: Compile only on PXA Sascha Hauer
2012-07-05 19:36 ` [PATCH 12/30] fs nfs: depend on net Sascha Hauer
2012-07-05 19:36 ` [PATCH 13/30] mtd nand: Fix compilation without bbt support Sascha Hauer
2012-07-05 19:36 ` [PATCH 14/30] led: remove gpio include Sascha Hauer
2012-07-05 19:36 ` [PATCH 15/30] kconfig: fix IS_ENABLED to not require all options to be defined Sascha Hauer
2012-07-05 19:36 ` [PATCH 16/30] ARM Samsung S5P: Disable support until we have a board Sascha Hauer
2012-07-05 19:36 ` [PATCH 17/30] gpio: add static inlines for gpio_request/gpio_free Sascha Hauer
2012-07-05 19:36 ` Sascha Hauer [this message]
2012-07-05 19:36 ` [PATCH 19/30] usb gadget at91: Use correct include Sascha Hauer
2012-07-05 19:36 ` [PATCH 20/30] usb gadget: Enable gadget support only when a driver is available Sascha Hauer
2012-07-05 19:36 ` [PATCH 21/30] ARM i.MX: rename internal-nand-boot.c to external-nand-boot.c Sascha Hauer
2012-07-05 19:36 ` [PATCH 22/30] ARM i.MX: No external NAND boot on i.MX1 Sascha Hauer
2012-07-05 19:36 ` [PATCH 23/30] mtd: remove dead disk-on-chip support Sascha Hauer
2012-07-05 19:36 ` [PATCH 24/30] mtd omap: add prefix to omap specific decode_bch function Sascha Hauer
2012-07-05 19:36 ` [PATCH 25/30] ARM at91: remove const Sascha Hauer
2012-07-05 19:36 ` [PATCH 26/30] ARM at91: fix typo in define Sascha Hauer
2012-07-05 19:36 ` [PATCH 27/30] uimage: select uncompress and crc32 support Sascha Hauer
2012-07-05 19:36 ` [PATCH 28/30] I2C i.MX: disable driver for i.MX1 Sascha Hauer
2012-07-05 19:36 ` [PATCH 29/30] mtd: scan_write_bbt is only needed with mtd write support Sascha Hauer
2012-07-05 19:37 ` [PATCH 30/30] UBI: select crc32 support Sascha Hauer
2012-07-06 7:37 ` [PATCH 01/30] USB: Fix typo tranceiver -> transceiver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341517020-5581-18-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox