From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 20/23] i2c i.MX: Switch to clock support
Date: Mon, 24 Sep 2012 13:04:49 +0200 [thread overview]
Message-ID: <1348484692-24993-21-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1348484692-24993-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/i2c/busses/i2c-imx.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 2ac043b..98c06f0 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -37,7 +37,7 @@
#include <malloc.h>
#include <types.h>
#include <xfuncs.h>
-
+#include <linux/clk.h>
#include <linux/err.h>
#include <io.h>
@@ -101,6 +101,7 @@ static u16 i2c_clk_div[50][2] = {
struct fsl_i2c_struct {
void __iomem *base;
+ struct clk *clk;
struct i2c_adapter adapter;
unsigned int disable_delay;
int stopped;
@@ -109,6 +110,19 @@ struct fsl_i2c_struct {
};
#define to_fsl_i2c_struct(a) container_of(a, struct fsl_i2c_struct, adapter)
+#ifdef CONFIG_COMMON_CLK
+static inline unsigned long i2c_fsl_clk_get_rate(struct fsl_i2c_struct *i2c_fsl)
+{
+ return clk_get_rate(i2c_fsl->clk);
+}
+
+#else
+static inline unsigned long i2c_fsl_clk_get_rate(struct fsl_i2c_struct *i2c_fsl)
+{
+ return fsl_get_i2cclk();
+}
+#endif
+
#ifdef CONFIG_I2C_DEBUG
static void i2c_fsl_dump_reg(struct i2c_adapter *adapter)
{
@@ -344,7 +358,7 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
int i;
/* Divider value calculation */
- i2c_clk_rate = fsl_get_i2cclk();
+ i2c_clk_rate = i2c_fsl_clk_get_rate(i2c_fsl);
div = (i2c_clk_rate + rate - 1) / rate;
if (div < i2c_clk_div[0][0])
i = 0;
@@ -535,6 +549,11 @@ static int __init i2c_fsl_probe(struct device_d *pdev)
i2c_fsl = kzalloc(sizeof(struct fsl_i2c_struct), GFP_KERNEL);
+#ifdef CONFIG_COMMON_CLK
+ i2c_fsl->clk = clk_get(pdev, NULL);
+ if (IS_ERR(i2c_fsl->clk))
+ return PTR_ERR(i2c_fsl->clk);
+#endif
/* Setup i2c_fsl driver structure */
i2c_fsl->adapter.master_xfer = i2c_fsl_xfer;
i2c_fsl->adapter.nr = pdev->id;
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-24 11:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 11:04 [PATCH] common clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 01/23] err.h: introduce IS_ERR_OR_NULL Sascha Hauer
2012-09-24 11:04 ` [PATCH 02/23] clk clkdev: Add clkdev matching based on physbase Sascha Hauer
2012-09-26 16:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 17:25 ` Sascha Hauer
2012-09-26 18:53 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:09 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 19:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-26 21:31 ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 03/23] clk: initial common clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 04/23] commands: Add clk commands Sascha Hauer
2012-09-24 11:04 ` [PATCH 05/23] ARM i.MX: initial clk support Sascha Hauer
2012-09-24 11:04 ` [PATCH 06/23] ARM i.MX27: implement " Sascha Hauer
2012-09-24 11:04 ` [PATCH 07/23] ARM i.MX25: Switch to common " Sascha Hauer
2012-09-24 11:04 ` [PATCH 08/23] ARM i.MX5: " Sascha Hauer
2012-09-24 11:36 ` Sascha Hauer
2012-09-24 11:04 ` [PATCH 09/23] ARM i.MX1: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 10/23] ARM i.MX31: Switch to common clk Sascha Hauer
2012-09-24 11:04 ` [PATCH 11/23] ARM i.MX6: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 12/23] ARM i.MX21: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 13/23] ARM i.MX35: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 14/23] net fec: Switch to clk support Sascha Hauer
2012-09-26 16:07 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 15/23] serial i.MX: " Sascha Hauer
2012-09-26 16:08 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 16/23] spi " Sascha Hauer
2012-09-24 11:04 ` [PATCH 17/23] ARM i.MX: Switch clocksource to clk_get Sascha Hauer
2012-09-24 11:04 ` [PATCH 18/23] mci i.MX ESDHC: Switch to clock support Sascha Hauer
2012-09-24 11:04 ` [PATCH 19/23] mci i.MX: " Sascha Hauer
2012-09-24 11:04 ` Sascha Hauer [this message]
2012-09-26 16:10 ` [PATCH 20/23] i2c " Jean-Christophe PLAGNIOL-VILLARD
2012-09-24 11:04 ` [PATCH 21/23] video " Sascha Hauer
2012-09-24 11:04 ` [PATCH 22/23] video i.MX IPU: " Sascha Hauer
2012-09-24 11:04 ` [PATCH 23/23] ARM i.MX: Remove old " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348484692-24993-21-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox