From: Vicente <vicencb@gmail.com>
To: barebox@lists.infradead.org
Cc: Vicente <vicencb@gmail.com>
Subject: [PATCH 02/13] omap4: add rename definitions to match datasheet
Date: Mon, 8 Oct 2012 00:01:16 +0200 [thread overview]
Message-ID: <1349647287-28224-3-git-send-email-vicencb@gmail.com> (raw)
In-Reply-To: <1349647287-28224-1-git-send-email-vicencb@gmail.com>
Signed-off-by: Vicente <vicencb@gmail.com>
---
arch/arm/boards/panda/mux.c | 52 ++++++++--------
arch/arm/boards/pcm049/mux.c | 44 +++++++-------
arch/arm/boards/phycard-a-xl2/mux.c | 46 +++++++-------
arch/arm/mach-omap/include/mach/omap4-mux.h | 80 ++++++++++++++++---------
arch/arm/mach-omap/include/mach/omap4-silicon.h | 13 ++++
5 files changed, 136 insertions(+), 99 deletions(-)
diff --git a/arch/arm/boards/panda/mux.c b/arch/arm/boards/panda/mux.c
index 3783006..8225aa6 100644
--- a/arch/arm/boards/panda/mux.c
+++ b/arch/arm/boards/panda/mux.c
@@ -212,31 +212,31 @@ static const struct pad_conf_entry core_padconf_array[] = {
};
static const struct pad_conf_entry wkup_padconf_array[] = {
- { PAD0_SIM_IO, IEN | M0 /* sim_io */ },
- { PAD1_SIM_CLK, M0 /* sim_clk */ },
- { PAD0_SIM_RESET, M0 /* sim_reset */ },
- { PAD1_SIM_CD, PTU | IEN | M0 /* sim_cd */ },
- { PAD0_SIM_PWRCTRL, M0 /* sim_pwrctrl */ },
- { PAD1_SR_SCL, PTU | IEN | M0 /* sr_scl */ },
- { PAD0_SR_SDA, PTU | IEN | M0 /* sr_sda */ },
- { PAD1_FREF_XTAL_IN, M0 /* # */ },
- { PAD0_FREF_SLICER_IN, M0 /* fref_slicer_in */ },
- { PAD1_FREF_CLK_IOREQ, M0 /* fref_clk_ioreq */ },
- { PAD0_FREF_CLK0_OUT, M2 /* sys_drm_msecure */ },
- { PAD1_FREF_CLK3_REQ, PTU | IEN | M0 /* # */ },
- { PAD0_FREF_CLK3_OUT, M0 /* fref_clk3_out */ },
- { PAD1_FREF_CLK4_REQ, PTU | IEN | M0 /* # */ },
- { PAD0_FREF_CLK4_OUT, M0 /* # */ },
- { PAD1_SYS_32K, IEN | M0 /* sys_32k */ },
- { PAD0_SYS_NRESPWRON, M0 /* sys_nrespwron */ },
- { PAD1_SYS_NRESWARM, M0 /* sys_nreswarm */ },
- { PAD0_SYS_PWR_REQ, PTU | M0 /* sys_pwr_req */ },
- { PAD1_SYS_PWRON_RESET, M3 /* gpio_wk29 */ },
- { PAD0_SYS_BOOT6, IEN | M3 /* gpio_wk9 */ },
- { PAD1_SYS_BOOT7, IEN | M3 /* gpio_wk10 */ },
- { PAD1_FREF_CLK3_REQ, M3 /* gpio_wk30 */ },
- { PAD1_FREF_CLK4_REQ, M3 /* gpio_wk7 */ },
- { PAD0_FREF_CLK4_OUT, M3 /* gpio_wk8 */ },
+ { GPIO_WK0, IEN | M0 /* sim_io */ },
+ { GPIO_WK1, M0 /* sim_clk */ },
+ { GPIO_WK2, M0 /* sim_reset */ },
+ { GPIO_WK3, PTU | IEN | M0 /* sim_cd */ },
+ { GPIO_WK4, M0 /* sim_pwrctrl */ },
+ { SR_SCL, PTU | IEN | M0 /* sr_scl */ },
+ { SR_SDA, PTU | IEN | M0 /* sr_sda */ },
+ { FREF_XTAL_IN, M0 /* # */ },
+ { FREF_SLICER_IN, M0 /* fref_slicer_in */ },
+ { FREF_CLK_IOREQ, M0 /* fref_clk_ioreq */ },
+ { FREF_CLK0_OUT, M2 /* sys_drm_msecure */ },
+ { FREF_CLK3_REQ, PTU | IEN | M0 /* # */ },
+ { FREF_CLK3_OUT, M0 /* fref_clk3_out */ },
+ { FREF_CLK4_REQ, PTU | IEN | M0 /* # */ },
+ { FREF_CLK4_OUT, M0 /* # */ },
+ { SYS_32K, IEN | M0 /* sys_32k */ },
+ { SYS_NRESPWRON, M0 /* sys_nrespwron */ },
+ { SYS_NRESWARM, M0 /* sys_nreswarm */ },
+ { SYS_PWR_REQ, PTU | M0 /* sys_pwr_req */ },
+ { SYS_PWRON_RESET_OUT, M3 /* gpio_wk29 */ },
+ { SYS_BOOT6, IEN | M3 /* gpio_wk9 */ },
+ { SYS_BOOT7, IEN | M3 /* gpio_wk10 */ },
+ { FREF_CLK3_REQ, M3 /* gpio_wk30 */ },
+ { FREF_CLK4_REQ, M3 /* gpio_wk7 */ },
+ { FREF_CLK4_OUT, M3 /* gpio_wk8 */ },
};
void set_muxconf_regs(void)
@@ -249,7 +249,7 @@ void set_muxconf_regs(void)
/* gpio_wk7 is used for controlling TPS on 4460 */
if (omap4_revision() >= OMAP4460_ES1_0) {
- writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + PAD1_FREF_CLK4_REQ);
+ writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + FREF_CLK4_REQ);
/* Enable GPIO-1 clocks before TPS initialization */
omap4_enable_gpio1_wup_clocks();
}
diff --git a/arch/arm/boards/pcm049/mux.c b/arch/arm/boards/pcm049/mux.c
index 04e1d67..35eb0a3 100644
--- a/arch/arm/boards/pcm049/mux.c
+++ b/arch/arm/boards/pcm049/mux.c
@@ -212,28 +212,28 @@ static const struct pad_conf_entry core_padconf_array[] = {
};
static const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (SAFE_MODE)}, /* nc */
- {PAD1_SIM_CLK, (SAFE_MODE)}, /* nc */
- {PAD0_SIM_RESET, (SAFE_MODE)}, /* nc */
- {PAD1_SIM_CD, (SAFE_MODE)}, /* nc */
- {PAD0_SIM_PWRCTRL, (SAFE_MODE)}, /* nc */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (SAFE_MODE)}, /* nc */
- {PAD1_FREF_CLK_IOREQ, (SAFE_MODE)}, /* nc */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (IEN | M3)}, /* gpio_wk30 */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (M0)}, /* fref_clk4_req */
- {PAD0_FREF_CLK4_OUT, (M0)}, /* fref_clk4_out */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M0)}, /* sys_pwron_reset_out */
- {PAD0_SYS_BOOT6, (M0)}, /* sys_boot6 */
- {PAD1_SYS_BOOT7, (M0)}, /* sys_boot7 */
+ {GPIO_WK0, (SAFE_MODE)}, /* nc */
+ {GPIO_WK1, (SAFE_MODE)}, /* nc */
+ {GPIO_WK2, (SAFE_MODE)}, /* nc */
+ {GPIO_WK3, (SAFE_MODE)}, /* nc */
+ {GPIO_WK4, (SAFE_MODE)}, /* nc */
+ {SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {FREF_XTAL_IN, (M0)}, /* # */
+ {FREF_SLICER_IN, (SAFE_MODE)}, /* nc */
+ {FREF_CLK_IOREQ, (SAFE_MODE)}, /* nc */
+ {FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {FREF_CLK3_REQ, (IEN | M3)}, /* gpio_wk30 */
+ {FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {FREF_CLK4_REQ, (M0)}, /* fref_clk4_req */
+ {FREF_CLK4_OUT, (M0)}, /* fref_clk4_out */
+ {SYS_32K, (IEN | M0)}, /* sys_32k */
+ {SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {SYS_PWRON_RESET_OUT, (M0)}, /* sys_pwron_reset_out */
+ {SYS_BOOT6, (M0)}, /* sys_boot6 */
+ {SYS_BOOT7, (M0)}, /* sys_boot7 */
};
void set_muxconf_regs(void)
diff --git a/arch/arm/boards/phycard-a-xl2/mux.c b/arch/arm/boards/phycard-a-xl2/mux.c
index dc605e3..a31d995 100644
--- a/arch/arm/boards/phycard-a-xl2/mux.c
+++ b/arch/arm/boards/phycard-a-xl2/mux.c
@@ -212,28 +212,28 @@ static const struct pad_conf_entry core_padconf_array[] = {
};
static const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (SAFE_MODE)}, /* tbd */
- {PAD1_SIM_CLK, (SAFE_MODE)}, /* nc */
- {PAD0_SIM_RESET, (SAFE_MODE)}, /* nc */
- {PAD1_SIM_CD, (SAFE_MODE)}, /* nc */
- {PAD0_SIM_PWRCTRL, (SAFE_MODE)}, /* nc */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (SAFE_MODE)}, /* nc */
- {PAD1_FREF_CLK_IOREQ, (SAFE_MODE)}, /* nc */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (SAFE_MODE)}, /* nc */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (IEN | M3)}, /* gpio_wk7 */
- {PAD0_FREF_CLK4_OUT, (M0)}, /* fref_clk4_out */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M0)}, /* sys_pwron_reset_out */
- {PAD0_SYS_BOOT6, (M0)}, /* sys_boot6 */
- {PAD1_SYS_BOOT7, (M0)}, /* sys_boot7 */
+ {GPIO_WK0, (SAFE_MODE)}, /* tbd */
+ {GPIO_WK1, (SAFE_MODE)}, /* nc */
+ {GPIO_WK2, (SAFE_MODE)}, /* nc */
+ {GPIO_WK3, (SAFE_MODE)}, /* nc */
+ {GPIO_WK4, (SAFE_MODE)}, /* nc */
+ {SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {FREF_XTAL_IN, (M0)}, /* # */
+ {FREF_SLICER_IN, (SAFE_MODE)}, /* nc */
+ {FREF_CLK_IOREQ, (SAFE_MODE)}, /* nc */
+ {FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {FREF_CLK3_REQ, (SAFE_MODE)}, /* nc */
+ {FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {FREF_CLK4_REQ, (IEN | M3)}, /* gpio_wk7 */
+ {FREF_CLK4_OUT, (M0)}, /* fref_clk4_out */
+ {SYS_32K, (IEN | M0)}, /* sys_32k */
+ {SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {SYS_PWRON_RESET_OUT, (M0)}, /* sys_pwron_reset_out */
+ {SYS_BOOT6, (M0)}, /* sys_boot6 */
+ {SYS_BOOT7, (M0)}, /* sys_boot7 */
};
void set_muxconf_regs(void)
@@ -246,7 +246,7 @@ void set_muxconf_regs(void)
/* gpio_wk7 is used for controlling TPS on 4460 */
if (omap4_revision() >= OMAP4460_ES1_0) {
- writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + PAD1_FREF_CLK4_REQ);
+ writew(M3, OMAP44XX_CONTROL_PADCONF_WKUP + FREF_CLK4_REQ);
/* Enable GPIO-1 clocks before TPS initialization */
omap4_enable_gpio1_wup_clocks();
}
diff --git a/arch/arm/mach-omap/include/mach/omap4-mux.h b/arch/arm/mach-omap/include/mach/omap4-mux.h
index 9ed6486..9088631 100644
--- a/arch/arm/mach-omap/include/mach/omap4-mux.h
+++ b/arch/arm/mach-omap/include/mach/omap4-mux.h
@@ -32,6 +32,7 @@ struct pad_conf_entry {
} __attribute__ ((packed));
+#define WAKEUP_EN (1 << 14)
#ifdef CONFIG_OFF_PADCONF
#define OFF_PD (1 << 12)
#define OFF_PU (3 << 12)
@@ -123,14 +124,23 @@ struct pad_conf_entry {
#define GPMC_WAIT0 0x008A
#define GPMC_WAIT1 0x008C
#define C2C_DATA11 0x008E
+#define GPMC_WAIT2 0x008E
#define C2C_DATA12 0x0090
+#define GPMC_NCS4 0x0090
#define C2C_DATA13 0x0092
+#define GPMC_NCS5 0x0092
#define C2C_DATA14 0x0094
+#define GPMC_NCS6 0x0094
#define C2C_DATA15 0x0096
+#define GPMC_NCS7 0x0096
#define HDMI_HPD 0x0098
+#define GPIO63 0x0098
#define HDMI_CEC 0x009A
+#define GPIO64 0x009A
#define HDMI_DDC_SCL 0x009C
+#define GPIO65 0x009C
#define HDMI_DDC_SDA 0x009E
+#define GPIO66 0x009E
#define CSI21_DX0 0x00A0
#define CSI21_DY0 0x00A2
#define CSI21_DX1 0x00A4
@@ -242,17 +252,29 @@ struct pad_conf_entry {
#define USBB2_HSIC_DATA 0x0178
#define USBB2_HSIC_STROBE 0x017A
#define UNIPRO_TX0 0x017C
+#define KPD_COL3 0x017C
#define UNIPRO_TY0 0x017E
+#define KPD_COL4 0x017E
#define UNIPRO_TX1 0x0180
+#define KPD_COL5 0x0180
#define UNIPRO_TY1 0x0182
+#define KPD_COL0 0x0182
#define UNIPRO_TX2 0x0184
+#define KPD_COL1 0x0184
#define UNIPRO_TY2 0x0186
+#define KPD_COL2 0x0186
#define UNIPRO_RX0 0x0188
+#define KPD_ROW3 0x0188
#define UNIPRO_RY0 0x018A
+#define KPD_ROW4 0x018A
#define UNIPRO_RX1 0x018C
+#define KPD_ROW5 0x018C
#define UNIPRO_RY1 0x018E
+#define KPD_ROW0 0x018E
#define UNIPRO_RX2 0x0190
+#define KPD_ROW1 0x0190
#define UNIPRO_RY2 0x0192
+#define KPD_ROW2 0x0192
#define USBA0_OTG_CE 0x0194
#define USBA0_OTG_DP 0x0196
#define USBA0_OTG_DM 0x0198
@@ -286,6 +308,8 @@ struct pad_conf_entry {
#define DPM_EMU17 0x01D0
#define DPM_EMU18 0x01D2
#define DPM_EMU19 0x01D4
+#define CSI22_DX2 0x01D6
+#define CSI22_DY2 0x01F4
#define WAKEUPEVENT_0 0x01D8
#define WAKEUPEVENT_1 0x01DC
#define WAKEUPEVENT_2 0x01E0
@@ -297,34 +321,34 @@ struct pad_conf_entry {
#define WKUP_REVISION 0x0000
#define WKUP_HWINFO 0x0004
#define WKUP_SYSCONFIG 0x0010
-#define PAD0_SIM_IO 0x0040
-#define PAD1_SIM_CLK 0x0042
-#define PAD0_SIM_RESET 0x0044
-#define PAD1_SIM_CD 0x0046
-#define PAD0_SIM_PWRCTRL 0x0048
-#define PAD1_SR_SCL 0x004A
-#define PAD0_SR_SDA 0x004C
-#define PAD1_FREF_XTAL_IN 0x004E
-#define PAD0_FREF_SLICER_IN 0x0050
-#define PAD1_FREF_CLK_IOREQ 0x0052
-#define PAD0_FREF_CLK0_OUT 0x0054
-#define PAD1_FREF_CLK3_REQ 0x0056
-#define PAD0_FREF_CLK3_OUT 0x0058
-#define PAD1_FREF_CLK4_REQ 0x005A
-#define PAD0_FREF_CLK4_OUT 0x005C
-#define PAD1_SYS_32K 0x005E
-#define PAD0_SYS_NRESPWRON 0x0060
-#define PAD1_SYS_NRESWARM 0x0062
-#define PAD0_SYS_PWR_REQ 0x0064
-#define PAD1_SYS_PWRON_RESET 0x0066
-#define PAD0_SYS_BOOT6 0x0068
-#define PAD1_SYS_BOOT7 0x006A
-#define PAD0_JTAG_NTRST 0x006C
-#define PAD1_JTAG_TCK 0x006D
-#define PAD0_JTAG_RTCK 0x0070
-#define PAD1_JTAG_TMS_TMSC 0x0072
-#define PAD0_JTAG_TDI 0x0074
-#define PAD1_JTAG_TDO 0x0076
+#define GPIO_WK0 0x0040
+#define GPIO_WK1 0x0042
+#define GPIO_WK2 0x0044
+#define GPIO_WK3 0x0046
+#define GPIO_WK4 0x0048
+#define SR_SCL 0x004A
+#define SR_SDA 0x004C
+#define FREF_XTAL_IN 0x004E
+#define FREF_SLICER_IN 0x0050
+#define FREF_CLK_IOREQ 0x0052
+#define FREF_CLK0_OUT 0x0054
+#define FREF_CLK3_REQ 0x0056
+#define FREF_CLK3_OUT 0x0058
+#define FREF_CLK4_REQ 0x005A
+#define FREF_CLK4_OUT 0x005C
+#define SYS_32K 0x005E
+#define SYS_NRESPWRON 0x0060
+#define SYS_NRESWARM 0x0062
+#define SYS_PWR_REQ 0x0064
+#define SYS_PWRON_RESET_OUT 0x0066
+#define SYS_BOOT6 0x0068
+#define SYS_BOOT7 0x006A
+#define JTAG_NTRST 0x006C
+#define JTAG_TCK 0x006E
+#define JTAG_RTCK 0x0070
+#define JTAG_TMS_TMSC 0x0072
+#define JTAG_TDI 0x0074
+#define JTAG_TDO 0x0076
#define PADCONF_WAKEUPEVENT_0 0x007C
#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0
#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 345e09a..71ffe39 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -72,6 +72,12 @@
#define OMAP44XX_UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
#define OMAP44XX_UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000)
+/* I2C */
+#define OMAP44XX_I2C1_BASE (OMAP44XX_L4_PER_BASE + 0x070000)
+#define OMAP44XX_I2C2_BASE (OMAP44XX_L4_PER_BASE + 0x072000)
+#define OMAP44XX_I2C3_BASE (OMAP44XX_L4_PER_BASE + 0x060000)
+#define OMAP44XX_I2C4_BASE (OMAP44XX_L4_PER_BASE + 0x350000)
+
/* General Purpose Timers */
#define OMAP44XX_GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000)
#define OMAP44XX_GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000)
@@ -88,6 +94,13 @@
/* 32KTIMER */
#define OMAP_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
+/* MMC */
+#define OMAP44XX_MMC1_BASE (OMAP44XX_L4_PER_BASE + 0x09C100)
+#define OMAP44XX_MMC2_BASE (OMAP44XX_L4_PER_BASE + 0x0B4100)
+#define OMAP44XX_MMC3_BASE (OMAP44XX_L4_PER_BASE + 0x0AD100)
+#define OMAP44XX_MMC4_BASE (OMAP44XX_L4_PER_BASE + 0x0D1100)
+#define OMAP44XX_MMC5_BASE (OMAP44XX_L4_PER_BASE + 0x0D5100)
+
/* GPMC */
#define OMAP_GPMC_BASE 0x50000000
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-10-07 22:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-07 22:01 [PATCH 00/13] archosg9: add support for tablet, fourth round Vicente
2012-10-07 22:01 ` [PATCH 01/13] twl6030: add debug info Vicente
2012-10-07 22:01 ` Vicente [this message]
2012-10-07 22:01 ` [PATCH 03/13] ARM: ensure irqs are disabled Vicente
2012-10-08 20:21 ` Sascha Hauer
2012-10-07 22:01 ` [PATCH 04/13] omap: revert gpiolib Vicente
2012-10-07 22:01 ` [PATCH 05/13] omap4: add usb boot source Vicente
2012-10-07 22:01 ` [PATCH 06/13] bootm: close open files Vicente
2012-10-08 20:18 ` Sascha Hauer
2012-10-08 21:02 ` vj
2012-10-07 22:01 ` [PATCH 07/13] uimage: improve transfer speed Vicente
2012-10-08 20:01 ` Sascha Hauer
2012-10-08 20:48 ` vj
2012-10-07 22:01 ` [PATCH 08/13] fs: improve robustness Vicente
2012-10-07 22:01 ` [PATCH 09/13] omap4: add support for booting cpu from usb Vicente
2012-10-07 22:01 ` [PATCH 10/13] omap4: add serial communications over usb boot Vicente
2012-10-07 22:01 ` [PATCH 11/13] omap4: add filesystem support " Vicente
2012-10-07 22:01 ` [PATCH 12/13] omap4: add support for loading second stage from usb Vicente
2012-10-07 22:01 ` [PATCH 13/13] Add support for Archos G9 tablet Vicente
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349647287-28224-3-git-send-email-vicencb@gmail.com \
--to=vicencb@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox