From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 17/23] ARM i.MX: Switch clocksource to clk_get
Date: Mon, 24 Sep 2012 13:04:46 +0200 [thread overview]
Message-ID: <1348484692-24993-18-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1348484692-24993-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/clocksource.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/clocksource.c b/arch/arm/mach-imx/clocksource.c
index 2c6f6a0..df018e6 100644
--- a/arch/arm/mach-imx/clocksource.c
+++ b/arch/arm/mach-imx/clocksource.c
@@ -29,6 +29,8 @@
#include <init.h>
#include <clock.h>
#include <errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <notifier.h>
#include <mach/imx-regs.h>
#include <mach/clock.h>
@@ -46,6 +48,8 @@
#define IMX31_TCTL_CLKSOURCE_IPG (1 << 6) /* Clock source bit position */
#define TCTL_TEN (1 << 0) /* Timer enable */
+static struct clk *clk_gpt;
+
struct imx_gpt_regs {
unsigned int tcn;
uint32_t tctl_val;
@@ -77,7 +81,7 @@ static struct clocksource cs = {
static int imx_clocksource_clock_change(struct notifier_block *nb, unsigned long event, void *data)
{
- cs.mult = clocksource_hz2mult(imx_get_gptclk(), cs.shift);
+ cs.mult = clocksource_hz2mult(clk_get_rate(clk_gpt), cs.shift);
return 0;
}
@@ -89,6 +93,7 @@ static int imx_gpt_probe(struct device_d *dev)
{
int i;
int ret;
+ unsigned long rate;
/* one timer is enough */
if (timer_base)
@@ -118,10 +123,18 @@ static int imx_gpt_probe(struct device_d *dev)
for (i = 0; i < 100; i++)
writel(0, timer_base + GPT_TCTL); /* We have no udelay by now */
+ clk_gpt = clk_get(dev, NULL);
+ if (IS_ERR(clk_gpt)) {
+ rate = 20000000;
+ dev_err(dev, "failed to get clock\n");
+ } else {
+ rate = clk_get_rate(clk_gpt);
+ }
+
writel(0, timer_base + GPT_TPRER);
writel(regs->tctl_val, timer_base + GPT_TCTL);
- cs.mult = clocksource_hz2mult(imx_get_gptclk(), cs.shift);
+ cs.mult = clocksource_hz2mult(rate, cs.shift);
init_clock(&cs);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-24 11:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 11:04 [PATCH] common clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 01/23] err.h: introduce IS_ERR_OR_NULL Sascha Hauer
2012-09-24 11:04 ` [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase Sascha Hauer
2012-09-26 16:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 17:25 ` Sascha Hauer
2012-09-26 18:53 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:09 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 21:31 ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 03/23] clk: initial common clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 04/23] commands: Add clk commands Sascha Hauer
2012-09-24 11:04 ` [PATCH 05/23] ARM i.MX: initial clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 06/23] ARM i.MX27: implement " Sascha Hauer
2012-09-24 11:04 ` [PATCH 07/23] ARM i.MX25: Switch to common " Sascha Hauer
2012-09-24 11:04 ` [PATCH 08/23] ARM i.MX5: " Sascha Hauer
2012-09-24 11:36 ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 09/23] ARM i.MX1: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 10/23] ARM i.MX31: Switch to common clk Sascha Hauer
2012-09-24 11:04 ` [PATCH 11/23] ARM i.MX6: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 12/23] ARM i.MX21: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 13/23] ARM i.MX35: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 14/23] net fec: Switch to clk support Sascha Hauer
2012-09-26 16:07 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 15/23] serial i.MX: " Sascha Hauer
2012-09-26 16:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 16/23] spi " Sascha Hauer
2012-09-24 11:04 ` Sascha Hauer [this message]
2012-09-24 11:04 ` [PATCH 18/23] mci i.MX ESDHC: Switch to clock support Sascha Hauer
2012-09-24 11:04 ` [PATCH 19/23] mci i.MX: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 20/23] i2c " Sascha Hauer
2012-09-26 16:10 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 21/23] video " Sascha Hauer
2012-09-24 11:04 ` [PATCH 22/23] video i.MX IPU: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 23/23] ARM i.MX: Remove old " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348484692-24993-18-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox