From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1T8V6i-0001IX-47 for barebox@lists.infradead.org; Mon, 03 Sep 2012 11:46:27 +0000 From: Jan Luebbe Date: Mon, 3 Sep 2012 13:46:02 +0200 Message-Id: <1346672765-16162-8-git-send-email-jlu@pengutronix.de> In-Reply-To: <1346672765-16162-1-git-send-email-jlu@pengutronix.de> References: <1346672765-16162-1-git-send-email-jlu@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 07/10] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch To: barebox@lists.infradead.org It start the switch and provides basic access to the registers. This driver could also work with some other Micrel switches, possibly with some small changes. Signed-off-by: Jan Luebbe --- drivers/net/Kconfig | 7 ++ drivers/net/Makefile | 1 + drivers/net/ksz8864rmn.c | 233 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 241 insertions(+) create mode 100644 drivers/net/ksz8864rmn.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 749ea6a..0fa4f14 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -126,5 +126,12 @@ config DRIVER_NET_DESIGNWARE_ALTDESCRIPTOR source "drivers/net/usb/Kconfig" +config DRIVER_NET_MICREL + depends on SPI + bool "Micrel KSZ8864RMN Ethernet Switch driver" + help + This option enables support for enabling the Micrel + KSZ8864RMN Ethernet Switch over SPI. + endmenu diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 29727b7..b589240 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_NET_USB) += usb/ obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o obj-$(CONFIG_DRIVER_NET_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_DRIVER_NET_DESIGNWARE) += designware.o +obj-$(CONFIG_DRIVER_NET_MICREL) += ksz8864rmn.o diff --git a/drivers/net/ksz8864rmn.c b/drivers/net/ksz8864rmn.c new file mode 100644 index 0000000..5851463 --- /dev/null +++ b/drivers/net/ksz8864rmn.c @@ -0,0 +1,233 @@ +/* + * Copyright (C) 2012 Jan Luebbe, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +#define REG_ID0 0x00 +#define REG_ID1 0x01 + +#define REG_GC00 0x02 +#define REG_GC01 0x03 +#define REG_GC02 0x04 +#define REG_GC03 0x05 +#define REG_GC04 0x06 +#define REG_GC05 0x07 +#define REG_GC06 0x08 +#define REG_GC07 0x09 +#define REG_GC08 0x0a +#define REG_GC09 0x0b +#define REG_GC10 0x0c +#define REG_GC11 0x0d + +#define REG_PSTAT1(p) (0x10 * p + 0xe) +#define REG_PSTAT2(p) (0x10 * p + 0xf) + +#define CMD_WRITE 0x02 +#define CMD_READ 0x03 + +struct micrel_switch_priv { + struct cdev cdev; + struct spi_device *spi; +}; + +static int micrel_switch_read_reg(struct spi_device *spi, uint8_t reg) +{ + uint8_t tx[2]; + uint8_t rx[1]; + int ret; + + tx[0] = CMD_READ; + tx[1] = reg; + + ret = spi_write_then_read(spi, tx, 2, rx, 1); + if (ret < 0) + return ret; + + return rx[0]; +} + +static void micrel_switch_write_reg(struct spi_device *spi, uint8_t reg, uint8_t val) +{ + uint8_t tx[3]; + + tx[0] = CMD_WRITE; + tx[1] = reg; + tx[2] = val; + + spi_write_then_read(spi, tx, 3, NULL, 0); +} + +static int micrel_switch_enable_set(struct device_d *dev, struct param_d *param, + const char *val) +{ + struct spi_device *spi = (struct spi_device *)dev->type_data; + int enable; + char *new; + + if (!val) + return dev_param_set_generic(dev, param, NULL); + + enable = simple_strtoul(val, NULL, 0); + + if (enable) { + micrel_switch_write_reg(spi, REG_ID1, 1); + new = "1"; + } else { + micrel_switch_write_reg(spi, REG_ID1, 0); + new = "0"; + } + + dev_param_set_generic(dev, param, new); + + return 0; +} + +static void micrel_switch_print_reg(struct spi_device *spi, const char *name, uint8_t reg) +{ + uint8_t tx[2]; + uint8_t rx[1]; + int ret; + + tx[0] = CMD_READ; + tx[1] = reg; + + ret = spi_write_then_read(spi, tx, 2, rx, 1); + if (ret < 0) + printf("%s@0x%02x: SPI error\n", name, reg); + + printf("%s@0x%02x: 0x%02x\n", name, reg, rx[0]); +} + +static void micrel_switch_info(struct device_d *dev) +{ + struct spi_device *spi = (struct spi_device *)dev->type_data; + + printf("Registers:\n"); + micrel_switch_print_reg(spi, " Chip ID 0", REG_ID0); + micrel_switch_print_reg(spi, " Chip ID 1", REG_ID1); + micrel_switch_print_reg(spi, " Global Control 0", REG_GC00); + micrel_switch_print_reg(spi, " Global Control 1", REG_GC01); + micrel_switch_print_reg(spi, " Global Control 2", REG_GC02); + micrel_switch_print_reg(spi, " Global Control 3", REG_GC03); + micrel_switch_print_reg(spi, " Global Control 4", REG_GC04); + micrel_switch_print_reg(spi, " Global Control 5", REG_GC05); + micrel_switch_print_reg(spi, " Global Control 6", REG_GC06); + micrel_switch_print_reg(spi, " Global Control 7", REG_GC07); + micrel_switch_print_reg(spi, " Global Control 8", REG_GC08); + micrel_switch_print_reg(spi, " Global Control 9", REG_GC09); + micrel_switch_print_reg(spi, " Global Control 10", REG_GC10); + micrel_switch_print_reg(spi, " Global Control 11", REG_GC11); + micrel_switch_print_reg(spi, " Port 1 Status 1", REG_PSTAT1(1)); + micrel_switch_print_reg(spi, " Port 1 Status 2", REG_PSTAT2(1)); + micrel_switch_print_reg(spi, " Port 2 Status 1", REG_PSTAT1(2)); + micrel_switch_print_reg(spi, " Port 2 Status 2", REG_PSTAT2(2)); +} + +static ssize_t micel_switch_read(struct cdev *cdev, void *_buf, size_t count, loff_t offset, ulong flags) +{ + int i, ret; + uint8_t *buf = _buf; + struct micrel_switch_priv *priv = cdev->priv; + + for (i = 0; i < count; i++) { + ret = micrel_switch_read_reg(priv->spi, offset); + if (ret < 0) + return ret; + *buf = ret; + buf++; + offset++; + } + + return count; +} + +static ssize_t micel_switch_write(struct cdev *cdev, const void *_buf, size_t count, loff_t offset, ulong flags) +{ + int i; + const uint8_t *buf = _buf; + struct micrel_switch_priv *priv = cdev->priv; + + for (i = 0; i < count; i++) { + micrel_switch_write_reg(priv->spi, offset, *buf); + buf++; + offset++; + } + + return count; +} + +static struct file_operations micrel_switch_ops = { + .read = micel_switch_read, + .write = micel_switch_write, + .lseek = dev_lseek_default, +}; + +static int micrel_switch_probe(struct device_d *dev) +{ + struct micrel_switch_priv *priv; + int ret = 0; + + priv = xzalloc(sizeof(*priv)); + + dev->priv = priv; + + priv->spi = (struct spi_device *)dev->type_data; + priv->spi->mode = SPI_MODE_0; + priv->spi->bits_per_word = 8; + + ret = micrel_switch_read_reg(priv->spi, REG_ID0); + if (ret < 0) { + dev_err(&priv->spi->dev, "failed to read device id\n"); + return ret; + } + if (ret != 0x95) { + dev_err(&priv->spi->dev, "unknown device id: %02x\n", ret); + return -ENODEV; + } + + priv->cdev.name = asprintf("switch%d", dev->id); + priv->cdev.size = 256; + priv->cdev.ops = &micrel_switch_ops; + priv->cdev.priv = priv; + priv->cdev.dev = dev; + devfs_create(&priv->cdev); + + dev_add_param(dev, "enable", micrel_switch_enable_set, NULL, 0); + dev_set_param(dev, "enable", "1"); + + return 0; +} + +static struct driver_d micrel_switch_driver = { + .name = "ksz8864rmn", + .probe = micrel_switch_probe, + .info = micrel_switch_info, +}; + +static int micrel_switch_init(void) +{ + register_driver(&micrel_switch_driver); + return 0; +} +device_initcall(micrel_switch_init); -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox