From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.phycard.de ([217.6.246.34] helo=root.phytec.de) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1T98qx-0001q4-TG for barebox@lists.infradead.org; Wed, 05 Sep 2012 06:12:45 +0000 Message-ID: <1346825557.3625.4.camel@lws-weitzel> From: Jan Weitzel Date: Wed, 05 Sep 2012 08:12:37 +0200 In-Reply-To: <50462CE6.10607@webware-experts.de> References: <50462CE6.10607@webware-experts.de> Mime-Version: 1.0 Reply-To: J.Weitzel@phytec.de List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: MLO doesn't work, rest is ok To: Norbert Roos Cc: barebox@lists.infradead.org Am Dienstag, den 04.09.2012, 18:31 +0200 schrieb Norbert Roos: > Hello, > > I just wanted to try the freshly generated MLO and barebox.bin on my > Phytec PCM049 board (OMAP4 based). Copied both files to the FAT > partition on the SD card. > > Unfortunately it doesn't boot, after trying to boot from SD card the ROM > boot loader oviously skips to booting from UART. > > When i replace the MLO with a different one (downloaded a compiled one), > my generated barebox.bin gets loaded and everything's fine. > > Is there a simple way for debugging it? It seems like the MLO does not > get executed, as the ROM boot skips to UART boot... > > bye > Norbert Hi, which barebox version? Is the board with OMAP4460? Jan > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox