From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/13] defaultenv: support kernel and oftree on a filesystem
Date: Mon, 20 Aug 2012 16:20:27 +0200 [thread overview]
Message-ID: <1345472428-17417-13-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1345472428-17417-1-git-send-email-jlu@pengutronix.de>
The path specified by kernel/oftree_path must be mounted
aready (either via automount or by the board code).
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
defaultenv/bin/boot | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/defaultenv/bin/boot b/defaultenv/bin/boot
index bf6ec76..81593bd 100644
--- a/defaultenv/bin/boot
+++ b/defaultenv/bin/boot
@@ -129,7 +129,14 @@ elif [ x$kernel_loc = xnand ]; then
fi
kdev="/dev/nand0.${kernel_mtd_nand}.bb"
elif [ x$kernel_loc = xdisk ]; then
- kdev="/dev/$kernel_part"
+ if [ -n $kernel_path ]; then
+ kdev="$kernel_path"
+ elif [ -n $kernel_part ]; then
+ kdev="/dev/$kernel_part"
+ else
+ echo "error: set either kernel_path or kernel_part"
+ exit 1
+ fi
else
echo "error: set kernel_loc to one of 'tftp', 'nfs', 'nand', 'nor' or 'disk'"
exit 1
@@ -145,7 +152,14 @@ elif [ x$oftree_loc = xnor ]; then
elif [ x$oftree_loc = xnand ]; then
odev="/dev/nand0.oftree.bb"
elif [ x$oftree_loc = xdisk ]; then
- odev="/dev/$oftree_part"
+ if [ -n $oftree_path ]; then
+ odev="$oftree_path"
+ elif [ -n $oftree_part ]; then
+ odev="/dev/$oftree_part"
+ else
+ echo "error: set either oftree_path or oftree_part"
+ exit 1
+ fi
fi
[ x$odev = x ] || bootm_opt="$bootm_opt -o $odev"
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-20 14:21 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 14:20 Jan Luebbe
2012-08-20 14:20 ` [PATCH 01/13] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-08-20 14:20 ` [PATCH 02/13] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-08-20 14:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:51 ` Jan Luebbe
2012-08-21 13:04 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 03/13] common: split out meminfo output and make it optional Jan Luebbe
2012-08-20 14:42 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:55 ` Jan Luebbe
2012-08-20 14:20 ` [PATCH 04/13] omap: add SPI as a boot mode for xload Jan Luebbe
2012-08-20 14:20 ` [PATCH 05/13] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-08-20 14:20 ` [PATCH 06/13] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:59 ` Jan Luebbe
2012-08-21 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 07/13] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:08 ` Jan Luebbe
2012-08-21 12:15 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 08/13] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-08-20 14:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:16 ` Jan Luebbe
2012-08-21 12:14 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 09/13] m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-08-20 14:20 ` [PATCH 10/13] defaultenv: support NAND and NOR kernel partitions at the same time Jan Luebbe
2012-08-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 11/13] defaultenv: use /env/oftree if it exists Jan Luebbe
2012-08-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` Jan Luebbe [this message]
2012-08-20 15:00 ` [PATCH 12/13] defaultenv: support kernel and oftree on a filesystem Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 13/13] omap3_clock: avoid initializing cores not present on TI AM35xx Jan Luebbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345472428-17417-13-git-send-email-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox