From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/7] smc911x: add 16bit bus width support
Date: Wed, 29 Aug 2012 07:06:14 +0200 [thread overview]
Message-ID: <1346216778-14100-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1346216778-14100-1-git-send-email-plagnioj@jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/net/smc911x.c | 34 +++++++++++++++++++++++++++++-----
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 2583235..917f994 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -76,7 +76,13 @@ static inline u32 smc911x_reg_read(struct smc911x_priv *priv, u32 reg)
return priv->reg_read(priv, reg);
}
-static inline u32 __smc911x_reg_read(struct smc911x_priv *priv, u32 reg)
+static inline u32 __smc911x_reg_readw(struct smc911x_priv *priv, u32 reg)
+{
+ return ((readw(priv->base + reg) & 0xFFFF) |
+ ((readw(priv->base + reg + 2) & 0xFFFF) << 16));
+}
+
+static inline u32 __smc911x_reg_readl(struct smc911x_priv *priv, u32 reg)
{
return readl(priv->base + reg);
}
@@ -87,7 +93,14 @@ static inline void smc911x_reg_write(struct smc911x_priv *priv, u32 reg,
priv->reg_write(priv, reg, val);
}
-static inline void __smc911x_reg_write(struct smc911x_priv *priv, u32 reg,
+static inline void __smc911x_reg_writew(struct smc911x_priv *priv, u32 reg,
+ u32 val)
+{
+ writew(val & 0xFFFF, priv->base + reg);
+ writew((val >> 16) & 0xFFFF, priv->base + reg + 2);
+}
+
+static inline void __smc911x_reg_writel(struct smc911x_priv *priv, u32 reg,
u32 val)
{
writel(val, priv->base + reg);
@@ -390,12 +403,23 @@ static int smc911x_probe(struct device_d *dev)
struct eth_device *edev;
struct smc911x_priv *priv;
uint32_t val;
- int i;
+ int i, is_32bit;
priv = xzalloc(sizeof(*priv));
+ is_32bit = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
+ if (!is_32bit)
+ is_32bit = 1;
+ else
+ is_32bit = is_32bit == IORESOURCE_MEM_32BIT;
priv->base = dev_request_mem_region(dev, 0);
- priv->reg_read = __smc911x_reg_read;
- priv->reg_write = __smc911x_reg_write;
+
+ if (is_32bit) {
+ priv->reg_read = __smc911x_reg_readl;
+ priv->reg_write = __smc911x_reg_writel;
+ } else {
+ priv->reg_read = __smc911x_reg_readw;
+ priv->reg_write = __smc911x_reg_writew;
+ }
val = smc911x_reg_read(priv, BYTE_TEST);
if(val != 0x87654321) {
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-29 5:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-29 4:27 [PATCH 0/7 2] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 2/7] smc911x: introduce read/write ops Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-08-29 5:06 ` [PATCH 4/7] smc911x: add support to pass the shift via platform data Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 5/7] smc911x: improve detection handle Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 6:52 ` Sascha Hauer
2012-08-29 8:36 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 9:04 ` Sascha Hauer
2012-08-29 5:06 ` [PATCH 6/7] smc911x: update chip detection Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 7/7] smm911x: check if the device is ready before using it Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 6:53 ` Sascha Hauer
2012-08-29 8:35 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 9:04 ` Sascha Hauer
2012-08-29 10:07 ` Christian Hemp
-- strict thread matches above, loose matches on Subject: below --
2012-09-01 8:47 [PATCH 0/7 v3] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-09-01 8:52 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-09-01 8:52 ` [PATCH 3/7] smc911x: add 16bit bus width support Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:25 [PATCH 0/7] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32 ` [PATCH 3/7] smc911x: add 16bit bus width support Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 20:21 ` Sascha Hauer
2012-08-15 4:30 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-27 14:20 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346216778-14100-3-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox