mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 14/23] net fec: Switch to clk support
Date: Mon, 24 Sep 2012 13:04:43 +0200	[thread overview]
Message-ID: <1348484692-24993-15-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1348484692-24993-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/net/fec_imx.c |   27 ++++++++++++++++++++++++---
 drivers/net/fec_imx.h |    1 +
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index 6acf6bd..4606558 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -24,6 +24,8 @@
 #include <clock.h>
 #include <xfuncs.h>
 #include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/mmu.h>
 
@@ -43,6 +45,19 @@ struct fec_frame {
 	uint8_t head[16];	/* MAC header(6 + 6 + 2) + 2(aligned) */
 };
 
+#ifdef CONFIG_COMMON_CLK
+static inline unsigned long fec_clk_get_rate(struct fec_priv *fec)
+{
+	return clk_get_rate(fec->clk);
+}
+#else
+static inline unsigned long fec_clk_get_rate(struct fec_priv *fec)
+{
+	return imx_get_fecclk();
+}
+#endif
+
+
 /*
  * MII-interface related functions
  */
@@ -54,7 +69,7 @@ static int fec_miibus_read(struct mii_bus *bus, int phyAddr, int regAddr)
 	uint32_t phy;		/* convenient holder for the PHY */
 	uint64_t start;
 
-	writel(((imx_get_fecclk() >> 20) / 5) << 1,
+	writel(((fec_clk_get_rate(fec) >> 20) / 5) << 1,
 			fec->regs + FEC_MII_SPEED);
 	/*
 	 * reading from any PHY's register is done by properly
@@ -97,7 +112,7 @@ static int fec_miibus_write(struct mii_bus *bus, int phyAddr,
 	uint32_t phy;		/* convenient holder for the PHY */
 	uint64_t start;
 
-	writel(((imx_get_fecclk() >> 20) / 5) << 1,
+	writel(((fec_clk_get_rate(fec) >> 20) / 5) << 1,
 			fec->regs + FEC_MII_SPEED);
 
 	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
@@ -290,7 +305,7 @@ static int fec_init(struct eth_device *dev)
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
 		 */
-		writel(((imx_get_fecclk() >> 20) / 5) << 1,
+		writel(((fec_clk_get_rate(fec) >> 20) / 5) << 1,
 				fec->regs + FEC_MII_SPEED);
 	}
 
@@ -628,6 +643,12 @@ static int fec_probe(struct device_d *dev)
 	edev->set_ethaddr = fec_set_hwaddr;
 	edev->parent = dev;
 
+#ifdef CONFIG_COMMON_CLK
+	fec->clk = clk_get(dev, NULL);
+	if (IS_ERR(fec->clk))
+		return PTR_ERR(fec->clk);
+#endif
+
 	fec->regs = dev_request_mem_region(dev, 0);
 
 	/* Reset chip. */
diff --git a/drivers/net/fec_imx.h b/drivers/net/fec_imx.h
index d10385a..d147dca 100644
--- a/drivers/net/fec_imx.h
+++ b/drivers/net/fec_imx.h
@@ -138,6 +138,7 @@ struct fec_priv {
 	u32 phy_flags;
 	struct mii_bus miibus;
 	void (*phy_init)(struct phy_device *dev);
+	struct clk *clk;
 };
 
 /**
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-09-24 11:05 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-24 11:04 [PATCH] common " Sascha Hauer
2012-09-24 11:04 ` [PATCH 01/23] err.h: introduce IS_ERR_OR_NULL Sascha Hauer
2012-09-24 11:04 ` [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase Sascha Hauer
2012-09-26 16:02   ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 17:25     ` Sascha Hauer
2012-09-26 18:53       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:09         ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:08       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 21:31         ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 03/23] clk: initial common clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 04/23] commands: Add clk commands Sascha Hauer
2012-09-24 11:04 ` [PATCH 05/23] ARM i.MX: initial clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 06/23] ARM i.MX27: implement " Sascha Hauer
2012-09-24 11:04 ` [PATCH 07/23] ARM i.MX25: Switch to common " Sascha Hauer
2012-09-24 11:04 ` [PATCH 08/23] ARM i.MX5: " Sascha Hauer
2012-09-24 11:36   ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 09/23] ARM i.MX1: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 10/23] ARM i.MX31: Switch to common clk Sascha Hauer
2012-09-24 11:04 ` [PATCH 11/23] ARM i.MX6: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 12/23] ARM i.MX21: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 13/23] ARM i.MX35: " Sascha Hauer
2012-09-24 11:04 ` Sascha Hauer [this message]
2012-09-26 16:07   ` [PATCH 14/23] net fec: Switch to clk support Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 15/23] serial i.MX: " Sascha Hauer
2012-09-26 16:08   ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 16/23] spi " Sascha Hauer
2012-09-24 11:04 ` [PATCH 17/23] ARM i.MX: Switch clocksource to clk_get Sascha Hauer
2012-09-24 11:04 ` [PATCH 18/23] mci i.MX ESDHC: Switch to clock support Sascha Hauer
2012-09-24 11:04 ` [PATCH 19/23] mci i.MX: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 20/23] i2c " Sascha Hauer
2012-09-26 16:10   ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 21/23] video " Sascha Hauer
2012-09-24 11:04 ` [PATCH 22/23] video i.MX IPU: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 23/23] ARM i.MX: Remove old " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348484692-24993-15-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox