mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Weitzel <J.Weitzel@phytec.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] xload: get barebox size from barebox_arm_head
Date: Wed, 29 Aug 2012 10:01:58 +0200	[thread overview]
Message-ID: <1346227318.3280.1.camel@lws-weitzel> (raw)
In-Reply-To: <20120829065929.GO26594@pengutronix.de>

Am Mittwoch, den 29.08.2012, 08:59 +0200 schrieb Sascha Hauer:
> On Tue, Aug 28, 2012 at 02:36:21PM +0200, Jan Weitzel wrote:
> > Add functions to read the barebox_arm_head, check barebox magicword
> > and read out the barebox image size.
> > Create a inital partion of 1Mb to access the barebox image on nand.
> 
> The patch neither applies on next or on master. On which branch did you
> apply this?
Sorry, on a outdated branch with other omap4 nand stuff. I rebase the patch to master and send it after testing.
Jan

> Sascha
> 
> > 
> > Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> > ---
> > v2: remove fall back if header read fail 
> > 
> >  arch/arm/include/asm/barebox-arm-head.h |    4 ++
> >  arch/arm/mach-omap/include/mach/xload.h |    2 +-
> >  arch/arm/mach-omap/xload.c              |   58 ++++++++++++++++++++++++++++--
> >  3 files changed, 59 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/include/asm/barebox-arm-head.h b/arch/arm/include/asm/barebox-arm-head.h
> > index 0dc3074..521bcf6 100644
> > --- a/arch/arm/include/asm/barebox-arm-head.h
> > +++ b/arch/arm/include/asm/barebox-arm-head.h
> > @@ -1,6 +1,10 @@
> >  #ifndef __ASM_ARM_HEAD_H
> >  #define __ASM_ARM_HEAD_H
> >  
> > +#define ARM_HEAD_SIZE		0x30
> > +#define HEAD_MAGICWORD_OFFSET	0x20
> > +#define HEAD_SIZE_OFFSET	0x2C
> > +
> >  static inline void barebox_arm_head(void)
> >  {
> >  	__asm__ __volatile__ (
> > diff --git a/arch/arm/mach-omap/include/mach/xload.h b/arch/arm/mach-omap/include/mach/xload.h
> > index 844b57f..26f1b68 100644
> > --- a/arch/arm/mach-omap/include/mach/xload.h
> > +++ b/arch/arm/mach-omap/include/mach/xload.h
> > @@ -1,7 +1,7 @@
> >  #ifndef _MACH_XLOAD_H
> >  #define _MACH_XLOAD_H
> >  
> > -void *omap_xload_boot_nand(int offset, int size);
> > +void *omap_xload_boot_nand(int offset);
> >  void *omap_xload_boot_mmc(void);
> >  
> >  enum omap_boot_src {
> > diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> > index 9a6b0b4..0be0c50 100644
> > --- a/arch/arm/mach-omap/xload.c
> > +++ b/arch/arm/mach-omap/xload.c
> > @@ -7,16 +7,66 @@
> >  #include <fcntl.h>
> >  #include <mach/xload.h>
> >  #include <sizes.h>
> > +#include <asm/barebox-arm-head.h>
> >  
> > -void *omap_xload_boot_nand(int offset, int size)
> > +void *read_image_head(const char *name)
> >  {
> > +	void *header = xmalloc(ARM_HEAD_SIZE);
> > +	struct cdev *cdev;
> >  	int ret;
> > -	void *to = xmalloc(size);
> > +
> > +	cdev = cdev_open(name, O_RDONLY);
> > +	if (!cdev) {
> > +		printf("failed to open partition\n");
> > +		return NULL;
> > +	}
> > +
> > +	ret = cdev_read(cdev, header, ARM_HEAD_SIZE, 0, 0);
> > +	cdev_close(cdev);
> > +
> > +	if (ret != ARM_HEAD_SIZE) {
> > +		printf("failed to read from partition\n");
> > +		return NULL;
> > +	}
> > +
> > +	return header;
> > +}
> > +
> > +unsigned int get_image_size(void *head)
> > +{
> > +	unsigned int ret = 0;
> > +	unsigned int *psize = head + HEAD_SIZE_OFFSET;
> > +	const char *pmagic = head + HEAD_MAGICWORD_OFFSET;
> > +
> > +	if (!strcmp(pmagic, "barebox"))
> > +		ret = *psize;
> > +	debug("Detected barebox image size %u\n", ret);
> > +
> > +	return ret;
> > +}
> > +
> > +void *omap_xload_boot_nand(int offset)
> > +{
> > +	int ret;
> > +	int size;
> > +	void *to, *header;
> >  	struct cdev *cdev;
> >  
> > -	devfs_add_partition("nand0", offset, size, PARTITION_FIXED, "x");
> > +	devfs_add_partition("nand0", offset, SZ_1M, PARTITION_FIXED, "x");
> >  	dev_add_bb_dev("x", "bbx");
> >  
> > +	header = get_image_size(read_image_head("bbx"));
> > +	if (header == NULL)
> > +		return NULL;
> > +
> > +	size = get_image_size(header);
> > +	if (!size) {
> > +		printf("failed to get image size\n");
> > +		return NULL;
> > +	}
> > +
> > +	to = xmalloc(size);
> > +
> >  	cdev = cdev_open("bbx", O_RDONLY);
> >  	if (!cdev) {
> >  		printf("failed to open nand\n");
> > @@ -80,7 +130,7 @@ int run_shell(void)
> >  		printf("unknown boot source. Fall back to nand\n");
> >  	case OMAP_BOOTSRC_NAND:
> >  		printf("booting from NAND\n");
> > -		func = omap_xload_boot_nand(SZ_128K, SZ_512K);
> > +		func = omap_xload_boot_nand(SZ_128K);
> >  		break;
> >  	}
> >  
> > -- 
> > 1.7.0.4
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
> 



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-08-29  8:02 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-27 10:56 [RFC] " Jan Weitzel
2012-08-28  6:54 ` Sascha Hauer
2012-08-28  8:41   ` Jan Weitzel
2012-08-28  9:08     ` Sascha Hauer
2012-08-28 12:36       ` [PATCH v2] " Jan Weitzel
2012-08-29  6:59         ` Sascha Hauer
2012-08-29  8:01           ` Jan Weitzel [this message]
2012-08-29  9:10             ` [PATCH v3] " Jan Weitzel
2012-08-29 12:21               ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04  7:34                 ` Jan Weitzel
2012-09-04  9:28                   ` Sascha Hauer
2012-09-04 12:27                     ` Jan Weitzel
2012-09-04 14:41                       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05  8:22                         ` [PATCH v4] " Jan Weitzel
2012-09-05 10:34                           ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 11:37                             ` Suspected ##SPAM## -:Re: " Jan Weitzel
2012-09-05 12:02                               ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346227318.3280.1.camel@lws-weitzel \
    --to=j.weitzel@phytec.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox