From: Jan Weitzel <j.weitzel@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/3] OMAP4460: clock init
Date: Mon, 13 Aug 2012 08:07:27 +0200 [thread overview]
Message-ID: <1344838047-19069-1-git-send-email-j.weitzel@phytec.de> (raw)
In-Reply-To: <20120803165744.GE24458@pengutronix.de>
Change clock init to allow early gpio access. Add support for 4460 clocks.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
---
v2: fix omap4_scale_vcores for phycard-a-xl2
arch/arm/boards/panda/lowlevel.c | 4 ++-
arch/arm/boards/panda/mux.c | 8 +++++
arch/arm/boards/pcm049/lowlevel.c | 15 +++++++--
arch/arm/boards/pcm049/mux.c | 8 +++++
arch/arm/boards/phycard-a-xl2/lowlevel.c | 13 ++++++--
arch/arm/boards/phycard-a-xl2/mux.c | 8 +++++
arch/arm/mach-omap/include/mach/omap4-clock.h | 4 ++
arch/arm/mach-omap/omap4_clock.c | 39 +++++++++++++++++-------
8 files changed, 79 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boards/panda/lowlevel.c b/arch/arm/boards/panda/lowlevel.c
index 8591fff..0b4b199 100644
--- a/arch/arm/boards/panda/lowlevel.c
+++ b/arch/arm/boards/panda/lowlevel.c
@@ -28,6 +28,8 @@
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
+#define TPS62361_VSEL0_GPIO 7
+
void set_muxconf_regs(void);
static const struct ddr_regs ddr_regs_400_mhz_2cs = {
@@ -70,7 +72,7 @@ static void noinline panda_init_lowlevel(void)
omap4_ddr_init(&ddr_regs_400_mhz_2cs, &core);
/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
- omap4_scale_vcores();
+ omap4_scale_vcores(TPS62361_VSEL0_GPIO);
board_init_lowlevel_return();
}
diff --git a/arch/arm/boards/panda/mux.c b/arch/arm/boards/panda/mux.c
index 310e433..3783006 100644
--- a/arch/arm/boards/panda/mux.c
+++ b/arch/arm/boards/panda/mux.c
@@ -3,6 +3,7 @@
#include <io.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-mux.h>
+#include <mach/omap4-clock.h>
static const struct pad_conf_entry core_padconf_array[] = {
{ GPMC_AD0, PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1 /* sdmmc2_dat0 */ },
@@ -245,4 +246,11 @@ void set_muxconf_regs(void)
omap4_do_set_mux(OMAP44XX_CONTROL_PADCONF_WKUP, wkup_padconf_array,
ARRAY_SIZE(wkup_padconf_array));
+
+ /* gpio_wk7 is used for controlling TPS on 4460 */
+ if (omap4_revision() >= OMAP4460_ES1_0) {
+ writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + PAD1_FREF_CLK4_REQ);
+ /* Enable GPIO-1 clocks before TPS initialization */
+ omap4_enable_gpio1_wup_clocks();
+ }
}
diff --git a/arch/arm/boards/pcm049/lowlevel.c b/arch/arm/boards/pcm049/lowlevel.c
index 5b91098..65a29ec 100644
--- a/arch/arm/boards/pcm049/lowlevel.c
+++ b/arch/arm/boards/pcm049/lowlevel.c
@@ -28,6 +28,8 @@
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
+#define TPS62361_VSEL0_GPIO 182
+
void set_muxconf_regs(void);
static const struct ddr_regs ddr_regs_mt42L64M64_25_400_mhz = {
@@ -46,7 +48,8 @@ static const struct ddr_regs ddr_regs_mt42L64M64_25_400_mhz = {
static void noinline pcm049_init_lowlevel(void)
{
struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
- struct dpll_param mpu = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
+ struct dpll_param mpu44xx = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
+ struct dpll_param mpu4460 = OMAP4_MPU_DPLL_PARAM_19M2_MPU920;
struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
@@ -57,12 +60,16 @@ static void noinline pcm049_init_lowlevel(void)
omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
- omap4_scale_vcores();
+ omap4_scale_vcores(TPS62361_VSEL0_GPIO);
writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);
/* Configure all DPLL's at 100% OPP */
- omap4_configure_mpu_dpll(&mpu);
+ if (omap4_revision() < OMAP4460_ES1_0)
+ omap4_configure_mpu_dpll(&mpu44xx);
+ else
+ omap4_configure_mpu_dpll(&mpu4460);
+
omap4_configure_iva_dpll(&iva);
omap4_configure_per_dpll(&per);
omap4_configure_abe_dpll(&abe);
@@ -88,7 +95,7 @@ void board_init_lowlevel(void)
return;
r = 0x4030d000;
- __asm__ __volatile__("mov sp, %0" : : "r"(r));
+ __asm__ __volatile__("mov sp, %0" : : "r"(r));
pcm049_init_lowlevel();
}
diff --git a/arch/arm/boards/pcm049/mux.c b/arch/arm/boards/pcm049/mux.c
index a7a77b5..04e1d67 100644
--- a/arch/arm/boards/pcm049/mux.c
+++ b/arch/arm/boards/pcm049/mux.c
@@ -3,6 +3,7 @@
#include <io.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-mux.h>
+#include <mach/omap4-clock.h>
static const struct pad_conf_entry core_padconf_array[] = {
{GPMC_AD0, (IEN | PTD | DIS | M0)}, /* gpmc_ad0 */
@@ -242,4 +243,11 @@ void set_muxconf_regs(void)
omap4_do_set_mux(OMAP44XX_CONTROL_PADCONF_WKUP, wkup_padconf_array,
ARRAY_SIZE(wkup_padconf_array));
+
+ /* gpio_182 is used for controlling TPS on 4460 */
+ if (omap4_revision() >= OMAP4460_ES1_0) {
+ writew(M3, OMAP44XX_CONTROL_PADCONF_CORE + FREF_CLK2_OUT);
+ /* Enable GPIO-1 clocks before TPS initialization */
+ omap4_enable_gpio_clocks();
+ }
}
diff --git a/arch/arm/boards/phycard-a-xl2/lowlevel.c b/arch/arm/boards/phycard-a-xl2/lowlevel.c
index b8de2aa..38f80c9 100644
--- a/arch/arm/boards/phycard-a-xl2/lowlevel.c
+++ b/arch/arm/boards/phycard-a-xl2/lowlevel.c
@@ -28,6 +28,8 @@
#include <mach/syslib.h>
#include <asm/barebox-arm.h>
+#define TPS62361_VSEL0_GPIO 7
+
void set_muxconf_regs(void);
static const struct ddr_regs ddr_regs_mt42L64M64_25_400_mhz = {
@@ -46,7 +48,8 @@ static const struct ddr_regs ddr_regs_mt42L64M64_25_400_mhz = {
static noinline void pcaaxl2_init_lowlevel(void)
{
struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
- struct dpll_param mpu = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
+ struct dpll_param mpu44xx = OMAP4_MPU_DPLL_PARAM_19M2_MPU1000;
+ struct dpll_param mpu4460 = OMAP4_MPU_DPLL_PARAM_19M2_MPU920;
struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
@@ -57,12 +60,16 @@ static noinline void pcaaxl2_init_lowlevel(void)
omap4_ddr_init(&ddr_regs_mt42L64M64_25_400_mhz, &core);
/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
- omap4_scale_vcores();
+ omap4_scale_vcores(TPS62361_VSEL0_GPIO);
writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);
/* Configure all DPLL's at 100% OPP */
- omap4_configure_mpu_dpll(&mpu);
+ if (omap4_revision() < OMAP4460_ES1_0)
+ omap4_configure_mpu_dpll(&mpu44xx);
+ else
+ omap4_configure_mpu_dpll(&mpu4460);
+
omap4_configure_iva_dpll(&iva);
omap4_configure_per_dpll(&per);
omap4_configure_abe_dpll(&abe);
diff --git a/arch/arm/boards/phycard-a-xl2/mux.c b/arch/arm/boards/phycard-a-xl2/mux.c
index 179e6b6..dc605e3 100644
--- a/arch/arm/boards/phycard-a-xl2/mux.c
+++ b/arch/arm/boards/phycard-a-xl2/mux.c
@@ -3,6 +3,7 @@
#include <io.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-mux.h>
+#include <mach/omap4-clock.h>
static const struct pad_conf_entry core_padconf_array[] = {
{GPMC_AD0, (IEN | PTD | DIS | M0)}, /* gpmc_ad0 */
@@ -242,4 +243,11 @@ void set_muxconf_regs(void)
omap4_do_set_mux(OMAP44XX_CONTROL_PADCONF_WKUP, wkup_padconf_array,
ARRAY_SIZE(wkup_padconf_array));
+
+ /* gpio_wk7 is used for controlling TPS on 4460 */
+ if (omap4_revision() >= OMAP4460_ES1_0) {
+ writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + PAD1_FREF_CLK4_REQ);
+ /* Enable GPIO-1 clocks before TPS initialization */
+ omap4_enable_gpio1_wup_clocks();
+ }
}
diff --git a/arch/arm/mach-omap/include/mach/omap4-clock.h b/arch/arm/mach-omap/include/mach/omap4-clock.h
index 391ee63..e5302d6 100644
--- a/arch/arm/mach-omap/include/mach/omap4-clock.h
+++ b/arch/arm/mach-omap/include/mach/omap4-clock.h
@@ -303,6 +303,8 @@ struct dpll_param {
#define OMAP4_MPU_DPLL_PARAM_38M4 {0x1a, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}
#define OMAP4_MPU_DPLL_PARAM_38M4_MPU600 {0x7d, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}
#define OMAP4_MPU_DPLL_PARAM_38M4_MPU1000 {0x69, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}
+/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
+#define OMAP4_MPU_DPLL_PARAM_19M2_MPU920 {0x23F, 0x11, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}
#define OMAP4_IVA_DPLL_PARAM_19M2 {0x61, 0x01, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00}
#define OMAP4_IVA_DPLL_PARAM_38M4 {0x61, 0x03, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00}
@@ -330,6 +332,8 @@ void omap4_configure_usb_dpll(const struct dpll_param *dpll_param);
void omap4_configure_core_dpll_no_lock(const struct dpll_param *param);
void omap4_lock_core_dpll(void);
void omap4_lock_core_dpll_shadow(const struct dpll_param *param);
+void omap4_enable_gpio1_wup_clocks(void);
+void omap4_enable_gpio_clocks(void);
void omap4_enable_all_clocks(void);
void omap4_do_scale_tps62361(u32 reg, u32 volt_mv);
diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c
index 564a748..1481f16 100644
--- a/arch/arm/mach-omap/omap4_clock.c
+++ b/arch/arm/mach-omap/omap4_clock.c
@@ -14,6 +14,10 @@ void omap4_configure_mpu_dpll(const struct dpll_param *dpll_param)
sr32(CM_AUTOIDLE_DPLL_MPU, 0, 3, 0x0); /* Disable DPLL autoidle */
+ /* Errata ID: i700, clear CM_CLKSEL_DPLL_MPU[22] : DCC_EN */
+ if (omap4_revision() >= OMAP4460_ES1_0)
+ sr32(CM_CLKSEL_DPLL_MPU, 0, 22, 0);
+
/* Set M,N,M2 values */
sr32(CM_CLKSEL_DPLL_MPU, 8, 11, dpll_param->m);
sr32(CM_CLKSEL_DPLL_MPU, 0, 6, dpll_param->n);
@@ -198,6 +202,27 @@ void omap4_lock_core_dpll_shadow(const struct dpll_param *param)
wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_CORE, LDELAY);
}
+void omap4_enable_gpio_clocks(void)
+{
+ sr32(CM_L4PER_GPIO2_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO2_CLKCTRL, LDELAY);
+ sr32(CM_L4PER_GPIO3_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO3_CLKCTRL, LDELAY);
+ sr32(CM_L4PER_GPIO4_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO4_CLKCTRL, LDELAY);
+ sr32(CM_L4PER_GPIO5_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO5_CLKCTRL, LDELAY);
+ sr32(CM_L4PER_GPIO6_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO6_CLKCTRL, LDELAY);
+}
+
+void omap4_enable_gpio1_wup_clocks(void)
+{
+ /* WKUP clocks */
+ sr32(CM_WKUP_GPIO1_CLKCTRL, 0, 32, 0x1);
+ wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_GPIO1_CLKCTRL, LDELAY);
+}
+
void omap4_enable_all_clocks(void)
{
/* Enable Ducati clocks */
@@ -255,16 +280,7 @@ void omap4_enable_all_clocks(void)
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER9_CLKCTRL, LDELAY);
/* GPIO clocks */
- sr32(CM_L4PER_GPIO2_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO3_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO4_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO4_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO5_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO5_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO6_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO6_CLKCTRL, LDELAY);
+ omap4_enable_gpio_clocks();
sr32(CM_L4PER_HDQ1W_CLKCTRL, 0, 32, 0x2);
@@ -314,8 +330,7 @@ void omap4_enable_all_clocks(void)
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_UART4_CLKCTRL, LDELAY);
/* WKUP clocks */
- sr32(CM_WKUP_GPIO1_CLKCTRL, 0, 32, 0x1);
- wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_GPIO1_CLKCTRL, LDELAY);
+ omap4_enable_gpio1_wup_clocks();
sr32(CM_WKUP_TIMER1_CLKCTRL, 0, 32, 0x01000002);
wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_TIMER1_CLKCTRL, LDELAY);
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-13 6:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-27 13:40 [PATCH 0/3] omap: 4460 support Jan Weitzel
2012-07-27 13:40 ` [PATCH 1/3] Add support for OMAP4460 TPS62361 Jan Weitzel
2012-08-03 16:57 ` Sascha Hauer
2012-08-13 6:07 ` Jan Weitzel [this message]
2012-08-13 19:08 ` [PATCH 3/3] OMAP4460: clock init Sascha Hauer
2012-07-27 13:40 ` [PATCH 2/3] OMAP4460: ram init changes Jan Weitzel
2012-07-27 14:13 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-27 15:12 ` Sascha Hauer
2012-08-02 10:55 ` [PATCH] OMAP4: use writel and readl Jan Weitzel
2012-08-13 12:32 ` [PATCH v2] " Jan Weitzel
2012-08-13 18:42 ` Sascha Hauer
2012-07-27 13:40 ` [PATCH 3/3] OMAP4460: clock init Jan Weitzel
2012-07-27 14:18 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-02 10:36 ` Jan Weitzel
2012-08-14 7:04 [PATCH 0/3 v2] omap: 4460 support Jan Weitzel
2012-08-14 7:04 ` [PATCH 3/3] OMAP4460: clock init Jan Weitzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344838047-19069-1-git-send-email-j.weitzel@phytec.de \
--to=j.weitzel@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox