mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC] add 'miitool' command to view media-independent interface status
Date: Mon,  8 Oct 2012 00:17:33 +0400	[thread overview]
Message-ID: <1349641053-18685-1-git-send-email-antonynpavlov@gmail.com> (raw)

This command is based on "mii-diag" and "mii-tool" programs.

TODO:
 * drop MII_ANER_ and MII_AN_, use linux/mii.h macros;
 * add routines to manipulate media-independent interface state.

EXAMPLES:

barebox:/ mii_tool -v /dev/phy0
negotiated 100baseTx-FD, link ok

barebox:/ mii_tool -v /dev/phy0
negotiated 100baseTx-FD, link ok
  product info: Level One LXT971A rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

barebox:/ mii_tool -vv /dev/phy0
negotiated 100baseTx-FD, link ok
  registers for MII PHY:
    3100 782d 0013 78e2 01e1 45e1 0007 2001
    0000 ffff ffff ffff ffff ffff ffff ffff
    0084 4780 0000 0000 0422 0000 0000 0000
    0000 0000 0080 0000 ffff 0000 0000 3660
  product info: Level One LXT971A rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 commands/Kconfig    |    8 ++
 commands/Makefile   |    1 +
 commands/miitool.c  |  266 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mii.h |   25 +++++
 4 files changed, 300 insertions(+)
 create mode 100644 commands/miitool.c

diff --git a/commands/Kconfig b/commands/Kconfig
index e934f29..7da722f 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -620,6 +620,14 @@ config CMD_USB
 	help
 	  The usb command allows to rescan for USB devices.
 
+config CMD_MIITOOL
+	bool
+	prompt "miitool command"
+	depends on NET
+	default y
+	help
+	  The miitool command allows to view media-independent interface status.
+
 config CMD_CLK
 	tristate
 	depends on COMMON_CLK
diff --git a/commands/Makefile b/commands/Makefile
index 610be55..c6416ca 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -76,3 +76,4 @@ obj-$(CONFIG_CMD_READLINK)	+= readlink.o
 obj-$(CONFIG_CMD_LN)		+= ln.o
 obj-$(CONFIG_CMD_CLK)		+= clk.o
 obj-$(CONFIG_CMD_TFTP)		+= tftp.o
+obj-$(CONFIG_CMD_MIITOOL)	+= miitool.o
diff --git a/commands/miitool.c b/commands/miitool.c
new file mode 100644
index 0000000..5303531
--- /dev/null
+++ b/commands/miitool.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2012 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is based on Donald Becker's "mii-diag" and
+ * David A. Hinds's "mii-tool".
+ *
+ * mii-tool is written/copyright 2000 by David A. Hinds
+ *     <dhinds@pcmcia.sourceforge.org>
+ *
+ * mii-diag is written/copyright 1997-2000 by Donald Becker
+ *     <becker@scyld.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <init.h>
+#include <driver.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <linux/stat.h>
+#include <xfuncs.h>
+#include <linux/mii.h>
+
+#ifdef	CMD_MII_TOOL_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+static u16 mdio_read(int fd, int offset)
+{
+	int ret;
+	u16 buf;
+
+	ret = lseek(fd, offset << 1, SEEK_SET);
+	if (ret < 0) {
+		return 0;
+	}
+
+	ret = read(fd, &buf, sizeof(u16));
+	if (ret < 0) {
+		return 0;
+	}
+
+	return buf;
+}
+
+/* Table of known MII's */
+static struct {
+	u_short	id1, id2;
+	u_short	mask1, mask2;
+	char	*name;
+} mii_id[] = {
+	{ 0x7810, 0x0003, 0xffff, 0xffff, "Level One LXT970A" },
+	{ 0x7810, 0x0000, 0xffff, 0xfff0, "Level One LXT970/LXT971" },
+	{ 0x0013, 0x78e0, 0xffff, 0xfff0, "Level One LXT971A" },
+};
+#define NMII (sizeof(mii_id)/sizeof(mii_id[0]))
+
+const struct {
+	char	*name;
+	u_short	value;
+} media[] = {
+	/* The order through 100baseT4 matches bits in the BMSR */
+	{ "10baseT-HD",	MII_AN_10BASET_HD },
+	{ "10baseT-FD",	MII_AN_10BASET_FD },
+	{ "100baseTx-HD",	ADVERTISE_100HALF },
+	{ "100baseTx-FD",	ADVERTISE_100FULL },
+	{ "100baseT4",	LPA_100BASE4 },
+	{ "100baseTx",	ADVERTISE_100FULL | ADVERTISE_100HALF },
+	{ "10baseT",	MII_AN_10BASET_FD | MII_AN_10BASET_HD },
+};
+#define NMEDIA (sizeof(media)/sizeof(media[0]))
+
+static char *media_list(int mask, int best)
+{
+	static char buf[100];
+	int i;
+	*buf = '\0';
+	mask >>= 5;
+	for (i = 4; i >= 0; i--) {
+	if (mask & (1 << i)) {
+		strcat(buf, " ");
+		strcat(buf, media[i].name);
+		if (best) break;
+	}
+	}
+	if (mask & (1 << 5))
+		strcat(buf, " flow-control");
+
+	return buf;
+}
+
+static int verbose = 0;
+
+static int show_basic_mii(int fd)
+{
+	char buf[100];
+	int i, mii_val[32];
+	int bmcr, bmsr, advert, lkpar;
+
+	/* Some bits in the BMSR are latched, but we can't rely on being
+	   the only reader, so only the current values are meaningful */
+	mdio_read(fd, MII_BMSR);
+	for (i = 0; i < ((verbose > 1) ? 32 : 8); i++)
+		mii_val[i] = mdio_read(fd, i);
+
+	if (mii_val[MII_BMCR] == 0xffff) {
+		fprintf(stderr, "  No MII transceiver present!.\n");
+		return -1;
+	}
+
+	/* Descriptive rename. */
+	bmcr = mii_val[MII_BMCR]; bmsr = mii_val[MII_BMSR];
+	advert = mii_val[MII_ADVERTISE]; lkpar = mii_val[MII_LPA];
+
+	buf[0] = 0;
+	if (bmcr & BMCR_ANENABLE) {
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			if (advert & lkpar) {
+				strcat(buf, (lkpar & LPA_LPACK) ?
+					"negotiated" : "no autonegotiation,");
+				strcat(buf, media_list(advert & lkpar, 1));
+				strcat(buf, ", ");
+			} else {
+				strcat(buf, "autonegotiation failed, ");
+			}
+		} else if (bmcr & BMCR_ANRESTART) {
+		strcat(buf, "autonegotiation restarted, ");
+		}
+	} else {
+		sprintf(buf+strlen(buf), "%s Mbit, %s duplex, ",
+			(bmcr & BMCR_SPEED100) ? "100" : "10",
+			(bmcr & BMCR_FULLDPLX) ? "full" : "half");
+	}
+	strcat(buf, (bmsr & BMSR_LSTATUS) ? "link ok" : "no link");
+
+	printf("%s\n", buf);
+
+	if (verbose > 1) {
+		printf("  registers for MII PHY: ");
+		for (i = 0; i < 32; i++)
+			printf("%s %4.4x", ((i % 8) ? "" : "\n   "), mii_val[i]);
+
+		printf("\n");
+	}
+
+	if (verbose) {
+		printf("  product info: ");
+		for (i = 0; i < NMII; i++)
+			if ((mii_id[i].id1 == (mii_val[2] & mii_id[i].mask1)) &&
+				(mii_id[i].id2 == (mii_val[3] & mii_id[i].mask2)))
+				break;
+
+		if (i < NMII)
+			printf("%s rev %d\n", mii_id[i].name, mii_val[3]&0x0f);
+		else
+			printf("vendor %02x:%02x:%02x, model %d rev %d\n",
+				mii_val[2]>>10, (mii_val[2]>>2)&0xff,
+				((mii_val[2]<<6)|(mii_val[3]>>10))&0xff,
+				(mii_val[3]>>4)&0x3f, mii_val[3]&0x0f);
+
+		printf("  basic mode:   ");
+		if (bmcr & BMCR_RESET)
+			printf("software reset, ");
+		if (bmcr & BMCR_LOOPBACK)
+			printf("loopback, ");
+		if (bmcr & BMCR_ISOLATE)
+			printf("isolate, ");
+		if (bmcr & BMCR_CTST)
+			printf("collision test, ");
+		if (bmcr & BMCR_ANENABLE) {
+			printf("autonegotiation enabled\n");
+		} else {
+			printf("%s Mbit, %s duplex\n",
+			   (bmcr & BMCR_SPEED100) ? "100" : "10",
+			   (bmcr & BMCR_FULLDPLX) ? "full" : "half");
+		}
+		printf("  basic status: ");
+		if (bmsr & BMSR_ANEGCOMPLETE)
+			printf("autonegotiation complete, ");
+		else if (bmcr & BMCR_ANRESTART)
+			printf("autonegotiation restarted, ");
+		if (bmsr & BMSR_RFAULT)
+			printf("remote fault, ");
+		printf((bmsr & BMSR_LSTATUS) ? "link ok" : "no link");
+		printf("\n  capabilities:%s", media_list(bmsr >> 6, 0));
+		printf("\n  advertising: %s", media_list(advert, 0));
+
+		if (lkpar & MII_AN_ABILITY_MASK)
+			printf("\n  link partner:%s", media_list(lkpar, 0));
+		printf("\n");
+	}
+
+	return 0;
+}
+
+static int do_miitool(int argc, char *argv[])
+{
+	char *filename;
+	int opt;
+	int argc_min;
+	int fd;
+
+	verbose = 0;
+	while ((opt = getopt(argc, argv, "v")) > 0) {
+		switch (opt) {
+		case 'v':
+			verbose++;
+			break;
+		}
+	}
+
+	argc_min = optind + 1;
+
+	if (argc < argc_min)
+		return COMMAND_ERROR_USAGE;
+
+	filename = argv[optind];
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0) {
+		printf("unable to read %s\n", filename);
+		return COMMAND_ERROR;
+	}
+
+	show_basic_mii(fd);
+
+	close(fd);
+
+	return COMMAND_SUCCESS;
+}
+
+BAREBOX_CMD_HELP_START(miitool)
+BAREBOX_CMD_HELP_USAGE("miitool [[[-v] -v] -v] <phy>\n")
+BAREBOX_CMD_HELP_SHORT("view status for MII <phy>.\n")
+BAREBOX_CMD_HELP_END
+
+/**
+ * @page miitool_command
+This utility checks or sets the status of a network interface's
+Media Independent Interface (MII) unit. Most fast ethernet
+adapters use an MII to autonegotiate link speed and duplex setting.
+ */
+BAREBOX_CMD_START(miitool)
+	.cmd		= do_miitool,
+	.usage		= "view media-independent interface status",
+	BAREBOX_CMD_HELP(cmd_miitool_help)
+BAREBOX_CMD_END
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 5bac6c2..e685b6c 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -90,6 +90,31 @@
 #define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
 				  ADVERTISE_100HALF | ADVERTISE_100FULL)
 
+/* Auto-Negotiation Advertisement Register */
+#define MII_ANAR		0x04
+/* Auto-Negotiation Link Partner Ability Register */
+#define MII_ANLPAR		0x05
+#define  MII_AN_NEXT_PAGE	0x8000
+#define  MII_AN_ACK		0x4000
+#define  MII_AN_REMOTE_FAULT	0x2000
+#define  MII_AN_ABILITY_MASK	0x07e0
+#define  MII_AN_FLOW_CONTROL	0x0400
+#define  MII_AN_100BASET4	0x0200
+#define  MII_AN_100BASETX_FD	0x0100
+#define  MII_AN_100BASETX_HD	0x0080
+#define  MII_AN_10BASET_FD	0x0040
+#define  MII_AN_10BASET_HD	0x0020
+#define  MII_AN_PROT_MASK	0x001f
+#define  MII_AN_PROT_802_3	0x0001
+
+/* Auto-Negotiation Expansion Register */
+#define MII_ANER		0x06
+#define  MII_ANER_MULT_FAULT	0x0010
+#define  MII_ANER_LP_NP_ABLE	0x0008
+#define  MII_ANER_NP_ABLE	0x0004
+#define  MII_ANER_PAGE_RX	0x0002
+#define  MII_ANER_LP_AN_ABLE	0x0001
+
 /* Link partner ability register. */
 #define LPA_SLCT		0x001f	/* Same as advertise selector  */
 #define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2012-10-07 20:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-07 20:17 Antony Pavlov [this message]
2012-10-08 20:47 ` Sascha Hauer
2012-10-09  7:39   ` Antony Pavlov
2012-10-10  8:53     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1349641053-18685-1-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox